DS-3WF02C-5AC/O V2
Wireless Bridge
The wireless bridge can be applied in industries, such as wireless video security, railway, transportation, power and other
industries, wireless video/data transmission, wireless coverage, carrier wireless backbone network construction, Wi-Fi
wireless coverage, rural information construction, and wireless network coverage. The long-distance transmission of the
device can guarantee multi-channel HD video transmission.
All gigabit LAN ports
TDMA supported
Quick match through DIP switch
Visualized topology management
Up to 5 km wireless transmission distance
Specification
Wireless Parameter
Max. Transmission Rate of Air
≤ 867 Mbps
Interface
Wireless Standard IEEE 802.11/a/n/ac
5150 MHz ~ 5250 MHz, 5250 MHz~ 5350 MHz, 5470 MHz~ 5725 MHz, 5725 MHz~
Working Frequency Band
5850 MHz
Antenna Gain 12 dBi
Antenna Angle (H) Beamwidth [3 dB] 35° (V) Beamwidth [3 dB] 35°
Transmitting Power 22 dBm @11ac MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity -84±2dBm@AC80-MCS0
PTP:
230 Mbps/0.5 KM(AC80),
200 Mbps/1 KM(AC80),
Throughput Rate
40 Mbps/5 KM(AC80);
PTMP(1 to 8):
80 Mbps/1 KM(AC80)
Hardware Parameter
Network Interface 2 × 1000 Mbps RJ45 ports
LED Indicator Power indicator, LAN indicator, Signal intensity indicator
Reset Hardware resetting button
Power Supply 12 VDC/1 A Passive PoE
General
Product Dimensions (W × H × D) 92 mm × 187 mm × 58 mm (3.62'' × 7.36'' × 2.28'')
Package Dimensions (W × H × D) 132 mm × 228 mm × 91 mm (5.19" × 8.97" × 3.58")
Net Weight 0.307 kg (0.677 lb)
Gross Weight 0.807 kg (1.779 lb)
Wireless Bridge × 1, Power Adapter (12 VDC, 1 A) × 1, Binding Tape × 2, Quick Start
Packing List
Guide ×1
Packing Method Single unit packing
Working Temperature -30 °C to 70 °C (-22 °F to 158 °F)
Working Humidity 5% to 95% (no condensation)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Storage Humidity 5% to 95% (no condensation)
Installation Mode Pole Mounting
Ingress Protection IP55
Power Consumption 2.65 W for typical (1-ch 2MP IPC), Max. 4.5 W
Software Function
Application Function TDMA, DFS, TPC, IFM, IPM
Channel Width 20/40/80 MHz
Channel Selection Auto/manual selection
NTP (network time synchronization), SADP (auto search for IP address), HTTPS (web
Network Protocol
management), SSH (debugging)
Security Mode WPA2-PSK
Security Mechanism Wireless network name hidden
Management Method Web, iVMS-4200, HCP
Upgrade Web, iVMS-4200, HCP
System Log Syslog, Control center information
Approval
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1:
EMC 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020), IC (ICES-003: Issue
7:2020), RCM (AS/NZS CISPR 32: 2015)
UL (UL 60950-1), CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition),
Safety
CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006)
Radio EN 301 893, EN 300 440, EN 62311, EN 301 489-3, EN 301 489-17, FCC Part 15.247
Typical Application
Physical Interface
Interface/Button Description
CPE/AP DIP Switch Switch up or down to set the device as AP or CPE.
4-character SSID to realize 16 kinds of matching ways by switching up or down. The CPE will connect
SSID
to the AP when its SSID matches the AP's
PoE/LAN1 The 10/100/1000 Mbps adaptive RJ45 port, also can be used as a PoE port.
LAN2 The 10/100/1000 Mbps adaptive RJ45 port.
Reset Long press for 4 sec to restore to factory settings.
If the PoE injector is not used for powering on the device, you can use the attached power adapter to
DC 12V
connect the device to socket.
Available Model
DS-3WF02C-5AC/OV2
Dimension
