Scribd
Upload
4 views

Zettex Firefoam

Zettex Fire Foam is a single-part, fire-resistant polyurethane foam that hardens by absorbing moisture from the air, offering excellent temperature and noise insulation, and strong adhesion to various surfaces. It is fire retardant for up to 180 minutes and is suitable for sealing openings in walls, floors, and roofs. The product is available in a 750 ml spray can and is ozone-friendly, containing no CFCs, HCFCs, or HFCs.

Uploaded by

msalhabdh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Zettex Firefoam

Zettex Fire Foam is a single-part, fire-resistant polyurethane foam that hardens by absorbing moisture from the air, offering excellent temperature and noise insulation, and strong adhesion to various surfaces. It is fire retardant for up to 180 minutes and is suitable for sealing openings in walls, floors, and roofs. The product is available in a 750 ml spray can and is ozone-friendly, containing no CFCs, HCFCs, or HFCs.

Uploaded by

msalhabdh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET

Fire Foam

Zettex Europe B.V.


Plaza 20, 4782 SK Moerdijk
The Netherlands
+31 (0)888-93 88 39
[email protected]
www.zettex.com

Product description
Zettex Fire Foam is a single-part fire-resistant polyurethane foam. This foam hardens with the absorption of
moisture from the air. This cured fire-resistant foam has excellent temperature and noise insulation with strong
adhesive properties. It adheres to different surfaces apart from PTFE, polyethylene and silicone surfaces. The
foam is sensitive to UV-light and sunlight.

Material
Single-component polyurethane foam. Without CFC, HCFC and HFC (ozone-friendly and does not contribute to
the greenhouse effect).

Advantages
- Fire retardant up to max. 180 min.
- Excellent sealing against smoke and gas
- B1 Fire class (DIN 4102-1)
- Yield to max. 42 l
- Strong adhesion to most construction materials
- Timesaving for the builder
- Professional dosage unit: more accurate and efficient application
- Excellent physical properties
- Excellent temperature and noise insulation
- Mould and moisture resistant
- Finished with plaster
- Can be painted over

Areas of application
Zettex Firefoam works excellently for the fire-retarding assembly of window and door frames, fire and smoke
retarding sealing of all openings in walls, floors and roofs and other applications where fire-retarding properties
are required.
Zettex Firefoam adheres to most usual building materials: concrete, brick, plaster, foam polystyrene, PVC, metal
and wooden elements.

Available form
Spray can 750 ml

Application instructions
The Fire Foam can be fixed on the Zettex Foamgun. This enables optimal Fire Foam spraying. Shake the can
thoroughly 20 times before use. This ensures optimal adhesion of the Fire Foam. After spraying the Zettex
Foamgun can be cleaned with Zettex Foamcleaner and hands can be cleaned with Zettex Cleaning Wipes.

Safety recommendations
See safety information sheet.

Certificates

1/2
Properties Specifications
Basis Polyurethane
Propellant Without CFC, HCFC and HFC
Processing temperature 5ºC to +30 ºC optimal: +15 ºC to +20 ºC
Density cured foam 25 – 30 kg/m³
Skin formation time 12 – 16 min. (+23 ºC, 50%)
Time before cutting (30 mm rul) 30 – 40 min. (+23 ºC, 50%)
Fully loadable (20 mm rul) 24 hours (+23 ºC, 50%)
Temperature resistance ‐ 40ºC/+90 ºC
Temperature resistance short time ‐ 40ºC/+130 ºC
Reaction to Fire DIN 4102-1 B1
Fire-resistance classification EN 1366 El 20 – El 180
Volume shrinkage none
Volume increase 30%
Flash point of hardened foam 400 ºC
Tensile strength BS 5241 8 N/cm2
Shear strength at 10% DIN 53421 2.5 N/cm2
Coefficient of heat conduction 0.034 W/(m·K)
Noise reduction index RST,w 60 dB
Temperature resistance of hardened foam Long-term: -50 to +90
short-term: - 65 to +130
Yield (released product) Approx. 40 litres
12 months after filling date. Spray can must be stored
Shelf life and transported in vertical position. Store in a cool
and dry place. Store at temperatures of 5°C - 25°C.
The specific values are obtained at +23 °C and 50% air humidity, unless mentioned otherwise.

Fire-resistance tested according to European standard EN 1366-4:

Joint depth, mm 100 100 100 100 200 200 200 200
Joint width, mm 40 30 20 10 40 30 20 10
EI, min 45 45 60 60 120 120 150 180

2/2

You might also like