1) A square prism 35mm sides of base and 65mm axis length rests on HP on one of its edges of the base

which is inclined to
VP at 300, Draw the projection of the prism when the axis is inclined to HP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

2) A square prism35mm sides of base and 60mm axis length rests on HP on one of its corners of the base such that the
two base edges containing the corner on which it rests make equal inclinations with HP. Draw the projections of the prism
when the axis of the prism is inclined to HP at 400 and appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

 3) A square prism 35mm sides of base and 60mm axis length rests on HP on one of its corner of the base such that the two
base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the prism when
the axis of the prism is inclined to HP at 400 and to VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

 4) A square prism 35mm sides of base and 60mm axis length rests on HP on one of its edges of the base, Draw the
projections of the prism when the axis is inclined to HP at 450 and VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

5) A pentagonal prism 25mm of base and 60mm axis length rests on HP on one of its edges of the base which is inclined to
VP at 300, Draw the projections of the prism when the axis is inclined to HP at 40 0

Base nearer to observer

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19
6) A pentagonal prism 25mm of base and 60mm axis length rests on HP on one of its edges of the base, Draw the projections
of the prism when the axis is inclined to HP at 400 and VP to 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

7) A pentagonal prism 25mm of base and 50mm axis length rests on HP on one of its corners of the base such that the two
base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the prism when the
axis of the prism is inclined to HP at 400 and appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

8) A pentagonal prism 25mm of base and 50mm axis length rests on HP on one of its corners of the base such that the two
base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the prism when the
axis of the prism is inclined to HP at 400 and to VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

9) A hexagonal prism 25mm sides of base and 50mm axis length rests on HP on one of its edges, Draw the projections of the
prism when the axis is inclined to HP at 450 and appears to be inclined to Vp 400

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

10) A hexagonal prism 25mm sides of base and 50mm axis length rests on HP on one of its edges of the base, Draw the
projections of the prism when the axis is inclined to HP at 450 and VP 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

11) A hexagonal prism 25mm sides of baser and 50mm axis length rests on HP on one of its corners of the base such that the
two base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the prism when
the axis of the prism is inclined to HP at 400 and appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

12) A hexagonal prism 25mm sides of base and 50mm axis length rests on HP on one of its corners of the base such that the
two base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the prism when
the axis of the inclined to HP at 400 and to VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

13) A square prism35mm sides of base and 60mm axis length is suspended freely from a corner of its base, Draw the
projections of the prism when the axis to be inclined to VP at 45 0

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

14) A pentagonal prism 25mm sides of base and 50mm axis length is suspended freely from a corner of its base, Draw the
projections of the prism when the axis appears to be inclined to VP at 45 0

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

15) A hexagonal prism 25mm sides of base and 50mm axis length is suspended freely from a corner of its base, Draw the
projections of the prism when the axis appears to be inclined to VP at 45 0

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

 16) A square pyramid 35mm sides of base and 65mm axis length rests on HP on one of its edges of the base which is inclined
to VP at 300, Draw the projections of the pyramid when the axis is inclined to HP at 45 0

16) A square pyramid 35mm sides of base and 65mm axis length rests on HP on one of its edges of the base, Draw the
DEPARTMENT
projections of theOFpyramid
MECHANICAL
when ENGINEERING,
the axis is inclined to HP at 450 and appears to be inclined at 600 to VP BMSCE, BANGALORE-19
17) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its corner of the base such that the base
edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the pyramid when the axis
the pyramid is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

18) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its corners of the base such that the two
base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the pyramid when
the axis of the pyramid is inclined to HP at 400 to VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

19) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its edges of the base, Draw the
projections of pyramid when the axis is inclined to HP at 450 and VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

20) A pentagonal pyramid 25mm sides of base and 60mm axis length rests on HP on one of its edges of the base which is
inclined to VP at 300, Draw the projections of the pyramid when the axis is inclined to HP at 400

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

21) A pentagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its edges of the base, Draw the
projections of the pyramid when the axis is inclined to HP at 450 and VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

22) A pentagonal pyramid 25mm sides of the base and 50mm axis length rests on HP on one of its corners of the base such that
the two base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the pyramid
when the axis of the pyramid is inclined to HP at 400 and appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

23) A pentagonal pyramid 25mm sides of base and50mm axis length rests on HP on one of its corner of the base such that the
two base edges containing the corner on which rests make equal inclinations with HP, Draw the projections of the pyramid when
the axis of the pyramid is inclined to HP at 400 and to VP at300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

24) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its edges od the base which is
inclined to VP at 300, Draw the projections of the pyramid when the axis is inclined to HP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

25) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its edges of the base, Draw the
projections of the pyramid when the axis is inclined to HP at 450 and VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

26) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its corner of the base such that the
two base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the pyramid
when the axis of the pyramid is inclined to HP at 400 and appears to be on inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

27) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its corner of the base such that the
two base edges containing the corner on which it rests make equal inclinations with HP, Draw the projections of the pyramid
when the axis of the pyramid inclined to HP at400 and to VP at 300

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

28) A square pyramid 35mm sides of base and 60mm axis length is suspended freely from a corner of its base, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

29) A pentagonal pyramid 25mm sides of base and 50mm axis length is suspended freely from a corner of its base, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

30) A hexagonal pyramid 25mm sides of base and 50mm axis length is suspended freely from a corner of its base, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

31) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its slant edges, Draw the projections of
the pyramid when the axis appears to be inclined to VP at 450

31a) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its slant edges Draw the projections of
the pyramid when the plane containing this slant edge and the axis is inclined to VP at 45 0 VP
DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19
32) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its edges, Draw the projections of the
pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

33) A square pyramid 35mm sides of base and 60mm axis length rests on HP on one of its slant triangular faces, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

34) A square pyramid 35mm sides of base and 60mm axis length tests on HP on one of its slant triangular faces, Draw the
projections of the pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

35) A pentagonal pyramid 25mm sides of base and 50mm axis length tests on HP on one of its slant edges, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

35) A pentagonal pyramid 25mm sides of base and 50mm axis length tests on HP on one of its slant edges, Draw the
projections of the pyramid when the plane containing this slant edge and the axis is inclined to VP at 45 0 VP

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

36) A pentagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant edges, Draw the projections
of the pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

37) A pentagonal pyramid 25mm sides of base and 50mm axis length rests on HP on of its slant triangular face, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

38) A pentagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant triangular faces, Draw the
projections of the pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

39) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant edges, Draw the projections
of the pyramid when the axis appears to be inclined to VP at 450

39 a) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant edges, Draw the
projections of the pyramid when the plane containing the slant edge and the axis is inclined to VP at 45 0

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

40) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant edges, Draw the projections
of the pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

41) A hexagonal pyramid 2500 sides of base and 50mm axis length rests on HP on one of its slant triangular face, Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

42) A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one of its slant triangular faces, Draw the
projections of the pyramid when the axis is inclined to VP at 450

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

43) A cube of 40mm sides rests on HP on an edge which is inclined to VP at 30 0, Draw the projections when the lateral square
face containing the edge on which it rests makes an angle of 500 to HP

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

44) A tetrahedron of 55mm sides rests on one of its corner such that an slant edge containing that corner is inclined to HP at 500
and VP at 300, Draw its projections

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

45) A cone of 50mm base diameter and 60mm axis length rests on HP on one of its generations, Draw its projections when the
axis is inclined to VP at 300

Axis in Apparent length

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

46) A tetrahedron of sides 40mm is resting on one of its sides on HP, this side is parallel to VP and 40mm away from it, It is tilted
about resting side such that the base containing this edge is inclined at 300 to HP, Draw the projections of the solid

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

47) A hexahedron of 30mm sides is resting on one of its corner on HP such that one of its solid diagonals is perpendicular to VP,
Draw the projections of the solid

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

48) A pentagonal prism of base side 25mm and height 50mm is resting on HP on one of its base corner such that the top most
edge is at a distance of 60mm above HP, Draw its projections, when its top view of the axis is inclined at 45 0 to VP, Also,
determine the inclination of the longer edge of the prism to HP which contains the resting corner

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

49) A square pyramid of base sides 30mm and height 60mm is suspended by a thread tied to one of the corner of its base, It is
then tilted such that the axis makes an angle of 450 with respect to the VP, Considering the apex of the solid to be nearer to the
observer, Draw the projections of the solid

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19

50) A cone of base dia. 40mm and axis length 50mm is resting on HP on a point on the circumference of its base such that its
apex is at 40mm above the HP and top view of the axis is inclined at 600 to VP, Draw the top and front view of solid, Also,
determine the inclinations of the axis when the base is nearer to the observer

DEPARTMENT OF MECHANICAL ENGINEERING, BMSCE, BANGALORE-19