Index Engineering Graphics

Continuous Assessment Sheet

Enrolment No: 0 3 1 9 Term: Winter -20______

Name: .

Sr Start End Marks Sign

No
Sheet List Date
Date

1 Line Lettering & Dimensioning /20

2 Engineering Curve-I (Conics) /20

3 Engineering Curves-II /20

4 Projection of Point & Line /10

5 Projection of Plane /10

6 Orthographic Projections /30

7 Isometric Drawing /30

Total /140

Total mark from 25 /25

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Lab Planning Engineering Graphics

Lab Planning
Staff: - TERM: - Winter-24 Batch: -

Sr
Name of Sheet Plan Start Date Plan End Date Plan Lab/Hrs
No.

1 Line Lettering & Dimensioning 2 Labs/4 Hrs

2 Engineering Curve-I (Conics) 2 Labs/4 Hrs

3 Engineering Curves-II 2 Labs/4 Hrs

4 Projection of Point & Line 1 Labs/2 Hrs

5 Projection of Plane 1 Labs/2 Hrs

6 Orthographic Projections 3 Labs/6 Hrs

7 Isometric Drawing 3 Labs/6 Hrs

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
 110 100 120

45 30

12 24 12

40

30
20
D.E. 1ST SEM ME A1

40

380
Sheet-1 (Line Lettering & Dimensioning) Engineering Graphics

Sheet-1 Line Lettering & Dimensioning

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil all Fulfil 3 Fulfil 2 Fulfil 1 Fulfill Marks
criteria criteria criteria criteria any
criteria

Give proper margin to sheet

Dimensions Proper Line Drawing Layout, Margin & Title

Draw Title block at right

Block

Location
10%

Draw proper Projection angle 2 1.6 1.2 0.8 0.4

Symbol
Detailing of Title block is correct
Planning & Scale

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 4 3.2 2.4 1.6 0.8

Indicate number to each
Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 4 3.2 2.4 1.6 0.8

Draw proper Extension line
Use correct dimensioning
(accuracy)

method
20%

Draw proper dimensions arrow 4 3.2 2.4 1.6 0.8

Cover all required dimensions.
Draw proper dimension line
In drawing sheet
Neatness

No Smudge
10%

No erasures 2 1.6 1.2 0.8 0.4

No Stray Mark
No Wrinkles
0.8
4 3.2 2.4 1.6 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than 6
lab)

Faculty Sign______________ Mark out of 20 20

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-2 (ENGINEERING CURVES-1) Engineering Graphic
Batch-1

1. Construct an ellipse when the distance of the focus from the directrix is equal to 60 mm and eccentricity is
2/3.
2. Draw a Hyperbola passing through a point P (45, 30) .
3. A Batsman hit a six 110 meter long & maximum height of 50 meter. Draw the path of the ball and named
the curve. (Hint Use Scale 1 meter = 1 mm)

Batch-2

1. Distance between directrix to focus and vertex is 60 mm and 30 mm respectively, draw the curve and name it.
2. Draw an Ellipse, its major and minor axis is 120 mm and 90 mm respectively.
3. Draw a Hyperbola passing through a point P (45, 30) by where angle between two axis is 75°.

Batch-3

1. Construct an ellipse having major axis is 120 mm and distance between two focus is 78 mm.
2. Construct an ellipse when the distance of the focus from the directrix is equal to 60 mm and eccentricity is
3/2.
3. Draw parabola having Base and Height of parabola are 120 mm and 70 mm respectively.

દરે ક વિદ્યાર્થીએ દરે ક sheet માટે પોતાની બેચ વિિાય અન્ય બેચ ના assignment ન ું

solution પણ પોતાની સ્કેચ બક માું ફરજીયાત પણે દોરિાના રહેશે.

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-2 (Engineering Curve-I (Conics)) Engineering Graphics

Sheet-2 Engineering Curve-I (Conics)

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil all Fulfil 3 Fulfil 2 Fulfil 1 Fulfill Marks
criteria criteria criteria criteria any
criteria

Give proper margin to sheet

Dimensions Proper Line Drawing Layout, Margin & Title

Draw Title block at right

Block

Location
10%

Draw proper Projection angle 2 1.6 1.2 0.8 0.4

Symbol
Detailing of Title block is correct
Planning & Scale

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 4 3.2 2.4 1.6 0.8

Indicate number to each
Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 4 3.2 2.4 1.6 0.8

Draw proper Extension line
Use correct dimensioning
(accuracy)

method
20%

Draw proper dimensions arrow 4 3.2 2.4 1.6 0.8

Cover all required dimensions.
Draw proper dimension line
In drawing sheet
Neatness

No Smudge
10%

No erasures 2 1.6 1.2 0.8 0.4

No Stray Mark
No Wrinkles
0.8
4 3.2 2.4 1.6 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than 6
lab)

Faculty Sign______________ Mark out of 20 20

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-3 (ENGINEERING CURVES-2) Engineering Graphic
BATCH-1

1. A rolling circle, of 80 mm diameter rolling along a straight line without slipping. Take initial position of the
tracing point at the bottom of the vertical centre line of the rolling circle. Name the curve.
2. Draw an Involute of 50 mm diameter circle.
3. Draw an Archimedean spiral for 1.5 convolution. Smallest and greatest radius is 10 mm and 70 mm
respectively.
BATCH-2

1. Draw involute of square, side = 25mm.

2. Draw epicycloid having directing circle diameter 75 mm and generating circle diameter 25 mm.
3. Draw the Archimedean spiral of 450 degree with the shortest & longest radii are 10 mm & 70 mm
respectively.
BATCH-3

1. Draw an Archimedean spiral for one convolution. Minimum and Maximum radius is 10 mm and 70 mm
respectively.
2. Draw involute of pentagon having all side is 25mm long.
3. Draw hypo cycloid having directing circle diameter 75 mm and generating circle diameter 25 mm.

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-3 (Engineering Curves-II) Engineering Graphics

Sheet-3 Engineering Curves-II

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil all Fulfil 3 Fulfil 2 Fulfil 1 Fulfill Marks
criteria criteria criteria criteria any
criteria

Give proper margin to sheet

Dimensions Proper Line Drawing Layout, Margin & Title

Draw Title block at right

Block

Location
10%

Draw proper Projection angle 2 1.6 1.2 0.8 0.4

Symbol
Detailing of Title block is correct
Planning & Scale

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 4 3.2 2.4 1.6 0.8

Indicate number to each
Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 4 3.2 2.4 1.6 0.8

Draw proper Extension line
Use correct dimensioning
(accuracy)

method
20%

Draw proper dimensions arrow 4 3.2 2.4 1.6 0.8

Cover all required dimensions.
Draw proper dimension line
In drawing sheet
Neatness

No Smudge
10%

No erasures 2 1.6 1.2 0.8 0.4

No Stray Mark
No Wrinkles
0.8
4 3.2 2.4 1.6 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than 6
lab)

Faculty Sign______________ Mark out of 20 20

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-4 (PROJECTION OF POINTS & LINES) Engineering Graphic
1. Draw projections of points on a line XY.
a) Point A is 10 mm above HP and 30 in front of VP.
b) Point B is 15 mm above HP and 10 mm behind VP.
c) Point C is 20 mm below HP and 15 in front of VP.
d) Point D is 15 mm below HP and 20 mm behind VP. Question 1 is common

e) Point E is in H.P and in VP. for all batch

f) Point F is on H.P and 10 mm in front of VP.

g) Point G is in H.P and 20 mm behind VP.
h) Point H is in V.P and 35 mm above HP.
i) Point I is in V.P and 30 mm below HP.

BATCH-1

2. The end P of a line PQ 80 mm long is on HP and VP. The line PQ is inclined at 30° to HP and 45° to VP.
Draw the projection of line PQ and find apparent angles. Assume end Q in first quadrant.
3. Top view and Front view of Line MN, measures 70 mm and 60 mm respectively. The line is 80 mm long.
Point M is on the ground (on horizontal plane) and 10 mm in front of Vertical plane. Draw the projections
of Line MN and Find the inclination with VP & HP.
4. End A of a line AB is 30 mm below HP and 25 mm behind VP. End B is 50 mm below HP and 60 mm
behind VP. The distance between end projectors is 60 mm. draw the projection of line AB and find its true
length and inclinations with HP and VP.
BATCH-2

2. A Line AB is 100 mm long. It makes 30° with HP and 45° with VP. Draw its Projections if one end A is on
both the planes (i.e. on X-Y line).
3. The plan and elevation of a line PQ 100 mm long measures 80 mm and 70 mm respectively. The end P is 10
mm above HP and 15 mm in front of VP. Draw the projections of a line PQ and determine its inclinations
with HP and VP.
4. A distance between the end projectors of a line AB is 65mm. The end A is 15mm above HP and 25mm in
front of VP and the end B is 40mm above HP and 50mm in front of VP. Draw the projections of line AB
and find its true length.
BATCH-3

2. A line AB, 50mm long, has its end A in both the H.P. and the V.P. It is inclined at 30° to the H.P and at 45°
to the V.P. draw its projections.
3. The distance between end projectors of line PQ is 80 mm. One end P is 20 mm above the HP and 30 mm
in front of VP while other end Q is 60 mm above HP and 50 mm in front of VP. Draw the projection of line
PQ. Find its true inclinations.
4. The top view and front view of a line AB, 100mm long, measure 75 mm and 85 mm respectively. End A is
15 mm below HP and 25 mm behind VP. Draw the projection of a line and show its inclinations with HP
and VP.

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-4 (Projection of Point & Line) Engineering Graphics

Sheet-4 Projection of Point & Line

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil Marks
Fulfil 3 Fulfil 2 Fulfil 1 Fulfill
all
criteria criteria criteria any
criteria
criteria
Planning & Scale Title Block

Give proper margin to sheet

Dimensions Proper Line Drawing Layout, Margin &

Draw Title block at right Location

10%

Draw proper Projection angle Symbol 1 0.8 0.6 0.4 0.2

Detailing of Title block is correct

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 2 1.6 1.2 0.8 0.4

Indicate number to each Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 2 1.6 1.2 0.8 0.4

Draw proper Extension line
(accuracy)

Use correct dimensioning method

Draw proper dimensions arrow
20%

Cover all required dimensions. 2 1.6 1.2 0.8 0.4

Draw proper dimension line

In drawing sheet
Neatness

No Smudge
10%

No erasures 1 0.8 0.6 0.4 0.2

No Stray Mark
No Wrinkles
0.4
2 1.6 1.2 0.8 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than 6
lab)

Faculty Sign______________ Mark out of 10 10

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-5 (PROJECTION OF PLANE) Engineering Graphic
BATCH-1

1. A square of 60 mm side is resting on HP on one of its corners which is inclined at 30° with HP and the plane

is inclined at 30° with VP. Draw the projection of plane.

2. A regular hexagonal of 25 mm side is resting on HP on one of its side which is inclined at 45° with HP and

the plane is inclined at 30° with VP. Draw the projection of plane.

3. A Circle of 50 mm diameter is resting on HP which is inclined at 60° with HP and the plane is inclined at

30° with VP. Draw the projection of plane.

BATCH-2

1. A square of 60 mm side is resting on HP on one of its side which is inclined at 30° with HP and the plane is

inclined at 45° with VP. Draw the projection of plane.

2. A regular hexagonal of 25 mm side is resting on HP on one of its corner which is inclined at 45° with HP and

the plane is inclined at 45° with VP. Draw the projection of plane.

3. A Circle of 50 mm diameter is resting on HP which is inclined at 60° with HP and the plane is inclined at

45° with VP. Draw the projection of plane.

BATCH-3

1. A square of 60 mm side is resting on HP on one of its corner which is inclined at 30° with HP and the plane

is inclined at 60° with VP. Draw the projection of plane.

2. A regular hexagonal of 25 mm side is resting on HP on one of its side which is inclined at 45° with HP and

the plane is inclined at 60° with VP. Draw the projection of plane.

3. A Circle of 50 mm diameter is resting on HP which is inclined at 60° with HP and the plane is inclined at

60° with VP. Draw the projection of plane.

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-5 (Projection of Plane) Engineering Graphics

Sheet-5 Projection of Plane

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil Marks
Fulfil 3 Fulfil 2 Fulfil 1 Fulfill
all
criteria criteria criteria any
criteria
criteria

Give proper margin to sheet

Planning & Scale Title Block
Dimensions Proper Line Drawing Layout, Margin &

Draw Title block at right Location

10%

Draw proper Projection angle 1 0.8 0.6 0.4 0.2

Symbol
Detailing of Title block is correct

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 2 1.6 1.2 0.8 0.4

Indicate number to each Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 2 1.6 1.2 0.8 0.4

Draw proper Extension line
(accuracy)

Use correct dimensioning method

Draw proper dimensions arrow
20%

Cover all required dimensions. 2 1.6 1.2 0.8 0.4

Draw proper dimension line

In drawing sheet
Neatness

No Smudge
10%

No erasures 1 0.8 0.6 0.4 0.2

No Stray Mark
No Wrinkles
0.4
2 1.6 1.2 0.8 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than
6 lab)

Faculty Sign______________ Mark out of 10 10

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-6 (ORTHOGRAPHIC PROJECTION) Engineering Graphic

1. A pictorial view of an object is shown in Fig. 1. 2. A Pictorial view of an object is shown in Fig. 2.
Draw to full size of its following view using Third Draw its following views using 1st Angle
angle projection method. Elevation looking from Projection Method. Gives dimension as per
direction “X”. (2) Left hand side view. (3) Top view. aligned method. (1) Elevation from X Direction, (2)
Gives dimension as per Unidirectional method. Plan, (3) Right hand side view

BATCH-1

Figure-1 Figure-2

BATCH-2
Figure-2

Figure-1

BATCH-3

Figure-1

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-6 (Orthographic Projections) Engineering Graphics

Sheet-6 Orthographic Projections

ER No:- __________________________________ Name:- _________________________________________________________________
5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil Marks
Fulfil 3 Fulfil 2 Fulfil 1 Fulfill
all
criteria criteria criteria any
criteria
criteria

Give proper margin to sheet

Planning & Scale Title Block
Dimensions Proper Line Drawing Layout, Margin &

Draw Title block at right Location

10%

Draw proper Projection angle 3 2.4 1.8 1.2 0.6

Symbol
Detailing of Title block is correct

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 6 4.8 3.6 2.4 1.2

Indicate number to each Solution

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 6 4.8 3.6 2.4 1.2

Draw proper Extension line
(accuracy)

Use correct dimensioning method

Draw proper dimensions arrow
20%

Cover all required dimensions. 6 4.8 3.6 2.4 1.2

Draw proper dimension line

In drawing sheet
Neatness

No Smudge
10%

No erasures 3 2.4 1.8 1.2 0.6

No Stray Mark
No Wrinkles
1.2
6 4.8 3.6 2.4 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than
6 lab)

Faculty Sign______________ Mark out of 30 30

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi
Sheet No:-7 (ISOMETRIC PROJECTIONS) Engineering Graphic
Draw an isometric drawing from the views given in Figures as per dimensions.

BATCH-1

BATCH-2

BATCH-3

Department of Mechanical Engineering Prepared by: Muhammed Azahruddin U. Badi

Government Polytechnic, Porbandar
Sheet-7 (Isometric Drawing) Engineering Graphics

Sheet-7 Isometric Drawing

ER No:- __________________________________ Name:- _________________________________________________________________

5 4 3 2 1
Percentage %
Norms

Not
Criteria Fulfil Marks
Fulfil 3 Fulfil 2 Fulfil 1 Fulfill
all
criteria criteria criteria any
criteria
criteria
Planning & Scale Title Block

Give proper margin to sheet

Drawing Layout, Margin &

Draw Title block at right Location

10%

Draw proper Projection angle Symbol 3 2.4 1.8 1.2 0.6

Detailing of Title block is correct

Plan all drawing Efficiently

Drawing Layout is proper
20%

Use suitable Scale 6 4.8 3.6 2.4 1.2

Indicate number to each Solution
Proper Line

Draw proper Visible line

Types

Draw proper Center line

20%

Draw proper Constructions line 6 4.8 3.6 2.4 1.2

Draw proper Extension line
Dimensions
(accuracy)

Use correct dimensioning method

Draw proper dimensions arrow
20%

Cover all required dimensions. 6 4.8 3.6 2.4 1.2

Draw proper dimension line

In drawing sheet
Neatness

No Smudge
10%

No erasures 3 2.4 1.8 1.2 0.6

No Stray Mark
No Wrinkles
1.2
6 4.8 3.6 2.4 (Late
Punctual

(In (Late (Late (Late by

20%

Drawing work is completed

time by 1 by 3 by 5 more
limit) lab) lab) lab) than
6 lab)

Faculty Sign______________ Mark out of 30 30

Govt Poly Porbandar Mech Engg Department Prepaid by :- Muhammed Azharuddin U Badi