Scribd
Upload
265 views2 pages

SABIC® Vestolen P - 9421 - Global - Technical - Data - Sheet

SABIC® VESTOLEN P 9421 is a high molecular weight polypropylene random copolymer designed for high-demand pressure pipes, suitable for both cold and hot water applications. It meets various international standards and has specific mechanical and thermal properties, including a melt flow rate of 0.3 g/10 min at 230°C. Proper storage conditions are crucial to maintain quality, and SABIC provides no warranty for products affected by poor storage practices.

Uploaded by

Usman Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
265 views2 pages

SABIC® Vestolen P - 9421 - Global - Technical - Data - Sheet

SABIC® VESTOLEN P 9421 is a high molecular weight polypropylene random copolymer designed for high-demand pressure pipes, suitable for both cold and hot water applications. It meets various international standards and has specific mechanical and thermal properties, including a melt flow rate of 0.3 g/10 min at 230°C. Proper storage conditions are crucial to maintain quality, and SABIC provides no warranty for products affected by poor storage practices.

Uploaded by

Usman Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SABIC® VESTOLEN P 9421

PP RANDOM COPOLYMER

DESCRIPTION
This random copolymer has a high molecular weight with special designed properties required for high demanding pressure pipes. It is highly heat
stabilized and especially formulated for extraction resistance. This grade with long service life is typically used for the manufacturing of cold and hot
water pipes
and fittings for transport of drinking water. This grade is designed to fulfill the requirements in EN ISO 15874, ISO 3213, and DIN 8078.

TYPICAL PROPERTY VALUES Revision 20211203

PROPERTIES TYPICAL VALUES UNITS TEST METHODS

(1)
POLYMER PROPERTIES
Melt Flow Rate (MFR)
@ 230°C/2.16 kg 0.3 g/10 min ISO 1133

@ 190°C/5 kg 0.5 g/10 min ISO 1133

Density
(1)
@23°C 898 kg/m³ ISO 1183

MECHANICAL PROPERTIES
Tensile test
(2)
strain at yield 13 % ISO 527-2 1A

stress at yield 28 MPa ISO 527-2 1A


(3)
tensile modulus 900 MPa ISO 527-2 1A

Izod impact notched


at 23 °C 16 kJ/m² ISO 180/1A

at 0 °C 4 kJ/m² ISO 180/1A

Charpy impact unnotched

at 23 °C No Break kJ/m² ISO 179

Hardness Shore D 63 - ISO 868

THERMAL PROPERTIES
(4)
Vicat Softening Temperature

at 50 N (VST/B) 68 °C ISO 306

at 10 N (VST/A) 129 °C ISO 306

(1) Typical values: not to be construed as specification limits


(2) Speed of testing: 50 mm/min
(3) Speed of testing: 1 mm/min
(4) Temperature rate: 120°C/h

STORAGE AND HANDLING


Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably
do not exceed 50°C. SABIC would not give warranty to bad storage conditions, which may lead to quality deterioration such as color change, bad smell
and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.

DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
© 2021 CopyrightSUITABILITY
PERFORMANCE, by SABIC. AllOR
rights reserved
FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.
(1) Typical values: not to be construed as specification limits
(2) Speed of testing: 50 mm/min
(3) Speed of testing: 1 mm/min
(4) Temperature rate: 120°C/h

STORAGE AND HANDLING


Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably
do not exceed 50°C. SABIC would not give warranty to bad storage conditions, which may lead to quality deterioration such as color change, bad smell
and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.

DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.

© 2021 Copyright by SABIC. All rights reserved

You might also like