ASTM – NDT STANDARDS

ACOUSTIC EMISSION METHOD

Designation Title
E569 / E569M - 20 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
E650 / E650M - 17 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
E749 / E749M - 17 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
E750 - 15(2020) Standard Practice for Characterizing Acoustic Emission Instrumentation
E751 / E751M - 17 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
E976 - 15 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP)
E1067 / E1067M - 18
Tanks/Vessels
E1106 - 12(2017) Standard Test Method for Primary Calibration of Acoustic Emission Sensors
E1118 / E1118M -
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
16(2020)
E1139 / E1139M - 17 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
E1211 / E1211M - 17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
E1419 / E1419M -
Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
15a(2020)
E1495 / E1495M - 17 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
E1736 - 15 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
E1781 / E1781M - 20 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass
E1888 / E1888M - 17
Reinforced Plastic with Balsa Wood Cores
Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks
E1930 / E1930M - 17
Using Acoustic Emission
 Designation Title
E1932 - 12(2017) Standard Guide for Acoustic Emission Examination of Small Parts
E2075 / E2075M -
Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
15(2020)
E2076 / E2076M - 15 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using
E2191 / E2191M - 16
Acoustic Emission
E2374 - 16 Standard Guide for Acoustic Emission System Performance Verification
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic
E2478 - 11(2016)
(GFRP) Materials Using Acoustic Emission
Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper
E2598 / E2598M - 13
Dryers
Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures
E2661 / E2661M - 20e1
Used in Aerospace Applications
Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using
E2863 - 17
Thermal Pressurization
E2907 / E2907M - Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face
13(2019) Rubbing
E2983 - 14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping
E2984 / E2984M - 14
using Controlled Hydrostatic Pressurization
E3100 - 17 Standard Guide for Acoustic Emission Examination of Concrete Structures
DIGITAL IMAGING AND COMMUNICATION IN NONDESTRUCTIVE EVALUATION (DICONDE)
Designation Title
E1475 - Standard Guide for Data Fields for Computerized Transfer of Digital Radiological
13(2018) Examination Data
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
E2339 - 15
(DICONDE)
E2663 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
14(2018) (DICONDE) for Ultrasonic Test Methods
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
E2699 - 20
(DICONDE) for Digital Radiographic (DR) Test Methods
Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
E2738 - 18
(DICONDE) for Computed Radiography (CR) Test Methods
E2767 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
13(2018) (DICONDE) for X-ray Computed Tomography (CT) Test Methods
E2934 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation
14(2018) (DICONDE) for Eddy Current (EC) Test Methods
Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and
E3147 - 18
Inspection Systems
Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation
E3169 - 18
(DICONDE)
Standard Guide for Building Information Models and Archiving for Digital Imaging and
E3267 - 21
Communication in Nondestructive Evaluation (DICONDE)
EDITORIAL REVIEW
Designation Title
E1316 - 21 Standard Terminology for Nondestructive Examinations

ELECTROMAGNETIC METHOD
Designation Title
Standard Practice for Standardizing Equipment and Electromagnetic Examination of
E215 - 16
Seamless Aluminum-Alloy Tube
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-
E243 - 18
Alloy Tubes
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic
E309 - 16
Saturation
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current
E376 - 19
(Electromagnetic) Testing Methods
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and
E426 - 16
Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of
E566 - 19
Ferrous Metals
E570 - 20 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel
E571 - 19
Alloy Tubular Products
Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic
E690 - 15(2020)
Heat Exchanger Tubes
 Designation Title
E703 - 20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic
E1004 - 17
(Eddy Current) Method
Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic
E1312 - 18
Cylindrical Bar Product Above the Curie Temperature
E1571 -
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
11(2016)e1
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and
E1606 - 20
Aluminum Redraw Rod for Electrical Purposes
E1629 -
Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
12(2020)
E2096 / E2096M Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using
- 16 Remote Field Testing
E2261 / E2261M Standard Practice for Examination of Welds Using the Alternating Current Field
- 17 Measurement Technique
Standard Practice for Characterization of Coatings Using Conformable Eddy Current
E2338 - 17
Sensors without Coating Reference Standards
Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using
E2884 - 17
Conformable Sensor Arrays
E2905 / E2905M Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic
- 20 Methods
E2928 / E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current
- 17 Field Measurement Technique
E3052 - 16 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array
LEAK TESTING METHOD
Designation Title
E432 - 91(2017)e1 Standard Guide for Selection of a Leak Testing Method
E493 / E493M - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the
11(2017) Inside-Out Testing Mode
E498 / E498M - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual
11(2017) Gas Analyzer in the Tracer Probe Mode
E499 / E499M - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the
11(2017) Detector Probe Mode
E515 - 11(2018) Standard Practice for Leaks Using Bubble Emission Techniques
E908 - 98(2018) Standard Practice for Calibrating Gaseous Reference Leaks
E1002 - 11(2018) Standard Practice for Leaks Using Ultrasonics
E1003 - 13(2018) Standard Practice for Hydrostatic Leak Testing
E1066 / E1066M - 19 Standard Practice for Ammonia Colorimetric Leak Testing
E1603 / E1603M - Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak
11(2017) Detector or Residual Gas Analyzer in the Hood Mode
E2024 / E2024M -
Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
11(2019)
E2930 - 13 Standard Practice for Pressure Decay Leak Test Method
LIQUID PENETRANT AND MAGNETIC PARTICLE METHODS
Designation Title
E125 - 63(2018) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E165 / E165M -
Standard Practice for Liquid Penetrant Testing for General Industry
18
E433 - 71(2018) Standard Reference Photographs for Liquid Penetrant Inspection
E709 - 15 Standard Guide for Magnetic Particle Testing
E1135 - 19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-
E1208 - 16
Emulsification Process
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable
E1209 - 18
Process
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-
E1210 - 16
Emulsification Process
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable
E1219 - 16
Process
E1220 - 16 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
E1417 / E1417M -
Standard Practice for Liquid Penetrant Testing
16
E1418 - 16 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
E1444 / E1444M -
Standard Practice for Magnetic Particle Testing
16e1
Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid
E2297 - 15
Penetrant and Magnetic Particle Methods
 Designation Title
Standard Practice for Measurement of Emission Characteristics and Requirements for
E3022 - 18
LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
E3024 / E3024M -
Standard Practice for Magnetic Particle Testing for General Industry
19

NONDESTRUCTIVE TESTING AGENCIES

Designation Title
E543 - 15 Standard Specification for Agencies Performing Nondestructive Testing
Standard Practice for Establishing Quality Management Systems for Nondestructive Testing
E1212 - 17
Agencies
E1359 - 17 Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies

RADIOLOGY (NEUTRON) METHOD

Designation Title
Standard Test Method for Determining Image Quality in Direct Thermal Neutron
E545 - 19
Radiographic Examination
E748 - 19 Standard Guide for Thermal Neutron Radiography of Materials
E803 - 20 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
E2003 - 20 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
E2023 - 19 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
 Designation Title
E2861 - Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron
16(2020) Radiologic Beams
E2971 - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum
16(2020) Neutron Absorbers using Neutron Attenuation Measurements

RADIOLOGY (X AND GAMMA) METHOD

Designation Title
E94 / E94M - 17 Standard Guide for Radiographic Examination Using Industrial Radiographic Film
Standard Practice for Determining Relative Image Quality Response of Industrial
E746 - 18
Radiographic Imaging Systems
Standard Practice for Design, Manufacture and Material Grouping Classification of Wire
E747 - 18
Image Quality Indicators (IQI) Used for Radiology
Standard Practice for Controlling Quality of Radiographic Examination of Electronic
E801 - 16
Devices
E999 - 20 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
E1000 - 16 Standard Guide for Radioscopy
Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-
E1025 - 18
Type Image Quality Indicators (IQI) Used for Radiography
E1030 / E1030M
Standard Practice for Radiographic Examination of Metallic Castings
- 15
Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray
E1032 - 19
Film
E1079 - 16 Standard Practice for Calibration of Transmission Densitometers
 Designation Title
Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-
E1114 - 20
75 Industrial Radiographic Sources
Standard Practice for Radiologic Examination of Semiconductors and Electronic
E1161 - 09(2014)
Components
Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by
E1165 - 20
Pinhole Imaging
E1254 - 13(2018) Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films
E1255 - 16 Standard Practice for Radioscopy
E1390 - 12(2016) Standard Specification for Illuminators Used for Viewing Industrial Radiographs
E1411 - 16 Standard Practice for Qualification of Radioscopic Systems
E1416 - 16a Standard Practice for Radioscopic Examination of Weldments
E1441 - 19 Standard Guide for Computed Tomography (CT)
Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital
E1453 - 20
Radioscopic Data
E1570 - 19 Standard Practice for Fan Beam Computed Tomographic (CT) Examination
E1647 - 16 Standard Practice for Determining Contrast Sensitivity in Radiology
E1672 - 12(2020) Standard Guide for Computed Tomography (CT) System Selection
Standard Test Method for Measurement of Computed Tomography (CT) System
E1695 - 20
Performance
E1734 - 16a Standard Practice for Radioscopic Examination of Castings
Standard Practice for Determining Relative Image Quality Response of Industrial
E1735 - 19
Radiographic Imaging Systems from 4 to 25 MeV
E1742 / E1742M Standard Practice for Radiographic Examination
 Designation Title
- 18
E1814 - 14 Standard Practice for Computed Tomographic (CT) Examination of Castings
E1815 - 18 Standard Test Method for Classification of Film Systems for Industrial Radiography
Standard Practice for Controlling Quality of Radiological Examination by Using
E1817 - 08(2014)
Representative Quality Indicators (RQIs)
E1931 - 16 Standard Guide for Non-computed X-Ray Compton Scatter Tomography
E1935 - 97(2019) Standard Test Method for Calibrating and Measuring CT Density
Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution
E2002 - 15
in Radiography and Radioscopy
E2007 - 10(2016) Standard Guide for Computed Radiography
Standard Practice for Radiographic Examination Using Computed Radiography
E2033 - 17
(Photostimulable Luminescence Method)
Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials
E2104 - 15
and Components
E2445 / E2445M Standard Practice for Performance Evaluation and Long-Term Stability of Computed
- 20 Radiography Systems
E2446 - 16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
E2597 / E2597M
Standard Practice for Manufacturing Characterization of Digital Detector Arrays
- 14
Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich
E2662 - 15
Core Materials Used in Aerospace Applications
E2698 - 18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays
E2736 - 17 Standard Guide for Digital Detector Array Radiography
 Designation Title
Standard Practice for Digital Detector Array Performance Evaluation and Long-Term
E2737 - 10(2018)
Stability
Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro
E2903 - 18
Focus X-ray Tubes

REFERENCE RADIOLOGICAL IMAGES

Designation Title
E155 - 20 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel
E186 - 20
Castings
E192 - 20 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
E242 - Standard Reference Radiographs for Appearances of Radiographic Images as Certain
15(2020) Parameters are Changed
Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy
E272 - 19
Castings
E280 - Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel
15(2019)e1 Castings
E310 -
Standard Reference Radiographs for Tin Bronze Castings
15(2019)e1
E390 - 20 Standard Reference Radiographs for Steel Fusion Welds
E431 -
Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
96(2016)
E446 - 20 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
 Designation Title
E505 - 15 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film
E592 - 20 Radiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to
152 mm) Thick with Cobalt-60
E689 - 20 Standard Reference Radiographs for Ductile Iron Castings
Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in
E802 - 19
Thickness
E1320 - 20 Standard Reference Radiographs for Titanium Castings
E1648 - 20 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization
E1936 - 20
Systems
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to
E1955 - 20
Graded ASTM Reference Radiographs
E2422 - 17 Standard Digital Reference Images for Inspection of Aluminum Castings
Standard Digital Reference Images for Investment Steel Castings for Aerospace
E2660 - 17
Applications
E2669 - 16e1 Standard Digital Reference Images for Titanium Castings
E2868 - 17 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
E2869 - 17 Standard Digital Reference Images for Magnesium Castings
Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die
E2973 - 15
Castings
Standard Digital Reference Images for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel
E3030 - 19
Castings
E3168 - 20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
SPECIALIZED NDT METHODS
Designation Title
E977 - 05(2019) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
E1213 - Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging
14(2018) Systems
E1311 - Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging
14(2018) Systems
E1476 -
Standard Guide for Metals Identification, Grade Verification, and Sorting
04(2014)
E1543 - Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging
14(2018) Systems
E1862 - Standard Practice for Measuring and Compensating for Reflected Temperature Using
14(2018) Infrared Imaging Radiometers
E1897 - Standard Practice for Measuring and Compensating for Transmittance of an Attenuating
14(2018) Medium Using Infrared Imaging Radiometers
E1933 - Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging
14(2018) Radiometers
E1934 - Standard Guide for Examining Electrical and Mechanical Equipment with Infrared
99a(2018) Thermography
Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in
E2533 - 21
Aerospace Applications
E2581 - Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core
14(2019) Materials in Aerospace Applications
Standard Practice for Infrared Flash Thermography of Composite Panels and Repair
E2582 - 21
Patches Used in Aerospace Applications
 Designation Title
Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using
E2775 - 16
Piezoelectric Effect Transduction
E2862 - 18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
E2906 / E2906M
Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
- 18
Standard Practice for Guided Wave Testing of Above Ground Steel Piping with
E2929 - 18
Magnetostrictive Transduction
Standard Guide for Nondestructive Examination of Composite Overwraps in Filament
E2981 - 21
Wound Pressure Vessels Used in Aerospace Applications
Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in
E2982 - 21
Filament-Wound Pressure Vessels Used in Aerospace Applications
E3023 - 21 Standard Practice for Probability of Detection Analysis for â Versus a Data
E3045 - 16 Standard Practice for Crack Detection Using Vibroacoustic Thermography
E3101 - 18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in
E3102 - 18
Piping Application
Standard Guide for Nondestructive Examination of Metal Additively Manufactured
E3166 - 20e1
Aerospace Parts After Build
ULTRASONIC METHOD
Designation Title
B594 - 19e1 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with
C1331 - 18
Broadband Pulse-Echo Cross-Correlation Method
Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced
C1332 - 18
Ceramics by Pulse-Echo Contact Technique
E114 - 20 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic
E127 - 20
Standard Reference Blocks
E164 - 19 Standard Practice for Contact Ultrasonic Testing of Weldments
E213 - 20 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E273 - 20 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo
E317 - 16 Testing Instruments and Systems without the Use of Electronic Measurement
Instruments
Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-
E494 - 20
Echo Method
E587 - 15(2020) Standard Practice for Ultrasonic Angle-Beam Contact Testing
E664 / E664M - Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal
15(2020)e1 Ultrasonic Waves by Immersion Method
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact
E797 / E797M - 15
Method
E1001 - 16 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed
 Designation Title
Pulse-Echo Ultrasonic Method Using Longitudinal Waves
E1065 / E1065M -
Standard Practice for Evaluating Characteristics of Ultrasonic Search Units
20
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing
E1324 - 16
Instruments
E1774 - 17 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic
E1816 - 18
Transducer (EMAT) Methods
Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo
E1901 - 18
Straight-Beam Ultrasonic Methods
Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal
E1961 - 16
Discrimination with Focused Search Units
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic
E1962 - 19
Transducer (EMAT) Techniques
Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both
E2001 - 18
Metallic and Non-metallic Parts
E2192 - 13(2018) Standard Guide for Planar Flaw Height Sizing by Ultrasonics
E2223 - Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels
13(2018)e1 Using Angle Beam Ultrasonics
E2373 / E2373M -
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
19
E2375 - 16 Standard Practice for Ultrasonic Testing of Wrought Products
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls
E2479 - 16
Using Lateral Longitudinal (LCR) Waves
 Designation Title
Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic
E2491 - 13(2018)
Testing Instruments and Systems
Standard Practice for Targeted Defect Detection Using Process Compensated
E2534 - 20
Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core
E2580 - 17
Materials Used in Aerospace Applications
E2700 - 20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
E2904 - 17 Standard Practice for Characterization and Verification of Phased Array Probes
E2985 / E2985M - Standard Practice for Determination of Metal Purity Based on Elastic Constant
14(2019) Measurements Derived from Resonant Ultrasound Spectroscopy
E3044 / E3044M -
Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
16e1
Standard Practice for Outlier Screening Using Process Compensated Resonance
E3081 - 16
Testing via Swept Sine Input for Metallic and Non-Metallic Parts
E3167 / E3167M - Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene
18 Electrofusion Joints
E3170 / E3170M - Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion
18 Joints
Standard Practice for Part-to-Itself Examination Using Process Compensated
E3213 - 19
Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts