Scribd
Upload
34 views

Instructions

The document outlines a procedure for establishing a secure connection to a specified server for the transmission of funds. It details the steps required, including providing screenshots of successful connections and confirming fund transmissions before final codes are exchanged. The process concludes with a test transaction of 100 USDT/TRC 20, followed by the full balance transfer upon confirmation of receipt.

Uploaded by

Beniamin Kohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Instructions

The document outlines a procedure for establishing a secure connection to a specified server for the transmission of funds. It details the steps required, including providing screenshots of successful connections and confirming fund transmissions before final codes are exchanged. The process concludes with a test transaction of 100 USDT/TRC 20, followed by the full balance transfer upon confirmation of receipt.

Uploaded by

Beniamin Kohan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The procedure is as follow:

SWIFT delivered at: 162.254.35.81


Server Transaction IP: 162.254.35.81
Server IP: 162.254.35.81
Server ID: 5622749.
Farm 26.

Step 1:
Establish a secure connection request to the server above and provide FULL screenshot of
successful connection transmission along with connection code so I can accept.

Step 2:
Once I get both above ,I will check , establish & accept the secure connection and send my full
screen of established secured connection .

Step :3
Soon after the funds are transmitted on the IP, send the slip confirming successful transmission
holding back all the final codes .
Important Note : we will only need the final codes once we see funds on our server .

Step 4:
Once the funds reflects on server we will give our full screen shot , at this point we will need all
the codes so we could start operation which will finish within 16 hours after getting the final
codes that including the payout .

After we finish we will ask for wallet details & transmit 100 USDT/TRC 20 as a test and give the
screen shot , and once you confirm receipt into your wallet the same minute I will transmit the
full balance crypto.

M0 funds or M1 range is the same regardless .

Most important thing on your server is to have IBAN unlock and lazer allowed. I can accept
connection requests from bank servers, private servers, global server but never from virtual
hosts.

You might also like