INSTRUCTION MANUAL

Automatic Wrist
Blood Pressure Monitor

 !"#$%&'

Model

===
IW1

ME
M

ST
A
ST RT
OP

SE
T

En_TC-Cover[IW1] Page 1 10/1/04, 4:28 PM Adobe PageMaker 6.5C/PPC

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 1

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Notes on Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Suggestions for Measuring Blood Pressure . . . . . . . . . . . .5
Initial Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Battery Installation/Replacement . . . . . . . . . . . . . . . . .7
How to Set the Date and Time . . . . . . . . . . . . . . . . . . .8
Correct Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
How to Apply the Wrist Cuff . . . . . . . . . . . . . . . . . . .10
How to Take a Reading . . . . . . . . . . . . . . . . . . . . . .11
How to Use the Memory Function . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . .18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

1
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 2

Introduction
Thank you for purchasing the Omron IW1 Automatic Wrist Blood Pressure
Monitor.

This remarkable, compact and easy to use instrument is ideal for people who
frequently monitor their own blood pressure. The small, pre-formed wrist cuff
is very convenient and easy to apply.

With the push of a button the Omron Wrist Blood Pressure Monitor measures
your blood pressure and pulse and displays the reading on a clear digital
panel. Perfect for quick, easy readings at home, at work, and while traveling.
It also stores up to 90 sets of measurements in memory and displays an
average reading based on the three most recent measurements.

The OMRON Wrist Monitor uses the oscillometric method of blood pressure
measurement. This means the monitor detects the pulse wave vibrations in the
artery of your wrist and converts the oscillations into a digital reading.

Clinical research has proven a direct relationship between blood pressure in

the wrist and blood pressure in the arm. Changes in wrist blood pressure
reflect changes in arm blood pressure because the arteries in the wrist and the
arm are connected.

Frequently measuring the blood pressure in your wrist will provide you and
your doctor with an accurate indication of changes in your true blood
pressure.

Please read this instruction manual thoroughly before using

the unit. For specific information about your own blood
pressure, consult your doctor.

2
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 3

Notes on Safety
The OMRON IW1 is not suitable for measuring the frequency of cardiac
pacemakers.
You should never change the dosage of medication prescribed by your doctor.
People with poor peripheral circulation may find that results for measurements
taken at the wrist vary from those taken on the upper arm.
Use the OMRON IW1 only for yourself.

Caution
Self-diagnosis of measured results and treatment are dangerous. Please follow
the instructions of your doctor.

Do not use the unit on infants or persons who cannot express their consent.

Do not use the unit for any purpose other than measuring blood pressure.

Do not use a cellular phone, or other devices that emit electromagnetic fields,
near the unit. This may result in incorrect operation of the unit.

Battery liquid may leak and damage the main unit. Please observe the
following points.
• When you are not going to use the unit for a long period of time
(approximately three months or more), take out the batteries.
• Replace old batteries with new ones immediately.
• Do not use old and new batteries together.
• Do not insert the batteries with their polarities incorrectly aligned.

3
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 4

Know Your Unit

Main Unit

Wrist Cuff
Display

STA
ME
M
MEM Button
STO RT
P

START/STOP Button
SE
T

Battery Compartment SET Button

Display
Average Value Display Memory Value Symbol
(Displayed when viewing (Displayed when viewing
the average value for last values stored in memory.)
three measurements.)
Systolic Blood Pressure Heartbeat Symbol
Irregular Heartbeat
Diastolic Blood Pressure
Symbol
Battery Low Symbol Date/Time Display
Cuff Deflation Symbol
Pulse Display

Accessories

Two AAA Alkaline Batteries Storage Case

4
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 5

Suggestions for Measuring Blood Pressure

Avoid eating, drinking, smoking, or exercising for at least 30 minutes before
taking a measurement. You should also try to measure your blood pressure at
the same time each day.
Measurement should be taken in a quiet place and you should be in a
relaxed, seated position.

1. Align the wrist cuff with the level of your heart

and gently support your left arm with your right
hand. Do not place your right hand on the cuff
itself.

2. Press the START/STOP button.

Remain still and do not talk during the

measurement.

Notes:
* Always wait at least 2-3 minutes before taking another blood pressure
measurement.
You may require more rest time between readings depending on your
individual physiological characteristics.
* Only use the IW1 to measure your own blood pressure since the results
of measurements are stored in memory.
* Always wrap the wrist cuff around your wrist before starting to take a
measurement.
* Do not measure your blood pressure while you are in a vehicle.
* Always measure your blood pressure on the same wrist.

5
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 6

Initial Set-Up
Battery Installation/Replacement

1. Remove the battery cover by pulling it off in the

direction of the arrow.

ME
M
ST OP
AR
ST

T
SE
T
2. Insert two AAA batteries in the battery
compartment, so that their polarities match the

ME
M
ST OP
AR
ST

T
SE
T
polarities of the battery compartment as
indicated.

3. Replace the battery cover.

ME
M
Note:

ST OP
AR
ST

T
SE
T
* Make sure that the battery cover is securely in
position.

Caution:
* Use two identical 1.5V AAA batteries.

Note:
* The measurement values continue to be stored in memory even after the
batteries are replaced.

6 Battery Installation/Replacement
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 7

Initial Set-Up

Battery Life & Replacement

• High performance alkaline dry cell batteries (2 “AAA”) should be good for
approximately 300 readings.
• Battery life varies with ambient temperature, Battery life is shorter under cold
conditions such as during the winter.
• The dry cell batteries provided are for monitoring and may run down before
300 readings.
• If the battery replacement symbol blinks while measuring or if pressure is not
applied when the START/STOP button is pressed, replace both batteries (use
the same type).
• Holding the START/STOP button down may shorten battery life. To avoid
pressure on the button when transporting or storing, use the case provided.
• Dispose of batteries according to applicable local regulations.

Battery Installation/Replacement 7
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 8

Initial Set-Up

How to Set the Date and Time

Your blood pressure monitor automatically stores up to 90 measurement values
in its memory and calculates an average value based on the last three
measurements. If the correct date and time has not been set, the measurement
values will not be stored in memory. To make use of the memory and average
value function:
• Set the monitor to the correct date and time before taking a measurement
for the first time.
• If the batteries have been removed for a long period of time, the date and
time setting will need to be reset.

1. When the batteries are installed for the first time,

the year digits (2004) will flash on the display
when you turn on the monitor.

Note:
* The range for the year setting is 2004 to 2030.
If the year reaches 2030, it will return to 2004.
* If you need to reset the date and time, press the SET button until the
setting you want to adjust appears on the display, then press the MEM
button to change the setting.

2. Press the MEM button to advance the digits one

at a time.

Note:
* If you hold down the MEM button, the digits
will advance rapidly.

3. Press the SET button to confirm the setting when

the desired number appears on the display.

The year setting is set and the month digits will

flash.
8 How to Set the Date and Time
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 9

Initial Set-Up
4. Repeat steps 2 and 3 to set the month and date (day).

5. Repeat steps 2 and 3 to set the hour and minutes for the time.

Note:
* The monitor will automatically turn itself off after you press the SET
button to confirm the minute setting.

How to Set the Date and Time 9

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 10

Correct Usage
How to Apply the Wrist Cuff

1. Roll up your sleeve so that the monitor is in direct

contact with skin. Do not apply over clothing.

Make sure that your sleeve is not too tight and

does not constrict the flow of blood in your arm.

2. Place the wrist cuff over your left wrist with your left thumb facing upward.

3. Hold the bottom part of the wrist cuff and wrap it around the wrist while
pulling so that it fits comfortably.

MEM

MEM
STA
RT
STO
P
STA
RT
SET STO
P

SET

Make sure that the wrist cuff does not cover the protruding part of the
wrist bone (ulna) on the outside of the wrist.
Unless the wrist cuff is wrapped securely around the wrist, it may not be
possible to take correct measurements.

4. The remaining part of the wrist cuff can be

conveniently folded back out of the way. MEM

START
STOP

SET

Taking measurements on the right wrist

Measurements can also be made on the right wrist.
Fit the monitor on the right wrist as shown. SE
T
STA
ME

STO RT
P
M

10 How to Apply the Wrist Cuff

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 11

Correct Usage

How to Take a Reading

1. Sit comfortably, hold your arm across your chest

and relax.

2. Press the START/STOP button.

3. All display symbols appear briefly on the display and the wrist cuff starts
to inflate.

Notes:
* The current time is displayed and the heartbeat symbol starts to flash
while the cuff is inflating.
* Sit still and do not talk or move until the measurement is completed.
* Keep the monitor at heart level until the measurement is completed.
* To stop measurement, press the START/STOP button at any time during
measurement.

.4. After the monitor has detected your

blood pressure and pulse rate, the
cuff automatically deflates and your
blood pressure and pulse rate are
displayed.

Note: Alternating display

* The time and date of the measurement are displayed alternately.

How to Take a Reading 11

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 12

Correct Usage
5. Press the START/STOP button to turn off the
monitor.

If you forget to turn off the monitor, it will shut

itself off automatically after two minutes.

Important:
* Your blood pressure monitor includes an irregular heartbeat feature.
Irregular heartbeats can influence the results of the measurement. The
irregular heartbeat function automatically determines if the
measurement is usable or needs to be repeated. If the measurement
results are affected by irregular heartbeats but the result is valid, the
result is shown together with the irregular heartbeat symbol ( ). If
the irregular heartbeats cause the measurement to be invalid, no result
is shown. If the irregular heartbeat symbol ( ) is shown after you
have taken a measurement, repeat the measurement. If the irregular
heartbeat symbol ( ) is shown frequently, please notify your doctor.

Note:
* Do not use this monitor to measure blood pressure for more than one
person since the measurement values are automatically stored in
memory and an average value based on the last three measurements is
calculated.

12 How to Take a Reading

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 13

Correct Usage

What is Irregular Heartbeat?

An irregular heartbeat is a heartbeat Normal Heartbeat
rhythm that varies by more or less
Pulse
than 25% from the average
heartbeat rhythm detected while the Blood pressure
unit is measuring the systolic and Irregular Heartbeat
diastolic blood pressure. Short Long
If such an irregular rhythm is Pulse
detected more than twice during Blood pressure
measurement, the irregular
heartbeat symbol ( ) appears on
the display when the measurement results are displayed.

What is Arrhythmia?
A heartbeat is stimulated by electrical signals that cause the heart to contract.
Arrhythmia is a condition where the heartbeat rhythm is abnormal due to
flaws in the bio-electrical system that drives the heartbeat. Typical symptoms
are skipped heartbeats, premature contraction, an abnormally rapid
(tachycardia) or slow (bradycardia) pulse. This can be caused by heart
disease, aging, physical predisposition, stress, lack of sleep, fatigue etc.
Arrhythmia can only be diagnosed by a doctor through a special
examination.
Whether the appearance of the irregular heartbeat symbol ( ) in the results
indicates arrhythmia or not can only be determined by an examination and
diagnosis by your doctor.
If the irregular heartbeat symbol ( ) is shown frequently, please notify your
doctor. Conducting self-diagnosis and treatment based on measurement results
is dangerous. Be sure to follow the instructions of your doctor.

How to Take a Reading 13

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 14

Correct Usage

How to Use the Memory Function

This monitor has a memory capable of storing 90 sets of readings. Every time
you complete the measurement, the monitor automatically stores blood
pressure and pulse rate. The monitor also displays an average reading based
on the measurements from the three most recent readings.

Notes:
* To ensure that the measurement results are recorded correctly, make sure
that the date and time are set correctly before taking a measurement.
* When 90 sets of readings are stored in memory, the oldest set will be
deleted to store a new set.
* The date and time of stored readings will be alternately displayed.

To View the Average Value

Press the MEM button.

To View Previous Readings Stored in Memory

1. Press the MEM button, while the average reading is displayed, to view
readings stored in memory from the most recent to the oldest.

14 How to Use the Memory Function

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 15

Correct Usage
2. Press the MEM button repeatedly to cycle through the readings.

3. Press the SET button, while the average reading is displayed, to view
readings from the earliest stored in memory.

4. Press the SET button repeatedly to cycle through the readings.

To Delete All Values in Memory

You cannot delete the stored readings partially, all the readings in the monitor
will be deleted.
To delete stored readings, press the MEM button and the START/STOP button
simultaneously, all the readings will be deleted.

How to Use the Memory Function 15

EN-01-19[IW1]-1 10/5/04 9:14 AM Page 16

Troubleshooting
Symptom Cause Correction
Replace with new
Batteries are flat.
No display appears batteries.
when the START/STOP
button is pressed. Insert the batteries with
Batteries were inserted
the correct [+] [-]
incorrectly.
polarity.

Are you holding the Measure while in the

wrist cuff at heart level? correct posture.

Is the cuff wrapped

Cannot measure or Wrap the cuff correctly.
snugly around the wrist?
readings are too high.
Are your arms and Relax and try taking the
shoulders tense? measurement again.

Have you been talking

Keep still and do not talk
or moving your hands
during measurement.
during measurement?
There is no pressure but
a reading still appears You are in memory Turn power off once and
when the START/STOP mode. restart measurement.
button is pressed.
The blood pressure is Blood pressure readings constantly vary with time
different each time. The of measurement and psychological condition. Take
reading is extremely deep breaths to relax before taking a
low (or high). measurement.

16
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 17

Troubleshooting

Error Symbol Cause Correction

Cuff over inflated.

Press the START/STOP
button once to turn off
After several seconds the power. Sit still restart
measurement and keep
still and do not talk
Movement during during measurement.
measurement

After several seconds

Carefully read and

The wrist cuff is not repeat the steps listed
fastened securely. under “How to Apply the
Wrist Cuff”.

Contact the store where

An E mark is you purchased this unit,
displayed. or the nearest OMRON
dealer.

Replace the batteries

The battery power is
with two new “AAA”
low.
batteries.

17
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 18

Care and Maintenance

To protect your monitor from damage, please avoid the following:

•Subjecting your monitor to extreme temperatures,

humidity, or direct sunlight.

•Washing the cuff or exposing the cuff or monitor to

water.

•Disassembling the monitor.

•Subjecting the monitor to strong shocks or vibrations. Do not drop the

monitor.

•Cleaning the monitor with volatile liquids. The MONITOR SHOULD BE

CLEANED WITH A SOFT, DRY CLOTH.

18
EN-01-19[IW1]-1 10/5/04 9:14 AM Page 19

Specifications
Name : OMRON Automatic Wrist Blood Pressure Monitor
Model : IW1
Display : Digital Display
Measurement : Oscillometric method
Measurement Range : Pressure: 0 to 299 mmHg
Memory : 90 measurements with date and time
Pulse : 40 to 180 beats/min
Accuracy : Pressure; Within ±3 mmHg
Pulse rate; Within ±5% of reading
Inflation : Automatic inflation by pump
Deflation : Automatic rapid deflation
Pressure Detection : Electrostatic capacity semiconductor pressure sensor
Power supply : Two AAA batteries (LR03)
Battery Life : Approximately 300 measurements when using
alkaline batteries at room temperature of 22˚C,
three times a day and inflating to 170 mmHg
Operating Temperature
and Humidity : 10°C to 40°C, 30 to 85% RH
Storage Temperature
and Humidity : -20°C to 60°C, 10 to 95% RH
Weight of Main Unit : Approximately 110 g (not including batteries)
External Dimensions : 70 mm (w) x 54 mm (h) x 37 mm (d)
(not including the wrist cuff)
Measurable
circumference of wrist : Approximately 135 mm to 215 mm
Electric Shock
Protection : Internal power supply appliance type B
Accessories : Storage case, two AAA alkaline batteries, Instruction
manual

Note:
* These specifications, to improve performance, are subject to change
without notice.

19