Scribd
Upload
133 views

UGAR Quick Installation Guide_UX1

This document provides instructions for connecting and mounting the UX1/UX1 Ultra head unit, including detailed pin functions and color codes for wiring. It also covers the setup for Carplay and Android Auto, reverse camera wiring, and configuring steering wheel controls. Additionally, it includes warnings about incorrect connections and rooting the unit, which voids the warranty.

Uploaded by

h8l8n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views

UGAR Quick Installation Guide_UX1

This document provides instructions for connecting and mounting the UX1/UX1 Ultra head unit, including detailed pin functions and color codes for wiring. It also covers the setup for Carplay and Android Auto, reverse camera wiring, and configuring steering wheel controls. Additionally, it includes warnings about incorrect connections and rooting the unit, which voids the warranty.

Uploaded by

h8l8n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

UX SERIES

UX1/UX1 Ultra
HOW TO
CONNECT?

The image of this harness


is for reference only. The
harness you received can

CA
match your vehicle and

NB
the connection method is

US
the same.

USB 1

AUDIO RR OUT

USB 2
AUDIO RL OUT
USB 3
HOW TO
CONNECT?
WARNING
The functionof every pins has been shown below. Please match based on the
pin functions and the colors are for reference only. Since the connections of
every cars may varies, please check the car manufacturer’s manual regarding
the corresponding pints to be connected to your car. Please pay attention to
the position of those pins and be very careful of the +/- pins. Incorrect
connection may cause serious damage, please make sure you understand the
connection before connection. Please consult professional if you are unsure
about the connections.

PIN COLOR FUNCTIONS PIN COLOR FUNCTIONS


1 BLACK GROUND 9 YELLOW BATT/B+ VCC
2 RED ACC 10 ORANGE ILL
3 BROWN REVERSE 11 ORANGE/WHITE KEY1
4 ORANGE/BLACK KEY2 12 BLUE ANT VCC/AMP CON
5 GREY FR+ SPEAKER 13 GREEN/BLACK RL- SPEAKER
6 GREY/BLACK FR- SPEAKER 14 GREEN RL+ SPEAKER
7 WHITE FL+ SPEAKER 15 PURPLE/BLACK RR- SPEAKER
8 WHITE/BLACK FL- SPEAKER 16 PURPLE RR+ SPEAKER

AUX CABLE

4G SIM
CARD SLOT

AUDIO FL OUT

AUDIO FR OUT

MICROPHONE
AUDIO IN L
FAN POWER SUPPLY
AUDIO IN R
SUBWOOFER
AMPLIFIER
CONTROL RCA VIDEO IN
HOW TO
MOUNT?

Please use the four screws provided to secure the head unit to the fascia kit
at the positions with the red circles.
NOTE: This is only an installation example and represent the fascia kit you
received.

4G CONNECTION
The 4G module can only support the following network.
NETWORK BAND SUPPORT
GSM GSM850 EGSM900 DCS1800 PCS1900
WCDMA BAND1 BAND2 BAND5 BAND8
TD-SCDMA BAND34 BAND3
TDD-LTE BAND34 BAND38 BAND39 BAND40 BAND41N
FDD-LTE BAND1 BAND2 BAND3 BAND5 BAND7 BAND8
E BAN20 BAND28A

CARPLAY
& ANDROID AUTO
For the use of Carplay and Android Auto, please use genuine USB cable
provided by the manufacturer of the phone. Carplay can also perform
WIRELESS connection with the head unit. Simply click the CARLINK icon,
the connection will perform automatically.
HOW TO
WIRE THE REVERSE CAMERA?
TO HEAD UNIT

REVERSE CAM-IN
CABLE

CONNECT REVERSE
BACK OR CAM IN
REVERSE WIRE
OF ISO HARNESS
BRAKE

CONNECT CONNECT
TO REVESE TO REVESE
LAMP 12V- LAMP 12V+

When you shift to reverse gear, the backlight wire will release 12V power to the
head unit and trigger the head unit to change from NORMAL mode to
CAMERA IN mode, the video signal from the camera will be shown on the
screen. Please connect the BRAKE wire only if you want the screen to turn off
automatically while driving.

HOW TO CONFIG
STEERING WHEEL CONTROLS?
After finished the harness
connections, please go to the
steering wheel control interface
to configure each buttons.
Simply hold the function that you
want to configure on the screen,
the icon will flash, then press the
relative button on your steering
wheel control.

RESET
In case you experience any issue with the head unit
and you want to reset, please follow this path. App
-> Settings -> User -> 3368 -> Backup and Reset
-> 3368 -> Confirm -> Erase all data (factory reset)
ACCESSORIES
(OPTIONS)

Rooting may cause damage to the unit (e.g. blank screen, no sound) and the unit
cannot be recovered. Rooting will void the warranty to this unit. Buyers should
solely be responsible for all the consequences.
HEAD UNIT EXTERNAL MICROPHONE

AUX REVERSE CAM-IN


+ CANBUS CABLE CABLE AUX CABLE

USB 1, 2 & 3 GPS 4G


ANTENNA ANTENNA

You might also like