Scribd
Upload
49 views

CEC338 EMI EMC Syllabus

The document outlines a course on EMI/EMC pre-compliance testing, covering fundamental concepts of electromagnetic interference, measurement devices, coupling principles, and design issues. It includes five units focused on the nature of electromagnetic compatibility, types of EMI coupling, measurement devices, receivers and analyzers, and pre-compliance testing strategies. Textbooks and references for further reading are also provided.

Uploaded by

Lokesh Gopinath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

CEC338 EMI EMC Syllabus

The document outlines a course on EMI/EMC pre-compliance testing, covering fundamental concepts of electromagnetic interference, measurement devices, coupling principles, and design issues. It includes five units focused on the nature of electromagnetic compatibility, types of EMI coupling, measurement devices, receivers and analyzers, and pre-compliance testing strategies. Textbooks and references for further reading are also provided.

Uploaded by

Lokesh Gopinath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CEC338 EMI / EMC PRE COMPLIANCE TESTING LTPC

202 3
COURSE OBJECTIVES:
● To introduce the basic concepts of Electromagnetic Interference
● To teach the importance of measurement device for EMI.
● To explain the EMI coupling & control principles
● To understand receivers & Analyzer functionalities
● To impart knowledge on design issues in EMI/EMC

UNIT I NATURE AND ORIGINS OF ELECTROMAGNETIC COMPATIBILITY 6


Introduction – Visualisiong the EMI problem-Source of EMI, EMI coupling to victim equipment,
Intersystem and Intrasystem EMI, EMC standards and specifications

UNIT II TYPES of EMI COUPLING 6


Conducted, radiated and transient coupling; Common ground impedance coupling; Common
mode and ground loop coupling; Differential mode coupling, Near field cable to cable
coupling; Field to cable coupling, Power mains and Power supply coupling; Transient EMI

UNIT III MEASUREMENT DEVICES FOR EMI 6


Introduction – Measurement by direct connection, Inductively coupled devices, EMC
antennas – Basic antenna parameters, Antennas for radiated emission testing, Wideband
antennas - Magnetic field antennas, Type of antennas used in susceptibility testing

UNIT IV RECEIVERS, ANALYSERS AND MEASUREMENT EQUIPMENT 6


EMI receiver, Spectrum Analyzers, RF power meter Frequency meters. Standards requiring
immunity tests, Automatic EMC tests, Electromagnetic transient testing, Transient types,
Continuous and transient signal, ESD-electrostatic discharge

UNIT V PRE-COMPLIANCE TESTING TO AVOID EMC PROBLEMS 6


Need for Pre-Compliance Testing; Intersystem and Intrasystem EMC - Developing an
approach to EMC design - Process flow chart, - EMC strategy – Self certification; Solutions
to avoid EMC: ESD Shielding, EMI Filters; Grounding; Bonding, Isolation transformer,
Transient suppressors; EMI
Suppression Cables.
30 PERIODS

TEXTBOOKS
1. David Morgan, "A Handbook for EMC Testing and Measurement", IET Electrical
Measurement, 2012
2. Tim Williams, "EMC for Product Designers", 5th Edition, Newnes Elsevier, 2017

REFERENCES
1. V.P.Kodali, “Engineering EMC Principles, Measurements and Technologies”, IEEE
Press, Newyork, 1996
2. Paul, C.R., “Introduction to Electromagnetic Compatibility”, 2nd ed., Wiley (2010)
3. David K. Cheng, “Field and Wave Electromagnetics”, 2nd ed. Pearson Education,
2009

You might also like