GENERAL NOTES

DESIGN MATERIAL STRESSES (L2)

LONG SPAN
(L1) (L3)

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE SPECIFIED. ADDITIONAL NOTES: L2/4 L1/4 L1/4 L3/4

1. ACI SECTION STATES THAT:

2. ALL BAR DIAMETERS AND SPACINGS ARE IN MILLIMETERS UNLESS DEVELOPMENT LENGTH OF INDIVIDUAL BARS WITHIN A BINDLE IN TENSION OR COMPRESSION

L4/4
OTHERWISE NOTED.
SHALL BE THAT FOR THE INDIVIDUAL BAR. INCREASED 20 PERCENT FOR THREE BAR BUNDLE

SHORT SPAN
3. ALL FOUNDATIONS & SLABS ON FILL SHALL REST ON 2" THICK G-1
AND 33 PERCENT FOR FOUR BUNDLE

(L4)

BO. BARS ALONG LONG SPAN

TOP BARS ALONG SHORT SPAN
GRAVEL BEDDING.
2. FOR COLUMNS AT ANY LEVEL NO MORE ALTERNATIVE BARS SHOULD BE SPLICED

L4/4
4. COMPRESSIVE STRENGTH OF CONCRETE @ 28TH DAY: 3. NOT MORE THAN
f'c = 2,500 psi FOR SLAB ON FILL 33% OF THE BARS SHALL BE SPLICED WITHIN THE REQUIREMENTS LAP LENGTH MINIMUM

L5/4
f'c = 3,000 psi FOR SUSPENDED SLABS DISTANCE BETWEEN TWO ADJACENT BAR SPLICES SHALL 600MM

(L5)
f'c = 3,000 psi FOR BEAMS & COLUMNS
4. TOP BARS ARE HORIZONTAL WITH MORE THAN 300MM DEPTH OF CONCRETE CAST
5. REINFORCING STEEL BARS (DEFORMED) YIELD STRENGTH:
fy = 33,000 psi (230 MPa) FOR BAR 10mm Ø SIZE BELOW THE REINFORCEMENT .
BOT. BARS ALONG LONG SPAN
fy = 40,000 psi (275 MPa) FOR BAR 12mm & 16mm Ø SIZE BOT BRS ALONG LONG SPAN
5. AS MUCH AS POSSIBLE SPLICES SUBJECTED TO TENSILE STRESSES ARE DISCOURAGE
6. MORTAR (1:4) CLASS C THESE SHOULD BE AVOIDED OR PROVIDED WITH STANDARD HOOKS SLAB PLAN LAYOUT
SCALE: NTS
ROUGH PLASTER (1:4) CLASS C
10MM Ø HORIZONTAL
0.10 BARS SPACED @ 0.20

BEAM SECTION BEAM SECTION

O.C

24- 25mm. Ø W/ 24 - 25 mm.

0.15
Ø VERTICAL BAR W/
MARK LEFT END MID SPAN RIGHT END LEFT END MID SPAN RIGHT END 12MMØ LATERAL TIES 10MM Ø HORIZONTAL
BARS

SECTION SECTION SECTION MARKBEAM SECTION SECTION SECTION SPACED @ 5-50MM,

SECTION HEADER
5-100MM, 5-150MM REST
AT 200MM
(CB1,B1,B2,
BEAM B3,B4,RB,CRB1 36 - 25 mm. Ø MATTING CL.
(TB1) ,RB1,RB2, BAR EQUALLY
RB3,RB4) DISTRIBUTED BOTH
WAYS
SIZE (mm) 700 x 900 700 x 900 700 x 900 SIZE (mm) 700 x 900 700 x 900 700 x 900
NGL. HEADER
TOP BARS 15-25 mm Ø 15-25 mm Ø 15-25 mm Ø TOP BARS 15-25 mm Ø 15-25 mm Ø 15-25 mm Ø

BOTTOM BOTTOM DOOR

15-25 mm Ø 15-25 mm Ø 15-25 mm Ø 15-25 mm Ø 15-25 mm Ø 15-25 mm Ø CL.
BARS BARS WINDOW

WEB BARS NONE NONE NONE WEB BARS NONE NONE NONE

STIRRUPS 12mm Ø. SPACED @ 5- 50mm., STIRRUPS 12mm Ø. SPACED @ 5- 50mm.,

5- 100mm., 5-150mm. REST 200mm. 5- 100mm., 5-150mm. REST 200mm. GRAVEL BASE COURSE ELEVATION

SECTION C1F1: PLAN C1F1:

SCALE: NTS. SCALE: NTS.

TIE BEAM SECOND FLOOR TO EIGHTH FLOOR ELEVATION

BEAM SCHEDULE BEAM SCHEDULE COLUMN AND FOOTING 1 DETAILS

SCALE: 1:30
SCALE: 1:30 SCALE: 1:30

LINTEL BEAM DETAILS

SCHEDULE OF COLUMN SCALE 1: 3 0 MTS.
LEVEL GROUND FLOOR TO ROOF
DECK
MARK C-1

DRAWING SCALE :NTS.

SCHEDULE OF FOOTINGS 2h

FOOTING DIMENSIONS EMBEDMENT TOP BARS BOTTOM BARS

SIZE (mm.) 800MM x 900MM MARK WIDTH, B LENGTH, L THICKNESS DEPTH X -DIRECTION Y -DIRECTION X -DIRECTION Y -DIRECTION REMARKS
(mm) (mm) t(mm) (mm) BARS BARS BARS
24-25MMØ
VERTICAL BAR 24-25MMØ 2000 2000 600 2000 NONE NONE 20-25mm
F1 BARS
12MMØ LATERAL TIES 20-25mm ISOLATED COLUMN
LATERAL TIES SPACED @ 5-50MM,
5-100MM, 5-150MM REST
AT 200MM BEAM REFERENCE ELEVATION
FOOTING SCHEDULE SCALE: NTS
SCALE: 1: 20MTS

CIVIL/STRUCTURAL ENGINEER : TITLE OF PROJECT : R.A. 9266, ARTICLE I V, SECTION 3 3: APPROVED AS TO PLAN & LOCATION : SHEET CONTENTS : SHEET NUMBER

D R A W I N G S A N D S P E C I F I C A T I O N A N D O T H E R C ON T R A C T D O C U M E N T S
DU LY SIGNED , STAMP ED, OR SEALED, AS INSTRUMENTS OF SERV ICE,
ARE THE INTELLECTUAL PROPERTY AND DOCUMENTS OF THE

S1
ARCHITECT, WHETHER THE OBJECT FOR WHICH THEY ARE MADE

PRC REG. NO: VALID DATE:

PROPOSED 4-STAR HOTEL EXECUTED OR NOT. IT SHALL BE UNLAWFUL FOR ANY PERSON TO AS SHOWN
D U PL I C A T E OR T O M AK E C OP I ES O F S AI D D O CU M EN T S F OR U SE I N T H E OWNER
REPETITION OF AN FOR OTHER PROJECTS OR BUILDINGS, WHETHER
1
PTR No: ISSUED ON: EXECUTED PARTLY OR IN WHOLE, WITHOUT WRITTEN CONSENT
OR A RCHIT ECT OR A UTHOR O F S AI D DOCUMENT S.

TIN No: ISSUED AT: LOCATION: - ADDRESS: