Scribd
Upload
4 views

How to upgrade your unit to version 5.2 on Windows

guide upgrade firmware 5.2 ifi device

Uploaded by

trinhdatdl1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

How to upgrade your unit to version 5.2 on Windows

guide upgrade firmware 5.2 ifi device

Uploaded by

trinhdatdl1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

How to upgrade your unit to version

5.2 on Windows.
You can find a video that walks you through the instructions below here:
https://youtu.be/xfv32H0QoIM.

Step 1: Locate the drivers folder.

1. Choose the firmware that you want to install: 5.2, 5.2A or 5.2B. For
information on each version, please read the release notes.
2. Make sure you have the iFi Windows drivers downloaded on your Windows
machine.
3. Locate the folder: C://Program Files/iFi/USB_HD_Audio_Driver and double
click on the iFiHDUSBAudio_dfuapp.exe file.

Step 2: Load the firmware file.

Load the firmware file by pressing the “Browse…” button and locating the
‘iFi_XMOS_5.2.bin’ file (it should be located in the same folder as this guide).
Step 3: Upgrading the firmware.

Upgrade the firmware by clicking “Start”.


When it is done, it will say “Firmware upgrade finished successfully.”

After the upgrade, please unplug the iFi device from your computer and completely
power it OFF before first use.

Note: On some computers, one needs to perform the upgrade process twice for the
upgrade to be successful. After the first go, the firmware version may still report it
has the original version, in which case, press “Start” again to perform another
upgrade (sometimes it just takes two attempts).

If you have any further questions, please open ticket in our support system.

You might also like