Surface Mount

Power Splitter/Combiner ADP-2-1+

2 Way-0° 50Ω 0.5 to 400 MHz
Maximum Ratings Features
• low insertion loss, 0.3 dB typ. Generic photo used for illustration purposes only
Operating Temperature -40°C to 85°C
Storage Temperature -55°C to 100°C
• excellent amplitude unbalance, 0.10 dB typ. CASE STYLE: CD636
• very good phase unbalance, 0.5 deg. typ. +RoHS Compliant
Power Input (as a splitter) 0.5W max. • aqueous washable The +Suffix identifies RoHS Compliance. See our web site
Internal Dissipation 0.125W max. for RoHS Compliance methodologies and qualifications
• protected under U.S. Patent 6,133,525
Permanent damage may occur if any of these limits are exceeded.
Applications e and Reel
Available Tapra cost
at no ext
• instrumentation Reel Size Devices/Reel
Pin Connections • VHF/UHF 7”
13”
20, 50, 100, 200
500, 1000
SUM PORT 1
PORT 1 3 Electrical Specifications
PORT 2 4 FREQ. ISOLATION INSERTION LOSS (dB) PHASE AMPLITUDE
RANGE (dB) ABOVE 3.0 dB UNBALANCE UNBALANCE
GROUND 6 (MHz) (Degrees) (dB)
Externally connect together & isolate 2,5
L M U L M U L M U L M U
Outline Drawing fL-fU Typ. Min. Typ. Min. Typ. Min. Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max.
0.5-400 25 20 25 20 25 20 0.2 0.4 0.3 0.6 0.5 1.0 1.0 2.0 3.0 0.1 0.2 0.3

L = 0.5-5 MHz M = 5-200 MHz U = 200-400 MHz

See Notes below.

Typical Performance Data

Frequency Total Loss1 Amplitude Isolation Phase VSWR VSWR VSWR
(MHz) (dB) Unbalance (dB) Unbalance S 1 2
(dB) (deg.)
S-1 S-2
PCB Land Pattern 0.50 3.13 3.13 0.00 30.12 0.03 1.06 1.08 1.08
10.00 3.13 3.13 0.00 34.46 0.05 1.03 1.01 1.01
30.00 3.16 3.16 0.00 33.18 0.04 1.03 1.01 1.01
60.00 3.18 3.19 0.01 31.23 0.04 1.04 1.01 1.01
90.00 3.21 3.21 0.00 29.53 0.11 1.05 1.01 1.01
120.00 3.21 3.22 0.01 28.15 0.07 1.06 1.02 1.02
160.00 3.26 3.25 0.01 26.67 0.12 1.08 1.02 1.02
200.00 3.28 3.27 0.01 25.63 0.08 1.09 1.03 1.03
Suggested Layout, 240.00 3.29 3.27 0.01 24.87 0.14 1.09 1.04 1.04
� .002
Tolerance to be within ±
280.00 3.34 3.35 0.00 24.45 0.19 1.09 1.05 1.05

Outline Dimensions ( inch

mm )
320.00
340.00
3.33
3.37
3.32
3.37
0.00
0.01
24.36
24.50
0.26
0.29
1.08
1.07
1.07
1.08
1.07
1.08
360.00 3.38 3.37 0.00 24.69 0.24 1.07 1.09 1.09
A B C D E F G
380.00 3.42 3.42 0.00 24.97 0.28 1.05 1.10 1.10
.272 .310 .220 .100 .162 .055 .100 400.00 3.41 3.41 0.00 25.39 0.37 1.04 1.11 1.12
6.91 7.87 5.59 2.54 4.11 1.40 2.54
1. Total Loss = Insertion Loss + 3dB splitter loss.
H J K L wt ADP-2-1 ADP-2-1
.030 .026 .065 .300 grams TOTAL LOSS ISOLATION
0.76 0.66 1.65 7.62 0.25 4.0 40
S-1(dB) S-2(dB)
3.8
TOTAL LOSS (dB)

35
ISOLATION (dB)

3.6
30
Demo Board MCL P/N: TB-208 3.4
Suggested PCB Layout (PL-116)
25
3.2

3.0 20
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
FREQUENCY (MHz) FREQUENCY (MHz)
ADP-2-1
VSWR
1.20
#S-VSWR #1-VSWR #2-VSWR
1.15 electrical schematic
VSWR

1.10

1.05

1.00
0 50 100 150 200 250 300 350 400
FREQUENCY (MHz)

Notes REV. F
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. M158496
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. ED-7586/2
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled ADP-2-1+
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp HY/TD/CP/AM

Mini-Circuits
® 200421

www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]