Enetek Power Group Pte Ltd

Web Interface

Version: 1.0

Page 1 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

Contact Information:

ENETEK POWER GROUP PTE LTD

8 Pandan Crescent (Lobby 5)
#04-03
Singapore 128464

Tel: +65 6873 2228

Fax: +65 6873 2229

[email protected]
www.enetek-power.com

Thank you for choosing Enetek.

For your own safety, please read this manual carefully before
installation and operation.

Page 2 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

All rights reserved: Enetek reserves the right to change the product and the content of this manual
without prior WARNING. Users are recommended to visit the company website at
www.enetek-power.com for more information about our new products and the latest versions of the
user manuals.

Page 3 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

Table of Contents
1. Introduction ...................................................................................................................................................... 5
2. Connection ........................................................................................................................................................ 5
3. Login.................................................................................................................................................................. 6
4. Home Screen ..................................................................................................................................................... 7
5. System Info........................................................................................................................................................ 8
5.1. Current Alarm Page................................................................................................................. 8
5.2. DC Load Info Page ................................................................................................................... 8
5.3. LVD Info Page .......................................................................................................................... 9
5.4. Running Info Page ................................................................................................................... 9
5.5. Power Module Page .............................................................................................................. 10
5.6. Battery Info Page .................................................................................................................. 10
5.7. BMS Info Page ....................................................................................................................... 11
5.8. DC Monitor Page ................................................................................................................... 11
5.9. DI Info Page ........................................................................................................................... 12
5.10. DO Info Page ......................................................................................................................... 12
5.11. Generator Info Page .............................................................................................................. 13
5.12. Event Log Page ...................................................................................................................... 13
5.13. Data Log Page ....................................................................................................................... 14

6. System Config.................................................................................................................................................. 15
6.1. System Config Page ............................................................................................................... 15
6.2. AC Config Page ...................................................................................................................... 15
6.3. DC Config Page ...................................................................................................................... 16
6.4. Power Module Page .............................................................................................................. 16
6.5. LVD Config Page .................................................................................................................... 17
6.6. Battery Config Page............................................................................................................... 17
6.7. Temperature Page ................................................................................................................. 18
6.8. Fan Config Page..................................................................................................................... 18
6.9. Network Config Page ............................................................................................................ 19
6.10. SNMP Config Page ................................................................................................................ 19
6.11. Other Config Page ................................................................................................................. 20

7. Upgrade Page .................................................................................................................................................. 21

8. About Page ...................................................................................................................................................... 21

Page 4 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

1. Introduction

Web Interface uses the Web browser and the Web Page it downloaded as the User Interface. By using the
Web Interface, the User will be able to communicate with the SMU01 Controller to retrieve information or to
control the setting of the Controller.

2. Connection

The web interface is accessed via the Ethernet port at the left side of the SMU01 Controller and by typing the
IP address of the monitor into the address bar of a Web browser. The browser will then display the web
pages as described below.

Note: The default IP address is 192.168.1.200.

For direct connection (from your computer to the SMU01, an Ethernet cross-over cable must be used) and
you must enter your TCP/IP set-up area on your computer to connect.

As the SMU01 IP address is xxx.xxx.1.200, you need to enter a different address in the last address field (i.e.
xxx.xxx.1.251)

Now open your web browser and enter http://192.168.1.200/ to view the SMU01 via web browser.

Page 5 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

3. Login

When the monitor is initially accessed over the web interface the above screen appears. To access the
monitor web interface, you must enter the approved username and password.

The monitor has two access levels:

 Monitoring Access
This access allows viewing of parameters only.
Default
Username: user
User Password: user

 Admin Access
This access allows complete viewing and editing of settings.
Default
Username: admin
Password: admin

Page 6 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

4. Home Screen

The home screen is an overview of all measurements taken by the monitor in the system and active alarms.
The GUI is displayed as a logical layout of the system including grid Input, Genset Input, PV Input, Rectifiers,
DC/DC Converters, Load and Battery status, alarm status and system information.

Page 7 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

5. System Info

The System Info includes all the system information: Current Alarm, DC Load Info, LVD Info, Running Info,
Power Module, Battery Info, DI Info, Do Info, Generator Info, Event Log and Data Log. Screens are to view all
measurements taken by the monitor in the system including AC Input, Rectifiers, DC/DC Converters, Load and
Battery status and etc.

5.1. Current Alarm Page

5.2. DC Load Info Page

Page 8 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.3. LVD Info Page

5.4. Running Info Page

Page 9 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.5. Power Module Page

5.6. Battery Info Page

Page 10 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.7. BMS Info Page

5.8. DC Monitor Page

Page 11 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.9. DI Info Page

5.10. DO Info Page

Page 12 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.11. Generator Info Page

5.12. Event Log Page

Page 13 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
5.13. Data Log Page

Page 14 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

6. System Config

6.1. System Config Page

6.2. AC Config Page

Page 15 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
6.3. DC Config Page

6.4. Power Module Page

Page 16 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
6.5. LVD Config Page

6.6. Battery Config Page

Page 17 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
6.7. Temperature Config Page

6.8. Fan Config Page

Page 18 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
6.9. Network Config Page

6.10. SNMP Config Page

Page 19 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd
6.11. Other Config Page

Page 20 Copyright Enetek Power Group Pte Ltd REV 1.0

 Enetek Power Group Pte Ltd

7. System Computing Upgrade Page

8. About Page

It shows the software version information.

Page 21 Copyright Enetek Power Group Pte Ltd REV 1.0