Scribd
Upload
22 views2 pages

PLC Splitter Specification-1

Uploaded by

raul.pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views2 pages

PLC Splitter Specification-1

Uploaded by

raul.pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PLC Splitter Specification

Description
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical
waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.
The single mode splitter with an even split ratio from one or two input fibers to multiple output fibers, it provides a low
cost, light distribution solution with small form factor and high reliability,
meet various application requirements.

Blockless PLC Splitter can provide stronger fiber protection with the compacted
stainless steel tube package.
It does not require fiber optic fusion during installation.
Mainly used for different connections above distribution boxes or network
cabinets.

No. Item Specification


1 Type PLC Splitter
2 Fiber Type G657A1, customized
3 Input Connector SC/FC/LC-UPC/APC, customized
4 Output Connector SC / FC / LC-UPC/APC, customized
5 Steel Tube Material Stainless Steel 304
6 Fiber Diameter 0.9/2.0/3.0 mm
7 Input / Output Fiber Length: Customized

Technical Specification

Model 1*2 1*4 1*8 1*16 1*32 1*64

Operating Wavelength nm 1260-1650

Insertion Loss Max. dB 3.8 7.1 10.2 13.5 16.8 20.1

Return Loss Min. dB UPC: 50/ APC: 55

PDL Max. dB 0.2 0.3 0.3 0.3 0.3 0.5

Uniformity Max. dB 0.5 0.6 0.8 1.2 1.5 2.0

Directivity Min. dB 55

Wavelength Dependent Loss (dB) Max. dB 1.0

Operating Temperature ℃ -40 ~ +85

Model 2*2 2*4 2*8 2*16 2*32 2*64


Operating Wavelength nm 1260-1650

Insertion Loss Max. dB 4.1 7.4 10.5 13.8 17.1 20.3

Return Loss Min. dB UPC: 50/ APC: 55

PDL Max. dB 0.2 0.3 0.3 0.3 0.3 0.5

Uniformity Max. dB 0.5 0.6 0.8 1.2 1.5 2.0

Directivity Min. dB 55

Wavelength Dependent Loss (dB) Max. dB 1.0

Operating Temperature ℃ -40 ~ +85

Fiber Specification

Single Mode G.657A/ IEC 60793-2-50

Mode field Cladding Non colored Colored coating


Mode field diameter Cladding diameter
eccentricity error non-circularity coating diameter diameter

8.9 um ± 0.4 um ≤ 0.5 um 125 ±0.5 µm ≤ 0.7 % 245 ± 5 µm 250 um ± 15 um

Wavelength (nm) 1310 1383 1550 1625

Chromatic Dispersion (ps/nm.km) 3.5 18 18 22

Attenuation (dB/km) < 0.35 < 0.35 < 0.25 < 0.25

Bending Loss 100 turns on 60mm mandrel diameter ≤0.05


(dB) 100 turns on 30mm mandrel diameter ≤1.0

PMD (ps /√km) ≤ 0.2 ps/km1/2

Cabled fiber cut off wavelength (nm) ≤1260 nm

Operating Temperature (℃) -60 ~ +85

You might also like