Scribd
Upload
1 views

INFORME

Uploaded by

JEISON GOMEZ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1 views

INFORME

Uploaded by

JEISON GOMEZ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Tahoe Design Software's HYDROFLO 2.

0 enero 30, 2025, 09:16 PM


Copyright 2005 (c) All Rights Reserved. www.tahoesoft.com Academic Version

Complete Report
Project file: - Solved

Project Information Static Head Data


Project: Source Elev: 120.00 mtr
Client: Source Pressure: 0.00 mtr liq
Engineer: Source HGL: 120.00 mtr
Firm: Discharge Elev: 85.00 mtr
Address: Discharge Pressure: 0.00 mtr liq
Discharge HGL: 85.00 mtr
Phone: Total Static Head: -35.00 mtr
Fax:
email:

System Information Liquid Properties


Pipe Head Loss Eq.: Darcy-Weisbach Water,Saturated at 70 deg F
Tolerance: 6.3E-05 ltr/s Temperature: 21.11 C
Atmospheric Press: 101.35 Kpa Specific Gravity: 0.99
Total Elements: 7 Viscosity: 1E-06 m2/s
Total Parallels: 0 Vapor Pressure: 2.48 Kpa (abs)
Specific Heat: 1.00 Cal/grC

Element Data by type...

Supplys: Pressure Elev Flow HGL


ID Type (mtlq) (mtrs) (L/s ) In/Out (mtrs)
1 reservoir/tank (open) 0.00 120.00 249.89 out 120.00
Inlet/Exit: No pipe inlet/exit losse, Elev=0.00 mtrs
7 reservoir/tank (open) 0.00 85.00 249.89 in 85.00
Inlet/Exit: No pipe inlet/exit losse, Elev=0.00 mtrs

Pipes: Length Fric Nom D In Dia Flow Direction Vel Head Loss
ID Spec (mtrs) (mm) (mm ) (mm ) (L/s ) ->ID (m/s ) (mtlq)
3 NA 320.00 0.002 NA 246.550 249.89 ->4 5.23 20.52
5 NA 180.00 0.002 NA 246.550 249.89 ->6 5.23 11.54

Valves & Fittings: Fric Diameter Flow Direction Head Loss


ID Description K (mm ) (L/s ) ->ID (mtlq)
2 Custom Fitting 0.50 246.550 249.89 ->3 0.70
4 Custom Fitting 0.60 246.550 249.89 ->5 0.84
6 Custom Fitting 1.00 246.550 249.89 ->7 1.40

Element Data in sequence...

Elements in sequence Pressure Elev Head Change HGL


ID Type Desc (mtlq) (mtrs) (mtlq) (mtlq)
Start of Main Line - source side...
1 Supply reservoir/tank (open) 0.00 120.00 120.00
Inlet/Exit: Type=No pipe inlet/exit losses 0.00 120.00
2 Fitt Custom Fitting -0.70 119.30
3 Pipe -20.52 98.78
4 Fitt Custom Fitting -0.84 97.94
5 Pipe -11.54 86.40
6 Fitt Custom Fitting -1.40 85.00

Project file: - Solved Page 1


Tahoe Design Software's HYDROFLO 2.0 enero 30, 2025, 09:16 PM
Copyright 2005 (c) All Rights Reserved. www.tahoesoft.com Academic Version

Element Data in sequence...

Elements in sequence Pressure Elev Head Change HGL


ID Type Desc (mtlq) (mtrs) (mtlq) (mtlq)
Inlet/Exit: Type=No pipe inlet/exit losses 0.00 85.00
7 Supply reservoir/tank (open) 0.00 85.00 85.00
End of Main Line - discharge side...

Project file: - Solved Page 2


Tahoe Design Software's HYDROFLO 2.0 enero 30, 2025, 09:16 PM
Copyright 2005 (c) All Rights Reserved. www.tahoesoft.com Academic Version

Project: Liquid: Water,Saturated at 70 deg F

Main Line (not to scale)

Project file: - Solved Page 3

You might also like