Q SEXTANT

F9111

NG SPEED AND LIMIT DEVIATION

INDICATOR

PARTNUMBER

P/N 5633-710-80-I 1
P/N 5633-711-80-l 0
P/N 5633-712-20-I 1

COMPONENTMAINTENANCEMANUAL
WITH
ILLUSTRATEDPARTSLIST

77-l 9-86A
I Manufactured
0
by 0 SEXTANT in FRANCE
COPYRIGHT THOMSON-CSF SEXTANT 2000
TP Page 1
APR 28/00
This document is the property of THOMSON-CSF SEXTANT
and contains proprietary and confidential information which shall
neither be duplicated nor disclosed to others without the prior
written consent of THOMSON-CSF SEXTANT. The recipient
shall not use this document for any purpose other than the
installation or maintenance of the relevant equipment and shall
return it promptly to THOMSON-CSF SEXTANT upon request.

Users are kindly requested to notify THOMSON-CSF SEXTANT

of any discrepancy, omission or error found in this manual

Please send your comments to :

0 SEXTANT
Documentation Department
Aerodrome de Villacoublay - B.P. 59
78141 Velizy Villacoublay Cedex France

IF YOU ARE CALLING FROM INSIDE FRANCE :

Tel : 01 46 29 70 00 - Telex SXT 631 240F
Fax. 01 46 29 77 17 - SITA . PARFNCR

IF YOU ARE CALLING FROM ABROAD :

Tel : + 33 1 46 29 70 00 - Telex SXT 631 240F
Fax: + 33 1 46 29 77 17 - SITA : PARFNCR
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

To : Indicators No 5633-710-80-l 1
5633-711-80-l 0
5633-712-20-l 1

Component Maintenance Manual 77-19-86

HIGHLIGHTS

- REVISION No 2 - FEB 28/94

Pages which have been added or revised are outlined below together with the highlights of the revision.

Please, remove and insert the affected pages

- as listed and enter Sheet Revision No 2 dated FEB 28/94 to
the Record of revision.
Deleted

Added
Revised

PAGE DESIGNATION SUMMARY OF CHANGE

Title page X Change of date

Record of revisions Page l/2 X Revised text
List of modifications Page 1 X New page
2 X New page
List of effective Pages Pages 1 X Revised text
2 X Revised text
List of service centers Page l/2 X New page
Introduction Page l/2 X Revised text
Pages 109 X Revised text
110 X Revised text
111 X Revised text
112 X Revised text
114 X Revised text
115 X Revised text
116 X Revised text
304 X Revised text
701 X Revised text
1004 X Revised text
1005 X Revised text
1006 X Revised text
1007/1008 X New page

77-19-86
Page l/2
FEB 28/94
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

Deleted

Added
Revised

PAGE DESIGNATION REASON FOR CHANGE

Ni Alpha-Num 1001 Pages 1 X Revised text

2 X Revised text
3 X Revised text
4 X Revised text
5 X Revised text
6 X Revised text
7 X Revised text

Pages 1001-l X Revised text

1001-2 X Revised text
1001-3 X Revised text
1002-o X Revised figure
1002-2 X Revised text
1002-3 X Revised text
1006-2 X Revised text

77-19-86
Page 212
FE6 20194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

RECORD OF REVISIONS

Rev ISSUE DATE Rev ISSUE DATE

BY BY
No DATE INSERTED No DATE INSERTED

1 JUN 30/92

2 FEB 28194

77-19-86
RECORD OF REVISIONS Page l/2
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

RECORD
._- -. TEMPORARY
__._ - OF _- _-_. -___ -__. REVISIONS
_-----_----

TEMPORARY INCORPORATED CANCELLED

REVISION
No Page ISSUE PERMANENT
DATE BY DATE BY
No DATE (REVISION No)

- --
77-1 9-86
RECORD OF TEMPORARY REVISIONS Page l/2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
LIST OF MODlFlCATlONS TO INDICATOR P/N 5633-710-8&l 1

AMD’ BRIEF DESCRIPTION APPLICABLE TO VERSION

A Improved stabilization of last digit in display From no 163

B Modification to construction of body and cage From no200

C Elimination of vibrations of test button From no257

D Elimination of loss of displays on LCD From no263

77-l 9-86
LIST OF MODIFICATIONS Page 1
FEB 26/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
LIST OF MODIFICATIONS TO INDICATOR P/N 5633-71 l-80-10

AMD’ BRIEF DESCRIPTION APPUCABLE TO VERSIONS

A Improved stabilization of last digit in display From no 103

B Modification to construction of body and cage From no 127

C Elimination of vibrations of test button From no 216

D Elimination of loss of displays on LCD From no368

77-l 9-86
LIST OF MODIFICATIONS Page 2
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

SERVICE BULLETIN LIST

MODE
SERV’CE STATE DATE DESCRIPTION
BULLETIN
IDENT.

774 9-86
SERVICE BULLETIN LIST Page l/2
JUN 30/91
 Q SEXTANT
COMPONENTMAINTENANCEMANUAL
5633-710-80-11

LIST OF EFFECTIVE PAGES

SUBJECT plGJ pATJ SUBJECT PAGE pi-J

Title Page Description 1 JUN 30/92

TP 1 APR 28/00* and Operation 2 JUN 30/92
3 JUN 30/92
Record of 4 Blank
Revisions 5 JUN 30/92
ROR 1 FEB 28194 6 JUN 30/91
ROR 2 Blank 7 JUN 30/92
8 JUN 30/92
Record of Tem- 9 JUN 30/92
porary Revisions 10 JUN 39/92
RTR 1 JUN 30/91 11 JUN 30/92
RTR 2 Blank 12 JUN 30/92
13 JUN 30/92
List of Modifications 14 Blank
LM 1 FEB 28194 15 JUN 30/92
LM 2 FEB 28194 16 Blank
17 JUN 30/92
Service Bulletin 18 Blank
List 19 JUN 30/92
SBL 1 JUN 30/91 20 Blank
SBL 2 Blank 21 JUN 30/92
22 Blank
List of Effec- 23 JUN 30/92
tive Pages 24 Blank
LEP 1 APR 28/00*
LEP 2 APR 28/00* Testing and 101 JUN 30/91
Fault 102 JUN 30/91
Isolation 103 JUN 30/91
Table of Contents 104 JUN 30/92
TC 1 JUN 30/91 105 JUN 30/92
TC 2 Blank 106 JUN 30/92
107 JUN 30/92
List of 108 JUN 30/92
11lustrations 1 APR 28/00* 109 FEB 28194
2 Blank 110 FEB 28194
111 FEB 28194
List of Service 1 FEB 28194 112 FEB 28/94
Centers 2 Blank 113 JUN 30/92
114 FEB 28194
Introduction 1 FEB 28194 115 FEB 28194
2 Blank 116 FEB 28/94

* indicates pages modified, deleted or inserted by last revision 77-19-86A

0 THOMSON-CSF SEXTANT 2000.
LEP Page 1
This document and any data included are the property of THOMSON-CSF SEXTANT They
cannot be reproduced, disclosed or utilized without the company’s prior written approval
APR 28/00
 0 SEXTANT
COMPONENTMAINTENANCEMANUAL
5633-710-80-11

LIST OF EFFECTIVE PAGES

SUBJECT PAGE DATE SUBJECT PAGE

Disassembly 301 JUN 30/91 7 FEB 28194

302 JUN 30/91
303 JUN 30/91 Detailed Parts List
304 FEB 28194 1001 1 JUN 30/91
2 Blank
Cleaning 401 APR '28/00*
402 Blank 1001-O JUN 30/91
1001-l FEB 28194
Check 501 JUN 30/91 1001-Z FEB 28194
502 Blank 1001-3 FEB 28194

Repair 601 JUN 30/91 1002-O FEB 28/94

602 Blank 1002-l JUN 30/92
1002-2 FEB 28194
Assembly 701 FEB 28194 1002-3 FEB 28194
(including 702 JUN 30/91
storage) 703 JUN 30/91 1003-O JUN 30/91
704 JUN 30/91 1003- 1 JUN 30/91
1003-Z JUN 30/91
Illustrated 1001 JUN 30/91
Parts List 1002 JUN 30/91 1004-O JUN 30/91
Introduction 1003 JUN 30/91 1004- 1 JUN 30/91
1004 FEB 28194 1004-Z JUN 30/91
1005 FEB 28194 1004-3 JUN 30/91
1006 FEB 28194
1007 FEB 28194 1005-O JUN 30/91
1008 Blank 1005-l JUN 30/91
1005-Z JUN 30/91
ED1 1001 JUN 30/91 1005-3 JUN 30/91
JUN 30/91 1005-4 JUN 30/91
JUN 30/91
JUN 30/91 1006-O JUN 30/91
JUN 30/91 1006-l JUN 30/92
JUN 30/91 1006-Z FEB 28194

NI Alpha 1001 1 FEB 28194

2 FEB 28194
3 FEB 28194
4 FEB 28194
5 FEB 28/94
6 FEB 28194

77-1 g-8649
0 THOMSON-CSF SEXTANT 2000. LEP Page 2
This document and any data included are the properly of THOMSONGSF SEXTANT They
cannot be reproduced. disclosed or utilized without the company’s prior written approvti
APR 28/00
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-60-11

TABLE OF CONTENTS

Page

DESCRIPTION AND OPERATION ............................. 1

TESTING AND FAULT ISOLATION ............................. 101

AUTOMATIC TEST REQUIREMENTS (ATLAS) ....................... Not applicable

DISASSEMBLY ....................................... 301

CLEANING.. ........................................ 401

CHECK ............................................ 501

REPAlR ........................................... 601

ASSEMBLY (Including storage) ............................... 701

FITS AND CLEARANCES .................................. Not applicable

SPECIAL TOOLS, FIXTURESAND EQUIPMENT ..................... Not applicable

ILLUSTRATEDPARTS LIST ................................. 1001

77-l 9-86
TABLE OF CONTENTS Page l/2
JUN 30/91
 G SEXTANT
COMPONENTMAINTENANCEMANUAL
5633-710-80-11

LIST OF ILLUSTRATIONS

Page

FIGURES No

1 APPEARANCEAND OUTLINE DIMENSIONS ................. 314

2 DESCRIPTION ................................. 6

3 POWERSUPPLY PC6 ............................. 15/16

4 MICROPROCESSORPCB ........................... 17118

5 CONDITIONING PCB .............................. 19120

6 LIGHTING-SMMOTHING PCB ......................... 21122

7 INTERCONNECTIONDIAGRAM ........................ 23124

101 TEST SETUP .................................. 102

DETAILEDPARTSLIST

1 NG SPEED AND LIMIT DEVIATION INDICATOR ............... 1001-O

2 NG SPEED AND LIMIT DEVIATION INDICATOR (CONT’D) .......... 1002-O

3 LIGHTING-SMOOTHING PCB ......................... 1003-O

4 POWERSUPPLY PCB ............................. 1004-O

5 CONDITIONING PCB .............................. 1005-O

6 MICROPROCESSORPCB WITH MEMORY .................. 1006-O

77-l 9-86A
0 THOMSON-CSF SEXTANT 2000. LI Page 1
This document and any data included are the property of THOMSON-CSF SEXTANT They
cannot be reproduced, disclosed or utilized without the company’s prior written apprOvd APR 28/00
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

LIST OF SERVICE CENTERS

BRION LEROUX Aeronautique - Repair Dept Tel. (1) 49.39.43.46

2 814 rue Isaac Newton - B.P. 90 Fax (1) 48.65.29.65
93152 LE BLANC MESNIL CEDEX Tlx 230183F
FRANCE

BIEDERMAN Inc. Tel. (818) 2468431

1045, Airway Fax (818) 243-8965
GLENDALE, CA 91201- 3095 Tlx 677204
U.S.A.

BIGORRE AEROSPACE Corp. Tel. (813) 525-8115

Suite 11076543 Fax (813) 522-5820
46 th Street North Tlx 984897
PINELLAS PARK FL 34655
U.S.A.

HERMETIC AIRCRAFT INTERNATIONAL CORP. Tel. (516) 7584242

A Westland Technologies Company Fax (516) 758-1428
100 Corporate Drive Tlx 96-1329
HOLTSVILLE, NY 11742
N.Y. 11735
U.S.A.

HUNTING AVIATION ACCESSORIES Tel. (1) 680-3776

61 Imperial way Fax (1) 681-5926
Croydon Tlx 8813793
SURREY, CR0 4RR
UNITED KINGDOM
ENGLAND

JAMCO CORPORATION Tel. 81.422.31.6119

AIRCRAFT ACCESSORIES DIVISION Fax 81.422.31.8910
6-1l-25 OSAWA. MITAKA. TOKYO 181
JAPAN

MOTORTEC INDUSTRIA AERONAUTICA S/A Tel. (21) 325 9044

Av. Alvorado 2541, Aeroporto de Jacaropagua Fax (21) 325 6516
Barra da Tijuca
22775-000 Rio de Janeiro - RJ BRAZIL

77-l 9-86
LIST OF SERVICE CENTERS Page l/2
FEV 28194
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

INTRODUCTION

This manual is published for the guidance of personnal responsible for the overhaul of the BRION LEROUX
AERONAUTIQUE assembly covered in this publication.

The prodecure described In this manual may be altered if better and/or more economical methods can be
employed by the individual facilities.

However, the alternate procedures must not lessen the efficiency of operation of the assembly, and all torque
and specific limits or values contained herein must be strictly observed.

77-I 9-86
INTRO Page l/2
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

DESCRIPTION AND OPERATION

1 - GENERAL

A. Purpose

The NG speed and limit deviation indicators are intended for mounting on the instrument panel of the
helicopter. They provide the following information to the crew :
- a digital indication of the true NG speed
- an analog representation of the ANG, the deviation between the value of the true speed and the current
limitation of the engine, depending on the operating conditions of the latter,
- the status of the engine discharge valve.

B. Specifications

I Power supply for indicators P/N 5633-710-80-l 1 and 5633-711-80-l0 :

- processing circuitry 28 VDC aircraft mains

- display illumination control day-time lighting “NORM” (28 V)

night time lighting “DIM” (14 V)
- dial illumination 28 V lighting supply

Power supply for indicator P/N 5633-712-20-l 1 :

- processing circuitry and display illumination : 28 VDC aircraft mains

- display illumination control day-time lighting “NORM” (28 V)
night-time lighting “DIM” (14 V)
low level lighting “NVG” (9 V)
- dial illumination 28 V lighting supply

Input signals :
- NG speed:
- low frequency sinewave signal
- accordind to standard MIL-G-26611
- frequency in Hz = rotational speed in rps
- Temperature sensor : thermistor
- LCD flashing control
- Discharge valve opening signal

774 9-86
Page 1
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
Output signals :
- 3 discrete logic signals : “STOR”
- O-5V analog “AIDS” output : NG speed

Display :
- Analog display of limit deviation ANG :
- Graduations : see Fig. 1
- Digial display of NG speed :
- 3 l/2 digits with fixed decimal
- lighted TN-type LCD
- display heating
- glare-proof
- Accuracy :
- digital indication :
- c 0.1 % of NG, from 10% of NG to 199.9 % of NG
- analog indication class 1.5
- “AIDS” outputs class 1.5
- “STOR” class 0.2
- Cross-hatched green and yellow flag displayed in the event discharge valve opens (NVG cross-hat-
ching for indicator P/N 5633-712-20-l 1)

Built-in test pushbuton on front panel (NVG marking for indicator P/N 5633-712-20-l 1).

2- DESCRIPTION

A. Dimensions and weight (Figure 1)

The indicator’s dimensions are given in Figure 1. Each unit weighs less than 800 g.

B. Description (Figure 2)

The indicator consists of the following parts :

- dial glass (1)
- front panel (2)
- pointer (3)
- pointer lighting assembly (4)
- multiplier (5)
- motor assembly (6)

77-l 9-86
Page2 R
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
- case (7)
- “LIGHTING SMOOTHING” circuit (8)
- “POWER SUPPLY” PCB (9)
- warning plate for dielectric strength test (10)
- warranty band (11)
- identification plate (12)
- base assembly (13)
- indicator external connector (14)
- connector gasket (15)
- intermediate assembly (16)
- filter-holder plate (17)
- “MICROPROCESSOR” PCB (18)
- PC board insulation (19)
- “CONDITIONING” PCB (20)
- altitude sensor circuit (21)
- active portion of pushbutton (22)
- LCD lighting assembly (23)
- LCD circuit (24)
- test pushbutton (25)

3 -OPERATION

A. Driving parts

The driving parts include :

- the limit deviation analog indicating system,
- the flag to indicate opening of the discharge valve.

(1) Limit deviation

Display of the limit deviation is achieved with the help of a servo-galvanometer with a useful deflection
of 170”. This servometer comprises a motor winding, a tachometer winding and an angle detection
system. The technology used ensures very short response times.

Angle detection is done potentiometrically by means of a plastic track and a cursor (slide) fast with the
motor shaft.

77-l 9-86
Page 5 R
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

-----’
254 F
1~ \

24H 3c
!4
4
23

20

17
19

-----8
18

17

\ ,l 1
16

\ -12
15

,13

DESCRIPTION
Figure 2

77-l 9-86
Page 6
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
The tachometer winding is superposed on the motor winding. It generates a signal proportional to the
rotational speed of the pointer in order to damp the latter’s movement (see CONDITIONING PCB).

A set of gears is used to multiply the deflection of the motor shaft. A spiral return spring, located on the
output shaft, totally cancels the gearing and returns the pointer to the downscale stop in the event of
power failure.

The servometer is interchangeable. When replaced, only the pointer span (full scale deflection) and zero
need adjustment (see CONDITIONING PCB).

(2) Discharge Valve OPEN Flag

This indication is achieved by means of a galvanometer with a single winding.

No adjustments are required when replacing the flag’s galvanometer.

B. POWER SUPPLY PCB (Figure 3)

The POWER SUPPLY PC board receives the 28 VDC aircraft mains voltage and generates the stabilized
DC voltages ( + 9 V, + 5 V, -5.168 V, -9 V, -22 V) required by the various indicator circuits.

The - 5.168 VDC is obtained by dividing the - 9 V.

C. MICROPROCESSOR PCB (Figure 4)

(1) Hardware architecture

The circuits on this board are configured around a 6800~series8-bit processor (Ul) clocked by a quartz
crystal (CLl).

Microprocessor operation is controlled by a watchdog circuit (U6). If the latter is not activated by the
microprocessor (port 1B6), a RESET command is sent to the microprocessor.

The circuits U13 and U14 handle digital to analog conversion (DAC) of the signal controlling the
servometer.

The MICROPROCESSOR board’s input/output interface is provided by a peripheral interface adapter

circuit (PIA) (U4).

The LCDs are controlled via circuits U8 to Ul 1.

77-l 9-86
Page7 R
JUN 30192
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
(2) Computation of the limit deviation

The deflection “D” of the pointer is computed, from the value of the “NG” speed (as a percent of nominal
speed) and from a tabulated value ‘A” [A = NG(PMD)] or [A’ = NG (PMU) ] (depending on the
indicator), using the following formulas :

indicators PIN 5633-710~80-11 and 5633-712-20-l 1

-ifNGi A D= NG-A

NG-A
-ifNG> A D= 6
107.5 -A

Indicator PIN 5633-71l-80-10

- ifNG 5 A-1.35 D= 0.92 (NG - A’ + 1.35)

- ifA’-1.35 c NG c A’ : D = 1.5 + 1.11 (NG-A’)

NG-A
-ifNG> A’ : D= 1.5+4.5
107.5 - A’

The value of “D” must be within -11 and +6 or + 7, depending on the indicator.

If I’D” c - 11, the pointer position will be forced to its electronic downscale stop (visually distinct from
the “-11” scale mark).

If “D” > +6 or 7, the pointer position will be forced to the ‘I+6” or “7” scale mark.

The pointer servometer control signal (DAC) is developed through a digital-to-analog converter.

The values of “A or A’ ” are defined as a function of the outside pressure (representing the altitude) and
the temperature, according to the following tables :

77-l 9-86
Page 8
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENTMAINTENANCEMANUALWITHIPL
5633-710-80-11

Indicators P/N 5633-710-80-11 end 5633-712-20-11

Outside temperature in degrees Celsius

- 35.0 - 2.5 12.5 17.5 22.5 27.5 32.5 37.5 42.5

-1000
102.4 102.4 102.4 102.3 102.2 102.0 101.8 101.6 101.3 101.2
0
102.3 102.3 102.3 102.2 102.1 101.9 101.7 101.5 101.2 101.1
2000
102.2 102.2 102.2 102.1 102.0 101.8 101.6 101.4 101.1 101.0
4000
102.1 102.1 102.1 102.0 101.9 101.7 101.5 101.3 101.0 101.0*
6000
102.0 102.0 102.0 101.9 101.8 101.6 101.4 101.2 101.0* 101.0*
8000
101.9 101.9 101.9 101.8 101.7 101.5 101.3 101.1* 101.0* 101.0*
10000
101.8 101.8 101.8 101.7 101.6 101.4 101.2* 101.0* 101.0* 101.0*
12000
101.7 101.7 101.7 101.6 101.5 101.3* 101.1* 101.0* 101.0* 101.0*
14000
101.6 101.6 101.6 101.5 101.4* 101.2* 101.0* 101.0* 101.0* 101.0*
16000
101.5 101.5 101.5 101.4* 101.3* 101.1* 101.0* 101.0* 101.0" 101.0*
18000
101.4 101.4 101.4 101.3* 101.2* 101.0* 101.0* 101.0* 101.0* 101.0*
19000

t Altitude in feet, as determined from the external pressure

xXx.x* : Values not defined by the normal law

PMD TABLE

77-19-86
Page9
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENTMAINTENANCEMANUALWITHIPL
5633-710-80-11

Indicator PIN 5633-71l-80- 10

Outside temperature in degrees Celsius

- 35.0 - 2.5 12.5 17.5 22.5 27.5 32.5 37.5 42.5

-1000 w
103.2* 103.2* 103.2* 103.2* 103.2* 103.1* 102.9* 102.7 102.5 102.2
0 -
103.2* 103.2* 103.2* 103.2 103.1 103.0 102.8 102.6 102.4 102.1
2000 -
103.2 103.2. 103.2 103.1 103.0 102.9 102.7 102.5 102.3 102.0
4000 -
103.1 103.1 103.1 103.0 102.9 102.8 102.6 102.4 102.0 102.0*
6000 -
103.0 103.0 103.0 102.9 102.8 102.7 102.5 102.3 102.1* 102.0*
8000 -
102.9 102.9 102.8 102.8 102.7 102.6 102.4 102.2* 102.0* 102.0*
10000 -
102.8 102.8 102.8 102.7 102.6 102.5 102.3* 102.1* 102.0* 102.0*
12000 -
102.7 102.7 102.7 102.6 102.5 102.4* 102.2* 102.0* 102.0* 102.0*
14000 -
102.6 102.6 102.6 102.5 102.4* 102.3* 102.1* 102.0* 102.0* 102.0*
16000 -
102.5 102.5 102.5 102.4" 102.3* 102.2* 102.0* 102-O* 102.0* 102.0*
18000 -
102.4 102.4 102.4 102.3* 102.2* 102.1* 102.0* 102-O* 102.0* 102.0*
19000 -

T
Altitude in feet, as determined from the external pressure

xXx.x* : Values not defined by the normal law

PMU TABLE

77-l 91186
Page 10
JUN 30192
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

(3) Computation of the Numerical Indication of the NG speed

The digital, ie. numerical, indication “I” of the LCDs is expressed as a percentage of the nominal
(rated) speed (NG nom = 8401 rpm).

The “I” indication can vary between “00.0” and “199.9’ and it is computed, based upon the NG speed
expressed in rpm, by the following formula :
NG
I = 100 -
8401

(4) Internal and External Autotests

The test sequence is activated by pressing the test pushbutton on the front of the indicator. It serves to
check the operation of the following circuits :
- data processing circuits : microprocessor, clock, memory,
- analog display circuits : motor, D/A converter,
- digital display circuits : LCDs, buffer memory,
- ‘flag” circuits,
- external temperature probe.

The test sequence is as follows :

- immediately after the button is pressed :
- for about 1 second :
- lighting of all segments in the LCDs,
- for about 5 seconds :
- analog display of “ANG = O”,
- going to “1” of all three “STOR” outputs,
- going to 5 volts of the “AIDS” output.
- after 1 second : displaying for 1 second of one of the three following messages :
- “---“if temperature probe is operational
- ‘I-LC’if temperature probe is short-circuited
- “-LH”if temperature probe is open-circuited
- after 2 seconds : displaying for 3 seconds of the “NG(PMD)” or “NG (PMU) - 1,35” (depending on
the indicator) value determined by the indicator’s internal algorithm (refer to “TESTING AND FAULT
ISOLATION” section).

77-l 9-86
Page 11
JUN 30192
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

D. CONDITIONING PC6 (Figure 5)

This PC board performs the following functions :

- control of “pointer’ servometer,
- control of ‘fiag” galvanometer,
- accounting of signals sent by :
- speed sensor,
- temperature sensor,
- “altitude” sensor,
- shaping of “STOR” digital signals,
- shaping of “AIDS” analog signal.

The output stage (U2, Ql and Q2) delivers the control voltage for the servometer motor winding in response
to the following control signals :
- the servometer control voltage, “DAC”, sent by the “MICROPROCESSOR” PCB,
- the output voltage from the tachometer winding,
- the zero point adjustment voltage (potentiometer Pl).

Potentiometer P2 serves to adjust the pointer’s span (full scale deflection).

The flag motor is switched on when the external status report “discharge valve control” goes to “OV”(valve F
opened). The corresponding input is at high impedance if the valve is closed.

The signals received from the speed (‘I, temperaturet2) and altitude(3)sensors are read by the CONDITIO-
NING PCB, then forwarded to the microprocessor.

The “AIDS” analog signal is the copy of the “I” indication. Its characteristics are as follows :

S = 0 V when “I” = 0
S = 5 V when “I” 1 106 %

The external command to flash the displays is sent to the microprocessor.

NOTES :

(1) The speed sensor is a tachogenerator which supplies a sinewave whose frequency is the same as the
rotational speed in revolutions per second.

(2) The temperature sensor is a thermistor.

(3) The altitude sensor is described in Section 2-E.

77-19-86
Page12 R
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

The “STORl”, STOR2” and “STOR3” signals correspond to preset thresholds of the ANG parameter.

They are developed, based on commands from the microprocessor, in accordance with the following table :

STORl STOR2 STOR3 ANG

0 0 1 -3.5
1 0 1 0.4
1 1 1 0.8

E. ALTITUDE SENSOR Circuit

The ALTITUDE SENSOR circuit is mounted on the CONDITIONING PCB. It consists of a compensated
piezo-resistive cell sensitive to the external pressure. Its measuring range is from - 1000 to + 20,000 feet.

F. LIGHTING SMOOTHING PCB (Figure 6)

The LIGHTING SMOOTHING PCB performs the following functions :

- lighting of the LCDs,
- overall power supply to the instrument.

The LCDs are lighted from the 28 V aircraft mains.

Modulation of the LCD lighting is achieved by the “NORM/DIM” (indicators P/N 5633-710-80-11 and
5633-711-80-l 0) or “NORM/DIM/JVN” (indicator P/N 5633-712-20-l 1) external analog control, which varies
the cycle ratio of the current flowing in the LCDs. Potentiometers Pl and P2 respectively serve to adjust the
lighting’s intensity.

G. Filter-holder Plate (Figures 2 and 7)

The filter-holder plate provides RFI/EMI protection for the indicator.

77-19-86
Page 13114
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-11

I*
I
I
=.
I I
I

I
l I

I
I
I
6,
u2 7 I
II c7 r 5- . I

m
11
-‘:
7
;a
I
I I

LIGHTING-SMOOTHING PCB
Figure 6

77-l 9-86
Page 19/20
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5533-710-80-11

i
II
I
I

I
I

I
I I

I
I
I
I
II c7 r I
I

1 R! I
Y. =. z.
I
I

LIGHTING-SMOOTHING PCB
Figure 6

77-19-86
Page 21/22 R
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

TESTING AND FAULT ISOLATION

1 -REQUIRED EQUIPMENT

- 1 28 VCC, 1 A adjustable power supply (Ul)

- 1 14 and 28 VCC, 1 A power supply (U2)
- 1 28 VCC, 300 mA adjustable power supply (U3)
- 7 single-pole switches (SW1 to SW7)
- 3 3-position selector switches (Cl to C3)
- 1 Milliohmmeter (M)
- 1 Ohmmeter (0)
- 1 Voltmeter, range 20 V, class 0.1 (V)
- 2 Ammeters, range 2A, class 0.1 ( I1 , 12)
- 1 Sinewave voltage generator , 10 to 300 Hz, accuracy f 0.01 Hz (G)
- 1 Decade resistor box, 1600 0 - 100 kS2,accuracy + 0.1 8 (R)
- 1 1OkQ a100Qresistor 1/4W(Rl)
- 1 Vacuum chamber (EV)
pressure range : atmospheric to 500 mbar
accuracy + 10 mbar

2 -TESTING

A. Test setup

- Setup the test circuit of Figure 101, observing the following initial conditions :

SW1 : open Ul = 28V G : frequency = 142.96 Hz

SW2 : open u2 = 28V : voltage = 2.5V rms
SW3 : open u3 = 28V : sine function
SW4 : open R = 5000Q
SW5 : open
SW6 : open
SW7 : open
Cl : position 2
c2 : position 2
c3 : position 2
Pressure = Atmospheric pressure

77-l 9-86
Page 101
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-l 1

I
+ -. ,+
12
u3
E ~-

u2
N -+
UNIT
UNDER Cl O’
TEST GA
G

c2 O’*
Li-
R
M I

TEST SETUP
Figure 101

77-l 9-86
Page 102
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
Table Al : when displayed value is “102.1” or “101.7” (depending on the indicator)
I
- With the help of the sinewave generator, align the pointer with the scale marks in the table and check
that in each case the frequency is within the indicated tolerances :

Displayed value “102.1” (Indicators P/N 5633-710-80-11 and 5633-712-20-11)

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 128.96 135.96 142.96 146.74 150,.2

TOLERANCE Indicator 5633-710-80-l 1 r 0.38 zk 0.38 2 0.38 -c 0.34 -c 0.34

in Hz
Indicator 5633-712-20-l 1 z!z 0.30 3~ 0.30 f 0.30 + 0.27 2 0.27

Displayed value “101.7 I’ (Indicator P/N 5633-71 l-80-10)

SCALE MARK -10 -5 0 3 5

FREQUENCY in Hz 127.24 134.85 142.46 146.41 149.15

TOLERANCE in Hz f 0.41 -t 0.41 + 0.34 * 0.37 +- 0.37

I Table A2 : when displayed value is “102.2” or “101.8” (depending on the indicator)

- With the help of the sinewave generator, align the pointer with the scale marks in the table and check
that in each case the frequency is within the indicated tolerances :

Displayed value “102.2’ (Indicators P/N 5633-710-80-l 1 and 5633-712-20-l 1)

I

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 129.10 136.10 143.10 146.81 150.52

TOLERANCE Indicator 5633-710-80-l 1 + 0.38 + 0.38 z!z 0.38 & 0.34 2 0.34
in Hz
Indicator 5633-712-20-l 1 rf: 0.30 2 0.30 & 0.30 + 0.27 + 0.27

77-I 9-86
Page 104
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
Displayed value “101.8” (Indicator P/N 5633-711-80-10)

SCALE MARK -10 -5 0 3 5

FREQUENCY in Hz 127.39 135.00 142.60 146.50 149.18

TOLERANCE in Hz f 0.41 + 0.41 f 0.34 + 0.36 -c 0.36

- Set selector switch C3 to position 2.

- Adjust R to 1872 S2 (49 “C)

- Press the ‘TEST” pushbutton on the indicator and note the second value displayed on the LCD. Refer
to Table Bl or B2 below, according to the value displayed.

Table Bl : when displayed value is “102.2” or “100.7 (depending on the indicator)

- With the help of the sinewave generator, align the pointer with the scale marks in the table and check
that in each case the frequency is within the indicated tolerances :

Displayed value “102.2’ (Indicators P/N 5633-71O-80-11 and 5633-712-20-l 1)

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 127.56 134.56 141.56 146.04 150.52

TOLERANCE Indicator 5633-710-80-l 1 zt 0.38 rt 0.38 2 0.38 2 0.41 2 0.41

in Hz
Indicator 5633-712-20-l 1 2 0.30 r 0.30 & 0.30 2 0.33 + 0.33

Displayed value “100.7 ” (Indicator P/N 5633-71 l-80-10)

SCALE MARK -10 -5 0 3 5

FREQUENCY in Hz 125.84 133.45 141.06 145.47 148.83

TOLERANCE in Hz 2 0.41 + 0.41 + 0.34 -r- 0.45 Ifr 0.45

77-19-86
Page 105
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

I Table 82 : when displayed value is “101.2” or “100.8” (depending indicator)

- With the help of the sinewave generator, align the pointer with the scale marks in the table and check
that in each case the frequency is within the indicated tolerances :

Displayed value “101.2” (Indicators P/N 5633-710-80-11 and 5633-712-20-11)

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 127.70 134.70 141.70 146.11 150.52

TOLERANCE Indicator 5633-710-80-l 1 + 0.38 k 0.38 2 0.38 2 0.40 -t 0.40

in Hz
Indicator 5633-712-20-l 1 + 0.30 2 0.30 -c 0.30 k 0.32 + 0.32

Displayed value “100.8 I’ (Indicator P/N 5633-71 l-80-10)

SCALE MARK -10 -5 0 3 5

FREQUENCY in Hz 125.98 133.59 141.20 145.57 148.86

TOLERANCE in Hz + 0.41 2 0.41 & 0.34 + 0.44 + 0.44

- Adjust R to 48535 Q (- 20 “C).

- Place the indicator in the vacuum chamber and adjust chamber pressure to 526 mbar ( + 10 mbar)
(17,000 feet).
- With the help of the sinewave generator, align the pointer with the scale marks defined in the following
table and check that in each case the frequency is within the indicated tolerances :

Indicator 5633-710-80-l 1

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 128.12 135.12 142.12 146.32 150.52

TOLERANCE in Hz 5~ 0.38

77-19-86
Page 106
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Indicator 5633-712-20-l 1

SCALE MARK -10 -5 0 3 6

FREQUENCY in Hz 128.12 135.12 142.12 147.72 151.45

TOLERANCE in Hz + 0.30

Indicator P/N 5633-711-80-10

SCALE MARK -10 -5 0 3 5

FREQUENCY in Hz 126.40 134.02 141.62 145.85 148.96

TOLERANCE in Hz f 0.41 z!z 0.41 rt 0.34 + 0.42 t 0.42

F. Checking accuracy of digital display

- Adjust R to 5000 52.

- Set selector switch C3 to position 1.
- With the help of the sinewave generator, drive the digital display to the readings shown in the following
table and check that in each case the frequency is within the indicated tolerances :

READING 1 10 / 50 / 100 1 150 1 190

1 14.28 1 70.29 / 140.30 1 210.31 1266.31

FREQUENCY NOMINAL 14.00 70.01 140.02 210.03 266.03

en HZ
MINI. 13.72 69.73 lag.74 209.x 26~75

G. Checking accuracy of AIDS output

- Set selector switch C3 to position 2.

- Adjust R to 5000 s1.

77-19-86
Page 107
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
- Adjust the generator frequency to agree with the points in the following table and check that in each
case the AIDS output voltage is within the indicated tolerances :

SCALE MARK 14.00 74.21 148.42 210.03

VOLTAGE in V 0.472 2.500 5.000 5.000

indicator 5633-710-80-l 1 + 75
TOLERANCE
in mV Indicator 5633-711-80-l0
f 60
Indicator 5633-712-20-l 1

H. Checking flag action

- Switch on the power supplies (Ul) and (U2).

- Close switch SW4 and check that flag appears.
- Open switch SW4 and check that flag returns to initial position.

I. Checking “Test” function

- Adjust R to 5000 51.

- Set selector switch C2 to “1” and push the ‘TEST” pushbutton on the front panel.
- Check that the following sequence occurs :
- lighting of all the segments of the LCD and of the decimal point for approximately 1 second. Also
check that pointer moves to “0” scale mark,
- displaying of “-LH” for approximately 2 seconds,
- displaying of “102.3” or “102.4” or “101.8” (depending on the indicator) value for about 3 seconds.
- Set selector switch C2 to “2” and push the ‘TEST” pushbutton on the front panel.

- Check that the following sequence occurs :

- lighting of all the segments of the LCD and of the decimal point for approximately 1 second. Also
check that pointer moves to “0” scale mark,
- displaying of ‘- - -‘I for approximately 2 seconds,
- displaying of “102.1” or “102.2 or (“101.7” or “101.8”) (depending on the indicator) value for about 3
I seconds.
- Set selector switch C2 to “3” and push the ‘TEST” pushbutton on the front panel.

77-l 9-86
Page 108
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
- Check that the following sequence occurs :
- lighting of all the segments of the LCD and of the decimal point for approximately 1 second. Also
check that pointer moves to “0” scale mark,
- displaying of ‘I_LL”for approximately 2 seconds,
- displaying of “101.1” or “101.2” or (“100.7” or “100.8”)(depending on the indicator) value for about 3
seconds.

I J. Checking flashing of displays (indicators P/N 5633-711-80-10 and 5633-712-20-11)

- Adjust R to 5000 Q.
- Switch on the sinewave generator and adjust its frequency to 145 Hz.
- Close switch SW3 and check that displays flash.
- Open switch SW3

I K. Checking “NORM/DIM” control (indicators P/N 5633-710-80-l 1 and 5633-71 l-8GlO))

- Resume initial test conditions (see Para. A above).

- Adjust the power supply U2 to 14 V and check that the LCD lighting becomes slightly dimmer.

I L. Checking the “NORM/DIM/JVN” lighting control (indicator P/N 56337t2-20-11)

- Resume initial conditions (see Para. A above).

- Adjust power supply U2 to 14 V, then to 9 V, and check that the LCD lighting slightly dims.

I M. Checking operation under extreme voltage

- Resume initial conditions 5 (see Para. A above).

- Adjust power supply Ul to 12 V and check that the accuracy of the LCD is unaffected (repeat test F).

NOTE : Failure of pointer to operate and dimming of the LCD are tolerated.

77-19-86
Page 109
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
N. Checking logic outputs

- Resume initial conditions (see para. A)

- Press the ‘TEST” pushbutton on the indicator and note the second value displayed on the LCD. Refer
to Table Cl or C2 below, according to the value displayed.

Table Cl : when displayed value is “102.1” or “101.7” (depending on the indicator)

- Adjust the sinewave generator (G) to the thresholds defined in the table below (check the tolerances)
and check that the indicator lights Ll, L2 and L3 light up (“1”) or go out (“0”) as indicated in each case.

Displayed value “102.1” (Indicator P/N 5633-710-80-11)

I THRESHOLD 3 1 2
I
(G) NOMINAL 138.06 143.52 144.08
in Hz 137.78 138.32 143.24 1 143.80 143.80 1 144.36 rI
Ll 0 0 0 1 1 1
L2 0 0 0 0 0 1

I 0 I l I l I l I l I 1 I

Displayed value “102.1” (Indicator P/N 5633-712-20-l 1)

I THRESHOLD
I
3 1 2

(G) NOMINAL 138.06 143.52 144.08

in Hz
137.50 138.62 142.96 144.08 143.52 144.64

Ll 0 0 0 0 0 1
is? 0 0 0 1 1 1

L3 0 1 1 1 1 1

774 9-86
Page 110
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Displayed value “101.7’ (Indicator P/N 5633-71 l-80-10)

I THRESHOLD
I
1 2

(G) NOMINAL 137.50 142.96 143.52

in Hz 137.21 137.78 142.68 143.24 143.24 143.80

Ll 0 0 0 1 1 1

L2 0 0 0 0 0 1

l-3 0 1 1 1 1 1

Table C2 : when displayed value is “102.2” or “101.8” (depending on the indicator)

- Adjust the sinewave generator (G) to the thresholds defined in the table below (check the tolerances)
and check that the indicator lights Ll, I2 and L3 light up (“1”) or go out (“0”) as indicated in each case.

Displayed value “102.2” (Indicator P/N 5633-710-80-l 1)

77-19-86
Page 111
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Displayed value “102.2” (Indicator P/N 5633-712-20-l 1)

Displayed value “101.8” (Indicator P/N 5633-711-80-10)

THRESCHOL 3 1 2

(G) NOMINAL 137.63 143.10 143.68

in Hz
137.35 137.91 142.82 143.38 143.38 143.94

Ll 0 0 0 1 1 1

L2 0 0 0 0 0 1

L3 0 1 1 1 1 1

3- SElTlNGS AND ADJUSTMENTS

(1) Setting up
- Remove the indicator case (refer to Disassembly section).
- Connect the circuit shown in figure 101.

(2) Zeroing the analogue display (pointer)

Indicators PIN 5633-710-80-11 and 5633-712-20-11

- Switch ON the indicator.
- Adjust R to 5000 Cl.
- Set the frequency of the sinewave generator to 100 Hz and switch on the generator.

77-19-86
Page 112R
FEB 28194
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
- With the help of the potentiometer Pl on the CONDITIONING PCB, drive the indicator pointer to the
electronic downscale stop (below the “-11” scale mark).

Indicator 5633-71l-80- 10
- Determine the atmospheric pressure during the test, using a barometer graduated in mbar.
case 1 P < 1013 mbar +O/-10
case2 P > 1013 mbar +10/-O
- Switch on the indicator.
- Adjust R to 6300 51
- Set the frequency of the sinewave generator as follows :
case 1 = 127.247 Hz
case 2 = 127.387 Hz
- Switch on the generator.
- Using the potentiometer Pl on the CONDITIONING PCB, drive the indicator pointer to the - 10 scale
mark.

(3) Setting pointer’s maximum deflection (Span)

I Indicators PIN 5633-710-80-11 and 5633-712-20-11

- Switch ON the indicator.
- Adjust R to 5000 51.
- Set the frequency of the sinewave generator to 155 Hz and switch on the generator.
- With the help of potentiometer P2 on the CONDITIONING PCB, align the indicator pointer with the
upper most scale mark.

lndica teur 5633-71l-80- 10

- Mesure the atmospheric pressure (case 1 P c 1013 mbar, case 2 P > 1013 mbar).
- Switch on the indicator.
- Adjust R to 6300 Q
- Set the frequency of the sinewave generator as follows according to the atmospheric pressure :
case 1 = 148.67 Hz
case 2 = 148.63 Hz
- Switch ON the indicator.
- Using the potentiometer P2 on the CONDITIONING PCB, drive the indicator ponter to the + 6 scale
mark.

(4) Adjusting “NORM/DIM/JVN” lighting intensity

- Swith ON the indicator.

77-I 9-86
Page 113
JUN 30192
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
- Adjust R to 5000 Q.
- Adjust U2 to 28 V and set selector switch SW2 to “1”.
- Set the frequency of the sinewave generator to 142.12 Hz and switch on the generator.
- With the help of potentiometer Pl on the LIGHTING SMOOTHING PCB, adjust the maximum
brightness (NORM) of the LCD.
- Adjust U2 to 14 V.
- Using potentiometer P2 on the LIGHTING SMOOTHING PCB, adjust the minimum brightness (DIM)
of the LCD.

4- FAULT ISOLATION

MALFUNCTION CAUSES REMEDY

Pointer remains permanently at Power supply failure Check 28 V mains. Check

downscale mechanical stop. voltages supplied by
Digital display inoperative POWER SUPPLY PCB
Replace POWER SUPPLY
PCB

CONNECTOR PCB defective Replace SWITCH PCB

(indicator P/N 5633-710-80-l 1 only)

Pointer is at electronic downscale Loss of NG input digital or input Perform check of pointer
stop.Digital display reads “0” signal incorrect deflection

NG signal reception incorrect Replace

CONDITIONING PCB

NG signal processing incorrect Replace

MICROPROCESSOR PCE

Pointer sticks or stays permanently Defective pointer motor Replace pointer motor
at downscale stop.
Digital display OK
Defective pointer motor control Check servometer control
voltage. Replace CONDI-
TIONING PCB, as requires

77-l 9-86
Page 114
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

MALFUNCTION CAUSES REMEDY

Analog display incoherent Defective analog display control Replace

MICROPROCESSOR PCB

Analog or digital display Defective temperature sensor Check sensor

inaccurate
Defective pressure sensor Replace sensor

Incorrect signal processing Replace CONDITIONNIN~

PCB or
MICROPROCESSOR PCB

Positions of stops incorrect Incorrect adjustment of Check settings of

CONDITIONING PCB CONDITIONING PCB

AIDS output inaccurate Faulty processing Replace CONDITIONING

PCB or
MICROPROCESSOR PCB

STOR outputs incorrect Faulty processing Replace CONDITIONING

PCB or

MICROPROCESSOR PCB
Flashing control inoperative Faulty processing Replace CONDITIONING
PCB or
MICROPROCESSOR PCB

Flag not activated or stuck Defective control of flag Replace CONDITIONING

galvanometer PCB or
MICROPROCESSOR PCB

Defective flag galvanometer Replace flag galvanometel

Built-in test inactive Defective test pushbutton Replace pushbutton

Incorrect processing Replace

MICROPROCESSOR PCB

LCD not illuminated Incorrect lighting voltage Replace LIGHTING

SMOOTHING PCB

Defective lighting circuit Replace lighting circuit

Defective CONNECTOR PCB Replace

(indicator 5633-710-80-l 1 only) CONNECTOR PCB

77-I 9-86
Page 115
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

MALFUNCTION CAUSES REMEDY

Dial and pointer not illuminated Defective CONNECTOR PCB Replace

(Indicator P/N 5633-710-80-l 1) CONNECTOR PCB

Defective dial lighting circuit Replace

I Pointer not illuminated (Indicator

P/N 5633-710-80-l 1)
Pointer lighting circuit devective Replace

77-l 9-86
Page 116
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

DISASSEMBLY

1 - REMOVING THE CASE (60) (Fig. 1 of IPL)

- Remove the test pushbutton (40) after loosening the grub screw (50).

- Remove the fastening screws (70) and extract the case (60), which should slide easily.

2 - REMOVING THE LIGHTING SMOOTHING PCB (80) (Fig. 1 of IPL)

- Remove the case (60) as per Para. 1 above.

- Referring to the interconnection diagram, desolder the connections between the LIGHTING
SMOOTHING PCB, the filter holder plate and circuit.
- Remove the LIGHTING SMOOTHING PCB (80), attached by four screws (90) and four washers (100).

3- REMOVING THE POWER SUPPLY PCB (110) (Fig. 1 of IPL)

- Remove the case (60) as per Para. 1 above.

- Remove the LIGHTING SMOOTHING PCB (80) as per Para 2 above.

- Disconnect the connector JO from the POWER SUPPLY PCB (110).
- Referring to the interconnection diagram, desolder the connections between the POWER SUPPLY PCB
and the filter-holder plate.
- Remove the POWER SUPPLY PCB (100) attached with the four standoffs (120) the two screws (130)
and the two washers (140).

4 - REMOVING THE ALTITUDE SENSOR (150) (Fig. 1 of IPL)

- Remove the case (60) as per Para. 1 above.

- Remove the altitude sensor (150) attached to the CONDITIONING PCB (160).

5 - REMOVING THE CONDITIONING PCB (160) (Fig. 1 of IPL)

- Remove the case (60) as per Para. 1 above.

- Disconnect the connector JOfrom the board.
- Desolderthe connections between the CONDITIONING PCB (160) and the filter-holder plate, the “pointer”
servometer and the “flag” galvanometer (refer to interconnection diagram).
- Remove the CONDITIONING PCB (140) attached by four screws (170) and the four washers (180).

77-I 9-86
Page 301
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

6 - REMOVING THE MICROPROCESSOR PCB (340) (Fig. 1 of IPL)

- Take out the CONDITIONING PCB (160) as per Para. 5 above.

- Remove the insulation (190).
- Disconnect the connectors JO1 and JO2from the MICROPROCESSOR PCB (340).

- Desolder the connections between the MICROPROCESSOR PCB and the test pushbutton (2 wires) and
LCD circuit (flexible wiring), referring to the interconnection diagram.
- Unscrew the four standoffs (260) the two screws (230) and the two washers (246) take out the
MICROPROCESSOR PCB (340).

7 - REMOVING THE LCD CIRCUIT (320) AND THE LCD LIGHTING ASSEMBLY (270) (Fig. 1 of IPL)

- Remove the MICROPROCESSORPCB (349) as per Para. 6 above.

- Unscrew the two bolts (250) and remove the LCD circuit (320).
- On the LCD circuit (320) desolder the LCD lighting assembly (270), secured by the clips (300).

8 - REMOVING THE FILTER-HOLDER PLATE (500) (Fig. 1 of IPL)

- Remove the LIGHTING SMOOTHING PCB (69) (see Para. 2) the POWER SUPPLY PCB (110) (see
Para. 3), the CONDITIONING PCB (160) (see Para. 5) and the MICROPROCESSOR PCB (340) (see
Para. 6).
- Remove the two screws (370) and pull away the base asembly (369). f

- Desolder the filter-holder plate (500) connections to the input connector (refer to interconnection
diagram).

9 - REMOVING RHE CONNECTOR PCB ASSEMBLY (380) (Fig. 1 of IPL)

- Remove the case (69) as per Para. 1.

- Unscrew the two screws (370) and free the intermediate base assembly (369).
- Unscrew the two nuts (399) and free the connector PCB assembly (369).

- Desolder the connector PCB (360) leads to the input connector and to the filter-holder plate (500) (refer
to Interconnection Diagram).

10 - REMOVING THE CONNECTOR PCB (380) (Fig. 1 of IPL)

- Remove the connector PCB assembly (369) as per Para. 9.
- Unscrew bolts (446 and 450), remove the nuts (469) and washers (470).

77-l 9-86
Page 302
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-60-l 1

- Label and desolder the CONNECTOR leads.

- Remove the connector (430) and gasket (480).

11 - REMOVING THE DIAL PLATE (30) (Fig. 2 of IPL)

- Remove the case as per Para. 1 above.

- Slightly loosen the set screw (20) securing the pointer (10) in the hub (320). This can be done through
the openings provided in the body assembly (460).
- Extract the pointer (10).
- Remove the four bolts (40) and nuts (50) and remove the dial plate (30).

12 - REMOVING THE PUSHBUlTON SWITCH (60) (Fig. 2 of IPL)

- Remove the case as per Para. 1 above.

- Desolder the two pushbutton switch (60) leads (refer to Interconnection Diagram).
- Unscrew the switch (60).

13 -REMOVING THE DIAL LIGHTING ASSEMBLY(60) (Fig. 2 of IPL)

- Remove the pushbutton switch (60) as per Para 12.

- Unscrew the bolts (80) and nuts (90) and free the lighting circuit assembly (70).

- Desolder the leads of the dial lighting circuit assembly (70) (refer to Interconnection Diagram).

14 -REMOVING THE PONTER LIGHTING ASSEMBLY (160) (Fig. 2 of IPL)

- Remove the dial plate (30) as per Para 11 above.

- Remove the dial lighting circuit assembly (70) as per Para. 13.
- Unscrew the two screws (170) and remove the pointer lighting assembly (160).

15 - REMOVING THE FLAG GALVANOMETER (230) (Fig. 2 of IPL)

- Remove the dial plate (30) as per Para. 11 above.

- Desolder the flag galvanometer (230) leads (refer to interconnection diagram).

- Unscrew the screw (240) save the spring washer (250) and take out the flag galvanometer (230).

77-19-86
Page 303
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

16 - REMOVING THE POINTER SERVOMETER (350) (Fig. 2 of IPL)

- Remove the LIGHTING SMOOTHING PCB, THE POWER SUPPLY PCB, the CONDITIONING PCB and
the MICROPROCESSOR PCB (see Paras. 2,3,5 and 6).
- Remove the two clips (360), secured by screws (370).
- Take out the pointer servometer (350).

17 - REMOVING THE MULTIPLIER (380) (Fig. 2 of IPL)

- Remove the pointer servometer (see Para. 16).

- Unscrew and remove screw (300), two screws (310) and washers (175 and 185).
- Extract the multiplier (380) from the body (460) and remove the hub (320) after having unscrewed the
screw (330).

18 - REMOVING THE TEST PUSHBUTTON PLUNGER (270) (Fig. 2 of IPL)

- Remove the case as per Para. 1 above.

- Hold the top of the test plunger (270) and remove the circlip (260).
- Extract the test pushbutton plunger (270) and the spring (280).

19 - REMOVING DIFFUSER ASSEMBLY (390) AND LCD (430) (Fig. 2 of IPL)

- Remove the LCD circuit (see Para. 7).

- Remove the two standoffs (400).
- Take out the LCD diffuser assembly (390), the stax (420) the LCD (430), the seal (440) and the shim
(315).

77-19-86
Page 304
FEB 28194
 0 SEXTANT
COMPbNENTMAINTENANCE MANUAL
5633-710-80-11

CLEANING

NOTE: Equivalent substitutes can be used.

A non-exhaustive list of substitutes can be found in the STANDARD
PRACTICES Manual ATA No.Z-09-04.

1. Unpainted Mechanical Parts

Clean all unpainted parts in trichloroethane with the aid of a soft brush.

Dry the parts with dry, clean compressed air.

2. Painted mechanical Parts

Dust off painted parts with dry, clean compressed air.

CAUTION : DO NOT USE ANY CLEANING PRODUCTOR SOLVENT.

3. Electrical Parts

Dust off electrical parts in dust-free air, using dry, clean compressed air.

4. Glass

Clean dial glass with a soft lint-free cloth.

77-l 9186A
0 THOMSON-CSF SEXTANT 2000. Page 401
This document and any data included are the property of THOMSON-CSF SEXTANT They
cannot be reproduced, disclosed or utilized without the company’s prior written approval APR 28/00
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

CHECK

1 - MECHANICAL PARTS

Visually inspect all mechanical parts for any deformations or undue wear.

Check that all parts are free from corrosion.

Check the condition of all inner and outer threads (spacers, base, fastening screws, etc.)

Carefully examine the servometer and the flag galvanometer for defects or damage.

Check that the adhesive nameplate is present and in good condition.

Visually inspect the electrical connector and check that pins are correctly labelled.

2 - NON METAL PARTS

Check the dial glass, the PC boards and other nonmetal parts for scratches, nicks or cracks.

Inspect all painted areas and the dial markings for scratches, peeling or other damage.

3 - ELECTRICAL PARTS

Visually inspect the conductors and solder connections for damage.

Check the condition of electrical components soldered to the PC boards.

77-I 9-86
Page 501I502
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

REPAIR

No repairs are possible at component level.

Failed components must be replaced.

77-19-86
Page 601/602
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

ASSEMBLY (Including storage)

l- ASSEMBLY

A. Installing the diffuser assembly (390) and the LCD (430) (Fig. 2 of IPL)

I
- Fit the seal (440) the shim (315) the LCD display (430) the stax (420) and the LCD diffuser assembly
(390) with the help of the two standoffs (400).

B. Installing the test pushbutton plunger (270) (Fig. 2 of IPL)

- Put in place the plunger (270) and the spring (280).

- Hold the top of the plunger (270) and install the circlip (260).

C. Installing the multiplier (380) (Fig. 2 of IPL)

- Secure the hub (320) to the mutiplier shaft with the help of the screw (330).
- Engage the multiplier (380) in the body (460) and attach it with one screw (300), two screws (310) and
the washers (175 and 185).

D. Installing the pointer servometer (350) (Fig. 2 or IPL)

- Push the nose of the servometer into the multiplier.

- Install the two clips (360) with the help of the screws (370).
- Check that there is no sticking by turning the gears of the multiplier anti-clockwise.

In case of sticking, loosen the two clips and pivot the servometer 180”. Re-tighten the two clips and check
smoothness of rotation again.

E. Installing the flag galvanometer (230) (Fig 2 of IPL)

- Put in place the flag galvanometer and secure lt with the screw (240) and spring washer (250).

F. Installing the pointer lighting assembly (160) (Fig. 2 of IPL)

- Solder the leads from the pointer lighting assembly (160) to the dial lighting assembly (70) (refer to
Interconnection Diagram).
- Attach the pointer lighting assembly (160) by means of the screws (170).

77-19-86
Page 701
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-l 1
G. Installing the dial lighting assembly (70) (Fig. 2 of IPL)

- Solder the connections of the dial lighting assembly (70) with the pointer lighting assembly and the
“LIGHTING SMOOTHING” PCB (refer to Interconnection Diagram).
- Attach the dial lighting assembly (70) by means of the bolts (80) and nuts (90).

H. Installing the pushbutton switch (80) (Fig. 2 of IPL)

- Screw the switch (60) into its housing.

I. Installing the dial plate (30) and the pointer (10) (Fig. 2 of IPL)

- Put in place the dial plate and attach it with the four bolts (40) and nuts (50).
Place the hub (400) such that the screw (20) will be accessible through the openings in the body assembly
- Pw
- Engage the pointer (10) in the hub (190) and attach it such that it will point slightly below the “-11” scale
mark when it is at lts downscale mechanical stop.

J. Installing the connector (430) ( Fig. 1 of IPL)

- Match up and solder the connector leads.

- Place the gasket (480) and the connector (430) on the indicator base (490).
- Fasten the connector to the base (490) with the bolts (440 and 450) the washers (470) and nuts (450).

K. Installing the connector PCB assembly (380) (Fig. 1 of IPL)

- Solder the connections between the connector PCB assembly (380), the input connector and the
filter-holder plate (refer to Interconnection Diagram).
- Attach the connector PCB assembly (380) by means of the nuts (390).

L. Installing the filter-holder plate (500) (Fig. 1 of IPL)

- Solder the filter-holder plate (500) leads to the connector (refer to interconnection diagram).
- Attach the filter-holder plate to the base assembly (360) with two screws (370).
- Attach the filter-holder plate to the intermediate base assembly with the two screws (370).

M. Installing the LCD circuit (320) and the LCD lighting assembly (270) (Fig. 1 of IPL)

- Solder the LCD lighting assembly (270) to the LCD circuit (320) and fasten it with the clips (300).
- Attach the LCD circuit with two screws (250).

77-I 9-86
Page 702
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

N. Installing the MICROPROCESSOR PCB (340) (Fig. 1 of IPL)

- Fasten the MICROPROCESSORPCB with the four standoffs (269) two screws (230) and two washers
c3w
- Solder the connections betwen the MICROPROCESSOR PCB, the test pushbutton (2 wires) and the LCD
circuit (flexible wiring) (refer to Interconnection Diagram).
- Connect the connectors JO1and JO2 of the MICROPROCESSOR PCB (349).
- Put on the insulating sheet (190).

0. Installing the CONDITIONING PCB (160) (Fig. 1 of IPL)

- Attach the CONDITIONING PCB with the four screws (170) and the four washers (180).
- Solder the connections between the CONDITIONING PCB (150) and the filter-holder plate, the pointer
servometer and the flag galvanometer (refer to Interconnection Diagram).
- Connect the PCB’s connector JO.

P. Installing the Altitude Sensor (150)-(Fig. 1 of IPL)

- Install the altitude sensor (150) on the CONDITIONING PCB (169).

Q. Installing the POWER SUPPLY PCB (110) (Fig. 1 of IPL)

- Secure the POWER SUPPLY PCB with the standoffs (120) the two screws (130) and the two washers
(1W
- Referringto interconnection diagram, solder the POWER SUPPLY PCB connections with the filter-holder
plate.
- Connect the POWER SUPPLY PCB (110) connector JO.

R. Installing the LIGHTING SMOOTHING PCB (80) (Fig. 1 of IPL)

- Secure the LIGHTING SMOOTHING PCB (89) with four screws (90) and the four washers (100).
- Referring to interconnection diagram, solder the LIGHTING SMOOTHING PCB connections with the
filter-holder plate and the LCD circuit .

S. Installing the case (60) (Fig. 1 of IPL)

- Fit on the case and fasten it with seven screws (70).

- Install the test pushbutton (49) and fasten it with the grub screw (50).

77-l 9-86
Page 703
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5533-710-80-l 1

2 - STORAGE

A. Packing

This indicator must be packed individually in a shockproff cardboard box and chocked with foam packing.

Packing for tropical countries should comply with ATA 300 IIIA.

The equipment’s identification must be clearly visible.

B. Storage

The indicator should be stored in its original packaging in dry, dust-free premises.

Do not store near batteries or other equipment that might release corrosive vapours.

77-19-86
Page 704
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5533-710-80-l 1

ILLUSTRATED PARTS LIST

INTRODUCTION

l- GENERAL

The Illustrated Parts List (IPL) is prepared in compliance with ATA 100.The IPL is intended to identify all the
components of the unit.

The Illustrated Parts List contains the following sections :

- Introduction,

Vendors Code List,

- List of Circuit symbols (if applicable),
- Alphanumerical Index of Manufacturer’s Part Numbers,
- Detailed Parts List.

2 - HOW TO USE DETAILED PARTS LIST

The Detailed Parts List includes the nomenclature and illustrations of the unit components.

The Detailed Parts List columns are arranged as follows :

- 1st column : Fig. Item - Figure and Item number
- 2nd column : Part number - Manufacturer’s part number
- 3rd column : Nomenclature
- 4th column
: Usagecode - Effectivity
- 5th column

A eFigure and Item numbers

The figure number, covering items listed, is indicated on the first line at the top of each page.

Each part-numbered assembly, sub-assembly or item listed in the parts list is assigned an item number
followed by a letter identifying the variant. The basic variant is lettered A.

Assemblies, sub-assemblies and parts listed, but not illustrated, are identified by a dash (-) preceding the
corresponding item numbers.

A “lettered index” appearing before the item number is across reference to the illustration of the variant
called out from the corresponding main figure.

77-l g-8644
Page 1001
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

B. Manufacturer’s part number

Each of the assemblies, sub-assemblies and detail parts, illustrated or not, is assigned a manufacturer’s
part number.

When the manufacturer’s actual part number exceeds 15 characters, an equivalent assigned part number
is listed in the “Part Number” column preceded by the following annotation :

ORDER OVERLGTH...MADE BY V...

Both part numbers are listed in the Alphanumeric Index in their logical order ; the actual overlength part
number is cross-referenced to the assigned part number preceded by the annotation : “SEE...“.

C. Nomenclature

The nomenclature is indented to show the relationship between the parts listed, as follows :
1234567

Assembly
Detail parts for assembly
Sub-assembly
Attaching parts and/or storage parts for sub-assembly
* * *

. . Detail parts for sub-assembly

. . Sub-sub-assembly
. . Attaching parts and/or storage parts for sub-sub-assemnbly
* * *

. . . Detail parts for sub-sub-assembly

etc.

A vendor code is indicated for all items or articles not made by the prime manufacturer of the assembly.

This vendor code or the abbreviation “NP” (non procurable) is placed at the extreme right-hand side of the
1st line of the nomenclature.

D. Effectivity (Usage Code)

An alphanumerical usage code indicates the applicability of sub-assemblies and detail parts to the next
higher assembly (ies) or sub-assembly (ies).

When the applicability is general, the usage code column is left blank.

The usage code corresponds to the figure/item number of the next higher assembly (ies) or sub-assembly
(ies). e.g., effectivity 1A, lB, 1C is written 1ABC.

77-19-86A
Page 1002
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5533-710-80-l 1

E . Units per assembly

The Units per Assy column shows the number of units required for the next higher assembly.

In some cases, this information is replaced by the letters REF (reference) or AR (as required).

3 - TERMS AND ABBREVIATIONS USED

- AR : required
- ATTACHING PARTS
- DELETED
-DET : Detail
- LH and RH : Left and right
- MADE BY
- MADE FROM
- MATCHED PART
- MODIFIED FROM
- NHA : Next higher assembly
- NP : Non procurable
- OPTTO : Optional parts
- ORDER OVERLGTHMPN : Actual part number exceeding 15 characters
- OVERSIZE : Oversize repair parts
- POST SB : After applying Service Bulletin instructions
-R : Modified
; I!
iit - RF : For reference
jif - SEE
sg - SEL FROM : Select from parts
fat
$ a - STORAGEPARTS
5f&$ - SUPSD BY : Superseded by
*8a
[ii - SUPSDS : Supersedes
I - UNDERSIZE : Undersize repair parts

4- UPDATING

When an item is revised, added or deleted, the letter “R” is shown in the RH margin (the page date of issue
changes).

The letter “R” appears in the RH margin opposite the page number when all the item numbers are changed.

77-l 9-86A
Page 1003
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

5 - LISTOF MANUFACTURERS

CODE NAMES - ADDRESSES

FB185 N.I.C. (NEGOCIATION INDUSTRIELLESET COMMERCIALES

7 rue des Oziers - 95310 ST OUEN L’AUMONE FRANCE

FOllO AFNOR (ASSOCIATION FRANCAISEDE NORMALISATION)

Tour Europe - 92080 PARISLA DEFENSE CEDEX 7 FRANCE

F0114 U.T.E (UNION TECHNIQUE DE CELECTRICITE)

lmmeuble Lavoisier
4 place des Vosges - LA DEFENSE 5
92000 COURBEVOIE FRANCE

F0213 MORS - BRION LEROUX SA

2 - 4 rue Isaac Newton - B.P. 90
93152 LE BLANC MESNIL FRANCE

FO350 L.C.C. (CIE EUROPEENNE DE COMPOSANTSELECTRONIQUES)

50 rue Jean Pierre Timbaud - 92400 COURBEVOIE FRANCE

F0862 PHILIPS COMPOSANTS SA

DIV COMPOSANTS PASSIFS ET PRODUITS MAGNETIQUES
4 rue du Port aux vins
92156 SURESNES FRANCE

F1621 SFERNICE
199 Bd de la Madeleine - B.P. 17 - 06021 NICE CEDEX FRANCE

F1983 DEUTSCH (CIE) SA

B. P. 207 - 10 rue Lionel Terray
92502 RUEIL MALMAISON CEDEX ‘FRANCE

F2405 S. E. E. M (STE D’ETUDES ELECTRONIQUESET MECANIQUES)

15 avenue Victor Hugo - B.P. 50 - 92170 VANVES CEDEX FRANCE

F2779 PRONER COMATEL

38 - 40 AL du Closeau - Z.I. Les Richardets
93161 NOISY LE GRAND CEDEX FRANCE

F3754 BAEHNI WILLIAM SA

147 rue Armand Silvestre - 92493 COURBEVOIE FRANCE

77-19-86A
Page 1004
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-l 1
LIST OF MANUFACTURERS (continued)

CODE NAMES - ADDRESSES

F4597 MOTOROLA SEMICONDUCTEUR SA

avenue du General Eisenhower LE MIRAIL
31023 TOULOUSE CEDEX FRANCE

F4620 SIEMENS SA
39,47 Bd Ornano - 93527 SAINT DENIS CEDEX 2 FRANCE

F5449 CECLA SA
SAINT VICTOR DE CESSIEU - 38110 LA TOUR DU PIN FRANCE

F6205 CEPE (CIE D’ELECTRONIQUE ET DE PIEZO-ELECTRICITE) SA

44 avenue de la Glaciere - 95100 ARGENTEUIL FRANCE

F6212 ORBITEC SA
28 rue Fernand Pelloutier - 92110 CLICHY FRANCE

F7507 MORS COMPOSANT ETS APEM

55 Avenue Edouard Herriot - 82300 CAUSSADE FRANCE

F8859 S G S THOMSON MICROELECTRONICS

7 avenue Gallieni - 94253 GENTILLY CEDEX FRANCE

F9293 SODEICO SARL

ZAI des Bruyeres - 2 av. Le Verrier - 78190 TRAPPES FRANCE

s3774 OSHINO ELECTRIC IAMP WORK S LTD

5 - 2 MINAMI SHINAGAM - A 2 CHOME
SHINAGAWA KU -TOKYO JAPON

S5265 PRECIMATION
12 rue de I’Hopital - CH 2501 BIENNE SUISSE

s5339 TOSHIBA SYOUJI

l-l -8 SOTOKANDA GHIYODA KU - TOKYO JAPON

U2338 BERG ELECTRONICS DIVISION DUPONT (UK) LTD

65 High street Tring - HERTFORSHIRE HP 234AD U.K.

77-I g-86:
Page 1005
FEB 28194
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
LIST OF MANUFACTURERS (continued)

CODE NAMES - ADDRESSES

01121 ALLEN-BRADLEY Co
1021 S 2ND ST - MILWAUKEE WI U.S.A

06665 ANALOG DEVICES

1500 Space Park DR - SANTA CLARA CA U.S.A

12294 MURATA ERIE NORTH AMERICA INC

DIV OF MURATA ERIE
5 Fraser Ave - TRENTON ONT CA K8V 5Sl U.S.A

12969 UNITRODE CORP

580 Pleasant St. - WATERTOWN MA U.S.A

15912 THOMAS AND BETTS CORP

ELECTRONICS GROUP
76 FAIRBANKS - IRVINE CA U.S.A

17856 SILICONIX INC

2201 Laurelwood RD - SANTA CLARA CA U.S.A
f
24444 GENERAL SEMICONDUCTOR INDUSTRIES INC
2001 W 1OTHPL - TEMPE AZ U.S.A

27014 NATIONAL SEMICONDUCTOR CORP

2900 SEMICONDUCTOR DR - SANTA CLARA CA U.S.A

33095 SPECTRUM CONTROL INC

World HQ - 6000 W RIDGE RD - ERIE PA U.S.A

54590 RCA CORP DISTRIBUTION AND SPECIAL PRODUCTS

BLDG 206-2 CHERRY HILL OFFICES
CHERRY HILL NJ U.S.A

56289 SPRAGUE ELECTRIC CO

WORLD HQS
267 Lowell RD - HUDSON NH U.S.A

774 9-86
Page 1006
FEB 28194
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
LIST OF MANUFACTURERS (continued)

CODE NAMES - ADDRESSES

58361 GENERAL INSTRUMENT CORP

OPTOELECTRONICS DIV.
3400 Hillview avenue - PALO ALTO - CALIFORNIE 94304 U.S.A.

59730 THOMAS AND BE-I-I-SCORP

HWY 218 S - IOWA CITY IA U.S.A

77-I 9-86
Page 1007/l 008
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PART NUMBER

Cl 3 OlOA MK06G00104K
Cl 4 OlOA CTS13-25VlOMM
Cl 5 OlOA MK05G00104M
Cl 6 030A 46240223000
c2 3 030A 222202118471

c2 4 020A 46240022001
c2 5 020A MK05G00222M
c2 6 030A 46240223000
c3 3 030A 222202118471
c3 4 030A MK05G00104M

c3 5 020A MX05G00222M
c3 6 040A CTS13-25VlOMM
c4 3 040A 222203135151
c4 4 040A CTSl-40VlOMM
c4 5 030A CTS13-25VlOMM

c5 3 050A MK05G00104M
c5 4 030A MK05G00104M
c5 5 030A CTS13-25VlOMM
c5 6 050A MK05G00104M
C6 3 060A 46244703001

C6 4 050A CTS13-50V4M7M
C6 5 040A MK05G00221M
C6 6 050A MK05G00104M
c7 3 050A MK05G00104M
c7 4 OlOA CTS13-25VlOMM

c7 5 020A MK05G00222M
c7 6 050A MK05G00104M
C8 3 050A MK05G00104M
C8 4 OlOA CTS13-25VlOMM
C8 5 050A MK05G00103M

C8 6 060A 46241003103
c9 3 050A MX05G00104M
c9 4 OlOA CTS13-25VlOM.M
c9 5 OlOA MK05G00104M
Cl0 3 070A 222203137101

Cl0 4 OlOA CTS13-25VlOMM

Cl0 5 020A MK05G00222M
Cl1 4 060A 46240102003
Cl1 5 020A MK05G00222M
Cl2 4 060A 46240102003

EDI 1001 Page 1

JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PARTNUMBER

Cl2 5 OlOA MK05G00104M

Cl3 5 030A CTS13-25VlOMM
Cl4 5 020A MK05G00222M
Cl5 5 060A MK06G00105K
Cl6 5 050A MK05G00103M

CR1 3 080A lN4007

CR1 5 070A lN4148
CR1 6 070A lN4148
CR2 3 090A 1,5KE39CP
CR2 4 070A lN5646A

CR2 5 070A lN4148

CR3 3 1OOA lN4934
CR3 4 080A lN5662A
CR3 5 080A BZX55C36
CR4 3 1lOA P6KE33P

CR4 4 080A lN5662A

CR4 5 090A lN6061A
CR5 4 090A BA157
CR5 5 080A BZX55C36
CR6 4 1OOA BZX55C4V7

CR6 5 090A lN6061A

CR7 4 090A BA157
CR7 5 080A BZX55C36
CR8 4 090A BA157
CR8 5 090A lN6061A

CR9 4 090A BA157

CR9 5 070A lN4148
CR10 4 090A BA157
CR10 5 070A lN4148
CR11 4 1lOA BZX55C6V2

CR12 4 120A lN5555A

CR13 4 130A LM336Z-5.0
ICl 3 250A LM339N
ICl 4 350A MC7815CT
ICl 5 390A LF398N

ICl 6 140A MC146805E2P

IC2 3 260A LM358N
IC2 4 380A UC2525AJ
IC2 5 400A LM358N
IC2 6 150A MC74HC373N

- Item not illustrates

77-l 9186
EDI 1001 Page 2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PART NUMBER

IC3 3 270A UA78S4OPC

IC3 4 390A LM358N
IC3 5 410A OPO7CP
IC3 6 OlOA 4805633710
IC3 6 OlOB 4805633712

IC4 3 280A MC7812CT

IC4 4 400A MC7818CT
IC4 5 420A LM339N
IC4 6 160A MC146823P
IC5 4 430A MC7805CT

IC5 5 400A LM358N

IC5 6 170A MC74HClON
IC6 4 460A MCT2
IC6 5 430A AMPOlFX
IC6 6 180A MC14011BCP

IC7 5 440A OP20HZ

IC7 6 190A 47210034000
IC8 5 450A UHP408
IC8 6 200A CD4056BE
IC9 5 460A TLP521-4

IC9 6 200A CD4056BE

IClO 5 470A TLP521-2
IClO 6 200A CD4056BE
ICll 5 390A LF398N
ICll 6 210A CD4054BE

IC12 5 480A MC1455Pl

IC12 6 220A MC14040BCP
IC13 5 490A MC74HC74N
IC13 6 230A DAC1219LCJ
IC14 6 240A OPO7CP
JO 4 490A BDF5871-13
JO 5 500A BDF5871-13
Jl 5 510A 75160-115-08
Jl 6 270A FST22All
J2 5 510A 75160-115-08
J2 6 280A FST22A12
Ll 3 130A 35256
Ll 4 480A 46501038100
L2 3 130A 35256
Pl 3 140A T93ZlOKM

- ttem not illustrates

77-I 9-86
EDI 1001 Page 3
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH lPL
5633-710-80-11
EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PARTNUMBER

Pl 4 140A T93Z2K2M
Pl 5 100A T93Z47KM
P2 3 140A T93ZlOKM
P2 5 1lOA T93Z4K7M
P3 3 140A T93ZlOKM

::: 45 120A
150A BUZ73A
2N5320
4 150A BUZ73A
:i 5 130A 2N5322
43 4 180A 2N5320

5 150A 2N6782
:i 4 220A 2N5322
5 150A 2N6782
:i 5 150A 2N6782
Rl 3 150A RB59-33UJ

Rl 4 240A RB59-33UJ
Rl 5 160A RC21UlOKJ
Rl 6 080A CB1065
R2 3 160A RS58YlOKF
R2 4 250A RS58YlOKF

R2 5 170A RS58Y27K4F
R3 3 160A RS58YlOKF
R3 4 260A RC21UlOKJ
R3 5 180A RS58YlKF
R4 3 170A RC21UlKJ

R4 4 270A RC21UlOUJ
R4 5 190A RS58Y20KF
R4 6 090A RC21UlMJ
R5 3 180A RS58Y5K62F
R5 4 270A RC21UlOUJ

R5 5 200A RS58Y41K2F
R5 6 090A RC21UlMJ
R6 3 190A RS58Y2K05F
R6 4 280A RS58Y16K5F
R6 5 190A RS58Y20KF

R6 6 090A RC21UlMJ
R7 3 190A RS58Y2K05F
R7 4 290A RS58Y6K19F
R7 5 210A RC21U360UJ
R7 6 090A RC21UlMJ

- Item not illustrates

77-l 9-86
EDI 1001 Page 4
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11
EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PART NUMBER

R8 3 200A RS58Y2K21F
R8 4 250A RS58YlOKF
R8 5 220A RS58Y5KllF
R8 6 1OOA RC21UlOOUJ
R9 3 210A RS58YlK69F

R9 4 250A RS58YlOKF
R9 5 230A RS58Y51KlF
R9 6 1OOA RC21UlOOUJ
RlO 3 220A RS58YlKF
RlO 4 250A RS58YlOKF

RlO 5 160A RC21UlOKJ

Rll 3 160A RS58YlOKF
Rll 4 300A RC21UlOOUJ
Rll 5 240A RS58Y2K61F
Rll 6 1lOA RC21UlOKJ

R12 3 230A RS58YlOOKF

R12 4 310A RC21U510UJ
R12 5 250A RC21U20KJ
R12 6 120A RC21U47KJ
R13 3 160A RS58YlOKF

R13 4 320A RS58Y3K83F

R13 5 260A RC21U470KJ r
R14 3 230A RS58YlOOKF
R14 4 330A RS58Y4K12F
R14 5 160A RC21UlOKJ

R15 3 160A RS58YlOKF

R15 4 340A RC21UlKJ
R15 5 270A RC31U150KJ
R16 3 230A RS58YlOOKF
R16 4 340A RC21UlKJ

R16 5 280A RS58Y4K02F

R17 3 160A RS58YlOKF
R17 5 290A RS58Y4K42F
R18 3 160A RS58YlOKF
R18 5 300A RS58P5K49B

R19 3 240A RB59-56UJ

R19 5 310A RS58P5K62B
R20 5 160A RC21UlOKJ
R21 5 320A RC31U4K3J
R22 5 330A RC21U470UJ

774 9-86
EDI 1001 Page 5
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-l 1

EQUIPMENT AIRLINE
DESIGNATOR PART NUMBER FIG ITEM PART NUMBER

R23 5 320A RC31U4K3J

R24 5 330A RC21U470UJ
R25 5 330A RC21U470UJ
R26 5 330A RC21U470UJ
R27 5 340A RS58Y133KF

R28 5 350A RS58Y5K76F

R29 5 360A RCSlUlOKJ
R30 5 370A RC31U4K7J
R31 5 370A RC31U4K7J
R32 5 240A RS58Y2K61F

RX1 5 380A SILlO-9-3K9G

RX1 6 130A SILlO-9-1OKG
Tl 4 470A 46501037100
Yl 6 250A HC18U3276K8000

- Item not illustrated

77-l 9-86
EDI 1001 Page 6
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

AMPOlFX 5 430A 1
BA157 4 090A 5
BDF5871-13 4 490A SB
5 500A SB
BDF5871-13-32 2 130A SB
2 200A SB
BEQlUY030006TDU 1 440A 2
BEQlUY030012TDU 1 450A 2
BUZ73A 4 150A 2
BZX55C36 5 080A 3
BZX55C4V7 4 1OOA 1
BZX55C6V2 4 1lOA 1
CB1065 6 080A 1
CD4054BE 6 210A 1
CD4056BE 6 200A 3
CE13L1BC100V100UK 6 060A 1
SAME AS
46241003103
CE13LlBClOOV22UK 6 030A 2
SAME AS
46240223000
CN31-2Cl-100VlOKM 4 060A 2
SAME AS
46240102003
CN31-2Cl-lOOV2K2M 4 020A 1
SAME AS
46240022001
CN31-2Cl-lOOV470UM 3 060A 1
SAME AS
46244703001
CTSl-40VlOMM 4 040A 1
CTS13-25VlOMM 4 OlOA 5
5 030A 3
6 040A 1
CTS13-50V4M7M 4 050A 1
DAC1219LCJ 6 230A 1
DF80601-14-1700 1 480A 1
FDBA50H14-19PNK 1 430A 1
FST13A25 1 330A 1
FST22All 6 270A 1
FST22A12 6 280A 1
GKQlUY030UF 1 390A 2
1 460A 4
HC18U3276K8000 6 250A 1
H2QlUY016004AF 1 170A 4
1 250A 2
H2QlUY016008AF 2 080A 3
2 310A 2
-t&m not illustrated

77-19-86
NI ALPHA- NUM 1001 Page 1
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

H2QlUY016012AF 2 170A 2
H2QlUY020004AF 1 090A 4
1 130A 2
1 230A 2
H2QlUY020005AF 2 370A 2
H2QlUY020008AF 2 300A 1
H2QlUY025006AF 1 370A 2
4 200A 2
H2QlUY030006AF 3 290A 1
4 160A 2
4 360A 1
4 410A 1
4 440A 1
LF398N 5 390A 2
LM336Z-5.0 4 130A 1
LM339N 3 250A 1
5 420A 1
LM358N 3 260A 1
4 390A 1
5 400A 2
MCT2 4 460A 1
MC14011BCP 6 180A 1
MC14040BCP 6 220A 1
MC1455Pl 5 480A 1
MC146805E2P 6 140A 1
MC146823P 6 160A 1
MC74HClON 6 170A 1
MC74HC373N 6 150A 1
MC74HC74N 5 490A 1
MC7805CT 4 430A 1
MC7812CT 3 280A 1
MC7815CT 4 350A 1
MC7818CT 4 400A 1
MK05G00103M 5 050A 2
MK05G00104M 3 050A 4
4 030A 2
5 OlOA 3
6 050A 3
MK05G00221M 5 040A 1
MK05G00222M 5 020A 6
MK06G00104K 3 OlOA 1
MK06G00105K 5 060A 1
M4UJ030SF 1 470A 4
OL-6839BPE 2 1lOA 2
2 190A 1
OPO7CP 5 410A 1
6 240A 1
OP2OHZ 5 440A 1
- item not illustrated

77-19-86
NI ALPHA- NUM 1001 Page 2 R
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

OR3023 1 290A 2
P6KE33P 3 1lOA 1
RB59-33UJ 3 150A 1
4 240A 1
RB59-56UJ 3 240A 1
RC21UlKJ 3 170A 1
4 340A 2
RCllUlMJ 6 090A 4
RC21UlOKJ 4 260A 1
5 160A 4
6 1lOA 1
RC21UlOUJ 4 270A 2
RC21UlOOUJ 4 300A 1
6 1OOA 2
RC21U20KJ 5 250A 1
RC21U360UJ 5 210A 1
RC21U47KJ 6 120A 1
RC21U470KJ 5 260A 1
RC21U470UJ 5 330A 4
RC21U510UJ 4 310A 1
RC31UlOKJ 5 360A 1
RC31U150KJ 5 270A 1
RC31U4K3J 5 320A 2
RC31U4K7J 5 370A 2
RONDEXAl-7 1 180A 4 R
2 315A 2 R
RS58P5K49B 5 300A 1
RS58P5K62B 5 310A 1
RS58YlKF 3 220A 1
5 180A 1
RS58YlK69F 3 210A 1
RS58YlOKF 3 160A 7
4 250A 4
RS58YlOOKF 3 230A 3
RS58Y133KF 5 340A 1
RS58Y16K5F 4 280A 1
RS58Y2K05F 3 190A 2
RS58Y2K21F 3 200A 1
RS58Y2K61F 5 240A 2
RS58Y20KF 5 190A 2
RS58Y27K4F 5 170A 1
RS58Y3K83F 4 320A 1
RS58Y4K02F 5 280A 1
RS58Y4K12F 4 330A 1
RS58Y4K42F 5 290A 1
RS58Y41K2F 5 200A 1
RS58Y5KllF 5 220A 1
RS58Y5K62F 3 180A 1
-ltem not illustrated

774 9-86
NI ALPHA- NUM 1001 Page 3
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

RS58Y5K76F 5 350A 1
RS58Y51KlF 5 230A 1
RS58Y6K19F 4 290A 1
SCI1150-000 1 520A 2
SILlO-9-1OKG 6 130A 1
SILlO-9-3K9G 5 380A 1
TLP521-2 5 470A 1
TLP521-4 5 460A 1
TY23M 3 020A 2
3 120A 4
T93ZlOKM 3 140A 3
T93Z2K2M 4 140A 1
T93Z4K7M 5 1lOA 1
T93Z47KM 5 1OOA 1
UA78S4OPC 3 270A 1
UC2525AJ 4 380A 1
UHP408 5 450A 1
VTAX020TL 1 1OOA 4
1 140A 2
1 240A 2
2 305A 1 R
VTAX025TL 2 250A 1
XUQlUY016AF 2 050A 4
2 090A 2
XUQlUY030AF 3 300A 1
4 170A 2
4 370A 1
4 420A 1
4 450A 1
1,5KE39CP 3 090A 1
lN4007 1 400A 4
3 080A 1
lN4148 5 070A 4
6 070A 1
lN4934 3 1OOA 1
lN5555A 4 120A 1
lN5646A 4 070A 1
lN5655A 1 510A 1
lN5662A 4 080A 2
lN6061A 5 090A 3
115-91-624-41-003 6 260A 1
SAME AS
47900033000
1214-007 1 530A 14
1622 2 260A 1
2N5320 4 180A 1
5 120A 1
2N5322 4 220A 1
- Item not illustrated

77-I 9-86
NI ALPHA- NUM 1001 Page 4
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

2N5322 5 130A 1
2N6782 5 150A 3
21231162804 2 040A 4
21241162404 1 070A 7
2126016220 2 330A 1 R
21260162206 1 050A 1
2126316220 2 020A 1
21441222481 2 240A 1
222202118471 3 030A 2
222203135151 3 040A 1
222203137101 3 070A 1
241000261 DELETED R
254001750 2 440A 1
31033191 4 230A 1
5 140A 1
35256 3 130A 2
4B2220700 2 400A 2 R
4B4200600 2 435A 1 R
4C70370CT 1 02oc 1 R
4c70373cs 1 020A 1 R
410215 4 190A 1
411013090 4 210A 2
411016470 1 200A 2
411016850 1 210A 2
1 260A 2
41101685101 1 120A 4
411019030 2 140A -1
41101904707 2 320A 1
411019890 2 120A 2
41102066707 2 270A 1
41300779103 2 450A 3
413009131 2 360A 2
413017780 1 490A 1
413018220 1 190A 1
42100501710 2 030A 1
42100501711 2 03oc 1
42100501712 2 030B 1
425004440 4 500A 1
425004450 6 290A 1
425007350 3 310A 1
425007360 5 520A 1
425007370 2 150A 1
425007380 1 320A 1 R
42500738710 1 310A 1
425007400 2 220A 1
425007680 1 410A 1
431000510 2 280A 1
451001741 1 030A 1
- Item not illustrated

77-I 9-86
NI ALPHA- NUM 1001 Page 5
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

451002030 DELETED
45100283712 1 020B 1
46240022001 4 020A 1
SAME AS
CN31-2Cl-lOOV2K2M
46240102003 4 060A 2
SAME AS
CN31-2Cl-100VlOKM
46240223000 6 030A 2
SAME AS
CE13LlBClOOV22UK
46241003103 6 060A 1
SAME AS
CE13L1BC100V100UK
46244703001 3 060A 1
SAME AS
CN31-2Cl-lOOV470UM
46501037100 4 470A 1
46501038100 4 480A 1
467004150 2 210A SB
467005660 2 420A 2 R
46900081006 2 1OOA 2
47210034000 6 190A 1
474001000 2 430A 1
47900033000 6 260A 1
SAME AS
115-91-624-41-003
4805633710 6 OlOA 1
4805633711 6 OlOC 1
4805633712 6 OlOB 1
485000670 1 040A 1
48500067712 1 040B 1
5633-710-80-11 1 -0OlA RF
5633-710-80-11A 1 550A 1
5633-711-80-10 1 -0OlC RF
5633-711-80-10A 1 55oc 1
2 -0OlC RF
5633-712-20-11 1 -0OlB RF
5633-712-20-11A 1 550B 1
2 -0OlB RF
5633-717-80-11A 2 -0OlA RF
75160-115-08 1 300A SB
5 510A SB
75208502105 2 350A 1
75544808700 1 150A 1
75563302707 2 460A 1
75563303707 2 390A 1
75563303711 1 22oc 1
- Item not illustrated

774 9-86
NI ALPHA-NUM 1001 Page 6
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

PART NUMBER AIRLINE FIG ITEM Ttl.

PART NUMBER REQ.

75563303711AA 1 34oc 1
6 -0OlC RF
75563303712 2 390B 1
75563304707 2 230A 1
75563306707 2 -290A 1
75563307710 2 160A 1
75563308710 2 070A 1
75563311710 1 -350A 1
75563312710 1 -420A 1
75563313710 1 500A 1
75563316707 1 270A 1
75563317707 1 160A 1
5 -0OlA RF
75563318707 1 060A 1
75563321710 1 380A 1
75563322710 1 360A 1
75563323712 1 220B 1
75563323712AA 1 340B 1
6 -0OlB RF
75563325707 2 OlOA 1
75563325712 2 OlOB 1
75563327707 1 540A 1
75563330710 1 080A 1
3 -0OlA RF
75563331710 1 220A 1
7556333171OA.A 1 340A 1
6 -0OlA RF
75567820710 2 -340A 1
75567821710 2 380A 1
75567860707 1 1lOA 1
4 -0OlA RF
75567862700 6 -020A 1
79901-60 1 280A 2 R
2 180A 1
9533CD 2 060A 1

- Hem not illustrated

77-19-86
NI ALPHA-NUM 1001 Page 7
FEB 28/94
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

DETAILED PARTS LIST

77-l 9-86
1001 Page l/2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WTH IPL
5633-710-80-11

280

290
270

1;
310

300

340

230

240

330

110

520

160+ 540

360

NG SPEED AND LIMIT DEVIATION INDICATOR

Figure 1
77-l 9-86
Page 1001-O
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

1
-0OlA 5633-710-80-11 NG SPEED AND LIMIT DEVIATION RF
INDICATOR
-0OlB 5633-712-20-11 NG SPEED AND LIMIT DEVIATION RF
INDICATOR
-0OlC 5633-711-80-10 NG SPEED AND LIMIT DEVIATION RF
INDICATOR
OlOA 451002030 .DELETED
020A 4C70373CS .PLATE,IDENTIFICATION 1A 1 R
020B 45100283712 .PLATE,IDENTIFICATION 1B 1
02OC 4C70370CT .PLATE,IDENTIFICATION 1c 1 R
030A 451001741 .PLATE,INSULATING TESTS 1
040A 485000670 .TESTING KNOB 1AC 1
040B 48500067712 .TESTING KNOB 1B 1
ATTACHING PARTS
050A 21260162206 .SETSCREW M1.6X2 1
***
060A 75563318707 .HOUSING ASSY,EQUIPPED 1
ATTACHING PARTS
070A 21241162404 .SCREW F/120 M1.6X4 7
***
080A 75563330710 .LIGHTING-SMOOTHING PCB 1
SEE 77-19-86-03-OOlA FOR DET
ATTACHING PARTS x
090A H2QlUY020004AF .SCREW CLS M2X4 FOllO 4
(21181201042)
1OOA VTAX02OTL .WASHER,SPRING TENSION M2 FOllO 4
(23202212006)
*Jr*
1lOA 75567860707 .POWER SUPPLY PCB 1
SEE 77-19-86-04-OOlA FOR DET
ATTACHING PARTS
120A 41101685101 .COLUMN 4
130A H2QlUY020004AF .SCREW CLS M2X4 FOllO 2
(21181201042)
140A VTAX020TL .WASHER,SPRING TENSION M2 FOllO 2
(23202212006)
***
150A 75544808700 .ALTITUDE SENSOR PCB 1
160A 75563317707 .CONDITIONING PCB 1
SEE 77-19-86-05-OOlA FOR DET
ATTACHING PARTS
170A H2QlUY016004AF .SCREW CLS M1.6X4 FOllO 4
(2118316104)

- ltem not illustrated

77-19-86
Page 1001- 1
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

180A RONDEXAl-7 .WASHER,SPRING TENSION Ml.7 FB185 4

(CAP100017)
***
190A 413018220 . INSULATING 1
200A 411016470 .COLUMN 2
ATTACHING PARTS
210A 411016850 .COLUMN 1
***
220A 75563331710 .MICROPROCESSOR PCB ASSY,EQUIPPED 1A 1
220B 75563323712 .MICROPROCESSOR PCB ASSY,EQUIPPED 1B 1
220C 75563303711 .MICROPROCESSOR PCB ASSY,EQUIPPED 1c 1
ATTACHING PARTS
230A H2QlUY020004AF .SCREW CLS M2X4 FOllO 2
(21181201042)
240A VTAX020TL .WASHER,SPRING TENSION M2 FOllO 2
(23202212006)
250A H2QlUY016004AF .SCREW CLS M1.6X4 FOllO 2
(2118316104)
260A 411016850 . COLUMN 2
***
270A 75563316707 ..LIGHTING LCD PCB,ASSY 1
280A 79901-60 . . . LENS BLUE F9293 2
(469000810)
290A OR3023 . ..LAMP INCANDESCENT 12V 30MA F6212 2
(469001170)
300A 75160-115-08 . ..TERMINAL BOARD U2338 SB
(467003830)
310A 42500738710 . ..LIGHTING LCD CIRCUIT 1
320A 425007380 ..LCD CIRCUIT 1
330A FST13A25 ..FLEXTRIP 15912 1
(424000230)
340A 7556333171OAA ..MICROPROCESSOR PCB WITH MEMORY NP 220A 1
SEE 77-19-86-06-OOlA FOR DET
340B 75563323712AA ..MICROPROCESSOR PCB WITH MEMORY NP 220B 1
SEE 77-19-86-06-OOlB FOR DET
340C 75563303711AA ..MICROPROCESSOR PCB WITH MEMORY NP 220C 1
SEE 77-19-86-06-OOlC FOR DET
-350A 75563311710 .BASE ASSY,EQUIPPED 1
360A 75563322710 ..INTERMEDIATE BASE,ASSY 1
ATTACHING PARTS
370A H2QlUY025006AF ..SCREW CLS M2.5X6 FOllO 2
(21181251062)
***
380A 75563321710 . ..CONNECTOR PCB ASSY 1
ATTACHING PARTS
- ltem not illustrated

77-l 9-86
Page 1001-2
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

390A GKQlUY030UF . ..NUT C M3 FOllO 2

(22121302302)
***
400A lN4007 . . ..SEMICONDUCTOR DEVICE, F4597 4
DIODE
(47707005)
410A 425007680 . . ..CONNECTOR CIRCUIT BOARD 1
-420A 75563312710 . ..BASE ASSY 1
430A FDBA50H14-19PNK . . ..CONNECTOR.RECEPTACLE. F1983 1
ELECTRICAL
(46700342)
ATTACHING PARTS
440A BEQlUY030006TDU . . ..SCREW CB M3X6 FOllO 2
(21221301062)
450A BEQlUY030012TDU . . ..SCREW CB M3X12 FOllO 2
(21221301102)
460A GKQlUY030UF . . ..NUT C M3 FOllO 4
(22121302302)
470A M4UJ030SF . . ..WASHER.LOCK W3 FOllO 4
(23430011102)
***
480A DF80601-14-1700 . . ..GASKET F1983 1
(41300263107)
490A 413017780 . . ..BASE 1
500A 75563313710 ..FILTER-HOLDER PLATE ASSY 1
510A lN5655A . ..SEMICONDUCTOR DEVICE,DIODE F8859 1
(47708003)
520A SCI1150-000 . ..FILTER 33095 2
(473000150)
530A 1214-007 . ..FILTER 12294 14
(473000070)
540A 75563327707 . ..FILTER-HOLDER PLATE,EQUIPPED 1
550A 5633-710-80-11A .NG SPEED AND LIMIT DEVIATION NP 1A 1
INDICATOR (CONT'D)
SEE 77-19-86-02-OOlA FOR DET
550B 5633-712-20-11A .NG SPEED AND LIMIT DEVIATION NP 1B 1
INDICATOR (CONT'D)
SEE 77-19-86-02-OOlB FOR DET
550C 5633-711-80-10A .NG SPEED AND LIMIT DEVIATION NP 1C 1
INDICATOR (CONT'D)
SEE 77-19-86-02-OOlC FOR DET

- Item not illustrated

77-I 9-86
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

40

310 460

300 90

280 230

305 250

315 240

50 450

260 ,390

440 130

430 100
70
435 110

420 120

140 150

400 -80

320 380

60 350

360

370

NG SPEED AND LIMIT DEVIATION INDICATOR (CONT’D)

Figure 2

77-l 9-86
Page 1002-0
FEB 28/94
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
CTEM 1234567 CODE assy

-0OlA 5633-717-80-11A NG SPEED AND LIMIT DEVIATION NP RF

INDICATOR (CONT'D)
SEE 77-19-86-Ol-550A FOR NHA
-0OlB 5633-712-20-11A NG SPEED AND LIMIT DEVIATION NP RF
INDICATOR (CONT'D)
SEE 77-19-86-Ol-550B FOR NHA
-0OlC 5633-711-80-10A NG SPEED AND LIMIT DEVIATION NP RF
INDICATOR (CONT'D)
SEE 77-19-86-Ol-550C FOR NHA
OlOA 75563325707 .POINTER 1AC 1
OlOB 75563325712 .POINTER 1B 1
ATTACHING PARTS
020A 2126316220 .SETSCREW M1.6X2 1
***
030A 42100501710 .DIAL 1A 1
030B 42100501712 .DIAL 1B 1
03OC 42100501711 .DIAL 1c 1
ATTACHING PARTS
040A 21231162804 .SCREW FC/90 M1.6X8 4
050A XUQlUYOlGAF .NUT H Ml.6 FOllO 4
(22111162132)
***
060A 9533CD .SWITCH,PUSH F7507 1
(466001560)
070A 75563308710 .LIGHTING DIAL PCB ASSY 1
ATTACHING PARTS
080A H2QlUY016008AF .SCREW CLS M1.6X8 FOllO 3
(2118316108)
090A XUQlUYOlGAF .NUT H Ml.6 FOllO 2
(22111162132)
***
100A 46900081006 ..LENS BLUE 2
1lOA OL-6839BPE ..LAMP INCANDESCENT 28V 20MA s3774 2
(46900130032)
120A 411019890 ..LAMP-HOLDER 2
130A BDF5871-13-32 ..TERMINAL BOARD 59730 SB
(467003960)
140A 411019030 .-SOLDERING NUT 1
150A 425007370 ..LIGHTING DIAL CIRCUIT BOARD 1
160A 75563307710 .LIGHTING POINTER PCB ASSY 1
ATTACHING PARTS
170A H2QlUY016012AF .SCREW CLS M1.6X2 2
(2118316112)
***

- ltem not illustrated

77-19-86
Page 1002- 1
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

180A 79901-60 ..LENS BLUE F0279 1

(469000810)
190A OL-6839BPE ..LAMP INCANDESCENT 28V 20MA s3774 1
(46900130032)
200A BDF5871-13-32 ..TERMINAL BOARD 59730 SE
(467003960)
210A 467004150 ..TERMINAL BOARD SE
ORDER OVERLGTH MPN
341 0799 1 14 40 0 MADE BY F2779
(467004150)
220A 425007400 ..LIGHTING POINTER CIRCUIT BOARD 1
230A 75563304707 .DACO ASSY 1
ATTACHING PARTS
240A 21441222481 .SCREW R2.56 UNC 187 1
250A VTAX025TL .WASHER,SPRING TENSION M2.5 FOllO 1
(23202712006)
Jr**
260A 1622 .RING RETAINING DIA.1.5 F3754 1
(265030520)
270A 41102066707 .TESTING AXLE EQUIPPED 1
280A 431000510 .SPRING 1
-290A 75563306707 .SET-UP GEAR ASSY 1
ATTACHING PARTS
300A H2QlUY020008AF .SCREW CLS M2X8 FOllO 1
(21181201082)
305A VTAX020TL .WASHER,SPRING TENSION M2 FOllO 1 R
(23202212006)
310A H2QlUY016008AF .SCREW CLS M1.6X8 FOllO 2
(2118316108)
***
315A RONDEXAl-7 .WASHER,SPRING TENSION Ml.7 FB185 2 R
(CAP100017)
Jr**
320A 41101904707 ..BUSHING 1
ATTACHING PARTS
330A 2126016220 ..SETSCREW M1.6X2 1 R
***
-340A 75567820710 ..SET-UP GEAR EQUIPPED 1
350A 75208502105 . ..MOTOR EQUIPPED 1
ATTACHING PARTS
360A 413009131 .CLAMP 2
370A H2QlUY020005AF :: .SCREW CLS M2X5 FOllO 2
(21181201052)
***
380A 75567821710 . ..SET-UP GEAR 1
- ltem not illustrated

77-19-86
Page 1002-2
FEB 28194
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

2
450A 41300779103 .NuT 3
460A 75563302707 .BODY,EQUIPPED 1

- Item not Illustrated

77-l 9-86
Page 1002-3
JUN 30191
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-I 1
Jnit
FIG PART NUMBER NOMENCLATURE USAGE ?er
ZTEM 1234567 CODE 3ssy

-0OlA 75563330710 LIGHTING-SMOOTHING PCB RF

SEE 77-19-86-Ol-080A FOR NHA
OlOA MK06G00104K .CAPACITOR,FIXED,CERIC F0350 1
O.lMF 10% 1OOV
(46241003104)
020A TY23M .cLAMP 59730 2
(25400042)
030A 222202118471 .CAPACITOR,FIXED,ELECTROLYTIC F0862 2
470MF 20% 63V
(46214701100)
040A 222203135151 .CAPACITOR,FIXED,ELECTROLYTIC F0862 1
150MF -10+50% 16V
(46211501016)
050A MK05G00104M .CAPACITOR,FIXED,CERAMIC F0350 4
O.lMF 20% 50V
(46241002100)
060A 46244703001 .CAPACITOR,FIXED,CERAMIC 1
470PF 20% 1OOV
ORDER OVERLGTH MPN
CN31-2Cl-lOOV470UM MADE BY F0114
(46244703001)
070A 222203137101 .CAPACITOR,FIXED,ELECTROLYTIC F0862 1
1OOMF -iO+50%~4OV
(46214001001)
080A lN4007 .SEMICONDUCTOR DEVICE,DIODE F4597 1
(47707005)
090A 1,5KE39CP .SEMICONDUCTOR DEVICE,DIODE F8859 1
(47708012)
1OOA lN4934 .SEMICONDUCTOR DEVICE,DIODE F4597 1
(47704004)
1lOA P6KE33P .SEMICONDUCTOR DEVICE,DIODE F8859 1
(47708032)
120A TY23M .CLAMP 59730 4
(25400042)
130A 35256 .REACTOR F5449 2
(46308019001)
140A T93ZlOKM .RESISTOR,VARIABLE,NON WIRE F1621 3
WOUND 1OKOHM 20%
(46159100202)
150A RB59-33UJ .RESISTOR,FIXED,WIRE WOUND F0114 1
33 OHM 5% 3w
(46120033160)
160A RS58YlOKF .RESISTOR,FIXED,FILM F0114 7
10KOHM 1% 1/8W
(46107100213)
- Item not illustrated

77-l 9-86
Page 1003-l
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-11

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy
3

170A RC21UlKJ .RESISTOR,FIXED,FILM F0114 I

1KOHM 5% 1/4W
(46118010260)
180A RS58Y5K62F .RESISTOR,FIXED,FILM F0114 I
5.62KOHM 1% 1/8W
(46107056213)
190A RS58Y2K05F .RESISTOR,FIXED,FILM F0114 2
2.05KOHM 1% 1/8W
(46107205514)
200A RS58Y2K21F .RESISTOR,FIXED,FILM F0114 I
2.21KOHM 1% 1/8W
(46107022213)
210A RS58YlK69F .RESISTOR,FIXED,FILM F0114 1
1.69KOHM 1% 1/8W
(46107169514)
220A RS58YlKF .RESISTOR,FIXED,FILM F0114 1
1KOHM 1% 1/8W
(46107010213)
230A RS58YlOOKF .RESISTOR,FIXED,FILM F0114 3
lOOKOHM 1% 1/8W
(46107100313)
240A RB59-56UJ .RESISTOR,FIXED,WIRE WOUND F0114 I
56 OHM 5% 3W
(46120056160)
250A LM339N .MICROCIRCUIT,LINEAR 27014 I
(47211001000)
260A LM358N .MICROCIRCUIT,LINEAR 27014 I
(47201031)
270A UA78S4OPC .MICROCIRCUIT,LINEA.R F4597 1
(47211016000)
280A MC7812CT .MICROCIRCUIT,LINEAR F4597 1
(47211018000)
ATTACHING PARTS
290A H2QlUY030006AF .SCREW CLS M3X6 FOllO 1
(21181301062)
300A XUQlUY030AF .NUT H M3 FOllO 1
(22111302242)
***
310A 425007350 .PRINTED CIRCUIT BOARD 1

- Item not illustrated

77-I 9-86
Page 1003-2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

-0OlA 75567860707 POWER SUPPLY PCB RF

SEE 77-19-86-Ol-110A FOR NHA
OlOA CTS13-25VlOMM .CAPACITOR,FIXED,ELECTROLYTIC F0114 5
1OMF 20% 25V
(46280101008)
020A 46240022001 .CAPACITOR,FIXED,CERIC 1
2200PF 20% 1OOV
ORDER OVERLGTH MPN
CN31-2Cl-lOOV2K2M MADE BY F0114
(46240022001)
030A MK05G00104M .CAPACITOR,FIXED,CERAMIC F0350 2
O.lMF 20% 50V
(46241002100)
040A CTSl-40VlOMM .CAPACITOR,FIXED,ELECTROLYTIC F0114 1
1OMF 20% 40V
(46280101010)
050A CTS13-50V4M7M .CAPACITOR,FIXED,ELECTROLYTIC F0114 1
4.7MF 20% 50V
(46280475100)
060A 46240102003 .CAPACITOR,FIXED,CERAMIC 2
1OOOOPF 20% 1OOV
ORDER OVERLGTH MPN
CN31-2Cl-100VlOKM MADE BY F0114
(46240102003)
070A lN5646A .SEMICONDUCTOR DEVICE,DIODE F8859 1
(47708004)
080A lN5662A .SEMICONDUCTOR DEVICE,DIODE F8859 2
(47708007)
090A BA157 .SF,MICONDUCTOR DEVICE,DIODE F4597 5
(47707002)
100A BZX55C4V7 .SEMICONDUCTOR DEVICE,DIODE F0114 1
(47702076)
1lOA BZX55C6V2 .SEMICONDUCTOR DEVICE,DIODE F0114 1
(47702041)
120A lN5555A .SEMICONDUCTOR DEVICE,DIODE 24444 1
(47708002)
130A LM336Z-5.0 .MICROCIRCUIT,LINEAR 27014 1
(47703001000)
140A T93Z2K2M .RESISTOR,VARIABLE,NON WIRE F1621 1
WOUND 2.2KOHM 20%
(46159022202)
150A BUZ73A .TRANSISTOR F4620 2
(47822311)
ATTACHING PARTS

- Item not illustrated

77-19-86
Page 1004-l
JUN 30/91
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-11

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
CTEM 1234567 CODE assy

160A H2QlUY030006AF .SCREW CLS M3X6 FOllO 1

(21181301062)
170A XUQlUY03OAF .NUTHM3 FOllO 1
(22111302242)
***
180A 2N5320 .TRANSISTOR F8859 1
(47822304)
190A 410215 .HEAT SINK F2405 1
(479000260)
ATTACHING PARTS
200A H2QlUY025006AF .SCREW CLS M2.5X6 FOllO 2
(21181251062)
210A 411013090 .SPACER 2
Jr**
220A 2N5322 .TRANSISTOR F8859 1
(47812303)
230A 31033191 .HEAT SINK F2405 1
(479000320)
240A RH59-33UJ .RESISTOR,FIXED,WIRE WOUND F0114 1
33 OHM 5% 3w
(46120033160)
250A RS58YlOKF .RESISTOR,FIXED,FILM F0114 4
1OKOHM 1% 1/8W
(46107100213)
260A RC21UlOKJ .RESISTOR,FIXED,FILM F0114 1
1OKOHM 5% 1/4W
(46118100260)
270A RC21UlOUJ .RESISTOR,FIXED,FILM F0114 2
10 OHM 5% 1/4w
(46118010160)
280A RS58Y16K5F .RESISTOR,FIXED,FILM F0114 1
16.5KOHM 1% 1/8W
(46107165214)
290A RS58Y6K19F .RESISTOR,FIXED,FILM F0114 3
6.19KOHM 1% 1/8W
(46107062213)
300A RC21UlOOUJ .RESISTOR,FIXED,FILM F0114 1
100 OHM 5% 1/4w
(46118100160)
310A RC21U510UJ .RESISTOR,FIXED,FILM F0114 1
510 OHM 5% 1/4w
(46118510160)
320A RS58Y3K83F .RESISTOR,FIXED,FILM F0114 I
3.83KOHM 1% 1/8W
(46107383514)
- Item not illustrated

77-l 9-86
Page 1004-2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WlTH IPL
5833-710-80-11
Unit
FIG PARTNUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

330A RS58Y4K12F .RESISTOR,FIXED,FILM FOlld I

4.12KOHM 1% 1/8W
(46107412514)
340A RC21UlKJ .RESISTOR,FIXED,FILM F0114 2
1KOHM 5% 1/4W
(46118010260)
350A MC7815CT .MICROCIRCUIT,LINEAR F4597 1
(47211006000)
ATTACHING PARTS
360A H2QlUY030006AF .SCREW CLS M3X6 FOllO i
(21181301062)
370A XUQlUY030AF .NUTHM3 FOllO 1
(22111302242)
***
380A UC2525AJ .MICROCIRCUIT,LINEAR 12969 1
(47211008000)
390A LM358N .MICROCIRCUIT,LINEAR 27014 1
(47201031)
400A MC7818CT .MICROCIRCUIT,LINEAR F4597 1
(47211007000)
ATTACHING PARTS
410A H2QlUY030006AF .SCREW CLS M3X6 FOllO 1
(21181301062) .-
420A XUQlUY030AF .NUT H M3 FOllO 1
(22111302242)
***
430A MC7805CT .MICROCIRCUIT,LINEAR F4597 1
(47211005000)
ATTACHING PARTS
440A H2QlUY030006AF .SCREW CLS M3X6 FOllO 1
(21181301062)
450A XUQlUYO3OAF .NUTHM3 FOllO 1
(22111302242)
***
460A MCT2 .SEMICONDUCTOR DEVICE,PHOTO 58361 1
(47215001000)
470A 46501037100 .TRANSFORMER 1
480A 46501038100 .REACTOR 1
490A BDF5871-13 .TF.RMINAL BOARD 15912 SB
(467003960)
500A 425004440 .PRINTED CIRCUIT BOARD 1

77-19-86
Page 1004-3
JUN 30/91
 BRION-LEROUX AERONAUTICWE
COMPONENT MAINTENANCE MANUAL WITi4 IPL
5833-710-80-11
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE ass1

-0OlA 75563317707 CONDITIONING PCB RI

SEE 77-19-86-Ol-160A FOR NHA
OlOA MK05G00104M .CAPACITOR,FIXED,CERAMIC F0350 ':
w
O.lMF 20% 50V
(46241002100)
020A MK05G00222M .CAPACITOR,FIXED,CERAMIC F0350 t
2200PF 20% 1OOV
(46240226050)
030A CTS13-25VlOMM .CAPACITOR,FIXED,ELECTROLYTIC F0114 7
1OMF 20% 25V
(46280101008)
040A MK05G00221M .CAPACITOR,FIXED,CERAMIC F0350 3
220PF 20% 200V
(46242203050)
050A MK05G00103M .CAPACITOR,FIXED,CERIC F0350 2
1OOOOPF 20% 1OOV
(46240102002)
060A MK06G00105K .CAPACITOR,FIXED,CERAMIC F0350 3
1MF 10% 50V
(46240011010)
070A lN4148 .SEMICONDUCTOR DEVICE,DIODE F0862 4
(47701014)
080A BZX55C36 .SEMICONDUCTOR DEVICE,DIODE F0114 3
(47702075)
090A lN6061A .SEMICONDUCTOR DEVICE,DIODE F8859 3
(47708016)
1OOA T93Z47KM .RESISTOR,VARIABLE,NON WIRE F1621 1
WOUND 47KOHM 20%
(46159470202)
1lOA T93Z4K7M .RESISTOR,VARIABLE,NON WIRE F1621 1
WOUND 4.7KOHM 20%
(46159047201)
120A 2N5320 .TRANSISTOR F8859 1
(47822304)
130A 2N5322 .TRANSISTOR F8859 1
(47812303)
140A 31033191 .HEAT SINK F2405 1
(479000320)
150A 2N6782 .TRANSISTOR 17856 3
(47882328)
160A RC21UlOKJ .RESISTOR,FIXED,FILM F0114 4
1OKOHM 5% 1/4W
(46118100260)

- Item not illustrated

77-I 9-86
Page 1005-l
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-11
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

170A RS58Y27K4F .RESISTOR,FIXED,FILM F0114 1

27.4KOHM 1% 1/8W
(46107270213)
180A RS58YlKF .RESISTOR,FIXED,FILM F0114 1
1KOHM 1% 1/8W
(46107010213)
190A RS58Y20KF .RESISTOR,FIXED,FILM F0114 2
20KOHM 1% 1/8W
(46107200213)
200A RS58Y41K2F .RESISTOR,FIXED,FILM F0114 1
41.2KOHM 1% 1/8W
(46107412214)
210A RC21U360UJ .RESISTOR,FIXED,FILM F0114 1
360 OHM 5% 1/4W
(46118360160)
220A RS58Y5KllF .RESISTOR,FIXED,FILM F0114 1
5.11KOHM 1% 1/8W
(46107051213)
230A RS58Y51KlF .RESISTOR,FIXED,FILM F0114 1
51.1KOHM 1% 1/8W
(46107510213)
240A RS58Y2K61F .RESISTOR,FIXED,FILM F0114 2
2.61KOHM 1% 1/8W
(46107261514)
250A RC21U20KJ .RESISTOR,FIXED,FILM F0114 1
20KOHM 5% 1/4W
(46118200260)
260A RC21U470KJ .RESISTOR,FIXED,FILM F0114 1
470KOHM 5% 1/4W
(46118470360)
270A RC31U150KJ .RESISTOR,FIXED,FILM F0114 1
150KOHM 5% 1/2w
(46119150360)
280A RS58Y4K02F .RESISTOR,FIXED,FILM F0114 1
4.02KOHM 1% 1/8W
(46107040213)
290A RS58Y4K42F .RESISTOR,FIXED,FILM F0114 1
4.42KOHM 1% 1/8W
(46107442514)
300A RS58P5K49B .RESISTOR,FIXED,FILM F0114 1
5.49KOHM 0.1% 1/8W
(46109549514)
310A RS58P5K62B .RESISTOR,FIXED,FILM F0114 1
5.62KOHM 0.1% 1/8W
(46109562514)
- Item not illustrated

77-l 9-86
Page 1005-2
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5533-710-80-11
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

320A RC31U4K3J .RESISTOR,FIXED,FILM F0114 2

4.3KOHM 5% 1/2W
(46119043260)
330A RC21U470UJ .RESISTOR,FIXED,FILM F0114 4
470 OHM 5% 1/4w
(46118470160)
340A RS58Y133KF .RESISTOR,FIXED,FILM F0114 1
133KOHM 1% 1/8W
(46107133314)
350A RS58Y5K76F .RESISTOR,FIXED,FILM F0114 1
5.76KOHM 1% 1/8W
(46107576514)
360A RC31UlOKJ .RESISTOR,FIXED,FILM F0114 1
1OKOHM 5% 1/2W
(46119010360)
370A RC31U4K7J .RESISTOR,FIXED,FILM F0114 2
4.7KOHM 5% 1/2W
(46119047260)
380A SILlO-9-3K9G .RESISTOR NETWORK,FIXED,FILM F1621 1
3.9KOHM 2%
(46127039260)
390A LF398N .MICROCIRCUIT,LINEAR 27014 2
(47211003000)
400A LM358N .MICROCIRCUIT,LINEAR 27014 2
(47201031)
410A OPO7CP .MICROCIRCUIT,LINEAR 06665 1
(47211002000)
420A LM339N .MICROCIRCUIT,LINEAR 27014 1
(47211001000)
430A AMPOlFX .MICROCIRCUIT,LINEAR 06665 1
(47211023000)
440A OP2OHZ .MICROCIRCUIT,LINEAR 06665 1
(47211021000)
450A UHP408 .MICROCIRCUIT,LINEAR 56289 1
(47211037)
460A TLP521-4 .SEMICONDUCTOR DEVICE,PHOTO s5339 1
(47215015)
470A TLP521-2 .SEMICONDUCTOR DEVICE,PHOTO s5339 1
(47215014)
480A MC1455Pl .MICROCIRCUIT,LINEAR F4597 1
(47201017)
490A MC74HC74N .MICROCIRCUIT,DIGITAL F4597 1
(472100400)
500A BDF5871-13 .TERMINAL BOARD 15912 SE
(467003960)

774 9-86
Page I 005 - 3
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WlTH IPL
5533-710-80-l 1
Unit
FIG PARTNUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

510A 75160-115-08 .TERMINAL BOARD U2338 SB

(467003830)
520A 425007360 .PRINTED CIRCUIT BOARD 1

- Item not illustrated

774 9-86
Page 1005-4
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5833-710-80-l I

ICl

270
Jl

260

230
IC13

- 1220
IC2

go-
R7 IC7

60 240
\ \ \
z: C8 ICI4 zi 2% 8?
MICROPROCESSOR PCB WITH MEMORY
Figure 6

77-l 9-86
Page 1005-O
JUN 30/91
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1
Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

-0OlA 7556333171OAA MICROPROCESSOR PCB WITH MEMORY NP RF

SEE 77-19-86-Ol-340A FOR NHA
-0OlB 75563323712AA MICROPROCESSOR PCB WITH MEMORY NP RF
SEE 77-19-86-Ol-340B FOR NHA
-0OlC 75563303711aA MICROPROCESSOR PCB WITH MEMORY NP RF
SEE 77-19-86-Ol-340C FOR NHA
OlOA 4805633710 .MEMORY 1A 1
OlOB 4805633712 .MEMORY 1B 1
OlOC 4805633711 .MEMORY 1c 1
-020A 75567862700 .MICROPROCESSOR PCB WITHOUT MEMORY 1
030A 46240223000 ..CAPACITOR,FIXED,CERAMIC 2
22PF 10% 1OOV
ORDER OVERLGTH MPN
CE13LlBClOOV22UK MADE BY F0114
(46240223000)
040A CTS13-25VlOMM ..CAPACITOR,FIXED,ELECTROLYTIC F0114 1
10MF 20% 25V
(46280101008)
050A MK05G00104M ..CAPACITOR,FIXED,CERAMIC F0350 3
O.lMF 20% 50V
(46241002100)
060A 46241003103 ..CAPACITOR,FIXED,CERAMIC 1
100PF 10% 1OOV
ORDER OVERLGTH MPN
.CE13L1BC100V100UK MADE BY F0114
(46241003103)
070A lN4148 ..SEMICONDUCTOR DEVICE,DIODE F0862 1
(47701014)
080A CB1065 ..RESISTOR,FIXED,COMPOSITION 01121 1
1OMOHM 5% 1/4W
(46118010660)
090A RC21UlMJ ..RESISTOR,FIXED,FILM F0114 4
1MOHM 5% 1/4W
(46118100460)
100A RC21UlOOUJ ..RESISTOR,FIXED,FILM F0114 2
100 OHM 5% 1/4W
(46118100160)
1lOA RC21UlOKJ ..RESISTOR,FIXED,FILM F0114 1
1OKOHM 5% 1/4W
(46118100260)
120A RC21U47KJ ..RESISTOR,FIXED,FILM F0114 1
47KOHM 5% 1/4W
(46118470260)

- ltem not illustrated

77-19-86
Page 1006-l
JUN 30/92
 BRION-LEROUX AERONAUTIQUE
COMPONENT MAINTENANCE MANUAL WITH IPL
5633-710-80-l 1

Unit
FIG PART NUMBER NOMENCLATURE USAGE per
ITEM 1234567 CODE assy

130A SILlO-9-1OKG ..RESISTOR NETWORK,FIXED,FILM F1621 1

1OKOHM 2%
(46127100260)
140A MC146805E2P ..MICROCIRCUIT,DIGITAL F4597 1
(47213001000)
150A MC74HC373N ..MICROCIRCUIT,DIGITAL F4597 1
(47210004000)
160A MC146823P ..MICROCIRCUIT,DIGITAL F4597 1
(47213002000)
170A MC74HClON ..MICROCIRCUIT,DIGITAL F4597 1
(47210003000)
180A MC14011BCP ..MICROCIRCUIT,DIGITAL F4597 1
(47201024)
190A 47210034000 ..OSCILLATOR LCD/RS 1
200A CD4056BE ..MICROCIRCUIT,DIGITAL 54590 3 R
(47214002000)
210A CD4054BE ..MICROCIRCUIT,DIGITAL 54590 1 R
(47214001000)
220A MC14040BCP ..MICROCIRCUIT,DIGITAL F4597 1
(47210001000)
230A DAC1219LCJ ..MICROCIRCUIT,LINEAR 27014 1
(47210002000)
240A OPO7CP ..MICROCIRCUIT,LINEAR 06665 1
(47211002000)
250A HC18U3276K8000 ..QUARTZ 3,2768MHZ F6205 1
(47100001000)
260A 47900033000 ..SUPPORT MICROCIRCUIT 1
ORDER OVERLGTH MPN
115-91-624-41-003 MADE BY S5265
(47900033000)
270A FST22All ..FLEXTRIP 15912 1
(424000030)
280A FST22A12 ..FLEXTRIP 15912 1
(424000010)
290A 425004450 .PRINTED CIRCUIT BOARD 1

- Item not illustrated

77-i 9-86
Page 1006-2
FEB 28194