TITLE OF THE MINI PROJECT IN CAPITAL LETTERS

Mini Project-I/Intern-I report submitted in partial fulfillment

of the requirements for the award of degree of

Bachelor of Technology
in
Electronics and Communication Engineering
by

Name of the Student(Roll. No)

Department of Electronics and Communication Engineering

GAYATRI VIDYA PARISHAD COLLEGE OF ENGINEERING(AUTONOMOUS)
(Affiliated to J.N.T University, Kakinada, A.P)
VISAKHAPATNAM- 530 048
Month, Year
 ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT

CERTIFICATE
This is to certify that the Mini project-I/Intern-I titled
_______________________________a bonafide record of the work done
by----------------Student name (Roll Nos)---------- in partial fulfillment of the
requirements for the award of the degree of Bachelor of Technology in Electronics
and Communication Engineering of the Gayatri Vidya Parishad College of
Engineering (Autonomous) affiliated to Jawaharlal Nehru Technological University,
Kakinada during the year 2022-2023.

Under the guidance of: Head of the Department:

Mentor Name Dr. N.Deepika Rani

Designation, Professor &HoD,
Dept. of ECE, Dept. of ECE,
GVPCE (A) GVPCE (A)

2
INTERNSHIP CERTIFICATE

3
ACKNOWLEDGEMENT

4
 ABSTRACT
The abstract summarizes the content of the thesis, stating the problem being
examined, the procedure or methods used, and any conclusions that are drawn.

5
 CONTENTS
Page No.

CERTIFICATE II

DECLARATION III

ACKNOWLEDGEMENT IV

ABSTRACT IV

CONTENTS IV

LIST OF TABLES IV

LIST OF FIGURES IV

CHAPTER 1 CHAPTER TITLE(STYLE-PAPER TITLE) 4

1.1. Main headings (style -Heading 1) 4

CHAPTER 2 SECOND CHAPTER (OPTIONAL) 4

2.1. Heading 4

CHAPTER 3 THIRD CHAPTER (OPTIONAL) 4

3.1. Heading 4

CHAPTER 4 FOURTH CHAPTER (OPTIONAL) 4

4.1. Heading 4

CHAPTER 5 FIFTH CHAPTER (OPTIONAL) 4

5.1. Heading 4

CONCLUSION 4

FUTURE SCOPE 4

REFERENCES 4

6
 LIST OF TABLES
TABLE 1.1. Table heading (style- table head)............................................................4

7
 LIST OF FIGURES
Figure 1.1. First figure caption (style-figure caption)................................................4

8
 CHAPTER 1
TITLE(STYLE-PAPER TITLE)
(style-body text) The format for Title of the Chapter is Times new roman (Bold) of
font size: 18. Each section in a chapter shall be properly numbered for ex:1.1, 1.2 etc.,
where the first number represents the chapter number and second number the section
number. No number shall be given for the first paragraph in a chapter. The format for
Body text is Times new roman of font size:12.

1.1. Main headings (style -Heading 1)

The format for section headings is Times new roman (Bold) of font size: 16. Sub
sections, if any, may be indicated as 1.1.1, 1.1.2, etc. i.e., the first digit representing the
chapter, the second representing the section and the third representing the sub-section and
so forth.

1.1.1. Figures (style-Heading 2)

The format for sub-section headings is Times new roman (Bold) of font size: 14.
The figures occurring in a chapter shall be serially numbered as Fig. 1.1, 1.2 etc., at the
bottom, where the first number represents the chapter, the second number the figure
number, the figure number shall be followed by anappropriate description. The sample
Figure format is shown in Figure 1.1. The format for Figure caption is Times new roman
of font size:10.

Figure 1.1. First figure caption (style-figure caption)

9
1.1.2. Tables (style-Heading 2)

The Tables occurring in a chapter shall be serially numbered as Table 1.1, Table
1.2 etc. at the top, where the first number represents the chapter; the second number the
Table number. The appropriate caption should be given on the top of the table. The sample
Table format is shown in Table 1.1. The format for Table heading is Times new roman of
font size: 10.

TABLE 1.1. Table heading (style- table head)

Table col head Table col head

(style-table
copy)
Bla Bla Bla Bla

Bla Bla Bla Bla Bla

1.1.3. Equations

The equations occurring in a chapter shall be serially numbered as (1.1),(1.2) etc.

where the first number represents the chapter; the second number the equation number as
given in the following example

[ (
A P ( z ) =A P −1 ( z )∗ δ ( z ) +δ z−
s−1
s
P )] (1.1)

The Font size of the equation must be: 12

[ (
A P ( z ) =A P −1 ( z )∗ δ ( z ) +δ z−
s−1
s
P )] (1.2)

1.1.4. References

All the references mentioned in the Bibliography must be cited at least once in the
text. In the text of the chapters,a number enclosed in square brackets, eg. [1] or [26],

10
indicates the relevant reference. Each reference number should be enclosed in square
brackets on the same line as the text, before any punctuation, with a space before the
bracket. The format for the Journal Papers, Conference papers, Books and Websites is
given in the following sections.

11
 CHAPTER 2
CHAPTER (OPTIONAL)

2.1. Heading

Body Text

12
 CHAPTER 3
CHAPTER (OPTIONAL)

3.1. Heading

Body Text

13
 CHAPTER 4
CHAPTER (OPTIONAL)

4.1. Heading

Body Text

14
 CHAPTER 5
CHAPTER (OPTIONAL)

5.1. Heading

Body Text

15
CONCLUSION

16
FUTURE SCOPE

17
 REFERENCES
(Style-references)

Format for journal paper shall be:

[1] Nakamara, Y., and Ghodoussi, M., “Dynamic computation of closed-link robot mechanisms with non-
redundant and redundant actuators”, IEEE Transactions on Robotics and Automation, 1989, Vol. 5,
No. 3, pp. 294-302.

Format for conference paper shall be:

[2] Codourey, A. and Burdet, E., “A body oriented method for finding a linear form of the dynamic
equations of fully parallel robot”, in Proceedings of IEEE International Conference on Robotics and
Automation, Albuquerque, 1997, pp. 1612–1618.

Format for text book shall be:

[3] Hibbeler R. C., Mechanics of Materials, 8th Edition, Prentice Hall, Delhi, 2011.

Format for website shall be:

[4] www.

18