Scribd
Upload
3 views

Eng Manual User

The document provides instructions for operating a PLC-controlled pump system through a control panel interface. Users must log in to access advanced features, including time settings for pumps and manual control options. The document also details how to set timers for pump operation and manage backwash settings for filters.

Uploaded by

kerkkrai2343
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3 views

Eng Manual User

The document provides instructions for operating a PLC-controlled pump system through a control panel interface. Users must log in to access advanced features, including time settings for pumps and manual control options. The document also details how to set timers for pump operation and manage backwash settings for filters.

Uploaded by

kerkkrai2343
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

This page show all workable pumps running by PLC after turn

on the switch on control panel if you want to change the screen,


you can change it by tap on the button “MENU”
MENU panel will show only 3 button if you didn’t login. There
are Main Page, Softener Page and Event List. If you want to
control by hand or change time setting, you have to tap the
button “LOGIN” first for login into the system.
After tap the login button it’ll pop up the login window, you
need to insert the username and password by tapping the light
blue bar as you can see number ① is USERNAME, number ② is PASSWORD.
First step, enter the Username as given on the topic then tap
① “Enter” button it’ll popup a confirmation window for continue
this operation, tap ② “YES”. Second step, tap the Password box
under the Username box then enter 4 digit as given on the topic
and tap Enter button. After finished Enter Username and
Password tap ③ “Login” button to login to Admin3.
After login, you can see there are 5 buttons to choose.
① TIME SET : For setting working time of the pump system.
② BACKWASH : For day setiing to backwash the filter.
③ MANUAL : For control each device by HMI Interface.
④ BAS STATUS : For show status between PLC and BAS
⑤ ANALOG SCAL : For setting scale Analog value of
Temperature & Humidity and Flow Meter
There are 2 topic of setting the time.
① Time Setting for Overflow Pump
② Time Setting for Filter Pump
In the red square box Ⓐ is time set for turning on the pump
by separate to 2 box as you can see, there are Hour box and
MIN box. Also there are 2 rows for setting the time to turn on
the pump in different time.
In the red square box Ⓑ is time set for turning off the pump
by separate to 2 box as you can see, there are Hour box and
MIN box. Also there are 2 rows for setting the time to turn off
the pump in different time.
**REMARK** Arrow → in the picture means for each row. It’ll work
separate way and end each of their row. Example, Setting first of
the row to 8 hour and 0 minute then another one is 12 hour and 0
minute. When the real time clock in PLC reach to 8 o’clock or
more than this, the red lamp will turn into green lamp, show the
status of the pump that has turn on. Also the real time clock in
PLC reach to 12 o’clock or more than this, the green lamp will turn
into red lamp, show the status of the pump that has turn off.
Switch button number ① is the button for changing Auto
Mode to Manual Mode, Normally it’ll set to Off. Whenever you
want to control some device by local control, this button must
have to turn on first before tapping other button on the screen.
After you tap the button number ① the auto system will be cut off
instantly also the other devices will turn off from now on you can
control the device for checking or test something by tapping the
button on the right. All button has a name on it you can check one
by one device. When you finish you checking or test, remember
this button number ① has to be Off to changing to Auto mode.
Swtich button number ② is the button for turn on-off the
receiver that control by BAS. This system is for control a program
scene of RGB Led Light only on this HMI Interface. Remind
yourself everytime this button has to turn off for turn on the
receiver from BAS.
Number ① show the current day of PLC. Number ② is the tick
box for choose the day you want to Backwash the Filter reference
by real time clock of PLC in Number ③ is the box to enter the time
you want to Backwash the filter.
Number ④ is Backwash duration time of Filter, you can enter
the value on this box after you insert the value you need to
refresh the value to make a timer remember current value you
had enter. By tapping the button Number ⑤ to reset the duration
time value.

You might also like