MODEL: 10JR

High-density Signal Conditioners 10-RACK 0: Specify

Note: Consult M-System for 2-wire RTD

RTD TRANSMITTER
(field-programmable) [2] OUTPUT 1
Functions & Features Current
• Accepting direct input from an RTD and providing two A: 4 – 20 mA DC (Load resistance 600 Ω max.)
standard process signals Voltage
• Micro-processor based 6: 1 – 5 V DC (Load resistance 500 Ω min.)
• Field-programmable temperature range
• Linearization [3] OUTPUT 2
• Burnout protection 0: None
• Loop testing via hand-held programmer PU-2x Voltage
• Optional second channel output available at the front 6: 1 – 5 V DC (Load resistance 5000 Ω min.)
terminals and at the Standard Rack connector

Typical Applications POWER INPUT

• Ideal for quick spare part DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Burnout
blank: Upscale burnout
/BL: Downscale burnout
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
MODEL: 10JR-[1][2][3]-R[4] /C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
ORDERING INFORMATION
• Code number: 10JR-[1][2][3]-R[4]
Specify a code from below for each [1] through [4]. RELATED PRODUCTS
(e.g. 10JR-4A6-R/BL/Q) • Programming Unit (model: PU-2x)
• Temperature range (e.g. 0 – 500°C) • PC configurator software (model: JXCON)
• Specify the specification for option code /Q Downloadable at M-System’s web site.
(e.g. /C01) A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
[1] INPUT RTD (2- or 3-wire) cable types.
1: JPt 100 (JIS'89)
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 30°C, 54°F)
3: Pt 100 (JIS'89) GENERAL SPECIFICATIONS
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F) Construction: Rack-mounted; terminal access via screw
4: Pt 100 (JIS'97, IEC) terminals at the front and via card-edge connector at the
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F) rear; terminal cover provided
5: Pt 50 Ω (JIS'81) Connection
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 60°C, 108°F) Input: M3.5 screw terminals (torque 0.8 N·m)
6: Ni 508.4 Ω Output: Card-edge connector and M3.5 screw terminals
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 20°C, 36°F) (torque 0.8 N·m)

http://www.m-system.co.jp/ 10JR SPECIFICATIONS ES-0864 Rev.9 Page 1/3

 MODEL: 10JR
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Linearization: Standard
Adjustments: Programming Unit (model: PU-2x); RTD type
(between Pt 100 and JPt 100 only), temp. range, zero and
span, simulating output, etc.
(Refer to the users manual of JXCON for the adjustments
configurable with JXCON.)

INPUT SPECIFICATIONS
Maximum leadwire resistance: 20 Ω per wire (3-wire)
Sensing current: 2 mA (Pt)
If not specified, the input range is shown below.
1: JPt 100 (JIS '89) 0 – 100°C
3: Pt 100 (JIS '89) 0 – 100°C
4: Pt 100 (JIS '97, IEC) 0 – 100°C
5: Pt 50 Ω (JIS '81) 0 – 200°C
6: Ni 508.4 Ω 0 – 100°C

INSTALLATION
Current consumption: Approx. 60 mA with voltage output 1
Approx. 90 mA with current output 1
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
Weight: 220 g (0.49 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % or ±0.1°C (±0.18°F), whichever is greater
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output 1 to output 2 to power)
1500 V AC @ 1 minute (input or output or power to ground)

http://www.m-system.co.jp/ 10JR SPECIFICATIONS ES-0864 Rev.9 Page 2/3

 MODEL: 10JR
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
8 (.31) 7–M3.5 SCREW
2–4.3 (.17) dia.
MTG HOLE
TERMINAL COVER

1 2

82 (3.23)
99 (3.90 )
91 (3.58)

5 6

7 8

3 (.12)
25 (.98) 51 (2.01) 130 (5.12)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Burnout
RTD
A 1 Isolation
Low Drift Digital Output
B 2 7 +
Amplifier Computation Driver
OUTPUT 1
B 3 8 –
Reference
Resistor Z S
Constant
Current Output
5 +
Driver
PU-2x MODULAR JACK OUTPUT 2
SERIAL TRANSMISSION LINE 6 –
CONNECTOR

OUTPUT 2*

POWER

*1 output type has the output 1 connected to the card-edge connector in parallel.
Remark 1) The section enclosed by broken line is only for 2nd output channel.

Specifications are subject to change without notice.

http://www.m-system.co.jp/ 10JR SPECIFICATIONS ES-0864 Rev.9 Page 3/3