RC_DS_ISCOM2600G_20190409_0
RC_DS_ISCOM2600G_20190409_0
Overview
The ISCOM2600G series switches are the new-generation, environmental-friendly, and energy-saving Ethernet
switches independently developed by Raisecom, which can provide 1000 Mbit/s access and 10 Gbit/s uplink
interfaces. Based on the high-performance hardware platform and Raisecom new-generation switching software
platform, the ISCOM2600G series switches provide multiple features, such as flexible networking, various
security control, and easy management and meanwhile support mature IPv6 and intelligent PoE management. The
ISCOM2600G series switches support Intelligent Stacking Framework (ISF), which means that multiple switches
can be virtualized as one device logically to form a highly reliable, scalable, manageable, and intelligent network.
This series can be widely applied to multiple scenarios, such as enterprise park access and GE to desktop.
ISCOM2608G-2GE
Eight 10/100/1000Base-T Ethernet interfaces
and two 1000 Mbit/s Combo interfaces
AC model and DC model
Features
In addition to traditional STP/RSTP/MSTP spanning tree protocol, the ISCOM2600G series switches also support
the latest Ethernet Ring Protection Switching (ERPS) standard defined in ITU-T G.8032, which applies to various
ring network topologies, such as single ring, tangent ring, and intersecting ring, and can provide sub-50ms
The ISCOM2600G series switches support multiple access control technologies and user authentication security
technologies, such as ACL, Dot1X, RADIUS, and TACACS+ to flexibly adapt to multiple authentication
requirements of the network environment.
ARP attacks and ARP virus are the number one threat to LAN security. The ISCOM2600G series switches support
rich ARP defense functions, such as dynamic ARP detection which can check user validity and ARP packet
validity, and ARP rate limiting which prevents the CPU from being impacted by a large number of ARP packets,
and so on.
The ISCOM2600G series switches discard invalid packets that do not match the binding entry by establishing and
maintaining the DHCP snooping binding table. By using the DHCP Snooping trusted interface, the ISCOM2600G
series switches can also guarantee the legality of the DHCP server.
The ISCOM2600G series switches support various management modes, such as SNMPv1/v2c/v3, Raisecom NMS,
CLI, Web network management, Telnet, in-band management, and out-of-band management, which facilitate
maintenance; support multiple encryption methods, such as SSH2.0, which make management more secure; and
support RMON and interface traffic statistics which facilitate network optimization and reconstruction.
The ISCOM2600G series switches support automatic configuration downloading and software upgrade from the
DHCP server, and batch remote upgrade through Raisecom NMS to reduce the operation and maintenance costs.
The ISCOM2600G series switches support MAC-based VLAN partitions, which is a good solution to the smart
and flexible management of mobile office.
The power interface on some models of the ISCOM2600G series switches is on the front panel, which simplifies
the operation and maintenance (single-sided) of the entire equipment, and provides more flexible cabinet
placement. You can place the cabinet against the wall or against the cabinet, saving the space.
With complete IPv6 management and certification functions, the ISCOM2600G series switches are suitable for
the management in IPv6 network management environment.
The ISCOM2600G series switches comply with IEEE 802.3af and IEEE 802.3at standards. The interface can
supply up to 30 W power.
The ISCOM2600G series switches are well compatible to PDs and provide forcible power supply mode for
non-standard PDs.
The ISCOM2600G series switches support intelligent PoE management, including enabling/disabling power
supply to interfaces, configuring output power of interfaces, configuring priority of power supply, power
overloading protection, overtemperature protection.
The ISCOM2600G series switches support intelligent PoE power supply, including timed power supply,
periodically restarting PDs, monitoring connection status of PDs, and restarting PDs upon disconnection.
Raisecom ISF
The ISCOM2600G series switches support ISF, which means that up to 9 switches can be logically virtualized
into one switch to simplify configurations and management. Device reliability can be improved through
redundancy backup among member devices. Link reliability can be improved through link aggregation across
devices. Interfaces and bandwidths can be easily expanded by adding member devices. The GE interfaces or
10GE interfaces can be stacked, which is of low cost and simple structure. The ISCOM2600G series switches also
support long-distance stacking.
Technical specifications
Packet
forwarding 15 Mpps 42 Mpps 96 Mpps 78 Mpps 131 Mpps
rate
ISCOM2608G-2GE: 260 130 43.6
Dimensions
ISCOM2608G-2GE-PWR: 300 220 43.6
(mm) (Width ×
ISCOM2624G-4GE, ISCOM2624G-4C: 440 220 43.6
Depth ×
ISCOM2624G-4GE-PWR, ISCOM2624G-4GE-PWR, ISCOM2648G-4GE, ISCOM2648G-4C: 440
Height)
300 43.6
Management 1 RJ45 Console interface
interface 1 SNMP out-of-band management interface
16K MAC addresses
Automatic learning and aging of MAC addresses and static MAC address
MAC address
Static, dynamic, and blackhole MAC address entries
table
MAC address limit based on interface or VLAN
Managing MAC address flapping
4K VLANs
MAC/protocol/IP subnet/interface-based VLAN
Basic QinQ and selective QinQ
VLAN VLAN mapping
Private VLAN
Voice VLAN
GVRP
ERPS (G8032)
Ring network STP/RSTP/MSTP/MRSTP
protection BPDU protection and root protection
Loop detection
DHCP Client
DHCP Snooping
DHCP DHCP Relay
DHCP Server and Option43
DHCP Snooping Option 61/82 and DHCP Relay Option 82
Traffic mirroring
Mirroring
Local and remote port mirroring
Rate limiting in the ingress direction and egress direction of the interface
8 queues for each interface
SP, WRR, DRR, SP+WRR, and SP+DRR
Packet redirection
802.1p and DSCP priority remarking for packets
QoS/ACL
Interface-based traffic monitoring and dual-rate three-color CAR
L2–L4 packet filtering based on source MAC address and destination MAC address
Packet filtering based on source IP address, destination IP address, TCP/UDP source/destination
interface ID, protocol, and VLAN
Hierarchy-CAR
ISF
Management through the Console interface and out-of-band interface
SNMPv1/v2c/v3 and various management modes, such as CLI, Web, Telnet, and SSHv2.0
Raisecom NView NNM system
RMON
LLDP/LLDP-MED
Syslog and hierarchical alarm reporting
Ping and Tracert
Management Dying Gasp alarm
and NTP and SNTP
maintenance Virtual cable test
Interface loopback
Auto-provisioning, which means that configurations can be automatically downloaded and software
upgraded from the DHCP server
Interface loop detection
Optical module DDM
Link-state tracking
DLDP unidirectional link detection
Dual systems
Networking application
In enterprise park access scenario, the ISCOM2600G series switches serve as the access devices and are
connected downstream to the data devices in the enterprise/campus/residency and upstream to the L3 aggregation
devices, accessing and transmitting the bandwidth, voice, Wi-Fi, and video services, thus meeting the users'
requirements for high bandwidth and multi-service access.
Ordering information
optical modules)
Single AC/DC power supply
ISCOM2648G-4C-A Telecom MAN access Ethernet switch
C/DC/S Forty-eight 10/100/1000 Mbit/s Ethernet electrical interfaces
4 SFP+ 10GE optical interfaces (support 1000 Mbit/s SFP/10 Gbit/s SFP+
optical modules)
Single AC/DC power supply
ISCOM2648G-4C-A Telecom MAN access Ethernet switch
C/DC/D Forty-eight 10/100/1000 Mbit/s Ethernet electrical interfaces
4 SFP+ 10GE optical interfaces (support 1000 Mbit/s SFP/10 Gbit/s SFP+
optical modules)
Dual AC/DC power supplies
ISCOM2648G-4C-A Telecom MAN access Ethernet switch
C_DC Forty-eight 10/100/1000 Mbit/s Ethernet electrical interfaces
4 SFP+ 10GE optical interfaces (support 1000 Mbit/s SFP/10 Gbit/s SFP+
optical modules)
Dual power supplies, one AC + one DC
ISCOM2648G-4GE- Telecom MAN access Ethernet switch
AC/DC Forty-eight 10/100/1000 Mbit/s Ethernet electrical interfaces
4 Combo interfaces (4 optical interfaces which support 100/1000 Mbit/s SFP
optical modules and four 10/100/1000 Mbit/s electrical interfaces)
Single AC/DC power supply
ISCOM2648G-4GE- Telecom MAN access Ethernet switch
RPS-AC Forty-eight 10/100/1000 Mbit/s Ethernet electrical interfaces
4 Combo interfaces (4 optical interfaces which support 100/1000 Mbit/s SFP
optical modules and four 10/100/1000 Mbit/s electrical interfaces)
Single 220 VAC power supply, one 12 V input RPS interface which can be
connected to an additionally purchased RPS for power backup
ISCOM2608G-2GE- Telecom MAN access Ethernet switch
AC/DC Eight 10/100/1000M Ethernet electrical interfaces
2 Combo interfaces (2 optical interfaces which support 100/1000 Mbit/s SFP
optical modules and two 10/100/1000 Mbit/s electrical interfaces)
1 SNMP interface
Single AC/DC power supply
ISCOM2608G-2GE- Layer 2 Ethernet switch
PWR-AC/DC Eight 10/100/1000 Mbit/s electrical interfaces (IEEE
802.3af/802.3at-compliant)
2 Combo interfaces (2 optical interfaces which support 100/1000 Mbit/s SFP
optical modules and two 10/100/1000 Mbit/s electrical interfaces)
Version A: single AC/DC power supply