quotation item

08170436-01 - 2.02

technical data page 1 designation

MXE
Liste 17_1 80Grad date
5/2/2018 / yws
fan type FK serial no. comm. no.
MXE045-026530-00 -
your order no. type of control codeword
- valve -

fan type MXE045-026530-00 OP 1* units acc. to

type of connection ducted customer's specification
operating condition inlet operation
handled gas clean air
designated volume flow 275 m³/min 16500 m³/h
designated static pressure increase 400 daPa 4000 Pa
humidity 0 g/kg 0 g/kg
gas constant R 287 J/(kg K) 287 J/(kg K)
coefficient of adiabatic compressibility Kappa K 1.4 - 1.4 -
inlet temperature t1 20 °C 20 °C
discharge temperature t2 24 °C 24 °C
altitude h 0 m 0 m
abs. atmos. pressure P0 101.33 kPa 101.33 kPa
athmos. density ρ0 1.205 kg/m³ 1.205 kg/m³
density at inlet ρ1 1.157 kg/m³ 1.157 kg/m³
volume flow V1 275 m³/min 16500 m³/h
total pressure increase Δpt 421 daPa 4205 Pa
dynamic pressure pd2 46 daPa 464 Pa
dynamic pressure pd1 48 daPa 481 Pa
static pressure increase Δpst 422 daPa 4222 Pa
shaft power PW 24.1 kW 24.1 kW
impeller speed nI 2950 rpm 2950 rpm
rec. motor power PM 45 kW 45 kW
motor synchronous speed nM 2960 rpm 2960 rpm
tip speed u2 93 m/s 93 m/s

C-weighted meas.surf.sound pressure level at 1m distance with

both sides ducted LpCm 81 dB(C)
free inlet LpC5 101 dB(C)
free discharge LpC6 101 dB(C)
A-weighted total sound power level
inlet LwAi1 105 dB(A)
discharge LwAi2 105 dB(A)
correct.value A-weight.dB(A) dLkA 7 dB(A)
A-weighted meas.surf.sound pressure level at 1m distance with
both sides ducted LpAm 75 dB(A)
free inlet LpA5 95 dB(A)
free discharge LpA6 95 dB(A)
superficial dimension Ls-k 16 dB
characteristic curve type Δp/Pw 6/6 -
efficiency at total pressure increase ηtot 79.9 %
efficiency at static pressure increase ηstat 80.2 %

* BP 1 : BP1

DN1 SFV1.0 EV1.0 RE1.0 AKZ1.0 AKZ2.0 AKZ1.1 2.2.0.86

Tolerances dependent on class of accuracy in accordance to DIN 24166 in range of efficiency class of accuracy 1 2 3
η >= 0,9 x ηmax.. Coordination for class of accuracy (G.Kl.) see product specification. Δpt und V1 [ %] +/- 2,5 +/- 5 +/- 10
At any rate, please pay attention to the techn. indications made in our Handbook of fans. PW [ %] +3 +8 + 16
pressure units : 1 daPa = 10 Pa = 10 N/m² = 0,1 mbar = 1,0197 mmWC Lw und Lp [dB] +3 +4 +6
 quotation item
08170436-01 - 2.02

technical data page 2 designation

MXE
Liste 17_1 80Grad date
5/2/2018 / yws
fan type FK serial no. comm. no.
MXE045-026530-00 -
your order no. type of control codeword
- valve -

housing data

inlet size Aø 450 mm

discharge size B1 450 mm
discharge size B2 355 mm
diffusor B1' - mm
diffusor B2' - mm
length of suction box AN - mm
width of suction box BN - mm
thickness of fan housing sGV 4 mm
section thickness sSP 3 mm

impeller data

impeller outer diameter D2 618 mm

blade diameter D2S 603 mm
no. of blades z 9 -
intermediate blades z' - -
massmoment of inertia of impeller ILr 2.342 kgm²
shaft diameter dW 0 mm
massmoment of inertia of shaft IW 0 kgm²

boundary conditions

design temperature tB 20 °C
max. opertaing temperature tmax 80 °C
max.impeller speed nVmax 3127 1/min
inlet speed c1 28.8 m/s
inlet speed AK c1' - m/s
outlet speed c2 27.9 m/s
outlet speed DIF c2' - m/s

weight specification Typ

fan without motor MXE 232 kg

motor 1TZ9503-2BA23-4AB4 315 kg
total weight * 547 kg

DN1 SFV1.0 EV1.0 RE1.0 AKZ1.0 AKZ2.0 AKZ1.1 2.2.0.86

Tolerances dependent on class of accuracy in accordance to DIN 24166 in range of efficiency class of accuracy 1 2 3
η >= 0,9 x ηmax.. Coordination for class of accuracy (G.Kl.) see product specification. Δpt und V1 [ %] +/- 2,5 +/- 5 +/- 10
At any rate, please pay attention to the techn. indications made in our Handbook of fans. PW [ %] +3 +8 + 16
pressure units : 1 daPa = 10 Pa = 10 N/m² = 0,1 mbar = 1,0197 mmWC Lw und Lp [dB] +3 +4 +6
 quotation item
08170436-01 - 2.02
FAN CHARACTERISTIC CURVE designation
MXE
Liste 17_1 80Grad date
5/2/2018 / yws
fan type FK serial no. comm. no.
MXE045-026530-00 -
your order no. type of control codeword
- valve -
pressure increase in daPa
550

500

450
OP1
400

350

300

250

200

Δp stat
150 Δp tot

100

50

0
0 50 100 150 200 250 300 350 400 450
volume flow V1 In m³/min
power requirement PW in kW efficiency in %
30 100

PW 90
25 OP1
80

70
20
60

15 50

η tot 40
10
30

20
5
10

0 0
0 50 100 150 200 250 300 350 400 450
volume flow V1 In m³/min

NP OP 1 OP 2 OP 3 OP 4 OP 5 OP 6
volume flow V1 m³/min 275
total pressure increase Δpt daPa 421
density at inlet ρ1 kg/m³ 1.157
impeller speed nI rpm 2950
inletguidevane/damp.

DN1 SFV1.0 EV1.0 RE1.0 AKZ1.0 AKZ2.0 AKZ1.1 2.2.0.86

Tolerances dependent on class of accuracy in accordance to DIN 24166 in range of efficiency class of accuracy 1 2 3
η >= 0,9 x ηmax.. Coordination for class of accuracy (G.Kl.) see product specification. Δpt und V1 [ %] +/- 2,5 +/- 5 +/- 10
At any rate, please pay attention to the techn. indications made in our Handbook of fans. PW [ %] +3 +8 + 16
pressure units : 1 daPa = 10 Pa = 10 N/m² = 0,1 mbar = 1,0197 mmWC Lw und Lp [dB] +3 +4 +6
 quotation item
08170436-01 - 2.02

MOTOR DATA / START-UP designation

MXE
Liste 17_1 80Grad date
5/2/2018 / yws
fan type FK serial no. comm. no.
MXE045-026530-00 -
your order no. type of control codeword
- valve -

The following data apply to the fan nominal point.

Start-up data
rated output motor torque 145.0 Nm
torque Υ 94.0 Nm
torque Δ 348.0 Nm
load torque in NP 80.1 Nm
load torque closed damper 40.0 Nm
moment of inertia relative to nM 2.4 kgm²
start-up time in NP Υ 12.2 s
start-up time closed damper Υ 9.7 s
start-up time in NP Δ 2.4 s
start-up time closed damper Δ 2.3 s
theoretical starting time 3.1 s

Δ-start-up possible (DOL start-up)

YΔ-start-up possible (star-delta start-up)

Drive power is sufficient. Please take into consideration the start-up times depending on the starting type Δ-
or YΔ of the motor. Have the start-up behaviour checked and approved by the motor producer if a certain
number of cold start-ups or restarts are required

DN1 SFV1.0 EV1.0 RE1.0 AKZ1.0 AKZ2.0 AKZ1.1 2.2.0.86

Tolerances dependent on class of accuracy in accordance to DIN 24166 in range of efficiency class of accuracy 1 2 3
η >= 0,9 x ηmax.. Coordination for class of accuracy (G.Kl.) see product specification. Δpt und V1 [ %] +/- 2,5 +/- 5 +/- 10
At any rate, please pay attention to the techn. indications made in our Handbook of fans. PW [ %] +3 +8 + 16
pressure units : 1 daPa = 10 Pa = 10 N/m² = 0,1 mbar = 1,0197 mmWC Lw und Lp [dB] +3 +4 +6