Scribd
Upload
7 views

AM & DM

The document describes a MATLAB script for amplitude modulation (AM) and demodulation. It generates modulating and carrier signals, applies modulation with varying message amplitudes, and visualizes the results through plots. The script also includes a Butterworth filter to demodulate the signals and display the demodulated outputs.

Uploaded by

harshavardhanyelamanchili007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
7 views

AM & DM

The document describes a MATLAB script for amplitude modulation (AM) and demodulation. It generates modulating and carrier signals, applies modulation with varying message amplitudes, and visualizes the results through plots. The script also includes a Butterworth filter to demodulate the signals and display the demodulated outputs.

Uploaded by

harshavardhanyelamanchili007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

AM modulation & demodulation

close all;
clear all;
clc;
fs=8000; %SAMPLE FREQUENCY
fm=20; %THREE MESSAGE SIGNAL FREQUENCY
fc=500; %CARRIER FREQUENCY
Am=1; %MESSAGE AMPLITUDE
Ac=1; %CARRIER AMPLITUDE
t=[0:0.1*fs]/fs; %TIME DURATION
m=Am*cos(2*pi*fm*t);
c=Ac*cos(2*pi*fc*t);
ka=0.5;
u=ka*Am;
s1=Ac*(1+u*cos(2*pi*fm*t)).*cos(2*pi*fc*t);
subplot(4,3,1:3);
plot(t,m);
title('Modulating or Message signal(fm=20Hz)');
subplot(4,3,4:6);
plot(t,c);
title('Carrier signal(fc=500Hz)');
subplot(4,3,7);
plot(t,s1);
title('Under Mod signal');
Am=2;
ka=0.5;
u=ka*Am;
s2=Ac*(1+u*cos(2*pi*fm*t)).*cos(2*pi*fc*t);
subplot(4,3,8);
plot(t,s2);
title('Exact Mod signal');
Am=5;
ka=0.5;
u=ka*Am;
s3=Ac*(1+u*cos(2*pi*fm*t)).*cos(2*pi*fc*t);
subplot(4,3,9);
plot(t,s3);
title('Over Mod signal');
r1=s1.*c;
[b a]=butter(1,0.01); %BUTTERWORTH FILTER
mr1=filter(b,a,r1); %DEPTH OF MODULATION
subplot(4,3,10);
plot(t,mr1);
title('DeModulated signal');
r2=s2.*c;
[b a]=butter(1,0.01);
mr2=filter(b,a,r2);
subplot(4,3,11);
plot(t,mr2);
title('DeModulated signal');
r3=s3.*c;
[b a]=butter(1,0.01);
mr3=filter(b,a,r3);
subplot(4,3,12);
plot(t,mr3);
title('DeModulated signal');

You might also like