Page: 1
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:12
SYSTEM DATA
00.01: Language: English
00.02: Password: ********
00.03: Sys Fn Links: 0
00.04: Description: MiCOMho P443
00.05: Plant Reference: 400kV SEBETAII
00.06: Model Number: P443312B3M0710M
00.08: Serial Number: 128696U
00.09: Frequency: 50 Hz
00.0A: Comms Level: 2
00.0B: Relay Address: 1
00.0C: Plant Status: 0000000000000010
00.0D: Control Status: 0000000000000000
00.0E: Active Group: 1
00.10: CB Trip/Close: No Operation
00.11: Software Ref. 1: P443____3A_710_A
00.20: Opto I/P Status: 001010100010000000111010
00.21: Relay O/P Status: 00000000000000100000000000000000
00.22: Alarm Status 1: 00000000000000000000000000000000
00.50: Alarm Status 1: 00000000000000000000000000000000
00.51: Alarm Status 2: 00000000000000000000000000000000
00.52: Alarm Status 3: 00000000000000000000000000000001
00.D0: Access Level: 3
00.D2: Password Level 1: ********
00.D3: Password Level 2: ********
00.D4: Password Level 3: ********
00.DF: Security Feature: 1
CB CONTROL
07.01: CB Control by: Local
07.02: Close Pulse Time: 200.0 ms
07.03: Trip Pulse Time: 200.0 ms
07.05: Man Close Delay: 10.00 s
07.06: CB Healthy Time: 5.000 s
07.07: Check Sync Time: 5.000 s
07.08: CB mon LO reset: No
07.09: Rst CB mon LO by: User Interface
07.0B: Autoreclose Mode: No Operation
07.0E: AR Status: In Service
07.11: CB Status Input: 52A 1 pole
07.7F: CB Status Time: 5.000 s
07.82: Reset AROK Ind: No
07.83: Reset CB LO: No
07.85: CB Total Shots: 73
07.86: CB SUCC SPAR: 5
07.87: CB SUCC3PARShot1: 3
07.88: CB SUCC3PARShot2: 0
07.89: CB SUCC3PARShot3: 0
07.8A: CB SUCC3PARShot4: 0
07.8B: CB Failed Shots: 59
07.8C: Reset CB Shots: No
07.96: Res AROK by UI: Enabled
07.97: Res AROK by NoAR: Enabled
07.98: Res AROK by Ext: Enabled
07.99: Res AROK by TDly:Enabled
07.9A: Res AROK by TDly:1.000 s
07.9B: Res LO by CB IS: Enabled
07.9C: Res LO by UI: Enabled
07.9D: Res LO by NoAR: Enabled
07.9E: Res LO by ExtDDB:Enabled
07.9F: Res LO by TDelay: Enabled
07.A0: LO Reset Time: 1.000 s
MiCOM S1 Agile
Page: 2
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
DATE AND TIME
08.01: Date/Time: 2022-09-02 08:34:26.103
08.04: IRIG-B Sync: Enabled
08.06: Battery Status: Dead
08.07: Battery Alarm: Enabled
08.20: LocalTime Enable: Disabled
CONFIGURATION
09.01: Restore Defaults: No Operation
09.02: Setting Group: Select via Menu
09.03: Active Settings: Group 1
09.04: Save Changes: No Operation
09.05: Copy From: Group 1
09.06: Copy To: No Operation
09.07: Setting Group 1: Enabled
09.08: Setting Group 2: Disabled
09.09: Setting Group 3: Disabled
09.0A: Setting Group 4: Disabled
09.0B: Distance: Enabled
09.0C: Directional E/F: Enabled
09.10: Overcurrent: Enabled
09.11: Neg Sequence O/C: Disabled
09.12: Broken Conductor: Disabled
09.13: Earth Fault: Enabled
09.15: SEF/REF Prot'n: Disabled
09.16: Residual O/V NVD: Disabled
09.17: Thermal Overload: Disabled
09.18: PowerSwing Block: Enabled
09.1D: Volt Protection: Enabled
09.1E: Freq Protection: Disabled
09.1F: df/dt Protection: Disabled
09.20: CB Fail: Disabled
09.21: Supervision: Enabled
09.23: System Checks: Enabled
09.24: Auto-Reclose: Enabled
09.25: Input Labels: Invisible
09.26: Output Labels: Invisible
09.28: CT & VT Ratios: Visible
09.29: Record Control: Visible
09.2A: Disturb Recorder: Visible
09.2B: Measure't Setup: Visible
09.2C: Comms Settings: Visible
09.2D: Commission Tests: Visible
09.2E: Setting Values: Secondary
09.2F: Control Inputs: Invisible
09.35: Ctrl I/P Config: Invisible
09.36: Ctrl I/P Labels: Invisible
09.39: Direct Access: Disabled
09.50: Function Key: Visible
09.FB: RP1 Read Only: Disabled
09.FF: LCD Contrast: 11
CT AND VT RATIOS
0A.01: Main VT Primary: 400.0 kV
0A.02: Main VT Sec'y: 100.0 V
0A.03: CS VT Primary: 400.0 kV
0A.04: CS VT Secondary: 100.0 V
0A.07: Phase CT Primary: 1600 A
0A.08: Phase CT Sec'y: 1.000 A
0A.0B: SEF CT Primary: 1600 A
0A.0C: SEF CT Secondary:1.000 A
0A.0D: MComp CT Primary: 1.000 A
0A.0E: MComp CT Sec'y: 1.000 A
MiCOM S1 Agile
Page: 3
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
0A.0F: CS Input: AN
0A.10: Main VT Location: Line
0A.11: CT Polarity: Standard
0A.13: SEF CT Polarity: Standard
0A.14: M CT Polarity: Standard
0A.21: CS VT Ph Shift: 0 deg
0A.22: CS VT Mag: 1.000
RECORD CONTROL
0B.04: Alarm Event: Enabled
0B.05: Relay O/P Event: Enabled
0B.06: Opto Input Event: Enabled
0B.07: General Event: Enabled
0B.08: Fault Rec Event: Enabled
0B.09: Maint Rec Event: Enabled
0B.0A: Protection Event: Enabled
0B.40: DDB 31 - 0: 11111111111111111111111111111111
0B.41: DDB 63 - 32: 11111111111111111111111111111111
0B.42: DDB 95 - 64: 11111111111111111111111111111111
0B.43: DDB 127 - 96: 11111111111111111111111111111111
0B.44: DDB 159 - 128: 11111111111111111111111111111111
0B.45: DDB 191 - 160: 11111111111111111111111111111111
0B.46: DDB 223 - 192: 11111111111111111111111111111111
0B.47: DDB 255 - 224: 11111111111111111111111111111111
0B.48: DDB 287 - 256: 11111111111111111111111111111111
0B.49: DDB 319 - 288: 11111111111111111111111111111111
0B.4A: DDB 351 - 320: 11111111111111111111111111111111
0B.4B: DDB 383 - 352: 11111111111111111111111111111111
0B.4C: DDB 415 - 384: 11111111111111111111111111111111
0B.4D: DDB 447 - 416: 11111111111111111111111111111111
0B.4E: DDB 479 - 448: 11111111111111111111111111111111
0B.4F: DDB 511 - 480: 11111111111111111111111111111111
0B.50: DDB 543 - 512: 11111111111111111111111111111111
0B.51: DDB 575 - 544: 11111111111111111111111111111111
0B.52: DDB 607 - 576: 11111111111111111111111111111111
0B.53: DDB 639 - 608: 11111111111111111111111111111111
0B.54: DDB 671 - 640: 11111111111111111111111111111111
0B.55: DDB 703 - 672: 11111111111111111111111111111111
0B.56: DDB 735 - 704: 11111111111111111111111111111111
0B.57: DDB 767 - 736: 11111111111111111111111111111111
0B.58: DDB 799 - 768: 11111111111111111111111111111111
0B.59: DDB 831 - 800: 11111111111111111111111111111111
0B.5A: DDB 863 - 832: 11111111111111111111111111111111
0B.5B: DDB 895 - 864: 11110111111111111111111111111111
0B.5C: DDB 927 - 896: 11111111111111111111111111111111
0B.5D: DDB 959 - 928: 11111111111111111111111111111111
0B.5E: DDB 991 - 960: 11111111111111111111111111111111
0B.5F: DDB 1023 - 992: 11111111111111111111111111111111
0B.60: DDB 1055 - 1024: 11111111111111111111111111111111
0B.61: DDB 1087 - 1056: 11111111111111111111111111111111
0B.62: DDB 1119 - 1088: 11111111111111111111111111111111
0B.63: DDB 1151 - 1120: 11111111111111111111111111111111
0B.64: DDB 1183 - 1152: 11111111111111111111111111111111
0B.65: DDB 1215 - 1184: 11111111111111111111111111111111
0B.66: DDB 1247 - 1216: 11111111111111111111111111111111
0B.67: DDB 1279 - 1248: 11111111111111111111111111111111
0B.68: DDB 1311 - 1280: 11111111111111111111111111111111
0B.69: DDB 1343 - 1312: 11111111111111111111111111111111
0B.6A: DDB 1375 - 1344: 11111111111111111111111111111111
0B.6B: DDB 1407 - 1376: 11111111111111111111111111111111
0B.6C: DDB 1439 - 1408: 11111111111111111111111111111111
0B.6D: DDB 1471 - 1440: 11111111111111111111111111111111
MiCOM S1 Agile
Page: 4
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
0B.6E: DDB 1503 - 1472: 11111111111111111111111111111111
0B.6F: DDB 1535 - 1504: 11111111111111111111111111111111
0B.70: DDB 1567 - 1536: 11111111111111111111111111111111
0B.71: DDB 1599 - 1568: 11111111111111111111111111111111
0B.72: DDB 1631 - 1600: 11111111111111111111111111111111
0B.73: DDB 1663 - 1632: 11111111111111111111111111111111
0B.74: DDB 1695 - 1664: 11111111111111111111111111111111
0B.75: DDB 1727 - 1696: 11111111111111111111111111111111
0B.76: DDB 1759 - 1728: 11111111111111111111111111111111
0B.77: DDB 1791 - 1760: 11111111111111111111111111111111
0B.78: DDB 1823 - 1792: 11111111111111111111111111111111
0B.79: DDB 1855 - 1824: 11111111111111111111111111111111
0B.7A: DDB 1887 - 1856: 11111111111111111111111111111111
0B.7B: DDB 1919 - 1888: 11111111111111111111111111111111
0B.7C: DDB 1951 - 1920: 11111111111111111111111111111111
0B.7D: DDB 1983 - 1952: 11111111111111111111111111111111
0B.7E: DDB 2015 - 1984: 11111111111111111111111111111111
0B.7F: DDB 2047 - 2016: 11111111111111111111111111111111
DISTURB RECORDER
0C.01: Duration: 1.500 s
0C.02: Trigger Position: 33.30 %
0C.03: Trigger Mode: Single
0C.04: Analog Channel 1: VA
0C.05: Analog Channel 2: VB
0C.06: Analog Channel 3: VC
0C.07: Analog Channel 4: IA
0C.08: Analog Channel 5: IB
0C.09: Analog Channel 6: IC
0C.0A: Analog Channel 7: IN
0C.0B: Analog Channel 8: IN Sensitive
0C.0C: Digital Input 1: Relay 1
0C.0D: Input 1 Trigger: No Trigger
0C.0E: Digital Input 2: Relay 2
0C.0F: Input 2 Trigger: No Trigger
0C.10: Digital Input 3: Any Trip
0C.11: Input 3 Trigger: Trigger L/H
0C.12: Digital Input 4: Relay 4
0C.13: Input 4 Trigger: No Trigger
0C.14: Digital Input 5: Relay 5
0C.15: Input 5 Trigger: No Trigger
0C.16: Digital Input 6: Relay 6
0C.17: Input 6 Trigger: No Trigger
0C.18: Digital Input 7: Relay 7
0C.19: Input 7 Trigger: No Trigger
0C.1A: Digital Input 8: Relay 8
0C.1B: Input 8 Trigger: No Trigger
0C.1C: Digital Input 9: Relay 9
0C.1D: Input 9 Trigger: No Trigger
0C.1E: Digital Input 10: Relay 10
0C.1F: Input 10 Trigger: No Trigger
0C.20: Digital Input 11: Opto 12
0C.21: Input 11 Trigger: No Trigger
0C.22: Digital Input 12: Relay 12
0C.23: Input 12 Trigger: No Trigger
0C.24: Digital Input 13: Opto 14
0C.25: Input 13 Trigger: No Trigger
0C.26: Digital Input 14: Relay 14
0C.27: Input 14 Trigger: No Trigger
0C.28: Digital Input 15: Relay 15
0C.29: Input 15 Trigger: No Trigger
0C.2A: Digital Input 16: Relay 16
MiCOM S1 Agile
Page: 5
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
0C.2B: Input 16 Trigger: No Trigger
0C.2C: Digital Input 17: Opto 15
0C.2D: Input 17 Trigger: No Trigger
0C.2E: Digital Input 18: Relay 18
0C.2F: Input 18 Trigger: No Trigger
0C.30: Digital Input 19: Relay 19
0C.31: Input 19 Trigger: No Trigger
0C.32: Digital Input 20: Relay 20
0C.33: Input 20 Trigger: No Trigger
0C.34: Digital Input 21: Relay 21
0C.35: Input 21 Trigger: No Trigger
0C.36: Digital Input 22: Relay 22
0C.37: Input 22 Trigger: No Trigger
0C.38: Digital Input 23: Opto 4
0C.39: Input 23 Trigger: No Trigger
0C.3A: Digital Input 24: Opto 5
0C.3B: Input 24 Trigger: No Trigger
0C.3C: Digital Input 25: Opto 6
0C.3D: Input 25 Trigger: No Trigger
0C.3E: Digital Input 26: Opto 7
0C.3F: Input 26 Trigger: No Trigger
0C.40: Digital Input 27: Opto 9
0C.41: Input 27 Trigger: No Trigger
0C.42: Digital Input 28: Relay 28
0C.43: Input 28 Trigger: No Trigger
0C.44: Digital Input 29: Relay 29
0C.45: Input 29 Trigger: No Trigger
0C.46: Digital Input 30: Opto 10
0C.47: Input 30 Trigger: No Trigger
0C.48: Digital Input 31: Opto 15
0C.49: Input 31 Trigger: No Trigger
0C.4A: Digital Input 32: Opto 16
0C.4B: Input 32 Trigger: No Trigger
0C.50: Analog Channel 9: V Checksync
0C.51: Analog Channel10: IM
0C.52: Analog Channel11: Max Ih(2)
0C.70: Digital Input 33: Unused
0C.71: Digital Input 34: Unused
0C.72: Digital Input 35: Unused
0C.73: Digital Input 36: Unused
0C.74: Digital Input 37: Unused
0C.75: Digital Input 38: Unused
0C.76: Digital Input 39: Unused
0C.77: Digital Input 40: Unused
0C.78: Digital Input 41: Unused
0C.79: Digital Input 42: Unused
0C.7A: Digital Input 43: Unused
0C.7B: Digital Input 44: Unused
0C.7C: Digital Input 45: Unused
0C.7D: Digital Input 46: Unused
0C.7E: Digital Input 47: Unused
0C.7F: Digital Input 48: Unused
0C.80: Digital Input 49: Unused
0C.81: Digital Input 50: Unused
0C.82: Digital Input 51: Unused
0C.83: Digital Input 52: Unused
0C.84: Digital Input 53: Unused
0C.85: Digital Input 54: Unused
0C.86: Digital Input 55: Unused
0C.87: Digital Input 56: Unused
0C.88: Digital Input 57: Unused
MiCOM S1 Agile
Page: 6
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
0C.89: Digital Input 58: Unused
0C.8A: Digital Input 59: Unused
0C.8B: Digital Input 60: Unused
0C.8C: Digital Input 61: Unused
0C.8D: Digital Input 62: Unused
0C.8E: Digital Input 63: Unused
0C.8F: Digital Input 64: Unused
MEASURE'T SETUP
0D.02: Local Values: Primary
0D.03: Remote Values: Primary
0D.04: Measurement Ref: VA
0D.05: Measurement Mode: 0
0D.06: Fix Dem Period: 30.00 min
0D.07: Roll Sub Period: 30.00 min
0D.08: Num Sub Periods: 1
0D.09: Distance Unit: Miles
0D.0A: Fault Location: Distance
COMMISSION TESTS
0F.01: Opto I/P Status: 001010100010000000111010
0F.02: Relay O/P Status: 00000000000000100000000000000000
0F.03: Test Port Status: 00000000
0F.05: Monitor Bit 1: 1060
0F.06: Monitor Bit 2: 1062
0F.07: Monitor Bit 3: 1064
0F.08: Monitor Bit 4: 1066
0F.09: Monitor Bit 5: 1068
0F.0A: Monitor Bit 6: 1070
0F.0B: Monitor Bit 7: 1072
0F.0C: Monitor Bit 8: 1074
0F.0D: Test Mode: Disabled
0F.0E: Test Pattern: 00000000000000000000000000000000
0F.0F: Contact Test: No Operation
0F.10: Test LEDs: No Operation
0F.11: Test Autoreclose: No Operation
0F.12: Static Test: Disabled
0F.13: Test Loopback: Disabled
0F.14: IM64 TestPattern: 0000000000000000
0F.15: IM64 Test Mode: Disabled
0F.1A: Red LED Status: 000001000000000000
0F.1B: Green LED Status: 000110000100000000
0F.20: DDB 31 - 0: 00000000000000100000000000000000
0F.21: DDB 63 - 32: 00000000001010100010000000111010
0F.22: DDB 95 - 64: 00000000000000000000000000000000
0F.23: DDB 127 - 96: 00000000000000000000000000000000
0F.24: DDB 159 - 128: 00000000000000100000000000000000
0F.25: DDB 191 - 160: 00000000000000000000000000000000
0F.26: DDB 223 - 192: 00000000000000000000000000000000
0F.27: DDB 255 - 224: 00000000000000000000000000000000
0F.28: DDB 287 - 256: 00000000000000000000000000000000
0F.29: DDB 319 - 288: 00000000000000000000000000000000
0F.2A: DDB 351 - 320: 00000000000000000000000000000000
0F.2B: DDB 383 - 352: 00000000000000000000000000000001
0F.2C: DDB 415 - 384: 00000000000000000110110000000000
0F.2D: DDB 447 - 416: 00000000000100000000000011100000
0F.2E: DDB 479 - 448: 00000000000000000000000000000000
0F.2F: DDB 511 - 480: 00000000000000000000000000000000
0F.30: DDB 543 - 512: 00000000000000000000000000000000
0F.31: DDB 575 - 544: 10000000000000111000000000000000
0F.32: DDB 607 - 576: 00000000000000000000000000000000
0F.33: DDB 639 - 608: 00000000000000000000000000000000
0F.34: DDB 671 - 640: 00000000000000000000000000000000
MiCOM S1 Agile
Page: 7
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
0F.35: DDB 703 - 672: 00000000000000000000000000000000
0F.36: DDB 735 - 704: 00000000000000000000000000000000
0F.37: DDB 767 - 736: 00000000000000000000000000000000
0F.38: DDB 799 - 768: 00000000000000000000000000000000
0F.39: DDB 831 - 800: 00000000000000000000000000000000
0F.3A: DDB 863 - 832: 00000000000000000100000000000000
0F.3B: DDB 895 - 864: 00000001010011100000001000000111
0F.3C: DDB 927 - 896: 00000000000000000111100000010100
0F.3D: DDB 959 - 928: 00000000000000000000000000000000
0F.3E: DDB 991 - 960: 00000000000000000000000000000000
0F.3F: DDB 1023 - 992: 00000000000000000000000000000000
0F.40: DDB 1055 - 1024: 00101001000000100000000000000000
0F.41: DDB 1087 - 1056: 10010000001000000000000000000000
0F.42: DDB 1119 - 1088: 00000000000000000000000000000000
0F.43: DDB 1151 - 1120: 00000000000000000000000000000000
0F.44: DDB 1183 - 1152: 00011101000000000000000000000000
0F.45: DDB 1215 - 1184: 00000000000000000000100100000000
0F.46: DDB 1247 - 1216: 00000000000000000000000000000000
0F.47: DDB 1279 - 1248: 00000000000000000000000000000000
0F.48: DDB 1311 - 1280: 00000000000011100000000000000000
0F.49: DDB 1343 - 1312: 00000000000000000000000000000000
0F.4A: DDB 1375 - 1344: 00000000000000000000010000000000
0F.4B: DDB 1407 - 1376: 00000000000000000000001000000000
0F.4C: DDB 1439 - 1408: 00000000000000000000000000000000
0F.4D: DDB 1471 - 1440: 00000000000000000000000000000000
0F.4E: DDB 1503 - 1472: 00000110000000000000000000000000
0F.4F: DDB 1535 - 1504: 00000000010000000000010000000000
0F.50: DDB 1567 - 1536: 00000000000000000000000000000000
0F.51: DDB 1599 - 1568: 00000000000000000000100001100000
0F.52: DDB 1631 - 1600: 00000000000000000000001000000000
0F.53: DDB 1663 - 1632: 00000000000000000000000000000000
0F.54: DDB 1695 - 1664: 00000000000000000000000000000000
0F.55: DDB 1727 - 1696: 00000000000000000000000000000000
0F.56: DDB 1759 - 1728: 00000000000000000000000000000000
0F.57: DDB 1791 - 1760: 00000000000000000000000000000000
0F.58: DDB 1823 - 1792: 00000000000000000000000000000000
0F.59: DDB 1855 - 1824: 00000000000000000000000000000000
0F.5A: DDB 1887 - 1856: 00000000000000000000000000000000
0F.5B: DDB 1919 - 1888: 00000000000000000000000000000000
0F.5C: DDB 1951 - 1920: 00000000000000000000000000000000
0F.5D: DDB 1983 - 1952: 00000000000000000000000000000000
0F.5E: DDB 2015 - 1984: 00000000000000000000000000000000
0F.5F: DDB 2047 - 2016: 00000000000000000000000000000000
CB MONITOR SETUP
10.01: Broken I^: 2.000
10.02: I^ Maintenance: Alarm Disabled
10.04: I^ Lockout: Alarm Disabled
10.06: No. CB Ops Maint: Alarm Disabled
10.08: No. CB Ops Lock: Alarm Disabled
10.0A: CB Time Maint: Alarm Enabled
10.0B: CB Time Maint: 100.0 ms
10.0C: CB Time Lockout: Alarm Disabled
10.0E: Fault Freq Lock: Alarm Disabled
OPTO CONFIG
11.01: Global Nominal V: 24/27V
11.60: Opto Filter Cntl: 111111111011011111111011
11.80: Characteristic: Standard 60%-80%
CONTROL INPUTS
12.01: Ctrl I/P Status: 00000000000000000000000000000000
12.02: Control Input 1: No Operation
12.03: Control Input 2: No Operation
MiCOM S1 Agile
Page: 8
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
12.04: Control Input 3: No Operation
12.05: Control Input 4: No Operation
12.06: Control Input 5: No Operation
12.07: Control Input 6: No Operation
12.08: Control Input 7: No Operation
12.09: Control Input 8: No Operation
12.0A: Control Input 9: No Operation
12.0B: Control Input 10: No Operation
12.0C: Control Input 11: No Operation
12.0D: Control Input 12: No Operation
12.0E: Control Input 13: No Operation
12.0F: Control Input 14: No Operation
12.10: Control Input 15: No Operation
12.11: Control Input 16: No Operation
12.12: Control Input 17: No Operation
12.13: Control Input 18: No Operation
12.14: Control Input 19: No Operation
12.15: Control Input 20: No Operation
12.16: Control Input 21: No Operation
12.17: Control Input 22: No Operation
12.18: Control Input 23: No Operation
12.19: Control Input 24: No Operation
12.1A: Control Input 25: No Operation
12.1B: Control Input 26: No Operation
12.1C: Control Input 27: No Operation
12.1D: Control Input 28: No Operation
12.1E: Control Input 29: No Operation
12.1F: Control Input 30: No Operation
12.20: Control Input 31: No Operation
12.21: Control Input 32: No Operation
FUNCTION KEYS
17.01: Fn Key Status: 0000000000
17.02: Fn Key 1: Unlocked
17.03: Fn Key 1 Mode: Normal
17.04: Fn Key 1 Label: Function Key 1
17.05: Fn Key 2: Unlocked
17.06: Fn Key 2 Mode: Normal
17.07: Fn Key 2 Label: Function Key 2
17.08: Fn Key 3: Unlocked
17.09: Fn Key 3 Mode: Normal
17.0A: Fn Key 3 Label: Function Key 3
17.0B: Fn Key 4: Unlocked
17.0C: Fn Key 4 Mode: Normal
17.0D: Fn Key 4 Label: Function Key 4
17.0E: Fn Key 5: Unlocked
17.0F: Fn Key 5 Mode: Normal
17.10: Fn Key 5 Label: Function Key 5
17.11: Fn Key 6: Unlocked
17.12: Fn Key 6 Mode: Normal
17.13: Fn Key 6 Label: Function Key 6
17.14: Fn Key 7: Unlocked
17.15: Fn Key 7 Mode: Normal
17.16: Fn Key 7 Label: Function Key 7
17.17: Fn Key 8: Unlocked
17.18: Fn Key 8 Mode: Normal
17.19: Fn Key 8 Label: Function Key 8
17.1A: Fn Key 9: Unlocked
17.1B: Fn Key 9 Mode: Normal
17.1C: Fn Key 9 Label: Function Key 9
17.1D: Fn Key 10: Unlocked
17.1E: Fn Key 10 Mode: Normal
MiCOM S1 Agile
Page: 9
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:13
17.1F: Fn Key 10 Label: Function Key 10
SECURITY CONFIG
25.01: User Banner: ACCESS ONLY FOR AUTHORISED USERS
25.02: Attempts Limit: 3
25.03: Attempts Timer: 2
25.04: Blocking Timer: 5
25.11: Attempts Remain: 3
25.12: Blk Time Remain: 0
25.20: Fallbck PW level: 1
USER CURVES DATA
B8.01: Curve 1 Name: Default Curve 1
B8.02: Date/Time: 2012-04-26 07:59:59.812
B8.03: Curve 1 ID: 00003238
B8.04: UserCurve 1 Type: Operate 1.0
B8.11: Curve 2 Name: Default Curve 2
B8.12: Date/Time: 2012-04-26 07:59:59.834
B8.13: Curve 2 ID: 00002C32
B8.14: UserCurve 2 Type: Operate 1.0
B8.21: Curve 3 Name: Default Curve 3
B8.22: Date/Time: 2012-04-26 07:59:59.855
B8.23: Curve 3 ID: 0000D17E
B8.24: UserCurve 3 Type: Reset 1.1
B8.31: Curve 4 Name: Default Curve 4
B8.32: Date/Time: 2012-04-26 07:59:59.877
B8.33: Curve 4 ID: 00008A2D
B8.34: UserCurve 4 Type: Reset 1.1
B8.F0: Restore Def Crv: No Operation
Group 1
GROUP 1 LINE PARAMETERS
30.02: Line Length: 62.10 mi
30.03: Line Impedance: 4.340 Ohm
30.04: Line Angle: 87.00 deg
30.05: kZN Res Comp: 690.0e-3
30.06: kZN Res Angle: -13.00 deg
30.07: Mutual Comp: Disabled
30.0B: Phase Sequence: Standard ABC
30.0C: Tripping Mode: 1 and 3 Pole
30.10: Line Charging Y: 2.000 mS
GROUP 1 DISTANCE SETUP
31.0C: Setting Mode: Simple
31.10: PHASE DISTANCE:
31.11: Phase Chars.: Quad
31.12: Quad Resistance: Proportional
31.13: Fault Resistance: 10.00 Ohm
31.20: Zone 1 Ph Status: Enabled
31.21: Zone 1 Ph Reach: 80.00 %
31.30: Zone 2 Ph Status: Enabled
31.31: Zone 2 Ph Reach: 150.0 %
31.40: Zone 3 Ph Status: Enabled
31.41: Zone 3 Ph Reach: 220.0 %
31.42: Zone 3 Ph Dir.: Offset
31.43: Zone 3 Ph Offset: 10.00 %
31.50: Zone P Ph Status: Disabled
31.60: Zone 4 Ph Status: Disabled
31.70: GROUND DISTANCE:
31.71: Ground Chars.: Quad
31.72: Quad Resistance: Proportional
31.73: Fault Resistance: 15.00 Ohm
31.80: Zone 1 Gnd Stat.: Enabled
31.81: Zone 1 Gnd Reach:80.00 %
31.90: Zone 2 Gnd Stat.: Enabled
MiCOM S1 Agile
Page: 10
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:14
31.91: Zone 2 Gnd Reach:150.0 %
31.A0: Zone 3 Gnd Stat.: Enabled
31.A1: Zone 3 Gnd Reach: 220.0 %
31.A2: Zone 3 Gnd Dir.: Offset
31.A3: Zone3 Gnd Offset: 10.00 %
31.B0: Zone P Gnd Stat.: Disabled
31.C0: Zone 4 Gnd Stat.: Disabled
31.D0: Digital Filter: Standard
31.D1: CVT Filters: Passive
31.D2: SIR Setting: 30
31.D3: Load Blinders: Disabled
31.D7: Dist. Polarizing: 1.000
31.E0: DELTADIRECTIONAL:
31.E1: Dir. Status: Disabled
31.F0: DIST STUB BUS:
31.F1: Dist Stub Bus: Disabled
GROUP 1 DIST. ELEMENTS
32.01: PHASE DISTANCE:
32.02: Z1 Ph. Reach: 3.472 Ohm
32.03: Z1 Ph. Angle: 87.00 deg
32.07: R1 Ph. Resistive: 8.000 Ohm
32.08: Z1 Tilt Top Line: -3.000 deg
32.09: Z1 Sensit. Iph>1: 75.00 mA
32.10: Z2 Ph. Reach: 6.510 Ohm
32.11: Z2 Ph. Angle: 87.00 deg
32.15: R2 Ph. Resistive: 15.00 Ohm
32.16: Z2 Tilt Top Line: -3.000 deg
32.17: Z2 Sensit. Iph>2: 75.00 mA
32.20: Z3 Ph. Reach: 9.548 Ohm
32.21: Z3 Ph. Angle: 87.00 deg
32.22: Z3' Ph Rev Reach: 434.0 mOhm
32.25: R3 Ph. Resistive: 22.00 Ohm
32.26: R3' Ph. Res. Rev: 1.000 Ohm
32.27: Z3 Tilt Top Line: -3.000 deg
32.28: Z3 Sensit. Iph>3: 50.00 mA
32.50: GROUND DISTANCE:
32.51: Z1 Gnd. Reach: 3.472 Ohm
32.52: Z1 Gnd. Angle: 87.00 deg
32.53: Z1 Dynamic Tilt: Enabled
32.54: Z1 Tilt Top Line: -3.000 deg
32.55: kZN1 Res. Comp.: 690.0e-3
32.56: kZN1 Res. Angle: -13.00 deg
32.59: R1 Gnd Resistive: 12.00 Ohm
32.5B: Z1 Sensit Ignd>1: 75.00 mA
32.60: Z2 Gnd. Reach: 6.510 Ohm
32.61: Z2 Gnd. Angle: 87.00 deg
32.63: Z2 Dynamic Tilt: Enabled
32.64: Z2 Tilt Top Line: -3.000 deg
32.65: kZN2 Res. Comp.: 690.0e-3
32.66: kZN2 Res. Angle: -13.00 deg
32.69: R2 Gnd Resistive: 22.50 Ohm
32.6B: Z2 Sensit Ignd>2: 75.00 mA
32.70: Z3 Gnd. Reach: 9.548 Ohm
32.71: Z3 Gnd. Angle: 87.00 deg
32.72: Z3' Gnd Rev Rch: 434.0 mOhm
32.73: Z3 Dynamic Tilt: Enabled
32.74: Z3 Tilt Top Line: -3.000 deg
32.75: kZN3 Res. Comp.: 690.0e-3
32.76: kZN3 Res. Angle: -13.00 deg
32.79: R3 Gnd Resistive: 33.00 Ohm
32.7A: R3' Gnd Res. Rev: 1.500 Ohm
MiCOM S1 Agile
Page: 11
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:14
32.7C: Z3 Sensit Ignd>3: 50.00 mA
32.B0: Mem Volt Dura: 16
GROUP 1 SCHEME LOGIC
34.01: BASIC SCHEME:
34.02: BasicScheme Mode: Standard
34.08: Zone1 Tripping: Phase And Ground
34.09: tZ1 Ph. Delay: 0s
34.0A: tZ1 Gnd. Delay: 0s
34.10: Zone2 Tripping: Phase And Ground
34.11: tZ2 Ph. Delay: 400.0 ms
34.12: tZ2 Gnd. Delay: 400.0 ms
34.18: Zone3 Tripping: Phase And Ground
34.19: tZ3 Ph. Delay: 600.0 ms
34.1A: tZ3 Gnd. Delay: 600.0 ms
34.20: ZoneP Tripping: Disabled
34.28: Zone4 Tripping: Disabled
34.40: AIDED SCHEME 1:
34.41: Aid. 1 Selection: POR
34.42: Aid 1 Distance: Phase And Ground
34.43: Aid.1 Dist. Dly: 0s
34.44: Aid. 1 DEF: Enabled
34.45: Aid. 1 DEF Dly.: 0s
34.46: Aid. 1 DEF Trip: 1 and 3 Pole
34.47: Aid. 1 Delta: Disabled
34.4A: tRev. Guard: 20.00 ms
34.4C: Send On Trip: None
34.50: Weak Infeed: Disabled
34.60: AIDED SCHEME 2:
34.61: Aid. 2 Selection: Disabled
34.80: TRIP ON CLOSE:
34.81: SOTF Status: Enabled ExtPulse
34.83: SOTF Tripping: 011111
34.84: TOR Status: Enabled
34.85: TOR Tripping: 011111
34.86: TOC Reset Delay: 500.0 ms
34.87: SOTF Pulse: 10.00 s
34.88: TOC Delay: 200.0 ms
34.B0: Z1 EXTENSION:
34.B1: Z1 Ext Scheme: Disabled
34.C0: LOSS OF LOAD:
34.C1: LOL Scheme: Disabled
GROUP 1 OVERCURRENT
35.01: I>1 Status: Enabled
35.02: I>1 Function: IEC S Inverse
35.03: I>1 Directional: Directional Fwd
35.04: I>1 Current Set: 1.130 A
35.06: I>1 TMS: 200.0e-3
35.09: I>1 tRESET: 0s
35.0A: I>2 Status: Disabled
35.13: I>3 Status: Enabled
35.14: I>3 Directional: Directional Fwd
35.15: I>3 Current Set: 4.500 A
35.16: I>3 Time Delay: 400.0 ms
35.18: I>4 Status: Disabled
35.1C: I> Char Angle: 30.00 deg
35.1D: I> Blocking: 000000
GROUP 1 EARTH FAULT
38.01: IN>1 Status: Enabled
38.25: IN>1 Function: IEC S Inverse
38.26: IN>1 Directional: Directional Fwd
38.29: IN>1 Current Set: 80.00 mA
MiCOM S1 Agile
Page: 12
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:14
38.2D: IN>1 TMS: 375.0e-3
38.33: IN>1 tRESET: 0s
38.35: IN>2 Status: Disabled
38.46: IN>3 Status: Disabled
38.4D: IN>4 Status: Disabled
38.54: IN> Blocking: 000000
38.55: IN> DIRECTIONAL:
38.56: IN> Char Angle: -60.00 deg
38.57: IN> Polarisation: Zero Sequence
38.59: IN> VNpol Set: 5.000 V
GROUP 1 AIDED DEF
39.02: DEF Status: Enabled
39.03: DEF Polarizing: Zero Sequence
39.04: DEF Char. Angle: -60.00 deg
39.05: DEF VNpol Set: 2.000 V
39.07: DEF FWD Set: 100.0 mA
39.08: DEF REV Set: 40.00 mA
39.09: Virtual I Pol: Disabled
GROUP 1 POWER SWING BLK.
3D.01: PSB Status: Blocking
3D.03: Zone 1 Ph. PSB: Blocking
3D.05: Zone 2 Ph. PSB: Blocking
3D.07: Zone 3 Ph. PSB: Blocking
3D.09: Zone P Ph. PSB: Blocking
3D.0B: Zone 4 Ph. PSB: Blocking
3D.0D: Zone 1 Gnd. PSB: Blocking
3D.0F: Zone 2 Gnd. PSB: Blocking
3D.11: Zone 3 Gnd. PSB: Blocking
3D.13: Zone P Gnd. PSB: Blocking
3D.15: Zone 4 Gnd. PSB: Blocking
3D.16: WI Trip PSB: Inhibit Trip
3D.20: PSB Unblocking: Disabled
3D.22: PSB Reset Delay: 200.0 ms
3D.23: OST Mode: OST Disabled
3D.40: Slow Swing: Disabled
GROUP 1 VOLT PROTECTION
42.01: UNDER VOLTAGE:
42.02: V< Measur't Mode:V<1 & V<2 Ph-Ph
42.03: V< Operate Mode: V<1 & V<2 Any Ph
42.04: V<1 Function: Disabled
42.09: V<2 Status: Disabled
42.0D: OVERVOLTAGE:
42.0E: V> Measur't Mode:V>1 & V>2 Ph-Ph
42.0F: V> Operate Mode: V>1 & V>2 Any Ph
42.10: V>1 Function: IDMT
42.11: V>1 Voltage Set: 110.0 V
42.13: V>1 TMS: 1.000
42.14: V>2 Status: Disabled
42.20: COMP OVERVOLTAGE:
42.23: V1>1 Cmp Funct: Disabled
42.27: V1>2 Cmp Status: Disabled
GROUP 1 CB FAIL & P.DEAD
45.0A: UNDER CURRENT:
45.0B: I< Current Set: 100.0 mA
45.0D: ISEF< Current: 20.00 mA
45.0E: POLEDEAD VOLTAGE:
45.10: V<: 38.10 V
GROUP 1 SUPERVISION
46.01: VTS Mode: Measured Only
46.02: VTS Status: Blocking
46.03: VTS Reset Mode: Auto
MiCOM S1 Agile
Page: 13
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:14
46.04: VTS Time Delay: 5.000 s
46.05: VTS I> Inhibit: 5.000 A
46.06: VTS I2> Inhibit: 100.0 mA
46.0E: Inrush Detection: Disabled
46.10: WEAK INFEED BLK:
46.11: WI Inhibit: Disabled
46.30: CT SUPERVISION:
46.31: CTS Mode: Disabled
GROUP 1 SYSTEM CHECKS
48.14: VOLTAGE MONITORS:
48.85: Live Line: 52.00 V
48.86: Dead Line: 6.000 V
48.87: Live Bus: 52.00 V
48.88: Dead Bus:6.000 V
48.8B: CS UV: 52.00 V
48.8C: CS OV: 61.00 V
48.8D: System Checks: Enabled
48.8E: CS Voltage Block: V<
48.8F: CS1 Status: Enabled
48.90: CS1 Angle: 10.00 deg
48.91: CS1 VDiff: 3.000 V
48.92: CS1 Slip Ctrl: Enabled
48.93: CS1 SlipFreq: 110.0 mHz
48.94: CS2 Status: Disabled
48.B0: MAN SYS CHECKS:
48.B2: CBM SC required: Disabled
GROUP 1 AUTORECLOSE
49.51: AR Mode: AR Opto
49.59: AR Shots: 1
49.5A: AR Skip Shot 1: Enabled
49.5C: Multi Phase AR: Allow Autoclose
49.5D: Discrim Time: 500.0 ms
49.60: CB IS Time: 5.000 s
49.61: CB IS MemoryTime: 500.0 ms
49.62: DT Start by Prot: Protection Reset
49.63: 3PDTStart WhenLD: Enabled
49.64: DTStart by CB Op: Enabled
49.66: Dead Line Time: 5.000 s
49.67: SP AR Dead Time: 400.0 ms
49.68: 3P AR DT Shot 1: 400.0 ms
49.69: 3P AR DT Shot 2: 60.00 s
49.6A: 3P AR DT Shot 3: 60.00 s
49.6B: 3P AR DT Shot 4: 60.00 s
49.6D: SPAR ReclaimTime: 60.00 s
49.6E: 3PAR ReclaimTime: 60.00 s
49.6F: AR CBHealthyTime: 1.000 s
49.70: AR CheckSyncTime: 500.0 ms
49.72: Z1 AR: Initiate AR
49.74: Dist Aided AR: Initiate AR
49.75: Z2T AR: Block AR
49.76: Z3T AR: Block AR
49.79: DEF Aided AR: Initiate AR
49.7B: TOR AR: Block AR
49.7C: I>1 AR: Block AR
49.7E: I>3 AR: Block AR
49.80: IN>1 AR: Block AR
49.A5: AR SYS CHECKS:
49.A6: CB SC all: Enabled
49.A7: CB SC Shot 1: Enabled
49.A8: CB SC ClsNoDly: Disabled
49.A9: CB SC CS1: Enabled
MiCOM S1 Agile
Page: 14
Settings File Report
Substation: GELAN
File: 000.set
Model Number: P443312B3M0710M Printed on: 05/07/2023 16:21:14
49.AA: CB SC CS2: Disabled
49.AB: CB SC DLLB: Disabled
49.AC: CB SC LLDB: Disabled
49.AD: CB SC DLDB: Disabled
MiCOM S1 Agile
