BOOX NoteAir2 Series

User Manual
 Contents
1. Standard Accessories ................................................................3

2. Safety Guide ............................................................................. 4

3. Product Views ........................................................................... 6

4. Main Interface ........................................................................... 9

5. Library .....................................................................................25

6. Reader .................................................................................... 37

7. Store ....................................................................................... 86

8. Notes ...................................................................................... 89

9. Storage .................................................................................. 118

10. Apps .................................................................................... 122

11. Settings ................................................................................ 154

12. Specifications .......................................................................173

13. Declaration .......................................................................... 174

1. Standard Accessories
(1) BOOX Device x1

(2) Stylus Pen x1

(3) Type-C Cable x1

(4) Quick Start Guide x1

(5) Warranty Sheet x1

Optional Accessories (purchased separately)

(1) Adapter

(2) Protective case

(Note: The E-books in the following illustration are not pre-stored)

2. Safety Guide
Please read the Safety Guide carefully before you start to use the

device. Contact your BOOX retailer if you have any technical

problems, or you can dial our official service line at 4008-400-014

or 4008-860-830.

Screen protection
The device is equipped with an E-ink screen, which is very fragile.

Please have no shocking, squeezing, pressing against the screen,

or dropping the device from a higher place. If the screen is already

broken, stop using it and contact a professional or other qualified

staff to replace the screen for you. Please don ’ t dismantle the

device without our permission.

Standard accessories
Only the battery, adapter, and other accessories meeting our

standard safety rules can be used for the device. For details, please
refer to Product Specification. We will not be responsible for any

damage caused by incompatible accessories.

Stay away from liquids

The device is not waterproof. Don’t expose the device to a humid

environment or use it in the rain. Please keep it away from any

corrosive liquids.

Don’t dismantle the device

Please don’t dismantle the device in case of any damage.

Inappropriate battery model may cause explosion. Please contact

official after-sale team for battery replacement if needed. Users

shall undertakes the responsibility and deal with the obsolete

battery if users replace batteries themselves.

Using environment
The using environment of the device is 0°C-50°C.
3. Product Views

Front View

Power

Button
Left-side View Speaker

Mic

Type-C Port

Power Button
Button Function

 Press the power button to turn on the device

 Long-press the power button for 2 secs, then

select “Power off” in the menu to turn off the

Power/
device
sleep
 Press the power button and release quickly to
Button
let the device goes into sleep mode

 Press it again to wake up

 Long-press for 10 secs to force shutdown

 Record voice
Mic
 Recognize speech

 Connect the device with PC to transfer data or

charge device.
Type-C Port
 Support Type-C earphone

 Support OTG USB drive

4. Main Interface
The main interface contains a system bar, content area, and

function area.

The function area contains certain modules.

Double-click icons in function area can return to the main page of

the specific module.

System Bar

Content Area

Function Area
System Bar

This section displays the current state of the device, including: Time,

Notification, Refresh Mode, Wi-Fi Connection, Battery Usage. It is

only for status indication.

Split Mode (default):

Pull down " Notification Center" from the left side and pull-down

Control Panel from the right side.

Classic Mode:

Pull down both Notification Center and Control Panel in the same

time.
Notification Panel

This center contains information such as USB connection

notification, third-party push notification. Tap the notification to

jump to the corresponding app.

Control Panel

This panel contains Date and Time, Wi-Fi, Bluetooth, E Ink Center

(swipe up from the screen bottom to call out), Brightness

adjustment, Volume adjustment. The above-mentioned items are

permanent and cannot be removed or edited.

Edit

Brightness adjustment

Volume adjustment

Shortcut switch
E Ink Center

Open it from Control Panel or swipe up from the bottom to open it.

This section includes Dark Color Enhancement, Light Color Filter,

Refresh Modes (System), Shortcuts...etc.

Reset

Optimization Guidence

More refresh settings

Back Homepage Multitask switcher App Optimization Full screen refresh

Refresh Modes

The system-level Refresh Mode takes precedence over the

application Refresh Mode. That is: when the system is set to the

Normal Mode, the application uses its own refresh settings; When

the system is set to the other modes, the applications will use the

system's refresh mode.

There are 4 Refresh Modes:

Normal Mode (Default): Good display effect, suitable for

ordinary text reading.

Speed Mode: Slight ghosting and aliasing effect, suitable for

thumbing through eBooks with text and images.

A2 Mode: Slightly heavier ghosting and aliasing effect, suitable

for browsing images and text by quick sliding.

X Mode: Heaviest ghosting and aliasing effect accompanying

detail loss, suitable for browsing websites and video playback.

Use A2 Mode by default for scrolling

After you change the Refresh Mode, you can change contrast for a

better display effect.

The color model does not support X Mode.

Dark Color Enhancement

You can deepen the darker color of the page to black, which is

generally used to enhance the foreground color, or the light-color

page that needs to be darkened such as color icons, PDFs with poor

scanning quality, etc.;

Light Color Filter

This can dilute the lighter-color page to white. It is generally used to

bleach the background color;

ScreenCast

1. This only supports Windows10. Win7/XP and MacOS are not

supported currently.

2. Please make sure that the computer itself supports the

screencast function, which can be checked in the computer system

settings: System-Projecting to this PC.

Please pay attention to the 4 related settings, which will affect the

results of searching the computer on the device side and the

confirmation of the connection request;

This computer can support the state of screen projection

This computer does not support screen projection

3. Please make sure that the computer and your BOOX are in the

same Wi-Fi environment.

If a desktop computer is connected to Wi-Fi via wireless network

card, please confirm whether it is supported in step 2.

Some computer configurations and wireless network cards do not

support this function;

4. On the device side, select screencast from the system

drop-down list. Then the automatic search will start, and the name

of the computer will be shown when found.

5. In the search window, select the found computer. If there are

multiple supported computers, click Settings to enter the list of

supported computers. Then select the computer that you want to

project to from the list.

6. After you select the computer that you want to project to, the

computer will pop up a notice to confirm whether to accept the

projecting request;

7. After you confirm it, it will automatically connect and the screen

will be mirrored successfully;

If the "Unable to view protected content on this device" appears on

the screen, the connection may be unsuccessful. Please

disconnect the device, and request the screencast connection

again.

8. When the devices are connected, please tap the system bar of

the device- Screencast again, and select “ disconnect ” . The

computer cannot disconnect the connection.

If the computer supports screencast but cannot receive the request,

please restart the computer and try to reconnect again and check

whether the computer configuration rejects the request (see step

2).
Screen Record

Long press Recording button on the screen to enter the Screen

Recording settings. You can customize Resolution, Image Quality,

Screen Orientation, Sound Source, etc.;

When you use Screen Recording for the first time, you are

recommended to adjust the relevant settings first.

Instructions
Tap the Screen Record icon to open the floating window of screen

recording. Tap the “Start” icon to start recording and tap the Close

icon to stop recording；

After you stop recording, there will a thumbnail displayed in the

upper right corner, and you can tap it to play or share; Long press

the floating window to drag it around on the screen. The floating

window will not be recorded into the video;

After the Screen Record is enabled, the floating window will always

stay on the upper layer of the screen. You can create new screen

recordings continuously. If you need to close it, you can manually

tap X to close it.

The Recordings’ format is MP4 and the save path is:

Storage/Movies/Captures
 Preview

Share

Close

Start / Pause
5. Library
The library only displays E-book documents in supported formats in

the storage. Book cover thumbnail is displayed by default. E-books

are sorted by the creation time.

On the upper right working area of the Library, users can search,

create a new bookshelf, manage books in bulk, check Reading

Statistics, pop up the drop-down menu (including Filter, Refresh

Library, Scan Covers, Library Setting, Switch to List View)...etc.

Library Display Switch

Click on these icons to switch the library display. By default, it

auto-scans and loads all the supported documents in specified

paths, sorted by a specified way.

Another one is to display the content based on the structure of

storage. The icons change after clicking on it.

Filter & Sort

By default, it shows all books in descending order.

Refresh Library

“ Refresh Library ” gets all documents in supported formats

scanned and rebuild library list. This function does not delete the

reading history.

Create Sub-library

It helps to manage books by file manager.

Library Settings

It supports custom scan path. You can set certain storing path as

Automatic Scan;

After the scan path is set, the Library will be reloaded. The books

that are not in the scan path will be removed. If you need to read the

books, you can find the original file in the storage;

Sub-library Attribute

Long-press on sub-library cover to view more information about

sub-library. To delete or rename sub-library are allowed. When

deleting sub-library, the containing books will be moved to Library

and will not be deleted with the sub-library.

E-book Attribute

Long-press on book cover to view more information about E-book

name, author, format, size, reading progress, book detail(only

available for the E-books of Store), open way, Lock 、 rename,

move(to sub-library) and delete. One E-book only can be added to

one Sub-library.

As for the books purchased from the Store, is allowed to view book

details by jumping to the Store page.

Clear settings

Jump to Storage
Clear settings including : clear password default settings , clear

reading data , Clear Cache、Clear book Cover；

Lock ( Reading Password)

User can add (reading) Password to lock each file in order to protect

personal reading data；

The Password is used to open the file, but it only applies to the same

device and NeoReader. If you copy and export the file to other

devices or Apps, the Password will become invalid.

You can use the same Password as the Screen Lock. Or you can

set a different digits Password.

Digits Password only support one Password. After you have set the

digits Password, you do not need to set another digits Password

and only need to add the Lock.

Reading Password supports individual setting or setting in bulk

(setting in bulk is to add Locks). Currently It does not support to add

Passwords to all files directly.

If you choose to use this Password Setting by default, you can add

Password to other files quickly and do not need to re-select the Add

Lock Option every time after the Password is set for the first time.
Reading Statistics

This page includes the Reading Time of Today, The Books that

Have Been read, The Books that Have Been Finished, Total Time,

Highlights and Annotations, and Recently Finished Books;

The average reading time this week is based on 7 days and

calculates the average daily reading time during the week;

Average Reading Time Distribution includes the reading time of all

days since Reading Statistics is turned on.

Under Reading Statistics, only highlights and annotations can be

jumped to and the books that recently have been finished can be

opened. Other data is only for analysis purpose.

The reading data of each device can only be available on the same

device. You cannot check the statistics of this device on another

device.
Share (Third-party App)

This supports sharing files through third-party App. The sharing

path is automatically obtained according to the installed Apps.

 6. Reader
Tap any E-book cover to open an E-book. Full-screen reading

without showing status bar is set by default.

To pull down from the top of the screen can call out the status bar.

To tap on the center of the screen can call out the menu bar for

switch among different documents or other functions

Enable/disable stylus Dictionary

Open file OCR Search

Other functions

Scribble tools

TTS

Slideshow

Thumbnail view

Undo, redo
Floating Toolbar

You can choose to activate the Floating Toolbar for the first time

when you open a file. Or you can go to Settings / Floating Toolbar

Settings to enable it and customize the function buttons in the

Floating Toolbar.

The Floating Toolbar includes: Hide, Scribble, Enable Palm

Rejection, Menu, Prev Page, Next Page, Cancel (Progress)

Long press on the Floating Toolbar, you can drag it around on the

screen.

You can expand or contract the Toolbar to the edge to avoid cover

any text on the screen. When you need it, just swipe from either

side of edge to the other side to expand it.

When the page is zoomed in, the Floating Toolbar would

automatically expand proportionally in order to manage the

zoomed-in page better.

Under zooming status, singe tap on the screen is set for turning

sub-pages of each page(each original page will require several

time page-turns to be completed). But tapping the virtue page-turn

buttons on the Floating Toolbar is set for turning the whole original

page.
You can disable the Floating Toolbar by going to Setting - General

Setting. When it is contracted to the edge, you can swipe from either

side of edge to the center of the screen to expand it.

When palm rejection is enabled from the Floating Toolbar, it only

applies to the reading document. The Floating Toolbar still supports

hand touch, but it can remove the interference of hand when you

write on the reading document.

Word Menu

Long-press on the word to pop up dictionary dialog for look-ups.

English word recognition and look-ups are supported.

Through the drop-down list on the top right of the dialog, the

dictionary can be switched to others.

Users can download and install the dictionary themselves. Put

dictionary file on the path root directory\dicts\xxx (e.g

Storage\dicts\English-French), or download dictionary online

directly. Dictionary is available to use after being installed.

Tap on any position out of the dialog to exit the dialog.

Switch Dictionary Jump to Dict App

Add to Vocabulary Builder

Jump to Vocabulary Builder

Turn page

Swipe to translation window

Third-party Dict
(Required to install separately)
Copy Web search Search
Annotation TTS Highlight
Long press on any word and drag to select the text you want to

mark.

The highlight is set by default for selected text. Users can switch

among highlight, underline and others, the color highlight can be in

black or grey. The mark setting remains after a change. The marks

before the change will not be affected.

Delete highlight

Switch translation

Third-party Dict

(Required to install

separately)

Tap on any position out of the dialog to exit the dialog.

Choose “Annotation” to pop out a text box to add notes if needed.

OCR (Beta Version)

Only supports pages in image formats PDF, CBR, CBZ, DJVU, and

PNG. Recognize one page only each time.

Choosing horizontal or vertical according to the document layout

can improve the recognition accuracy.

Recognize 5 times a day when you are not logged in to your ONYX

account.

Recognize 10 times a day when you are logged in to your ONYX

account.
You can long-press text to add annotation and lookup dictionary on

the recognized pages

If some individual characters are not recognized correctly, you can

switch to the original text in the annotation pop-up window to

correct them, and manually modify the recognized text content

(Do not change the original page text);

Pages recognized by OCR show the recognition mark in the upper

right corner, and the recognized pages can be viewed in the

Directory-Bookmark, which is convenient for quick locating and

jumping;

Tapping the recognition icon again will clear the OCR content;
 Scribble Toolbar

The Scribble Toolbar is floating on the screen. You can long press it

and drag it around.

The stylus is in handwriting state by default, and you can switch it

On\Off in the top Toolbar;

The Scribble Toolbar needs to be called through the reading menu

on the bottom or called from the collapsible Floating Toolbar.

Erasers

Brushes Save

Collapse
More
Toolbar

Zooming
Lasso

Shapes PDF Embed/Save

as PDF
Colors
Cancel/Redo
Brushes and Erasers

When in erasing state, you need to manually switch back to

handwriting state to continue writing.

Colors

Only black, gray, and white colors can show their original colors on

BOOX. Other colors are shown in black on BOOX and will be shown

in their original colors when exported to PC.

Embed PDF

The handwritten contents on the PDF will be automatically

embedded into the original file when you exit the PDF file. You can

view and edit them with other apps such as Adobe acrobat, WPS,

and Chrome on PC. When copying the embedded files to other

BOOX, you still can view and edit the files.

Embed PDF:

You can manually save the files in the Scribble Toolbar when the

files are still open.

Save as PDF :

allows you to export in a new PDF file and keep the files with same

handwritten content.

Non-PDF files do not support data embedment. You can only check

relevant data on BOOX devices. When the files are copied or moved

to other locations, they are identified as different files without

relevant data. But changing file names do not impact the existing

data.
PDF files with embedded data

A. Changing file names, copying or moving to a different

location will not impact the recognition of the embedded data.

B. When the PDF files with embedded data are divided into

multiple PDF files using other tools on PC, the new files will be

identified as different files and will not import the embedded data

C. When the PDF files with embedded data are edited and

saved using other tools on PC, the files will identified as different

files and will not import the embedded data.

Note: If your BOOX is in handwriting state when it is connected to

PC via USB, please disconnect USB connection to make sure data

update normal. You can connect BOOX to a PC again via USB when

PDF files are saved.

PDF files without embedded data

When a new PDF document is opened, it will automatically detect

and import the local existing data according to the document ID and

storage path;

For example: after you delete 123.pdf with embedded data from the

local, and put the original 123.pdf file (without data) back, there are

the following situations:

A. If you put the file back to the same saving path, the existing

embedded data will be automatically imported.

B. If you put it back to a different saving path, the existing

embedded data will not be imported.

C. If you change the file name and put it back to the same

saving path, the existing embedded data will not be imported.

D. If you put other file with the name 123.pdf to the same saving

path, the existing embedded data will not be imported.

Handwriting recognition

Double-tap the handwritten text or shapes to start AI Recognition.

In the state where hand touch is disabled, double-tap can also be

used to initiate the AI Recognition

The text and shapes with 0.5cm spacing and straight lines with

0.3cm spacing can be recognized as one content area. If the

spacing exceeds either of the two spacings, the content will be

recognized as a different content area.

The boxes or lines near the text can be converted into underline and

highlight after being double-tapped. That offers great convenience

to add highlights to the converted content.

If users do not want it to be converted into highlights, you can

disable this function from Handwriting recognition settings. The

handwriting content will be only converted into images.

Converted to adding Bookmarks

Use stylus to click the upper right corner to add a bookmark

This area does not support page-turn by stylus.

Page-turns

Users can use the stylus to tap the 2 corners of the content area for

turning pages. This offers convenience to page-turn when hand

touch is disabled.

This function is on by default.

Bottom Menu Bar (PDF format)

This bar includes settings of TOC, Progress, Layout, Contrast,

Navigation, Split-Views.

TOC

TOC contains Table of Content, Bookmark, Annotation, and

Scribble.

TOC supports three-layer hierarchy. The current layer is

underlined. Jump to the corresponding page when tapping any of

the layers.

Tap on any position out of the TOC to exit.

 Order

Full screen

Bookmarks

Without calling out the menu, bookmark the reading page by simply

tapping a tag on the top right corner of the screen. Tap it again to

un-bookmark the page.

The bookmarks can be checked under the path of Doc-Bookmark,

where users can delete bookmarks.

Jump to the corresponding page by tapping any of the bookmarks.

Annotation

All highlighted/underlined/annotated content would be listed under

the page of Doc-Notes for further searching, editing and deleting.

Jump to the corresponding page/content by tapping any of the lists.

All contents on the Annotation page can be exported in txt format.

Exported files are saved under the directory folder

Storage\Note\(same name as the source file).

Scribble

All scribble and sidenote can be viewed under the page of

Doc-scribble for further searching and deleting.

Jump to the corresponding page by tapping any of the pages.

All scribble contents can be exported in Png format and saved

under the same directory folder Storage\Note\(same name as the

source file).
Progress

It displays the chapter name (book name if no chapter), page

progress, last/next chapter, page number, slideshow, undo, and

redo.

Tap on the page number to enter a quick-flip interface. Click the

page numbers again and input number to jump to the page directly.

PDF files support for searching and using the files ’ own page

number (custom page number type)

Format

This includes settings of Paging, Zoom, Crop, and Margin.

Pagination:

There are options of Single page, Double-page 1, and Double-page

2. Double-page mode only supports horizontal screen.

Zoom:

Zoom in, zoom out, and partial zoom are supported. Users can also

pinch fingers together or apart to zoom out or in on the reading

pages.

When a single page exceeds the display area of the screen after

zooming, you can long press and drag the display area around.
Single tap is to turn sub-pages. You need to use the virtual

page-turn buttons to turn the original whole page;

Crop:

Auto-crop according to the margin set by users.

Margin:

The empty space at the sides of book content for auto crop.

Margin:

The default reserved blank area during automatic cropping. You

can manually modify the automatic cropping area.

Contrast

Embolden only applies to text in PDF.

Sharpen Imag can sharpen the images.

Watermark Whitening can whiten the light-colored images or

background in the pages.

Dark Color Enhancement applies darker display to either the whole

pages or text only.

Navigation

Navigation allows users to have options of Reset, Comic Mode,

Article Mode, and More Settings including Crop, Split, and Subpage

Order.

Comic Mode: the screen will be divided into four subpages and the

reading order is upper right – upper left – bottom right – bottom

left.

Article Mode: the screen will be divided into four subpages and the

reading order is upper left – bottom left – upper right – bottom

right.
More settings

Manually adjust the settings of area cropping, page split, and

subpage order.

Crop: Manually select the cropping area for single or double pages.

Split: Split the pages into specified subpages in different ways.

Order: Decide the initial position and reading order for subpages.
Reflow

Reflow now supports both scanned and text versions.

Reflow is only available for PDF/DJVU/CBR/CBZ documents.

Scan Type

Reflow allows users to further customize the layout of documents

including: Line Spacing, Margin, Text Direction, Font Size, Columns,

and Skew Correction (for italic documents).

Text Type

Applicable to the digital PDFs or PDFs that have been recognized by

OCR (you can press and hold to look up words) PDF. The reflowed

files can use the features of flow documents.

Split View

It allows to respectively open current document, two different

documents, or one document & Note at the same time、Split-View

( Doc & Translation ) ；

Split-View now supports both Horizontal Mode and Vertical Mode.

You can swap sides of the two windows.

Current Doc (same doc)

The two documents are totally independent. Users can respectively

turn pages and save them.

The scribble, highlight, annotation, bookmark would be

synchronized to each other after page refresh.

Different Docs

Choose a document different from the current document.

Similar to the Current Doc, these two documents can be

respectively operated. The display is also swappable. For PDF

document, please try to swap them if part of them is not writable.

Doc & Note

Likewise, they are swappable.

And the Note will be created with a name same as the document. It

associates with the document and can be edited in Note app.

Every document can only have an associated note. Changing the

name of the note does not affect the association.

Split-View (Doc & Translation)

This supports Baidu Translate and Bing Translate and provides full

page translation.

This also supports multiple target languages;

Your BOOX needs to stay connected with internet;

Some translation engines have a limit on the number of words per

day. Please see the tips on the translation page for details;
Bottom Menu (other formats)

This includes settings of TOC, Progress, Format, Contrast, and Split

View and supports flow formats such as EPUB\TXT\MOBI\AZW3.

V2 Engine

Some flow formats (ePub\mobi\azw3\txt\word\jeb\html) use V2

engine by default. Go to Reading Settings/Other Settings to switch

to NeoReader

V2 engine supports the original layout of the document, including

font, line spacing, margin, graphic typesetting, indentation, etc.;

After being switched the V2 engine, the document will be closed

automatically, and the V2 engine will be used when you reopen the

files; If you need to switch back to NeoReader, you can cancel the

V2 engine and reopen the document;

V2 engine does not support to sync data from NeoReader such as

Bookmarks, Annotations, and Handwritten notes.

Progress

The document needs to be paginated again after switched to V2

engine, or font and spacing adjustment. You can check the

pagination progress in the reading Menu>Progress. After the

progress bar is loaded, it means the pagination is completed. You

can drag the progress bar to jump pages after the pagination is

completed.

Loading

Finished loading
Format

The settings include Font Face, Display and Spacing.

Loading font face in the directory Storage\fronts is supported.

The settings for font size, font face, contrast, bold, spacing work on

all newly opened documents, but not work on the documents before

settings.

First line

indent

Line break

hyphen switch
Screenshot

Diagonally tap on two corners of the screen to capture the screen in

PNG format. The function is only available on the reading page.

The screenshot will be saved to the local, or shared by scanning QR

code. The save path is Storage\Screenshots.

Refresh

Tap the hamburger menu located at the upper right corner to

choose Refresh and other related settings of refresh

Regal refresh and partial refresh are by default

When scrolling the page, speed mode is by default.

Settings

There are General Settings, Touch Settings, TTS Settings, Export

Settings, Screenshot Settings, Floating Toolbar Settings 、 Other

Settings and Version Name.

General Settings

There are Enable page close reminder, Enable system status bar,

Enable reader status bar, Enable multiple documents, Show file

borderline, Enable Floating Toolbar, Show hyperlink, Show

bookmark position, Apply certain options to all documents 、

Annotation Font Size Setting；.

Touch Settings

Users are able to customize the touch settings for different areas.

There are six default touch modes can be chosen and users can

customize three more.

TTS Settings

The built-in Baidu TTS is set by default. English is supported. A

network connection is required at first use.

Switching to third-party TTS system is allowed. The built-in TTS

settings are not synchronized with the system TTS settings. The

system TTS settings work on the third-party TTS by default.

Export Settings

The default storage path is Storage\Note.

The export files can be also saved to the same directory as the

source file.
Floating Toolbar Settings

This page offers General Settings of Floating Toolbar, Scribble

Settings, and Handwriting Recognition Settings;

General Settings

It is enabled by default and can be turned off manually. After

disabled, it can no longer be called out;

It can be customized whether the indicator is displayed after it is

collapsed. Call out the Floating Toolbar by swiping from the screen

edges. The Toolbar’s size, display style and functions buttons are

customizable.

Press and hold the function button icon to display the definition of

the function button;

Scribble Toolbar Settings

The Toolbar ’ s size, display style and function buttons are

customizable.
Handwriting Recognition Settings

It is enabled by default and can be disabled manually. After disabled,

it will no longer support double-tap recognition

The underline can be recognized as highlight first. It is enabled by

default, and it can be turned off. After it is turned off, it is only

recognized as an image;

You can set the recognition of hand-drawn symbols as adding

bookmarks. It is disabled by default and can be manually enabled.

After enabling, double-tap recognition of the symbol will

automatically convert to adding bookmarks;

Other Settings

This setting page includes “ Open ePUB documents with V2

engine”, Enable “Pinch-to-Zoom”, and Enable “Turn pages by

swipes”

When “Turn pages by swipes” is disabled, you can only turn pages

by tapping on the screen. This can avoid accidental page-turnings

when you are taking handwritten notes.

7. Store
In the language of non-Chinese, the Store is offering free

publications E-books from the Internet.

Category

Books can be screened according to different categories.

Book Detail

Click a book cover to open up book detail. The specific book

information. Click “Full Edition Download” to download the book,

then you can see this book cover in Library .

8. Notes
This includes Recent Notepads, Local Notepads, and Reading

Notes.

Recent Notepads include 12 Notepads that have been opened

recently, including local notepads and reading Notes

The Reading Notes include the Notes created under Split View

when users are reading books.

Reading Notepads Multiple Selection

Local Notepads

Recent Notepads More Options

Create new folder

Search

Onyx Cloud Sync

Cloud Sync ( in bulk)

Notes Cloud Sync requires logging in to Onyx Account.

Sync in the background. After you are logged in to ONYX account,

the notes will be automatically synced from and to Cloud when you

exit a Notepad.

Sync in bulk, including Notes list, all Notes. Users can manually

sync all notes in bulks.

Cloud Sync includes two-way sync between Cloud end and BOOX

device. When there is any change to the Notes on either end, the

other end will sync all the changes.

The deleted Notepads can be recovered within 10 days from

website trash bin. If you delete the notepads by mistake, you can

recover them from the trash bin, which will be emptied after 10 days.

After Notes are synced, users can check the synced notes from

push.boox.com by logging in the same Onyx Account.

Currently PDF templates cannot be synced and only PNG templates

can be synced.
Other accounts Sync

When third-party accounts are bound, the notes will be

automatically synced when you exit a Notepad. Alternatively, you

can sync notes by tapping the Sync icon on the top bar.

Third-party accounts only support one-way sync and do not

support syncing notes back to BOOX devices. You do not need to

log in to ONYX account.

Sync Results

Long press the cover of the Notepad to pop up the Property Window

and check the synced accounts and sync result list.

Tap the sync icon to sync again for the accounts with abnormal

sync.
More Options

This includes Sort By, List Mode, Sync Settings, and Option

Settings.
Notes Sync Setting

This includes ONYX Cloud Notes and export to other accounts.

When you export the Notes to third-party Accounts, the Notepads

will be in PDF format and cannot be edited.

If you export your notes to other bound accounts, the notes will be

automatically synchronized to other bound cloud accounts of yours

when you exit the Note. The sync icon is only applicable for the

ONYX account cloud sync.

Backup and Recover

It supports backup and recovery of notes locally and does not

support Cloud backup.

Note: The action Recovery will recover the backup data, which will

overwrite the current data. Please be careful.

Settings

These are general settings for Stylus Calibration, Account Sync and

Backup, AI recognition, Notepad password settings, Show Erasing

Trace, Auto-turn on Wi-Fi to sync Notes, Auto-generate PDF

documents after exiting Note, Auto refresh after lifting stylus.

If this device is bound with third-party accounts for file sync, and

Wi-Fi is connected, the Note files will be auto-uploaded to the

accounts with a PDF or PNG attachment.

If“auto-turn on Wi-Fi to sync Notes”is enabled for notes sync, the

device will connect with Wi-Fi automatically and sync notes to the

Cloud when exiting the Note app. If it is disabled, users need to sync

to account manually by clicking an upload icon on book covers.

For the “Auto refresh after lifting stylus”, the display would refresh

after users lift stylus away from the screen, making the strokes

smoother.
Notepad Password Settings

This password is only used for protecting files on the device, not

encrypting files. So, the password does not work out of the device.

Now this function does not support multiple passwords for one file.

This function supports specific password, which are available for all

note files. Users can also set a specific password for a single file. To

add, edit and remove password are allowed here.

The specific password can be different from the system password.

Separate numeric password allows you to choose whether to add

locks to new notepads. If you cancel this option, the new notepads

will not be automatically added locks. You need to add them

manually later.
The note file has no cover thumbnail after locked.

Long-press the note file to remove and add password in the dialog.
 Scribble Interface

Files can be saved automatically and manually when to quit the

Note.

Tap on the page number to jump to the specified page quickly.

Fullscreen Name Brushs

Eraser

Page\Thumbnail

Undo\Redo
Layers

This supports template layer, 5 custom layers, hiding and adjusting

layer order.

Hidden layers will not be displayed during export and recognition;

Templates can only be added at the template layer, and the

template layer cannot be deleted;

You can add 5 custom layers to the inserted images

Delete layer

Show layer

Hide layer

Move layer

Select template
Templates

The settings of Templates include Scaling, Original image splice,

Stretch to cover all, Original size and Fit canvas.

It is recommended to write after the template style is determined to

avoid changes in the templates after writing.

Canvas Editor

The default canvas size is 1x1, same as the screen size.

The canvas size can be adjusted to 1x2, 2x1, 2x2 or custom size.

The max canvas size is 2x2. You can customize the canvas size

within the max size. You can adjust the canvas size by dragging the

canvas.

Canvas adjustment base is located at upper left corner. Drag left or

downwards to expand the canvas.

When you switch from the large canvas to the small canvas, the

strokes outside the canvas range will not be displayed, but will not

be cleared. But the strokes can be redisplayed after you switch

back to the large canvas

Canvas Adjustment will cut the redundant blank part of the canvas

based on the outermost strokes position.

Horizontal Notepad

The notepad orientation is synchronized with the system rotation

direction. When the system is switched to the horizontal screen, the

notepads are synchronized to the horizontal screen. The created

notepad under the vertical mode will retain its vertical size. The

canvas size can be manually adjusted;

The newly created notepad in horizontal mode directly uses the

canvas size 1x1;

Brushes

You can add 5 custom brushes. You can set type, color, and line

width of each brush. Double tap the icon to expand the secondary

menu for more options.

Fit to Canvas and Fit to Screen

When the canvas is larger than the screen(1x1), you can go to

Toolbar / Zoom to adjust the canvas size to “ Fit-to-canvas ” or

“Fit-to-screen”.

Fit-to-canvas: the canvas will be automatically expanded to fit the

whole screen. When the canvas is larger than screen, you can long

press the canvas to pan it around.

Fit to screen: the canvas will zoom out to fit to screen. You cannot

write on the grey area.

Custom Toolbar

Besides the default tools like scribble, erase, fullscreen, select,

users can add, remove, adjust other tools on the toolbar.

Erase

In the state of stroke erasing, you need to switch to the brush first

and then write.

For the “erase all”, you do not need to switch back to the brush.
Lasso

In the Lasso mode, circle an area on the screen, then users can

zoom, move, duplicate and remove the selected area.

Text Input

Users are allowed to key in words on the note by a Bluetooth

keyboard. The input box can be moved everywhere.

Users can adjust the font, line spacing, bolding, underline, italic,

copy and delete.

stylus touch for icons is desensitized by default, so it is better to use

your fingers to adjust the position of the Navigation Ball;

when using full-screen the square icon to exit full-screen mode.

Insert a Recording

After tapping the Recording icon, the Recording will start

immediately. The recording progress bar will be shown on the top

Toolbar. You can pause the recording. You can take notes while

recording.

After stopping the recording, you can save or delete the recording

directly. You cannot restore the recording after you choose to

delete it.

The recording window is floating on the screen. You can long press

it and drag it around on the screen.

You can insert more than 1 recording on one notepad page.

Check all recordings at Toolbar/More/Recordings. You can only

play recordings in current notepad. You cannot export recordings to

PDF to use.

If recordings are saved to local storage, you can export recordings

in MP3.
Insert Image

Users can remove, zoom, duplicate the images inserted from the

local. Select the image and then edit.

AI Recognition

Click the icon “ AI ” to switch to recognize the handwriting text.

English is supported. To download the corresponding language

package is required for other language recognition.

This function contains original recognition and reflow recognition.

Original recognition only does conversion but not changes the

position of words, while reflow recognition reflows words after

conversion. Users need to manually add space, line break and font

size.
The text flows automatically after reflow. Users can manually make

space, newline, and font size after that.

The accuracy of recognition depends on how normal the

handwriting is.

AI recognition works based on the handwriting. If the handwriting

content changes, please re-enter the function to let it convert once

again. For saving the converted content, please export it.

Share

This supports to share all pages (PDF format) and current page

(PNG format);

Support scanning code sharing of Onyx account and sharing

through third-party app;

Full screen mode of Notes

When you switch to full-screen mode, you can choose whether to

display the Floating Toolbar.

When it is collapsed, you can call it out by swiping from the screen

edges.

Note: The full-screen mode is an independent note-taking mode. If

you exit, you will exit the Notepad directly. If you need a

non-full-screen mode, you can switch on the Toolbar;

The default Floating Toolbar only includes Fullscreen, Pen, Color,

Eraser, Collapse, and More. You can tap the “ More ” icon to

customize the icons on the Floating Toolbar.

Floating Toolbar Settings

The Toolbar ’ s size, display style and function icons can be

customizable.
9. Storage
Recent Files

This section includes Shortcuts and Recently Updated Files, which

are sorted in reverse order by time.

All Storage

This section includes Storage path and Categories. files will be

classified according to the file formats, but the original storage

location of the file will not be changed;

Long-press the folder to pop up Property Window and choose “Set

as Shortcut”, which offers quick access to open it.

OTG External Disk

OTG is supported. Users can connect the device with USB drive

through a Type-C cable. The device will detect USB drive

afterwards.

The OTG feature would consume more power since it supplies

power to a USB drive.

It supports analog and digital Type-C earphones ( You can use

3.5mm audio jack converter);

Low storage space warning

Please reserve at least 300M of available storage space to ensure

the normal operation of the system and saving related data;

When it is lower than 300M, a warning icon will be displayed in the

system bar, indicating that the storage space is insufficient;

10. Apps
All installed apps are sorted by name by default. You can also sort

them by time and manually.

Long press an app to pop up options of Uninstall, Manage, Optimize,

and Add to a group

App Management

This page includes USB Debugging Mode, Application Info,

Location Settings, Auto-start Settings, Refresh Mode Settings,

Freeze Settings, Automatically update the Optimization config of

third-party apps, Fill in available space automatically, Enable

Google Play.
Auto-start Settings

Only applicable to device auto-start. After it is enabled, the

applications may take up more storage space and consumes more

power.

Apps need to monitor the system start. After apks are installed, you

need to tap the app icon to start it once.

After it starts successfully, it only runs in the background and will not

show in recent running tasks.

Refresh Mode Settings

This allows you to set the refresh modes of third-party apps in bulk.
Freeze Settings

You can obtain the optimization settings of third-party apps with

one click and freeze all apps in the background with one click for a

better user experience and saving power.

App Optimization

Display

DPI: Adjust the interface size of the app. The default value is 350,

If some content of the app interface has been cropped, you can

reduce the DPI value.

If the overall interface size of the app is too small, you can increase

the DPI value.

If you've adjusted the DPI value to the minimum, some content of

some app interfaces such as Kobo is still cropped, you can choose

to use the app's default DPI.

Bold Font: Embolden fonts of titles, menus and body text.

Cloud Optimization: Some apps are specifically optimized and you

can retrieve the cloud optimization configuration to obtain better

results than local optimization;

Reset All: Reset all modified configurations to the original

configurations.

Optimization Switch: when it is turned off, some optimization effects

will be canceled, but it won’t reset the configurations.

Bleach

Add strokes to text: The text and background on the same layer will

not be visible after being bleached together. This setting will add

strokes to text and make the text visible.

Icon Color: this darkens the colors of small color icons in the Menu.

Cover Color: This darkens the colors of big cover icons.

Background Color: This bleaches the background colors.

It is recommended to use it along with Font Color Enhancement and

Icon Color. Otherwise, the text and small icons on the background

may be hardly seen.

Refresh

Refresh Mode: This sets the refresh mode for individual apps.

Normally the default refresh mode is Speed Mode.

Only when system's refresh mode is Normal Mode, the app's

refresh mode will take effect.

When system's refresh mode is set to Speed\A2\X Mode, the

system mode has priority. And the app's refresh mode will not take

effect.
Full Refresh Frequency: In app, fully refresh the screen by the

number of tapping in order to reduce ghosting.

The actual number of taps is related to the app's configuration.

Sometimes a single tap may have several consecutive responses.

E.g, you've set 20 times, but full refresh may be initated after 15

taps.

Animation Filter: Filter the animation of turning pages in the app.

Time indicates the duration of the animation effect to be filtered.

Generally, the page animation is about 200 ms;

Others
Full refresh when turning pages. : When the main function bar in the

app is switched, full refresh is performed to reduce ghosting;

Switching some app function bar does not actually switch the pages,

so full refresh would not be performed.

Webpage Font Size: Adjust the font size of the web view embedded

in the app. When adjusting DPI does not work, try to adjust the font

size of the webpage;

Webpage Text Color: When the adjustment of the bleaching does

not work, you can try to adjust the color of the webpage;

Embolden Webpage Text: When Bold Font under Display tab does

not work, try to embolden the text on the webpage;

Allow the app to run in the background:

For apps that need to run continuously in the background, such as

Alarms, Notifications, Downloads, Time statistics and other apps,

you can allow them to run in the background. But the continuous

running in the background may increase power consumption!

Scribble

Only optimize handwriting speed for apps with handwriting function.

Currently, it supports OneNote, Evernote, WPS. More handwriting

apps support will be added in the future;

The time to refresh after lifting stylus: Handwriting will be refreshed

to app's original brush configuration (including brush type, line width,

pressure sensitivity, etc.) within the specified time after the pen is

lifted;

When refreshing the handwriting, you cannot continue writing,

please continue to write after refreshing is complete;

If you need to write continuously to reduce the interruption caused

by refresh, you can set the longer refresh time;

Hand touch may interfere with the writing of the stylus. It is

recommended to enable Palm Rejection to avoid canvas moving or

zooming resulting in interruption of handwriting or abnormal display.

Navigation Ball

Navigation Ball is a circular ball that floats above all the apps on the

screen. 9 buttons can be customized.

Single click on the ball to expand and collapse navigation menu.

It requires to turn off and on again after the new button settings.

The Navigation Ball by fault is in Fan-shaped style. You can choose

other display styles (Horizontal Style, Vertical Style) from

Navigation Setting. You can also adjust the transparency of the

Navigation Ball.
This supports to set as a resident button. After being set as a

resident button, the button will always be floating on the top layer;
The 9 buttons can be set as multiple common functions including

system operation, app switching, app optimization and so on.

The app optimization can be called out in an app through the

Navigation Ball, for real-time review after optimization.

Dictionary

If users use dictionary apps the first time, to download dictionary

package to local will be asked.

This function requires network connection.

Word pronunciation needs a dictionary file comes with voice files,

currently TTS is not supported.

Pronunciation Search Online

Add to vocabulary Settings

Switch Dictionary
Users can install dictionaries themselves by putting the dictionary

files to designated directory Storage\dicts\.

Please save the files under a folder, e.g., dicts\English-English

Dictionary.
For the preferred dictionary settings, users can select up to 20

preferred dictionaries. Users will be asked to select again if the

select number is less than 1 or more than 20.

After dictionaries are installed, users can look up new words in the

search bar. Switch between different dictionaries by tapping a

corresponding dictionary title on the bottom.

The search result is in terms of the related dictionary. If the word is

unfound, try to use other dictionaries.

Looked-up words can be added to Vocabulary.

Users can divide the Vocabulary into groups. The words will be

saved into the specified group once the group is selected.

BOOXDrop

Connect your BOOX with PC or mobile phone. You can send files to

your BOOX from PC or BOOX Assistant app, or save files on your

BOOX to PC or mobile phone.

Instruction:

1. Open BooxDrop from Apps page or drop-down Control Panel

2. Open a browser on your PC

2.1 Without login: Make sure your BOOX and PC are in the same

network. Enter the IP address on your BOOX to the browser on your

PC.
BooxDrop does not disconnect automatically. If you want to

disconnect it, please do it manually or switch itONYX

offAccount
from Control

Panel.

Records

Disconnect
2.2 Logged in to ONYX Account: log in to push.boox.com. You can

see the connected devices on Push page. Click it to open.

3. When you open the web browser on your PC, it will automatically

confirm whether your PC and BOOX are in the same Wi-Fi network.

If not, the page cannot be opened. Please connect to the same

Wi-Fi.

4. When web end and your BOOX are connected successfully, you

can load files and contents from your BOOX on your PC.

5. Send to BOOX: Select files from your PC and send to BOOX.

The sent files are automatically classified into the corresponding

directory according to the format types.

Recent Files: include all files and are sorted by time

Library: Books/xxx.epub ( This includes all supported eBook formats in the

Library）

Pictures: Pictures/xxx.png

Music: Music/xxxx.mp3

Videos: Movies/xxxx.mp4

Downloads: Download/xxx.xxx

Internal Storage: Transfer the selected directories.

6. Save to Computer: Select the files on BOOX and save them to

computer.
PushRead

From the Subscription section of push.boox.com or BOOX

Assistant, you can enter a webpage address, push it to your BOOX,

and read the page in html format.

To use the PushRead for the first time, you need to bind the same

ONYX account on the website push.boox.com and your BOOX;

You need to connect your BOOX with Wi-Fi to download the pushed

URLs for the first time. After loading once, it can be read offline later;

The layout of the content page defaults to Browsing Mode (the

layout of the original web page), and you can choose to switch

between Browsing Mode and Reading Mode from the More Menu;

The Reading Mode is a single page mode, tap the page to turn the

page directly;

Prev. Article Next Article

Search

Swith refresh mode

Switch reading mode

Full refresh

Refresh website

Font size+

Font size-
Back to the Top
App Store (E-ink)

There are some usual third-party apps provided here. These apps

are free versions from developers and their compatibility are not

verified as full to the system. Paid apps download is not supported

for now.

Users can choose to delete the installation package automatically

after Apps are installed.

Screensaver

The screensaver and shutdown image can be customizable. The

shutdown image only supports image formats.

Screensaver style

The Image Screensaver is by default.

The screensaver supports Image Screensaver, Poem Screensaver,

Words Screensaver, Calendar Screensaver, Clock Screensaver ，

and Transparent Screensaver.

The clock, text, and Bottom Status Bar can be added to the other

screensavers aside from the Transparent Screensaver.

Clock refresh intervals are customizable. After the clock is added to

a screensaver, a certain frequency of refreshing screen will be

retained in the standby state, and the automatic shutdown timing

cannot be supported.
In Image Screensaver, when a single picture is selected, the

screensaver is a fixed picture. When multiple pictures are selected,

the screensaver will be shown in carousel format;

The Bottom Status Bar can display the battery status and lock

screen status;
Calendar Memo

The calendar Memo can display the notes and reading records

under the current date. You can open the notes or documents

directly by tapping the records;

You can add handwritten notes as a memo, which can be set as a

screensaver. Please go to Screensaver / Calendar Screensaver

Setting for more details.

The content of Calendar Memo temporarily does not support the

synchronization.
After logging in to the ONYX account, you can use the mail function

to send the contents of the Memo to the designated mailbox as a

PDF attachment;
Split Screen

This supports Apps Split-Screen. You can select Split-Screen from

the system drop-down bar when an application is opened, and then

select a document, a notepad or other application that you want to

open on the other side of your screen.

The system interface does not support enabling Split-Screen

directly. You need to start an application before enabling it;

The applications that do not support Split-Screen will prompt "This

application does not support Split-Screen" when split screen is

enabled;

There are 2 modes available: Vertical and Horizontal. You can swap

sides of the apps.

When in split-screen mode, the left screen (or the top screen) will

be the main screen. And the secondly opened app will be on the

right screen (or lower screen). You can swap apps' sides.

In Split-screen mode, exit Split-screen mode from the system

drop-down menu.

Only main screen supports Optimization>Refresh Settings. The

refresh settings of the app on the secondary screen will not take

effect.

The Optimization > Display settings of both apps on both screens

are in effect.
11. Settings
You can manage ONYX accounts, check device model and manage

system global settings.

ONYX Account

You can manage multiple accounts and switch them. Select

accounts from the list. Only account information is kept and login

state is not maintained. After switching to a different account, you

need to log in again.

If you log in to different accounts with different servers, please

change the server as well when switching accounts.

ONYX account included: BooxDrop, Reading Statistics, PushRead,

Send to E-mail.
Account Link: After the main account is logged in, you can associate

two other login methods sharing the same ONYX account. Mobile

and E-mail accounts support unbinding, and WeChat accounts do

not support unbinding.

About Device

It contains model name, Android version, MAC address and

firmware version.

Click the model number for more information, including Capacitive

Touch Version, VCom, Other information, Factory Reset, etc.

Note: To run the function of factory reset would remove all of the

user data. Please make a data backup first.

Languages & Input

Users can set system language, keyboard and input method and

TTS on this page;

Users can set languages of the system and virtue keyboard. The

system has an Android keyboard by default. Users can install

third-party Apps for more input methods.

ONYX Keyboard

Typing, handwriting input and voice input are available for ONYX

keyboard, and network connection is necessary for first time.

English is the default language of the handwriting input and users

need to download the corresponding language package first if they

want to use handwriting input for other languages.

Date & Time

Users can choose either auto setting or manual setting for date and

time. When the device is connected with internet, it will

automatically set date and time according to local time zone.

Manual setting requires to set time zone, date and time, and users

can select their preferred time and date display format;

Power

Users can set screen auto sleep timeout, Power off timeout, Delay

disconnection when the device goes to sleep mode, Battery usage、

Battery percentage、Auto-sleep when closing the cover, etc.

Network

This is for Wi-Fi \VPN\Bluetooth setting. When Wi-Fi is connected,

users can browse webs and download books via the internet on the

device.

Wi-Fi Settings

Slide Wi-Fi On, then available networks will be listed. Users can

choose a network, then input password to connect with internet.

After Wi-Fi is connected successfully at the first time, the device will

save Wi-Fi information automatically. Users only need to turn on

Wi-Fi on notification bar if using the same WIFI next time.

Click the “+” button at the top right of the Wi-Fi page, users could

manually connect to other network which is not listed, such as

802.1xEAP.
Bluetooth Settings

Turn on Bluetooth, you can search for nearby Bluetooth devices

and then send connection requests.

Bluetooth needs to be paired before use. Currently only support the

eReader to receive documents, send documents from Boox

eReader to other devices is not supported.

VPN Setting

 When the VPN is turned on for the first time, the system requires

to set a password. This password needs to be used only for

screen unlock or when the factory settings are restored.

System Bar

You can customize the pull-down menu. Pull-down menu from left

and right sides are different.. The left pull-down is the Notification

Center, and the right pull-down is the Control Panel;

Other accounts

You can manage other accounts including Google, DropBox,

OneNote,etc.

These accounts are only used for syncing notes.

Password

You can set 4-16 digital screen-lock password.

The Android 11 models do not support resetting the password,

please keep the password properly by yourself.

System Display

System Font size

Support to adjust the system font size, the default is the standard

font size, you can set a total of 4 sizes: small, standard, large,

extra-large;
Custom Homepage

The default Homepage is Library. You can set any of the other

Function pages as the Homepage. You can return to the Homepage

by tapping the homepage icon from the dropdown notification

center.

System full screen refresh frequency

The system performs one full refresh every 5 operations

The Library and Notes will be automatically refreshed once more

due to the loading list, and the actual number of operations will be

one less than the set number;

Function Area display icons only

The text under the Function icon can be hidden.

Enable Book Store

The built-in book store can be turned off, but cannot be uninstalled

or removed.
Gesture Manager

You can customize 3 gestures for the bottom and 2 gestures for the

sides.

The default functions for the Bottom include: Back, Back Home,

Multitasking Switching…etc. Swipe up from the bottom to use them.

The default functions for the sides are Volume +/-, and Frontlight

+/-. Long press the sides to slide up and down to adjust.

Support modification to other functions;
Server

The server is allocated according to the system language by default.

The Chinese language system uses the Asia server, and the other

language systems use US server;

After manually selecting the server, it will no longer be automatically

matched according to the system language;

Please choose the server in your area. This will avoid the slow

network connection which impacts the use of some specific

functions (including bookstore, synchronization, application market,

OTA detection and other functions that require networking);

Firmware Update

Users can get the Model number, Android version, Build number

and update check. Upgrade checks the local package first then

online package with a network connection. Upgrade pause and

breakpoint download are allowed. Please ensure the device has

more than 30% power and sufficient capacity before the update.
Update History

Check Update History and the changelog of every update.

Feedback

FAQ

If having any problems, you can directly find the questions in the

FAQ, quickly locate and solve the problems.

Submit Feedback

Welcome to submit any technical problem or advice to us.

This function collects system information for problem judgment.

And Onyx shall never disclose users’ device information.

The related logs will be cleared after the device shuts down. If you

need to send feedback after the device is off, please enable Save

Logs to local in Feedback so that you can send related logs after

restarting the device.

12. Specifications

NoteAir2 NoteAir2Plus

Processor 2.0GHz*4 + 1.8GHz*4

RAM 4G LPDDR4X

OS Android 11

Storage 64G

Screen E-ink display with Regal refresh

Screen Size 10.3 inch

Resolution 1404*1872

Touch Stylus + Capacitive touch

Front Light Support

Wireless WIFI（2.4G+5G）+ Bluetooth（5.0）

Battery 3000 mAh

USB Type-C（support USB OTG）

Others Mic, Dual Speaker

Size 229.4X195.4X5.8mm
 Weight ≤420 g (battery included)

Operating 0°C- 50°C

Temperature

Book Formats PDF, EPUB , TXT, DJVU, HTML, FB2, DOC, MOBI, CHM,

etc.

Image Formats PNG, JPG, BMP

Audio Formats WAV , MP3

Apps Third party APP installation is supported

Browser Support

Language Multi-language supported

Firmware Locally update and OTA update are available

Update

Certification CE、RoHS、CCC、FCC、SRRC、TELEC

13. Declaration
Onyx International Inc. reserves the right to modify the content of

the Quick Start Guide and User Manual without further notice.

For more information, please visit our website at www.boox.com.