RMD Enviro Engineers Pvt Ltd
BOQ WITH STAND BY EQUIPMENT OF ETP 15 KLD & STP 15 KLD FOR HOMEMADE BAKER'S INDIA LIMITED - SANDILA,
HARDOI (U.P)
S. No Particulars Unit Qty
EFFLUENT & SEWAGE TREATMENT PLANT
Supplying, installing, testing & commissioning of 15 KLD
Effluent & 15 KLD Sewage Treatment Plant
A RCC Civil Tanks : (Client Scope).
a) ETP Bar Screen Chamber (0.60X0.45X1.0) Mtr. Civil No. 1
b) ETP Oil & Grease Chamber (0.60X0.45X1.0) Mtr. Civil No. 1
c) ETP Equalization Tank (2.50X3.0X3.0) Mtr. Civil No. 1
d) STP Bar Screen Chamber (0.60X0.45X1.0) Mtr. Civil No. 1
e) STP Oil & Grease Chamber (0.60X0.45X1.0) Mtr. Civil No. 1
f) STP Equalization Tank (2.50X3.0X3.0) Mtr. Civil No. 1
g) Filter Feed Tank (2.0X3.0X3.0) Mtr. Civil No. 1
h) Sludge Holding Tank (2.0X3.0X3.0) Mtr. Civil No. 1
i) Machinery Foundation (As per Required) Civil No. 1
Pre- Fabricated MSFRP Tank @ 4mm Sheet thickness
B with Internal 2 Layer FRP Coating & Outer Side Paint
with Primer : (Our Scope).
a) Flash Mixture Tank (Volume: 1.0 KL) MSFRP No. 1
b) Flocculation Tank (Volume: 1.0 KL) MSFRP No. 1
c) Primary Tube Settler Tank (3.0 KL) MSFRP No. 1
d) Mbbr Tanks (4.50 KL) Each MSFRP No. 2
e) Secondary Tube Settler Tank (4.50 KL) MSFRP No. 1
C Electro-Mechanical Works (Our Scope of Supply)
1 SS-304 Bar Screen as per required Size Nos. 2
Coagulation & Flocculation Agitator with Motorized
2 Nos. 2
(Moc. SS-304)
3 Raw Effluent Transfer Pump
Flow rate (each) 3.0 M3/H
Head 8 Mtr.
Make: Kirloskar
Motor 1 HP, Single Phase
Qty 2 (1W+1S) Nos. 2
4 Chemical PVC Dosing Tank with Fitting
Make Sheetal / Ganga
Capacity 100 Ltr.
Qty 03 Nos. Nos. 3
5 ETP Sludge Recirculation Pumps
Flow rate (each) 1.50 m3 /H
Head 12 Mtr.
Make: Kirloskar
Motor 0.50 HP, Single Phase
Quantity 2 (1W+1S) No. 2
3 Raw Sewage Transfer Pump
Flow rate (each) 3.0 M3/H
Head 8 Mtr.
Make: Kirloskar
Motor 1 HP, Single Phase
Qty 2 (1W+1S) Nos. 2
5 STP Sludge Recirculation Pumps
Flow rate (each) 1.50 m3 /H
Head 12 Mtr.
Make: Kirloskar
Motor 0.50 HP, Single Phase
Quantity 2 (1W+1S) No. 2
2 Nos. (1W+1S) (Blower Make: Akash / A1 / Equvalent)
Twin Lobe Air Blowers capable of delivering 35 m3/hr. of
free air each at 3000 MMWG driven through “V” belt or
6 directly coupled through flexible coupling to a TEFC
motor of required capacity suitable for 415 ± 10% volts, 3
phase, 50 cycles A.hC. supply (Motor Make: ABB / BBL /
Equivalent)
2 (1W+1S) Nos. 2
PPR Piping for Aeration complete with fittings with
7
required tees, crosses,
plugs, sockets, elbows, reducers, supports
& clamps, including painting the pipes with desired shade
lot 1
of colour coding (Air piping).
8 Filter Feed Pumps
Flow rate (each) 2.0 M3/H
Head 20 to 25 Mtr.
Make: Kirloskar
Motor 0.50 HP, 3 Phase
Quantity 2 (1W+1S) Nos. 2
Supplying, installing, testing and commissioning of
tertiary treatment systems comprising of a FRP pressure
9 sand multigrade filter with 40 MM MPV. Filters shall be
suitable for flow rate of 1800 to 2000 LPH at 3.5 Kg/Sqcm
working pressure (Pantair)
Size 16X65 Nos. 1
Supplying, installing, testing and commissioning of
tertiary treatment systems comprising of a FRP Activated
10 Carbon filter with 40 MM MPV Will be suitable for flow
rate of 1800 to 2000 LPH at 3.5 Kg/Sqcm working
pressure (Pantair)
Size 16X65 Nos. 1
PVC 10 kg/cm2 Piping with fittings of Prince brand such
11 as tees, crosses, plugs, sockets, elbows, reducers, supports
& clamps,
(Make Make Prince & Supreme) Lot 1
12 Mbbr Media
Mbbr Media Lot 1
13 Tube Settler Media
PVC Tube Media Lot 1
14 Filter Press Feed Pump (Screw Type)
Flow rate (each) 1.0 m3 /H
Head 18 Mtr.
Make: Helicon
Motor 1.0 HP, Three Phase
Quantity 1 Nos No. 1
15 Filter Press
Type: Hydraulic motorized along with 1 HP Motor
Plate Thickness: 45mm +/- 2mm (MS Structure)
Make: Vasu Pharmatech
Model: VPFP 18
No. of Chambers: 17
Cake Holding Capacity: 120 Ltr.
Quantity: 1 Nos. Nos. 1
16 Electrical Panel
Supply Installation, testing & commissioning of Electrical
Panel suitable for 415 V, 3 Phase, 4 wies, 50Hz power
distribution system. The panel shall be free standing floow /
wall mounted, sheet metal enclosed flush front dust & venim
No. 1
proof with Aluminium bus bars. The painting shall be done as
per relevant ISI codes as specified. Adequate size cable alley
shall be provided for each cable bending & termination. (All
components would be L&T/Schnieder). Make: RMDEEPL
Providing & Fixing Complete Aluminium wiring and cables
17 Lot 1
tray for the above equipments
18 INSTRUMENTATION
a) Electromagnetic Flow meter (Make: Aster / Equivalenrt) No. 3
b) Online PH Meter (Make: Aster / Equivalent) No. 1
c) Fine tubular air bubble diffusers for Mbbr Tanks No. 8
d) Course bubble diffusers No. 6
e) Pressure Guages (make: H-Guru) 0 to 4 kg. Pressure No. 5
