TM SERIES

(WATER METERS)

FLOMEC® TM Series Water Meters are accurate, eco-

nomical and designed to last. Choose TM Water Meters for
water processing and irrigation applications:
• Meets Schedule 80 PVC specifications
• Standard low-profile display
• Seven sizes with three fitting types available
• Flow rates from 1 to 600 gallons per minute
(3.8 to 2271 L/min)

SPECIFICATIONS FEATURES / BENEFITS

Fitting Type: Schedule 80 Spigot (Pipe) End • Easy to install
NPT (Female) • Displays in gallons, litres and cubic feet
BSP (Female) (1 in., 1-1/2 in., & 2 in. meters only) • Indicates Batch, Cumulative Totals and Rate of Flow
150# ANSI Flange or DIN 100 Flange (3 in. & 4 in. • Available in Spigot, NPT, BSP (1 in., 1-½ in. and 2
meters only) in. only), 150# ANSI Flange (3 in. and 4 in. only) and
Meter Sizes Available: 1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in., 3 in., 4 in. DIN Flange (3 in. and 4 in. only) fittings
Flow Range: 1/2 in. (05) 1 - 10 GPM (3.8 - 38 L/min) • Non-volatile totals means amounts are retained
3/4 in. (07) 2 - 20 GPM (7.6 - 76 L/min) when batteries are replaced or power is lost
1 in. (10) 5 - 50 GPM (19 - 190 L/min) • Alkaline battery life: 2 years
1-1/2 in. (15) 10 - 100 GPM (38 - 380 L/min)
2 in. (20) 20 - 200 GPM (76 - 760 L/min)
3 in. (30) 40 - 400 GPM (151 - 1514 L/min) APPLICATIONS
4 in. (40) 60 - 600 GPM (227 - 2271 L/min)
Accuracy (% of Reading): ± 3.0%
• OEM water treatment equipment / skids
Pressure Rating (1/2 - 2 in.): 225 psi (15.3 bar) @ 73° F (23° C)
• Sub-metering of facility water usage
BSP 150 psi (10.3 bar) @ 73° F (23° C)
• Waste water treatment equipment
Pressure Rating (3 - 4 in.): 225 psi (15.3 bar) @ 73° F (23° C)
DIN 135 psi (9.1 bar) @ 73° F (23° C)
• Irrigation
For CE Applications 135 psi (9.1 bar) @ 73° F (23° C) • Batching
Operating Temperature • Plant process water
+32° F to +140° F (0° C to +60° C)**
Range:
• Water based cooling systems
Typical 1/2 in. (05) 2,500 PPG (660 Pulses/L)
K-Factor: • Chemical feed systems
3/4 in. (07) 1,100 PPG (291 Pulses/L)
1 in. (10) 565 PPG (149 Pulses/L)
• Monitoring clean fluids
1-1/2 in. (15) 215 PPG (57 Pulses/L) • Cooling towers
2 in. (20) 100 PPG (26 Pulses/L) • Blending
3 in. (30) 43 PPG (11 Pulses/L)
4 in. (40) 17 PPG (4.5 Pulses/L)
Wetted Housing: PVC
Materials Bearings: 96% Alumina Ceramic CERTIFICATIONS
(1/2 - 2 in.):
Shaft: Tungsten Carbide
Rotor: PVDF
Rings: 316 Stainless Steel
Wetted Housing: PVC
Materials Bearings: PEEK
(3 - 4 in.):
Shaft & Thrust Washers: Stainless Steel
Rotor & Nose Cone: Acetal
Signal Ferrite
Generator:
Calibration
N.I.S.T. – Certification available
Certificate:

**PVC pressure rating will incrementally decrease above 73o F (23o C).
TM SERIES (WATER METERS)
DIMENSIONS
Meter Size Length Height Width Meter Size Length Height Width Meter Size Length Height Width
& Fitting & Fitting & Fitting
4.3 in. 2.5 in. 2.1 in. 5.5 in. 4.1 in. 2.4 in. 14.7 in. 5.78 in. 4.37 in.
05 Spigot 20 Spigot 30 NPT
(109 mm) (63 mm) (53 mm) (140 mm) (104 mm) (61 mm) (373 mm) (147 mm) (111 mm)
6.0 in. 2.7 in. 2.1 in. 20 NPT / 7.9 in. 4.4 in. 3.5 in. 17.0 in. 6.7 in. 5.87 in.
05 NPT 40 NPT
(152 mm) (68 mm) (53 mm) BSP (200 mm) (112 mm) (89 mm) (432 mm) (170 mm) (149 mm)
4.4 in. 2.7 in. 2.1 in. 11.5 in. 5.34 in. 3.5 in. 30 ANSI 12.0 in. 7.5 in. 7.5 in.
07 Spigot 30 Spigot
(112 mm) (68 mm) (53 mm) (292 mm) (136 mm) (89 mm) Flange (305 mm) (190 mm) (190 mm)
6.1 in. 2.9 in. 2.1 in. 13.5 in. 6.34 in. 4.5 in. 40 ANSI 14.0 in. 9.0 in. 9.0 in.
07 NPT 40 Spigot
(155 mm) (73 mm) (53 mm) (343 mm) (161 mm) (114 mm) Flange (356 mm) (229 mm) (229 mm)
4.5 in. 2.9 in. 2.1 in. Length guidelines are estimates; actual length can vary up to ± 1/2 in.(13 mm).
10 Spigot
(114 mm) (73 mm) (53 mm)
P9 & 42 Electronics adds 0.90 in. (23 mm) to height.
10 NPT / 6.5 in. 3.1 in. 2.1 in.
BSP (165 mm) (79 mm) (53 mm)
5.4 in. 3.6 in. 2.1 in.
15 Spigot
(137 mm) (91 mm) (53 mm)
B

15 NPT / 7.6 in. 3.8 in. 2.3 in. B

BSP (193 mm) (96 mm) (58 mm)

C A
A C

1/2 in. thru 2 in. 3 in. & 4 in.

ACCESSORIES
Part No. Description
113275-10 FM Approved Remote Kit - Q9 Display (will not make meter FM Approved)
125260-02 90o Display Adapter Kit – Q9 Display
125100-10 4-20Ma / Pulse out put module

GreatPlainsIndustries.com | Product Support: 800-835-0113 | [email protected]

FLOMEC.com.au | Product Support: +61 2 9540 4433 | [email protected]
IND-1043 Rev D EN 11/23