Simulation of ACP-E04

Date: sábado, 14 de diciembre de 2024

Designer: Solidworks
Study name: Static 1
Analysis type: Static

Table of Contents
Description .......................................... 1
Assumptions ......................................... 2
Model Information ................................. 2
Study Properties .................................... 3
Units ................................................. 3
Material Properties ................................ 4
Description Loads and Fixtures ................................. 6
Connector Definitions ............................. 6
Se realiza el análisis de carga de los estantes construidos
Mesh information ................................... 7
para almacenamiento de herramientas, repuestos y Resultant Forces ................................... 7

componentes mecánicos con el objetivo de verificar su Study Results ....................................... 8

Conclusion.......................................... 10
integridad estructural y determiner su capacidad de carga
real.

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 1

Assumptions
- Se asume el material de acuerdo a la norma ASTM A36.
- Material isotrópico, elástico y lineal.
- Se asume la línea de acción de la carga vertical hacia abajo en cada elemento estructural de cada
una de las divisiones del estante.

Model Information

Model name: ESTANTE 04

Current Configuration: Default

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 2

Study Properties
Study name Static 1
Analysis type Static
Mesh type Shell Mesh Using Mid-surfaces
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SOLIDWORKS Off
Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (D:\1. EMPRESAS\8.
CONFIPETROL ANDINA SA\2024\CALCULO
ANAQUELES\ACP-E04)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 3

Material Properties
Model Reference Properties Components
Name: ASTM A36 Steel SolidBody 1(Cut-
Model type: Linear Elastic Isotropic Extrude2)(E04-001-1),
Default failure Max von Mises Stress SolidBody 1(Cut-
criterion: Extrude2)(E04-001-2),
Yield strength: 2.5e+08 N/m^2 SolidBody 1(Cut-
Tensile strength: 4e+08 N/m^2 Extrude2)(E04-001-3),
Elastic modulus: 2e+11 N/m^2 SolidBody 1(Cut-
Poisson's ratio: 0.26 Extrude2)(E04-001-4),
Mass density: 7,850 kg/m^3 SolidBody 1(Base-
Shear modulus: 7.93e+10 N/m^2 Flange1)(E04-002-1),
SolidBody 2(Cut-
Extrude2[2])(E04-002-1),
SolidBody 3(Cut-
Extrude2[1])(E04-002-1),
SolidBody 1(Base-
Flange1)(E04-002-2),
SolidBody 2(Cut-
Extrude2[2])(E04-002-2),
SolidBody 3(Cut-
Extrude2[1])(E04-002-2),
SolidBody 1(Base-
Flange1)(E04-002-3),
SolidBody 2(Cut-
Extrude2[2])(E04-002-3),
SolidBody 3(Cut-
Extrude2[1])(E04-002-3),
SolidBody 1(Base-
Flange1)(E04-002-4),
SolidBody 2(Cut-
Extrude2[2])(E04-002-4),
SolidBody 3(Cut-
Extrude2[1])(E04-002-4),
SolidBody 1(Base-
Flange1)(E04-002-5),
SolidBody 2(Cut-
Extrude2[2])(E04-002-5),
SolidBody 3(Cut-
Extrude2[1])(E04-002-5),
SolidBody 1(Base-
Flange1)(E04-002-7),
SolidBody 2(Cut-
Extrude2[2])(E04-002-7),
SolidBody 3(Cut-
Extrude2[1])(E04-002-7),
SolidBody 1(Base-
Flange1)(E04-002-8),
SolidBody 2(Cut-
Extrude2[2])(E04-002-8),
SolidBody 3(Cut-
Extrude2[1])(E04-002-8),

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 4

 SolidBody 1(Base-
Flange1)(E04-002-9),
SolidBody 2(Cut-
Extrude2[2])(E04-002-9),
SolidBody 3(Cut-
Extrude2[1])(E04-002-9),
SolidBody 1(Base-
Flange1)(E04-003-1),
SolidBody 1(Base-
Flange1)(E04-003-2),
SolidBody 1(Base-
Flange1)(E04-003-3),
SolidBody 1(Base-
Flange1)(E04-003-4),
SolidBody 1(Base-
Flange1)(E04-004-1),
SolidBody 1(Base-
Flange1)(E04-004-2),
SolidBody 1(Base-
Flange1)(E04-004-3),
SolidBody 1(Base-
Flange1)(E04-004-4),
SolidBody 1(Base-
Flange1)(E04-004-5),
SolidBody 1(Base-
Flange1)(E04-004-6)
Curve Data:N/A

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 5

Loads and Fixtures
Fixture name Fixture Image Fixture Details
Entities: 20 face(s)
Type: Fixed Geometry
Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) -0.00565338 6,920.13 -0.0477581 6,920.13
Reaction Moment(N.m) -0.000495192 -0.00139832 0.0053055 0.00550897

Load name Load Image Load Details

Reference: Top Plane
Values: 0 0 -9.81
Units: m/s^2
Gravity-1

Entities: 8 face(s)
Type: Apply normal force
Value: 80 kgf
Force-1

Connector Definitions
No Data

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 6

Mesh information
Mesh type Shell Mesh Using Mid-surfaces
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 81.2185 mm
Minimum element size 4.06092 mm
Mesh Quality High

Mesh information - Details

Total Nodes 651866
Total Elements 319620
Time to complete mesh(hh;mm;ss): 00:01:49
Computer name:

Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -0.00565338 6,920.13 -0.0477581 6,920.13

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m -0.000495192 -0.00139832 0.0053055 0.00550897

Free body forces

Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -0.0017427 -0.0257298 0.00219065 0.0258816

Free body moments

Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0.00108592 -0.00456804 0.00649513 0.00801455

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 7

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 8.261e+03N/m^2 1.691e+08N/m^2
Node: 414381 Node: 182976

ESTANTE 04-Static 1-Stress-Stress1

Name Type Min Max

Displacement1 URES: Resultant Displacement 0.000e+00mm 1.611e+00mm
Node: 159 Node: 142994

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 8

 ESTANTE 04-Static 1-Displacement-Displacement1

Name Type Min Max

Strain1 ESTRN: Equivalent Strain 7.471e-08 4.783e-04
Element: 304384 Element: 86044

ESTANTE 04-Static 1-Strain-Strain1

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 9

Name Type Min Max
Factor of Safety1 Automatic 1.394e+00 1.000e+16
Node: 241331 Node: 31161

ESTANTE 04-Static 1-Factor of Safety-Factor of Safety1

Conclusion

Se obtiene un factor de seguridad de 1.4 para una carga de 160 kgf por cada division del estante,
por lo tanto el diseño es aceptable.

Analyzed with SOLIDWORKS Simulation Simulation of ESTANTE 04 10

 8 7 6 5 4 3 2 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
38
1 E04-001 PUNTALES C 1-1/2x1-1/2", e=2.5 mm 4
2086
F 2 E04-002 LARGUERO e = 2.0 mm 8 F

38
3 E04-003 TRAVESAÑO C 1x1", e=1.5 mm 4
DETAIL A
410

SCALE 1 : 5 25 4 E04-004 DIAGONAL c 1 x 1", e 0 1.5 mm 6

A

25
E E

DETAIL B
SCALE 1 : 5 1
22

D 3 D

C C
2000

1528
1078
528

B 410 B

CONFIPETROL NEWMONT

NOMBRE FIRMA FECHA PROYECTO:

DIBUJO Alex R. 13/12/2024
REVISADO Carlos S. 13/12/2024 ESTANTE ALMACEN HERRAMIENTAS CP
APROBADO
A TÍTULO: A
ESTANTE A4
N.º DE DIBUJO A3
MATERIAL: ASTM A36 CP-001-A4 REV: 0
PESO: Kg ESCALA: 1:20 UNIDADES: mm HOJA: 1 / 1
8 7 6 5 4 3 2 1
 ESQUEMA UBICACION ESTANTES

ESTANTE A1

ALMACEN DE HERRAMIENTAS CONFIPETROL

YANACOCHA NORTE
ESTANTE A2

ESTANTE A4 ESTANTE A3