LS 2022-2023 Catalogue
LS 2022-2023 Catalogue
1
L S - G a o n C a b l e M y a n m a r
• Application Used for overhead power transmission line and power distribution line
Conductor (Steel)
Conductor (Al)
Water Blocking
Conductor Screen
Insulation
22
Power Cable
Typical Construction of Cables
Conductor Construction and D.C. Conductor Resisance
0.6/1kV Cu/XLPE/PVC, Al/XLPE/PVC, Cu/XLPE/ LSZH(0.6/1kV CV, 0.6/1kV AL-CV, 0.6/1kV HF-CO)
0.6/1kV Cu/XLPE/PVC/SWA(AWA)/PVC, 0.6/1kV AL/XLPE/PVC/SWA(AWA)/PVC
0.6/1kV Cu/XLPE/LSZH/SWA(AWA)/LSZH (0.6/1kV CV(A)WAV, 0.6/1kV AL-CV(A)WAV, 0.6/1kV HF-CO(A)WAO)
30
P o w r C a b l e
Conductor
Insulation
Filler
Binder
Oversheath
Conductor
Insulation
Filler
Binder
Inner covering
Oversheath
Description
Conductors : The conductors shall be class 2 of plain annealed Copper or Aluminum in accordance with IEC 60228.
Insulation : Insulation shall be crosslinked Polyethylene or PVC complying with test requirements of IEC 60502 & IEC 60811.
Laying Up : In case of multi core cables, the multi cores are laid up together with e.g polypropylene yarn filler at the interstices between the cores.
A binder e.g. polypropylene tape is wrapped round the assembly to form a compact circular cable during this process.
Inner Covering : Inner covering shall be extruded PVC as per IEC 60502. PE, LSZH (Low Smoke Zero Halogen) are available on request.
Armour : Armour shall be as per IEC 60502 of the following type :
a) Round Wire Armour
Armour material shall be galvanized steel for multi core cables and aluminum for single core cables. This is as per IEC 60502 recommendation.
Oversheath : Oversheath shall be extruded PVC/ST1 or ST2 as per IEC 60502, special type of sheathing such as Flame retardant(FR-), Antitermite(/AT),
Anti-rodent( /AR) and Anti-vermin( /AV), etc. are avaiible on request. PE or LSZH(HF- : Halogen free Flame retardant) are available on request.
31
L S - G a o n C a b l e M y a n m a r
Conductor
Maximum Resistance of Conductor
o
Nominal Minimum Number Approx. D.C at 20 C
Cross-Sectional Area of Wires in the Conductor (No.) Diameter (Ω / km)
mm2 Copper Aluminum mm Copper Aluminum
1.5 7 -- 1.59 12.1 --
2.5 7 -- 2.01 7.41 --
4 7 7 2.55 4.61 7.41
6 7 7 3.12 3.08 4.61
10 7 7 4.05 1.83 3.08
16 6 6 4.7 1.15 1.91
25 6 6 5.9 0.727 1.20
35 6 6 6.9 0.524 0.868
50 6 6 8.1 0.387 0.641
70 12 12 9.8 0.268 0.443
95 15 15 11.4 0.193 0.320
120 18 15 12.9 0.153 0.253
150 18 15 14.4 0.124 0.206
185 30 30 15.9 0.0991 0.164
240 34 30 18.3 0.0754 0.125
300 34 30 20.5 0.0601 0.100
400 53 53 23.2 0.0470 0.0778
500 53 53 26.4 0.0366 0.0605
630 53 53 30.2 0.0283 0.0469
* ( ) : Weight of cable for Aluminum conductor
* Weight can be different depending on item
32
P o w r C a b l e
Conductor
Insulation
Oversheath
33