NC BATIMENT EXTRACTION NV01
NC BATIMENT EXTRACTION NV01
for
Project Name: Project Name
Location: Enter address here, ,
Drawing Name: EMAPHOS BATIMENT EXTRACTION U71 NV01 Calculation Date:01/02/2023
Design
Remote Area Name: RA01
Density 10 L/min/m²
Contact Name
Address: ,
Phone Number: Name of Designer:
Notes:
Water Supply
Summary Sheet
Node: 1
A negative result in Required Pressure indicates that the Pump is capable of furnishing all of the pressure required by the demand reported within this calculation.
No pressure is being required from the Source/Supply to meet the demand (by a margin of this negative value).
Supply Analysis
Static Residual Flow Available Total Demand Required Pressure
Node Name @ @
(barre) (barre) (L/min) (barre) (L/min) (barre)
1 Water Supply 10.50 barre 6.50 barre 3750 L/min 7.36 barre 3290 L/min 4.23 barre
Node Analysis
Node Number Elevation (Milli Node Type Pressure at Discharge at Notes
mètres) Node Node
(barre) (L/min)
Sprinklers
126 7629 1.95 barre 60 L/min
Sprinklers
139 7629 1.92 barre 60 L/min
Sprinklers
132 7629 1.92 barre 60 L/min
Sprinklers
101 7624 1.94 barre 60 L/min
Sprinklers
109 7628 1.90 barre 60 L/min
Sprinklers
120 7629 1.91 barre 60 L/min
Sprinklers
102 7624 2.45 barre 68 L/min
Sprinklers
103 7624 2.44 barre 67 L/min
Sprinklers
133 7629 2.48 barre 68 L/min
Sprinklers
125 7629 1.93 barre 60 L/min
Sprinklers
138 7629 1.89 barre 59 L/min
Sprinklers
131 7629 1.90 barre 60 L/min
Sprinklers
114 7628 1.92 barre 60 L/min
Sprinklers
108 7628 1.88 barre 59 L/min
Sprinklers
119 7629 1.89 barre 59 L/min
Sprinklers
124 7629 1.91 barre 60 L/min
Sprinklers
137 7629 1.88 barre 59 L/min
Sprinklers
130 7629 1.89 barre 59 L/min
Sprinklers
113 7628 1.90 barre 60 L/min
Sprinklers
107 7628 1.86 barre 59 L/min
Sprinklers
118 7629 1.87 barre 59 L/min
Sprinklers
123 7629 1.90 barre 60 L/min
Sprinklers
136 7629 1.87 barre 59 L/min
Sprinklers
129 7629 1.88 barre 59 L/min
Sprinklers
112 7628 1.89 barre 59 L/min
Sprinklers
106 7628 1.85 barre 59 L/min
Sprinklers
117 7629 1.86 barre 59 L/min
Sprinklers
122 7629 1.90 barre 60 L/min
Sprinklers
135 7629 1.87 barre 59 L/min
Sprinklers
128 7629 1.87 barre 59 L/min
Sprinklers
111 7628 1.89 barre 59 L/min
Sprinklers
105 7628 1.85 barre 59 L/min
Sprinklers
116 7629 1.86 barre 59 L/min
Sprinklers
121 7629 1.90 barre 60 L/min
Sprinklers
134 7629 1.86 barre 59 L/min
Sprinklers
127 7629 1.87 barre 59 L/min
Sprinklers
110 7628 1.89 barre 59 L/min
Sprinklers
104 7628 1.85 barre 59 L/min
Sprinklers
115 7629 1.86 barre 59 L/min
Supply
1 600 4.23 barre 2340 L/min
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
1 3290 L/min
Total(Pt) Route 1
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Pipe Information
Flow added Length C Factor or Notes
Elev 1 Fittings & Total(Pt)
Node 1 K-Factor this step Nominal ID Millimètres Roughness Fitting/Device (Equivalent Length)
Millimètres Devices
Q
Fitting
Pf Friction Elev(Pe)
Millimètres Fixed Pressure Losses, when
Equiv.
Elev 2 Total Flow Loss Per Unit
Node 2 Velocity Actual ID Length Total applicable, are added directly to (Pf)
Millimètres Q barre
Millimètres Friction(Pf) and shown as a negative value.
Millimètres
Fittings Legend