Scribd
Upload
76 views

UNF Thread standard

The document provides specifications for UNF (Unified National Fine) threads according to ANSI/ASME B1.1 standards. It includes details such as nominal diameter, major diameter in inches and millimeters, tapping drill size, and pitch in threads per inch (TPI) for various sizes ranging from #0 to 1 1/2". This information is essential for understanding the dimensions and requirements for UNF threaded fasteners.

Uploaded by

rajeshrk221197
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views

UNF Thread standard

The document provides specifications for UNF (Unified National Fine) threads according to ANSI/ASME B1.1 standards. It includes details such as nominal diameter, major diameter in inches and millimeters, tapping drill size, and pitch in threads per inch (TPI) for various sizes ranging from #0 to 1 1/2". This information is essential for understanding the dimensions and requirements for UNF threaded fasteners.

Uploaded by

rajeshrk221197
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UNF Thread ANSI/ASME B1.

Major Major Tapping Drill Pitch


Nominal Diameter TPI
Diameter (Inch) Diameter (mm) Size (mm) (mm)
#0 - 80 UNF 0.060 1.524 1.25 80 0.317
#1 - 72 UNF 0.073 1.854 1.55 72 0.353
#2 - 64 UNF 0.086 2.184 1.90 64 0.397
#3 - 56 UNF 0.099 2.515 2.15 56 0.453
#4 - 48 UNF 0.112 2.845 2.40 48 0.529
#5 - 44 UNF 0.125 3.175 2.70 44 0.577
#6 - 40 UNF 0.138 3.505 2.95 40 0.635
#8 - 36 UNF 0.164 4.166 3.50 36 0.705
#10 - 32 UNF 0.190 4.826 4.10 32 0.794
#12 - 28 UNF 0.216 5.486 4.70 28 0.907
1/4" - 28 UNF 0.250 6.350 5.50 28 0.907
5/16" - 24 UNF 0.313 7.938 6.90 24 1.058
3/8" - 24 UNF 0.375 9.525 8.50 24 1.058
7/16" - 20 UNF 0.438 11.112 9.90 20 1.270
1/2" - 20 UNF 0.500 12.700 11.50 20 1.270
9/16" - 18 UNF 0.563 14.288 12.90 18 1.411
5/8" - 18 UNF 0.625 15.875 14.50 18 1.411
3/4" - 16 UNF 0.750 19.050 17.50 16 1.587
7/8" - 14 UNF 0.875 22.225 20.40 14 1.814
1' - 12 UNF 1.000 25.400 23.25 12 2.117
1 1/8" - 12 UNF 1.125 28.575 26.50 12 2.117
1 1/4" - 12 UNF 1.250 31.750 29.50 12 2.117
1 3/8" - 12 UNF 1.375 34.925 32.75 12 2.117
1 1/2" 12 UNF 1.500 38.100 36.00 12 2.117

You might also like