Simplex HARDWARE

Cylinders & Keying

KEY & CYLINDER MARKING
Key and Cylinder Marking

With these options, keys and/or cylinders are stamped with the key symbol (code). This tells how the cylinder is keyed.
Lock mix-ups during installation or key mix-ups afterward are less likely to happen - and easier to straighten out.

For example, the symbol AA1 shown in the illustration identifies the lock to be operated by grand master key A, master key AA
and change key AA1.

Visual Key Control (VKC)

For greater convenience

The key symbol is stamped on the plug face or other visible portion of the front of the cylinder. This makes identification fast and
convenient. Keys can be easily matched to the locks they operate. Also, restamping cylinders when they are rekeyed results in
damage to the finish.

Full Size Core Only

Number Mechanism
Mortise Standard Cylinders
88-300 Conventional 6 pin core
Mortise Cylinder 88-301 Conventional 7 pin core

Cylinders are furnished with standard straight

cam and unless otherwise specified.
Thumbturn Cylinder 80-080T
Specify Finishes: 605, 606, 612, 613, 626, 629, 630
Furnished with standard cam
Catalog Number Length Pins unless otherwise specified
4046-SC 1-1/8” 5 or 6 Specify finishes: 605, 606, 612, 613,
4046-SC 1- 1/4” 5 or 6 626, 629, 630
4046-SC 1- 3/8” 6 or 7
4046-SC 1- 1/2” 6 or 7
4046-SC 1- 3/4” 6 or 7
Rim Cylinder 70-156SC
Mortise Cylinder Housing Rim Cylinder Housing 75-236
Furnished with standard cam unless
otherwise specified Horizontal tailpiece standard.
Standard housings furnished with standard May be changed to vertical
straight cam and hotel function housings orientation in the field.
furnished with standard cloverleaf cam. See Furnished with collar, back
table for product numbers. plate and 12-24 break off
screws.
Specify finishes: 605, 606, 612, 613, 626, 629, 630
Specify 5, 6 or 7- pin
Catalog Number Length Pins Application Specify finishes:
4046-I 1-1/8” 6 or 7 Generic 605, 606, 612, 613,
4046-I 1- 1/4” 6 or 7 Generic 626, 629, 630
4046-I 1- 3/8” 6 or 7 Generic
4046-I 1- 1/2” 6 or 7 Generic
4046-I 1- 3/4” 6 or 7 Generic
SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8 17
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Simplex HARDWARE

Overhead Holders & Stops

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8 31
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Simplex HARDWARE
Architectural Door Trim

Mounting

• All mounting hardware is for standard 1-3/4” door.

• Consult Customer Service other than standard.

Standard Mounting Wood Doors

PULL PLATE
PULL PLATE

Standard Mounting Concealed Pull Mounting With Push Plate

• (2) 1/4-20 x 2-1/4” brass, oval head machine screws; • (2) 1/4-20 x 2-1/4” steel flat head machine screws; zinc plated.
plated to match.
• (2) No. 14 countersunk washers; plated to match Plate on opposite side of door must be ordered separately.

Back-Back “Two-Anchor” Decorative Blind Thru - Bolt

Wood or Metal Door Wood or Metal Door

• (2) 1/4-20 x 2-3/4” steel countersunk trim head machine • (2) 1/4-20 x 2-1/4” blind thru - bolts; plated to match.
screws with
(4) set screws for maximum achoring force.
• (2) Steel screw sleeves; zinc plated.

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8 9
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Simplex HARDWARE
Pull Handles

Bolt Through (BT) Face Fixed (FF) Back to Back (BTB)

Meets ANSI A156.6 for J401 Pulls

Length Dia Finish Item Code Length Dia Finish

Item Code
(mm) (mm) (mm) (mm)
PHT.150.19BTB 150 19 SSS PHS.150.19BTB 150 19 SSS
PHT.205.19BTB 205 19 SSS PHS.205.19BTB 205 19 SSS
PHT.225.19BTB 225 19 SSS PHS.225.19BTB 225 19 SSS
PHT.250.19BTB 250 19 SSS PHS.250.19BTB 250 19 SSS
PHT.305.19BTB 305 19 SSS PHS.305.19BTB 305 19 SSS
PHT.350.19BTB 350 19 SSS PHS.350.19BTB 350 19 SSS

PHT.205.25BTB 205 25 SSS PHS.205.25BTB 205 25 SSS

PHT.225.25BTB 225 25 SSS PHS.225.25BTB 225 25 SSS
PHT.250.25BTB 250 25 SSS PHS.250.25BTB 250 25 SSS
PHT.305.25BTB 305 25 SSS PHS.305.25BTB 305 25 SSS
PHT.350.25BTB 305 25 SSS PHS.350.25BTB 305 25 SSS

Technical Data

Material: Stainless Steel

• All mounting hardware is for standard 1-3/4” door thickness
• Standard mounting bolt through oval head machine screws plated to match finish.
• Back to back mounting spanner collars for proper installation with countersunk trim head
machine set screws for maximum anchoring force.
• Packed with fasteners.

Options:
Available in aluminium, brass & stainless steel
Pull handles available on backplate on request.

Note:
Other Non-standard Size Pull handles and Plates available to Order

Finishes:
Simplex Finish US3 US4 US10 US10B US32 US32D
BHMA 605 606 612 613 629 630

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Simplex HARDWARE
Protection Plates

PPHSS
PPSS-H
Meets ANSI/BHMA A156.6
for J407 Pull Plate Meets ANSI/BHMA A156.6 for J301 Push Plate

P
U
S
H

PPSS PPSS-V
Meets ANSI/BHMA A156.6 for
Meets ANSI/BHMA A156.6
J301 Push Plate
for J304 Push Plate

• Designed to use on the push side of the doors square or round corners. Available in sizes:
• Made from the finest architectural aluminum, brass and stainless steel inches mm
• All aluminum, brass and stainless steel push plates meet ANSI A156.6 3 x 12 76 x 305

requirements for .050” thickness. 3 1/2 x 15 89 x 38

4 x 16 102 x 406
• All type of plates supplied with mounting matching screws.
6 x 16 152 x 406
• Available in various thickness 1.0mm, 1.27mm, 1.5mm, 2.0mm, 8 x 16 203 x 406
3.0mm, 4.00mm 8 x 20 203 x 508
• Countersunk holes. 10 x 20 254 x 508

Finishes:
Simplex Finish US3 US4 US10 US10B US32 US32D
BHMA 605 606 612 613 629 630

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8 31
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Simplex HARDWARE
Mortise Deadbolt

Heavy Duty Auxiliary Locks

SPX MDB Series is a heavy duty commercial quality dead bolt that
provides a positive deterrent to forced entry. Designed for maximum
security, the cylinder resists blows attempting to move the lock.

Specifications

Applications - To use as an auxiliary lock for residential

and commercial buildings wherever additional
security is desired.
Door Ranges - 13/8” to 2” door thickness.
Backset - 23/4 standard
Bolt - 1” throw, stainless steel dead bolt, Anti-Saw with
hardened roller pins.
Handing - Non-Handed.
Cylinder - Accepts standard cylinder.
Certifications - Meets or exceeds ANSI A156.5 Grade 1 strength
and operational requirements.

Finishes:
Simplex Finish US3 US4 US9 US10 US10B US26 US26D US32 US32D
BHMA 605 606 611 612 613 625 626 629 630

Small Mortise Deadlocks

SPX MDB 16 E06061 SPX MDB 18 E06081

Deadlock with Double Cylinder Deadlock with Cylinder

- Deadbolt operated from either side by key - Deadbolt operated from outside by key
- Use only on rooms with more than one exit - No inside operation
- Use only on rooms with more than one exit

SPX MDB 17 E06071

SPX MDB 29
Deadlock with Cylinder Thumbturn
- Deadbolt operated from outside by key Exit Lock Door Bolt
- Deadbolt operated from inside by thumb turn - Deadbolt operated from inside by thumb turn lever
- No outside operation

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
*941071-00* EPT2, EPT10,
941071-00
Electric Power Transfer (EPT) & EPT10C Installation Instructions

Tools for Install Read all Warnings Before Starting Installation!

EPT2 EPT10 EPT10C

A
To ensure the maximum amount of
travel in arm for cam lift hinges, install
C
EPT so door side leaf is oriented with
knuckle on top.

B
Frame Leaf

F
D Door Leaf

E
EPT2 Shown

A. Frame Backbox G
B. Metal - #10-24 x 3/8” Flat Phillips Head Machine Screw (4)
Wood - #10 x 3/4” Flat Phillips Head Wood Screw (4)
C. EPT2 - Wire Connectors 12 Gauge Yellow (4)
EPT10 - Wire Connectors 18 Gauge Violet (20)
Note: Door backbox is
EPT10C - Wire Connectors 18 Gauge Violet (20) beveled to match door
D. EPT Assembly
E. Metal - #10-24 x 3/4” Flat Phillips Head Machine Screw (8)
Wood - #10 x 3/4” Flat Phillips Head Wood Screw (8)
F. Door Backbox
G. Strain Relief

© Allegion 2022
Customer Service Printed in U.S.A.
941071-00 Rev. 4/22-g
1-877-671-7011 www.allegion.com/us
 General Information

An electric power transfer (EPT) provides a wiring path from the door to the frame.

These instructions assume that a factory-prepped door and frame are being used. If the door and frame have not
been factory-prepped, see the included dimensioned template.

Before beginning the installation, review “Specifications” and “Warnings”.

Specifications

Applications

EPT can be used for: EPT cannot be used for:

• Door Thickness - 1-3/4” minimum • 1-1/2” offset pivots
Note: The following specifications apply to a • larger than 6” wide butt hinges
1-3/4” thick door. • pocket pivots
• 0 - 180° opening with up to 5” wide butt hinges • swing clear hinges on a door that
• 0 - 180° opening with up to 3/4” offset pivots will open more than 90°
• 0 - 130° opening with 5-1/2” wide butt hinges • center hung door
• 0 - 110° opening with 6” wide butt hinges (center pivot)
• 0 - 90° opening with swing clear hinges • balanced door

Electrical Ratings

EPT2 EPT10 & EPT10C

• Two 18AWG wires • Ten 24AWG wires
• Max. Rating: 24VDC, 5A or • Max Rating: 24VDC, 1A
120VAC NEC Class 3

Read all Warnings Before Starting Installation!

! CAUTION Do not exceed rated specifications (shown above).

! CAUTION EPT must be installed in accordance with these instructions by a qualified electrician.

! CAUTION Wiring must be in accordance with all local codes and regulations.

2
 Installation
1 Use Template from Back Page to Verify Preparation 4 Connect Wires
Refer to wiring information
2 Mount Frame Backbox
in product instructions

A. Remove knockout from top Connectors

B. Install 1/2” conduit, if used
C. Pull 5” of field wiring through knockout

Top Knockout
(1/2”)

Frame Field Wiring

5 Mount EPT Assembly

Keep area under elbows free
of connectors. splices, and
field wiring cable

3 Mount Door Backbox

A. Ensure backbox bevel matches door bevel
B. Remove knockout: - from bottom for metal doors
- from back for wood doors
C. Pull 5” of field wiring through knockout
D. Install strain relief

Door backbox bevel must Do not pinch wires

match bevel on door between backbox and
EPT assembly

Top View
Door

Strain Relief 6 Verify that door opens and closes properly without
binding and that electrical components function
Field Wiring

OR
Elbows must have
Backbox is required for approximately 1/2”
fire wood doors. Rear of free motion when
knockout must be used. pulled straight out
3
4
OF EPT IN FRAME MUST ALIGN
WOOD: WITH OF EPT IN DOOR.
HOLES PREPARED
DURING INSTALL.

3 RECOMMENDED 6" BELOW

METAL:
3 4 " MAX. UPPER HINGE
#10-24 TAPPED WHEN INSTALLED
HOLE (12 PLCS) 7" REINFORCEMENT
8 FROM OUTSIDE .060" (16 GA.)
FACE OF DOOR
MINIMUM
21 "
32

5"
8
FOR FRAME
1" DIA.
3" 1"
8 X 4 DEEP
8

1 " 3 "
9 7
16 4
Template

1"
4

1"
4

5 5"
Note: This drawing is not to scale

8" 8 DIA. THRU TO

FOR DOOR WIRE
11 " CHANNEL
3" 32
1" 8 5"
1 18 5"
4 1
3" 8
MIN. 4

FRAME DOOR METAL WOOD

(OPEN 180 ) DOOR OR FRAME DOOR OR FRAME
(SIDE VIEW) (SIDE VIEW)

*ALL DIMENSIONS ARE TYPICAL

SD-70 RECESSED CONTACTS

.75"(19.05mm) Steel Door Recessed Type

Contact Size: .75"×.84"(19.05mm×21.3mm)

Standard Magnet Size: .75"×.84"(19.05mm×21.3mm)

Standard Gap: 1.1"(28mm)

RoHS Colors: White, Brown

12"(305mm) 22 AWG Leads Standard

C UL
R US LISTED Longer leads available.

Specifications

Gap Loop Reed Max. Contact Max. Initial Contact Max. Switching Max. Switching
Part Number
Inch(mm) Open/Closed Form Rating (W) Resistance (mΩ) Voltage (V) Current (A)

Normally
SD-70 1.1"(28) CLOSED Open 10 100 AC110/DC100 0.5

Normally
SD-71B 1.1"(28) OPEN Closed 3 100 AC30/DC30 0.2

Normally
SD-70 WG 1.26"(32) CLOSED Open 10 100 AC110/DC100 0.5

SD-72C 1.1"(28) SPDT SPDT 3 100 AC30/DC30 0.2

SD-74C .75"(19) DPDT DPDT 3 100 AC30/DC30 0.2

OPERATING TEMPERATURE:-40°C to +60°C

Outline Dimensions Unit: inch(mm)

SD-70/SD-71B
Ø.75″(19.05)
Ø.75″(19.05)

Ø.52″(13.2)
Ø.97″(24.6)
Ø.97″(24.6)
Ø.52″(13.2)

.53″(13.5) .53″(13.5)

.84″(21.3) .84″(21.3)

13
SD-70 RECESSED CONTACTS

Outline Dimensions Unit: inch(mm)

SD-70 WG

Ø.75″(19.05)

Ø.52″(13.2)
Ø.97″(24.6)
.75″ Ø.37″
(19) (9.5)
.53″(13.5)
Bare Rare Earth
.84″(21.3)
(BT 3/8"×3/4")

Ø.75″(19.05)
Ø.75″(19.05)
SD-72C

Ø.52″(13.2)
Ø.97″(24.6)
Ø.97″(24.6)
Ø.52″(13.2)

.53″(13.5) .53″(13.5)

.84″(21.3) .84″(21.3)

SD-74C

Ø.75″(19.05)
Ø.75″(19.05)

Ø.52″(13.2)
Ø.97″(24.6)
Ø.97″(24.6)
Ø.52″(13.2)

.53″(13.5) .53″(13.5)

.84″(21.3) .84″(21.3)

Wiring Diagram
SD-72C SD-74C

COM(White)
COM(White)
NC(Red)
NO(Black)
NC(Red)
COM(White)
NC(Red)
NO(Black)
NO(Black)

14
 Straight sliding system for heavy
wooden doors
STARAL® PLUS durability

D
i on fric
ros tio

See details of the standard EN 1527 p.4 C

ocrorrosion
F

n
c
* Corrosion resistance depends of the components selected 10 6
0 000 cycles
CAPACITY/DOOR 150 KG (TRACK 10300)
200 KG (TRACK 10400)
MANTION ®

400 KG (TRACK 10500)

TRACK ALUMINIUM
MOVEMENT STRAIGHT

TRACKS AND ACCESSORIES

150 KG 200 KG 400 KG Fig. Description
10300/200 - - Raw aluminium track in length of 2 m.
10300/300 - - Ditto. Length: 3 m.
- 10400/400 10500/400 Ditto. Length: 4 m.
1 1 2 3
- 10400/500 10500/500 Ditto. Length: 5 m.
10300/600 10400/600 10500/600 Ditto. Length: 6 m.
- 10400A/600 10500A/600 Anodized aluminium track in length of 6 m.
10033 10043 10053 2 Sliding angle plate for wall-fixing.
- 10043M 10053M 3 Sliding jointing bracket for wall-fixing.
- 10044 10054 4 Sliding bracket for top-fixing.
- 10044M 10054M 5 Sliding jointing bracket for top-fixing. 4 5
- GH10430BP GJ10530BP 6 Set of 4 fastening clips for pelmet.
- GH10430P GJ10530P 7 Raw aluminium pelmet in length of 6 m.
- GH10430EN GJ10530EN 8 Set of end caps for pelmet in black plastic.

FOR DOORS UP TO 150 KG track 10300

Item Nr. Fig. Description
Roller with stainless steel framing and nylon wheels mounted on 6 7 8
9232NC2 10 2
ball bearing top fixing Ø M8. To be used with plates 0036XM8.
0036XM8 11 INOX Screwing plate, top-fixing Ø M8 - 100 x 25 - Thickness: 25/10e 100
Track stop with countersunk tightening screw, for doors weighing
9139-1 14 12
150 Kg

FOR DOORS UP TO 200 KG track 10400

Roller with bracket to be screwed, fitted with 4 nylon wheels
9242NC 9 2
mounted on ball bearing top fixing 9 10
Roller with stainless steel framing and nylon wheels mounted on
9242NC2 10 ball bearing top fixing Ø M10. 2
To be used with plates 0036.
0036 11 Screwing plate, top-fixing Ø M10 - 100 x 25 - Thickness: 25/10e 20
Track stop with countersunk tightening screw, for doors weighing
9149-1 14 8
200 Kg

FOR DOORS UP TO 400 KG track 10500 11

Roller with bracket to be screwed, fitted with 4 nylon wheels
9252NC 9 2
mounted on ball bearing top fixing.
Roller with stainless steel framing and nylon wheels mounted on
9252NC2 10 ball bearing top fixing Ø M12. 2
To be used with plates 0056.
0056 11 Screwing plate, top-fixing Ø M12 - 170 x 30 - Thickness: 40/10e 10
Track stop with countersunk tightening screw, for doors weighing
9159-1 14 2 14 15/16 17
400 Kg

BOTTOM GUIDE
1109/... 15 Galvanized steel U profile 25 x 17 mm - Length: 1.5 / 2 / 3 / 6 m 4
1109A/... 16 Aluminium U profile 25 x 18 mm - Length: 2 / 3 / 6 m 4
1110/... 17 Galvanized steel U profile 30 x 30 mm - Length: 2 / 3 / 6 m 4
1110GDL 18 Nylon guide for U-PROFILE 30 x 30 - 100 x 25 x 25 mm 8
1103RG 19 White plastic adjustable runner (14 to 30 mm) with screw and S6 dowel 10 18 19 20
1102 20 Plate with an olive guide, screwing type. For U-Profile 1109A. 20

30 See other guides p.55

 Simplex HARDWARE
Flush Pulls

SPX 9006T
Flush Pull Handle
With Thumb Turn

-Size: 2-1/4" x 9"

-Finish: US32D - Satin Stainless Steel
-with Exposed screws (FE)
-Available in multiple finishes.
-Made in USA.

Meets ANSI A117.1

SPX 9006E
Flush Pulls

-Size: 1-5/8" x 9"

-Finish: US32D - Satin Stainless Steel
-with Exposed screws (FE)
-Available in multiple finishes.
-Made in USA.

Meets ANSI A117.1

SIMPLEX Hardware, Inc. 666 Thornwood Ave., Burlington, Ontario Canada, L7N 3B8
Toll Free 1-888-999-9535 www.simplexhardware.com • Email: [email protected]
 Builders Hardware Manufacturers Association
355 Lexington Avenue, 15th Floor
New York, NY 10017
https://buildershardware.com

BHMA Certificate of Compliance

This confirms that the products listed are certified in accordance with the
ANSI/BHMA Standard(s) indicated for the date shown below.

Date printed: 7/28/2022

BHMA Listing Company

Simplex Hardware
8 Fair Valley
Coto De Caza, California 92678
United States
simplexhardware.net

Applicable ANSI/BHMA Standard(s):

A156.3 Exit Devices

These products are included in the BHMA Certification Program. Only products listed
in the BHMA Online Certified Product Directory are allowed to display the BHMA
Certified Mark and assert compliance with this Program. This Certificate of
Compliance is accurate and valid as of the date of printing.
Please see website for latest information:
https://buildershardware.com/Certification-Program/Certified-Products-
Directory
 A156.3 Exit Devices

Rim Exit Device

Trim Trim Brand
Function Function Standard Meets Brand Brand Function Brand
Type Number Description Grade Suffix Year A156.41 Model Series Number Description
Type 01 Exit only, no Grade 2014 N SPX- SPX- SPX- Wide stile
1 trim or blank 1 6810 6800 6810F fire-rated
escutcheon rim exit
device with
grooved
device body

Type 01 Exit only, no Grade 2014 N SPX- SPX- SPX- Wide stile
1 trim or blank 1 6610 6600 6610F fire-rated
escutcheon rim exit
device with
smooth
device body

Type 02 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 trim when 1 6610 6600 6610F fire-rated
actuating rim exit
bar is device with
locked down smooth
device body

Type 02 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 trim when 1 6810 6800 6810F fire-rated
actuating rim exit
bar is device with
locked down grooved
device body

Type 08 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 knob or 1 6810 6800 6810F fire-rated
lever. Key rim exit
locks or device with
unlocks grooved
knob or device body
lever

Type 08 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 knob or 1 6610 6600 6610F fire-rated
lever. Key rim exit
locks or device with
unlocks smooth
knob or device body
lever

Downloaded from the BHMA Certified Product Directory 7/28/2022

Page 2 of 21
 A156.3 Exit Devices

Trim Trim Brand

Function Function Standard Meets Brand Brand Function Brand
Type Number Description Grade Suffix Year A156.41 Model Series Number Description

Type 14 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 trim when 1 6810 6800 6810F fire-rated
latch is rim exit
released by device with
knob, lever,. grooved
Always device body
active, no
cylinder

Type 14 Entrance by Grade 2014 N SPX- SPX- SPX- Wide stile

1 trim when 1 6610 6600 6610F fire-rated
latch is rim exit
released by device with
knob, lever,. smooth
Always device body
active, no
cylinder

Surface Vertical Rod Exit Device

Trim Trim Brand
Function Function Standard Meets Brand Brand Function Brand
Type Number Description Grade Suffix Year A156.41 Model Series Number Description

Type 2 01 Exit only, no Grade 2020 N SPX- SPX- SPX- Wide stile
trim or blank 1 6830- 6800 6830F- fire-rated
escutcheon LBR LBR surface
Vertical Rod
exit device
Less Bottom
Rod with
grooved
device body

Type 2 01 Exit only, no Grade 2020 N SPX- SPX- SPX- Wide stile
trim or blank 1 6630 6600 6630F fire-rated
escutcheon surface
Vertical Rod
exit device
with smooth
device body

Type 2 01 Exit only, no Grade 2020 N SPX- SPX- SPX- Wide stile
trim or blank 1 6630- 6600 6630F- fire-rated
escutcheon LBR LBR surface
Vertical Rod
exit device
Less Bottom
Rod with
smooth
device body

Downloaded from the BHMA Certified Product Directory 7/28/2022

Page 3 of 21
 CERTIFICATE OF COMPLIANCE
Certificate Number 20220114-R38166
Report Reference R39848-20190723-20210128
Issue Date 2022-January-14

Issued to: ATHMER OHG

Sophienhammer
Arnsberg-Mueschede, 59757 Germany

This certificate confirms that Gasketing and Edge-sealing Materials for Fire Doors, Positive-
representative samples of pressure Tested

BS 5114 S, BS 3813 S, RG 7040, AT 15006,

AT 12706, AT 12713, AT 15213, BS 3515 S, PS 744 S,
PS 1107 S, PS 1310 S, BR 3506, AS 2519 V,
AT 12713 V, BS 4606 N, PS 2407 S, PS 2906 S,
PS 2706 S, PS 3106 S, BS 4006 V, PS 788 S

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 10C, "Positive Pressure Fire Tests of Door Assemblies."
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1
2/2/2017 GXSR.R26589 ­ Flush and Surface Bolts, Manual Type

GXSR.R26589
Flush and Surface Bolts, Manual Type

Page Bottom

Flush and Surface Bolts, Manual Type

See General Information for Flush and Surface Bolts, Manual Type

SIMPLEX HARDWARE INC R26589

666 THORNWOOD AVE
BURLINGTON, ON L7N 3B8 CANADA

Manual flush bolts, Model SPX­100, with 5/8 in. throw for use on swinging metal fire doors measuring up to 4 ft. wide and 8 ft. high with 1­
3/4 in. thickness and rated up to and including 3 hr.

Manual flush bolts, Model SPX­101, with 5/8 in. throw for use on swinging type, wood composite fire doors measuring up to 4 ft. wide and 8
ft. high with 1­3/4 in. thickness and rated up to and including 1­1/2 hr.

Last Updated on 2015­01­05

Questions? Print this page Terms of Use Page Top

© 2017 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2017 UL LLC".

http://database.ul.com/cgi­bin/XYV/template/LISEXT/1FRAME/showpage.html?name=GXSR.R26589&ccnshorttitle=Flush+and+Surface+Bolts,+Manual+… 1/1
2/2/2017 GWZQ.R38336 ­ Door Hinges

GWZQ.R38336
Door Hinges

Page Bottom

Door Hinges

See General Information for Door Hinges

SIMPLEX HARDWARE GMBH R38336

Albert­Einstein­Strasse
42 a, D
63322 Roedermark, GERMANY

Stainless steel ball bearing type hinges for use on swinging type fire doors rated up to and including 3 hours.

Models: SPX2BB5191­4.0"x3.0"x3.0mm, SPX2BB5191­4.0"x3.5"x3.0mm, SPX2BB5191­4.0"x4.0"x3.0mm, SPX2BB5191­4.5"x4.0"x3.0mm,

SPX2BB5191­4.5"x4.0"x3.4mm, SPX2BB5191­4.5"x4.5"x3.0mm, SPX2BB5191­4.5"x4.5"x3.4mm, SPX4BB5199­4.5"x4.0"x4.6mm,
SPX4BB5199­4.5"x4.5"x4.6mm, SPX3CB-4"x4", SPX3CB-4.5"x4", SPX3CB-5"x4" Hinges.

Last Updated on 2015­06­01

Questions? Print this page Terms of Use Page Top

© 2017 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2017 UL LLC".

http://database.ul.com/cgi­bin/XYV/template/LISEXT/1FRAME/showpage.html?name=GWZQ.R38336&ccnshorttitle=Door+Hinges&objid=1084709378&cf… 1/1
2/2/2017 GYJT.R26566 ­ Single­point Locks and Latches

GYJT.R26566
Single­point Locks and Latches

Page Bottom

Single­point Locks and Latches

See General Information for Single­point Locks and Latches

SIMPLEX HARDWARE INC R26566

666 THORNWOOD AVE
BURLINGTON, ON L7N 3B8 CANADA

Mortise type, SPX­A Series with a 3/4 in. latch bolt, for use with swinging type fire doors.

Also evaluated in accordance with Standard UL 10C.

Cylindrical type, Series SPXCK with 9/16 in. or 3/4 in. latch bolt. May be used with brass, bronze or stainless­steel lever handles.

Tubular type, Model SPX 6610 with 1/2 in. latch bolt, for use on swinging type fire doors rated up to and including 3 hr, not exceeding 4 feet in
width and 8 ft in height.

Last Updated on 2015­06­26

Questions? Print this page Terms of Use Page Top

© 2017 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2017 UL LLC".

http://database.ul.com/cgi­bin/XYV/template/LISEXT/1FRAME/showpage.html?name=GYJT.R26566&ccnshorttitle=Single­point+Locks+and+Latches&obji… 1/1
2/2/2017 GXHX.R27082 ­ Fire­exit Hardware

GXHX.R27082
Fire­exit Hardware

Page Bottom

Fire­exit Hardware

See General Information for Fire­exit Hardware

SIMPLEX HARDWARE INC R27082

666 THORNWOOD AVE
BURLINGTON, ON L7N 3B8 CANADA

Models SPX­6810F, SPX­6610F single point rim type latch.

Models SPX­6810F, SPX­6610F with Series 6000 mullions.

Models SPX­6830F, SPX­6630F surface mounted vertical rod devices for use on doors not exceeding 10 ft. in height.

Models SPX­6830F, SPX­6630F with Auxiliary Fire Latch for LBR Devices.

Models SPX­6820F, SPX­6620F single point mortise lock device.

Models SPX­6850F, SPX­6650F concealed vertical rod devices for use on doors not exceeding 10 ft. in height.

Models SPX­6850F, SPX­6650F with Auxiliary Fire Latch for LBR Devices.

Models SPX­6510F, SPX­6710F single point rim type latch.

Models SPX­6530F and SPX­6730F surface mounted vertical rod device.

Models SPX­6550F and SPX­6750F concealed vertical rod device.

Last Updated on 2012­03­05

Questions? Print this page Terms of Use Page Top

© 2017 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2017 UL LLC".

http://database.ul.com/cgi­bin/XYV/template/LISEXT/1FRAME/showpage.html?name=GXHX.R27082&ccnshorttitle=Fire­exit+Hardware&objid=10815740… 1/1
2/2/2017 GVEV.R26573 ­ Swinging Fire Door Closers

GVEV.R26573
Swinging Fire Door Closers

Page Bottom

Swinging Fire Door Closers

See General Information for Swinging Fire Door Closers

SIMPLEX HARDWARE INC R26573

666 THORNWOOD AVE
BURLINGTON, ON L7N 3B8 CANADA

For self closing doors, without hold­open feature, surface mounted type, size 2­6 Model(s) SPX­8300

For self­closing doors, surface mounted regular or parallel type, without hold­open feature Model(s) SPX­6200, SPX­6300, SPX­6400,
SPX­6500, SPX­7200, SPX­7300, SPX­7400, SPX­7500, SPX­8000, SPX­8000BC, SPX­8000BC BF

Swinging door closers for self­closing doors, adjustable, without hold­open feature, concealed type Model(s) SPX­DC3000

Investigated to Standard UL 10C.

For self closing doors, without hold­open feature, surface mounted type, size 2­6 Model(s) SPX­8400

Last Updated on 2016­08­02

Questions? Print this page Terms of Use Page Top

© 2017 UL LLC

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2017 UL LLC".

http://database.ul.com/cgi­bin/XYV/template/LISEXT/1FRAME/showpage.html?name=GVEV.R26573&ccnshorttitle=Swinging+Fire+Door+Closers&objid… 1/1
 Builders Hardware Manufacturers Association
355 Lexington Avenue, 15th Floor
New York, NY 10017
https://buildershardware.com

BHMA Certificate of Compliance

This confirms that the products listed are certified in accordance with the
ANSI/BHMA Standard(s) indicated for the date shown below.

Date printed: 12/25/2023

BHMA Listing Company

Simplex Hardware
8 Fair Valley
Coto De Caza, CA 92678
US
simplexhardware.net

Applicable ANSI/BHMA Standard(s):

A156.4 Door Controls-Closers

These products are included in the BHMA Certification Program. Only products listed
in the BHMA Online Certified Product Directory are allowed to display the BHMA
Certified Mark and assert compliance with this Program. This Certificate of
Compliance is accurate and valid as of the date of printing.
Please see website for latest information:
https://buildershardware.com/Certification-Program/Certified-Products-
Directory
 A156.4 Door Controls-Closers

Floor concealed closers

Product Brand
ANSI Function Standard Option Brand Brand Function Brand
Number Description Grade Year Type Model Series Number Description
C06011 Center Grade 1 2019 PT8A, SFS36490 SFS - Floor
pivoted - PT8B, conceled
double acting PT8M closers

Surface closers, modern type with cover

Product Brand
ANSI Function Standard Option Brand Brand Function Brand
Number Description Grade Year Type Model Series Number Description
C02011 Regular Grade 1 2019 PT4D, SPX8300 SPX8300 - DOOR
Mounting PT4E, CLOSER
PT4H with
Backcheck.

C02011 Regular Grade 1 2019 PT4D, SPX8400DA SPX8400 - DOOR

Mounting PT4F, CLOSER
PT4H With
Backcheck
and Delay
Action

C02011 Regular Grade 1 2019 PT4D, SPX8300DA SPX8300 - DOOR

Mounting PT4E, CLOSER
PT4F, With
PT4H Backcheck
and Delay
Action

C02011 Regular Grade 1 2019 PT4D, SPX8400 SPX8400 - DOOR

Mounting PT4H CLOSER
with
Backcheck

C02021 Parallel arm Grade 1 2019 PT4D, SPX8400 SPX8400 - DOOR

mounting PT4H CLOSER
With
Backcheck

C02021 Parallel arm Grade 1 2019 PT4D, SPX8400DA SPX8400 - DOOR

mounting PT4F, CLOSER
PT4H With
Backcheck
and Delay
Action

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 2 of 3
 A156.4 Door Controls-Closers

Product Brand
ANSI Function Standard Option Brand Brand Function Brand
Number Description Grade Year Type Model Series Number Description

C02021 Parallel arm Grade 1 2019 PT4D, SPX8300DA SPX8300 - DOOR

mounting PT4E, CLOSER
PT4F, With
PT4H Backcheck
and Delay
Action

C02021 Parallel arm Grade 1 2019 PT4D, SPX8300 SPX8300 - DOOR

mounting PT4E, CLOSER
PT4H with
Backcheck.

C02041 Top jamb Grade 1 2019 PT4D, SPX8400 SPX8400 - DOOR

mounting PT4H CLOSER
with
Backcheck

C02041 Top jamb Grade 1 2019 PT4D, SPX8300DA SPX8300 - DOOR

mounting PT4F, CLOSER
PT4H With
Backcheck
and Delay
Action

C02041 Top jamb Grade 1 2019 PT4D, SPX8400DA SPX8400 - DOOR

mounting PT4F, CLOSER
PT4H With
Backcheck
and Delay
Action

C02041 Top jamb Grade 1 2019 PT4D, SPX8300 SPX8300 - DOOR

mounting PT4E, CLOSER
PT4H with
Backcheck.

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 3 of 3
 Builders Hardware Manufacturers Association
355 Lexington Avenue, 15th Floor
New York, NY 10017
https://buildershardware.com

BHMA Certificate of Compliance

This confirms that the products listed are certified in accordance with the
ANSI/BHMA Standard(s) indicated for the date shown below.

Date printed: 12/25/2023

BHMA Listing Company

Simplex Hardware
8 Fair Valley
Coto De Caza, CA 92678
US
simplexhardware.net

Applicable ANSI/BHMA Standard(s):

A156.13 Mortise Locks

These products are included in the BHMA Certification Program. Only products listed
in the BHMA Online Certified Product Directory are allowed to display the BHMA
Certified Mark and assert compliance with this Program. This Certificate of
Compliance is accurate and valid as of the date of printing.
Please see website for latest information:
https://buildershardware.com/Certification-Program/Certified-Products-
Directory
 A156.13 Mortise Locks

Apartment Corridor Door Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F20 Grade 1 Grade 1 2022 N SPX- SPX-AS F20 Apartment
AS20 Corridor Door
Lock

F20 Grade 1 Grade 1 2017 N SPX- SPX-AAS F20 Apartment

AAS20 Corridor Door
Lock

F20 Grade 1 Grade 1 2022 N SPX- SPX-AS F21 Dormitory with

AS21 Dead bolt

Apartment or Store Door Handle Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F24 Grade 1 Grade 1 2022 N SPX-AS24 SPX-AS F24 Apartment

or Store
Door Handle
Lock

Apartment, Exit or Public Toilet Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F09 Grade 1 Grade 1 2017 N SPX- SPX-AAS F09 Apartment,

AAS09 Public Toilet
Lock

F09 Grade 1 Grade 1 2022 N SPX- SPX-AS F09 Apartment/Exit

AS09 or Public Toilet

Asylum or Institutional Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F30 Grade 1 Grade 1 2017 N SPX- SPX-AAS F30 Asylum or

AAS30 Institutional
Lock

Classroom Dead Lock

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 2 of 6
 A156.13 Mortise Locks

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F29 Grade 1 Grade 1 2017 N SPX- SPX-AAS F29 Classroom

AAS29 Dead Lock

Classroom Lock
Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F05 Grade 1 Grade 1 2022 N SPX- SPX-AS F32 Intruder Latch

AS32 bolt Lock

F05 Grade 1 Grade 1 2017 N SPX- SPX-AAS F05 Classroom

AAS05 Lock

F05 Grade 1 Grade 1 2022 N SPX- SPX-AS F05 Classroom

AS05 lock

Dead Lock
Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F16 Grade 1 Grade 1 2017 N SPX- SPX-AAS F16 Dead Lock with
AAS16 Double
Cylinder

F16 Grade 1 Grade 1 2022 N SPX- SPX-AS F16 Dead lock

AS16

F17 Grade 1 Grade 1 2017 N SPX- SPX-AAS F17 Dead Lock with
AAS17 Cylinder and
Thumbturn

F17 Grade 1 Grade 1 2022 N SPX- SPX-AS F17 Dead lock

AS17

Dead Lock
Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F18 Grade 1 Grade 1 2017 N SPX- SPX-AAS F18 Dead Lock with
AAS18 Single Cylinder

F18 Grade 1 Grade 1 2022 N SPX- SPX-AS F18 Dead lock

AS18

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 3 of 6
 A156.13 Mortise Locks

Dormitory or Exit Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F11 Grade 1 Grade 1 2017 N SPX- SPX-AAS F11 Dormitory or

AAS11 Exit Lock

F13 Grade 1 Grade 1 2022 N SPX- SPX-AS F13 Dormitory or

AS13 Exit

F13 Grade 1 Grade 1 2017 N SPX- SPX-AAS F13 Dormitory or

AAS13 Exit Lock

Entry Lock
Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F04 Grade 1 Grade 1 2017 N SPX- SPX-AAS F04 Entry Lock

AAS04

F04 Grade 1 Grade 1 2022 N SPX- SPX-AS F04 Entry lock

AS04

F04 Grade 1 Grade 1 2022 N SPX- SPX-AS F30 Asylum or

AS30 Institutional
Lock

Hotel Guest Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F15 Grade 1 Grade 1 2022 N SPX- SPX-AS F15 Hotel or Motel

AS15

F15 Grade 1 Grade 1 2017 N SPX- SPX-AAS F15 Hotel Guest

AAS15 Room Lock

Intruder Latch Bolt Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F32 Grade 1 Grade 1 2017 N SPX- SPX-AAS F32 Intruder

AAS32 Latchbolt Lock

F33 Grade 1 Grade 1 2017 N SPX- SPX-AAS F33 Intruder

AAS33 Deadbolt

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 4 of 6
 A156.13 Mortise Locks

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F34 Grade 1 Grade 1 2017 N SPX- SPX-AAS F34 Intruder
AAS34 Deadbolt Lock

No ANSI Designation for Function

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
N/A Grade 1 Grade 1 2022 N SPX-AS42 SPX-AS F42 Dummy
lever

Passage or Closet Latch

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F01 Grade 1 Grade 1 2017 N SPX- SPX-AAS F01 Passage or

AAS01 Closet Latch

F01 Grade 1 Grade 1 2022 N SPX- SPX-AS F31 Exit or

AS31 Communicating
Lock

F01 Grade 1 Grade 1 2022 N SPX- SPX-AS F01 Passage lock

AS01

Privacy, Bedroom or Bath Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F02 Grade 1 Grade 1 2022 N SPX- SPX-AS F19 Privacy or
AS19 Bathroom

F02 Grade 1 Grade 1 2017 N SPX- SPX-AAS F02 Privacy,

AAS02 Bedroom or
Bath Lock

F22 Grade 1 Grade 1 2017 N SPX- SPX-AAS F22 Privacy,

AAS22 Bedroom or
Bath Lock

Privacy, Bedroom or Bath Lock

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 5 of 6
 A156.13 Mortise Locks

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F19 Grade 1 Grade 1 2017 N SPX- SPX-AAS F19 Privacy,
AAS19 Bedroom or
Bath Lock

Room Door Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description
F21 Grade 1 Grade 1 2017 N SPX- SPX-AAS F21 Room Door
AAS21 Lock

Store Door Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F14 Grade 1 Grade 1 2022 N SPX- SPX-AS F14 Storeroom

AS14

F14 Grade 1 Grade 1 2017 N SPX- SPX-AAS F14 Store Door

AAS14 Lock

Storeroom or Closet Lock

Brand
Function Operational Security Standard Meets Brand Brand Function Brand
Number Grade Grade Year A156.41 Model Series Number Description

F07 Grade 1 Grade 1 2022 N SPX- SPX-AS F22 Privacy,

AS22 Bedroom or
Bath Lock

F07 Grade 1 Grade 1 2017 N SPX- SPX-AAS F07 Storeroom or

AAS07 Closet Lock

F07 Grade 1 Grade 1 2022 N SPX- SPX-AS F07 Storeroom or

AS07 Closet

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 6 of 6
 Builders Hardware Manufacturers Association
355 Lexington Avenue, 15th Floor
New York, NY 10017
https://buildershardware.com

BHMA Certificate of Compliance

This confirms that the products listed are certified in accordance with the
ANSI/BHMA Standard(s) indicated for the date shown below.

Date printed: 12/25/2023

BHMA Listing Company

Simplex Hardware
8 Fair Valley
Coto De Caza, CA 92678
US
simplexhardware.net

Applicable ANSI/BHMA Standard(s):

A156.36 Auxiliary Locks

These products are included in the BHMA Certification Program. Only products listed
in the BHMA Online Certified Product Directory are allowed to display the BHMA
Certified Mark and assert compliance with this Program. This Certificate of
Compliance is accurate and valid as of the date of printing.
Please see website for latest information:
https://buildershardware.com/Certification-Program/Certified-Products-
Directory
 A156.36 Auxiliary Locks

Bored auxiliary dead locks and latches

Brand
ANSI Standard Meets Brand Brand Function Brand
Number Grade Material Year A156.41 Model Series Number Description
E0151 Grade 1 Optional 2016 N DB-61-IC DB E0152 Dead
Material Lock/Key
From Outside
& Turn From
Inside

E0151 Grade 1 Optional 2016 N DB-61 DB E0151 Dead

Material Lock/Key
From Outside
& Turn From
Inside

E0151 Grade 1 Optional 2016 N DB-71 DB E0161 Dead

Material Lock/Key One
Side &
Mounting Plate
Other Side

E0151 Grade 1 Optional 2016 N DB-71-IC DB E0162 Dead

Material Lock/Key One
Side &
Mounting Plate
Other Side

E0151 Grade 1 Optional 2016 N DB-91-IC DB E0172 Dead

Material Lock/Key Out
Side Turn
Retract Bolt
But Does Not
Project it

E0151 Grade 1 Optional 2016 N DB-81-IC DB E0142 Dead

Material Lock/Key
From Either
Side

E0151 Grade 1 Optional 2016 N DB-81 DB E0141 Dead

Material Lock/Key
From Either
Side

E0151 Grade 1 Optional 2016 N DB-91 DB E0171 Dead

Material Lock/Key Out
Side Turn
Retract Bolt
But Does Not
Project it

Mortise or Rim dead locks and latches

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 2 of 3
 A156.36 Auxiliary Locks

Brand
ANSI Standard Meets Brand Brand Function Brand
Number Grade Material Year A156.41 Model Series Number Description

E06071 Grade 1 Optional 2016 N SPX MDB E06071 Single Cylinder

Material MDB17 Outside /TT Inside

E06071 Grade 1 Optional 2016 N SPX MDB E06081 Single Cylinder

Material MDB18 From Outside
/Inside Blank

E06071 Grade 1 Optional 2016 N SPX MDB - Thumb Turn

Material MDB29 Inside/No Outside
Operation

E06071 Grade 1 Optional 2016 N SPX MDB E06061 Both Side Cylinder
Material MDB16

Downloaded from the BHMA Certified Product Directory 12/25/2023

Page 3 of 3