Scribd
Upload
5 views

_GT800 command（V1.0)

The document provides a comprehensive list of commands for the GT800 device, categorized into QUERY and SETTING classes. It includes functions for checking firmware, parameters, network settings, and various device statuses, as well as commands for setting configurations like APN, server parameters, alarms, and GPS settings. Additionally, it outlines specific command formats and parameters for executing these functions.

Uploaded by

dolphins.sharjeel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
5 views

_GT800 command（V1.0)

The document provides a comprehensive list of commands for the GT800 device, categorized into QUERY and SETTING classes. It includes functions for checking firmware, parameters, network settings, and various device statuses, as well as commands for setting configurations like APN, server parameters, alarms, and GPS settings. Additionally, it outlines specific command formats and parameters for executing these functions.

Uploaded by

dolphins.sharjeel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 15

GT800 COMMANDS LIST

No. Function
QUERY CLASS
1 Check firmware version
2 Check parameters
3 Query device network setting
4 Check status
5 Check position status
6 Check URL
7 Check position
8 Check geo fence status
9 Check moving status
SETTING CLASS

1 Set APN

2 Set automatic APN

3 Set server parameters

4 Set GMT parameter

5 Restore to factory
6 Edit URL

7 GPRS switch

8 Reboot
9 GPRS blocking alarm

10 SOS setting
11 Center phone number setting

12 Heartbeat interval setting

13 Set GPS data sending interval

14 Set distance interval of GPS data sending

15 Set the angle upload

16 Fill the ACC status changes

17 Set the GPS data sending batch

18 Set the delay of the defense

19 Set vibration sensor detecting time


20 Set the GPS controlled time by sensor

21 Disarm
22 Clear the backup data
23 Set the static data filtering

24 Set the petrol/electricity control

25 Set delay time of voice monitor


26 Set the fence alarm

27 Set the vibration alarm

28 Set the power cut-off alarm

29 Set the low battery alarm

30 Set the SOS alarm

31 Set the dialing times

32 Set the moving alarm


33 Set the overspeed alarm

34 Set sensitivity of SENSOR


35 Set the LED sleep mode

37 Set the instruction password

38 Revise the instruction password

40 Set the SMS forwarding


41 Turn on the function of query location by phone

42 Mileage statistics
46
Car door negatively/positively trigger detection setting
48 Car door alarm setting
50 Trigger light & Horn to find car
Analog quantity upload setting(external voltage upload setting)
52 Query LBS location
54 activate GPS command

56 blind alarm
58
Low external power alarm
60
62
ACC status change alarm
Command

VERSION#
PARAM#
GPRSSET#
STATUS#
WHERE#
URL#
POSITION
OR
123
FENCE#
MOVING#

APN, [apnname]#
OR
APN, [apnname],[user],[pwd]#

APN#
ASETAPN, [X]#
ASETAPN#

SERVER,mode,domainName/IP,port,protocol#

SERVER#
GMT,[A],[b],[C]#
GMT#
FACTORY#
EURL,network links#
EURL#
GPRSON,X#
GPRSON#
RESET#
GPRSALM,X#
GPRSALM#
SOS,A,[phone number 1][,phone number 2][,phone number 3]#
SOS,D,[sequence number 1][, sequence number 2][,sequence number 3]#
SOS,[D],[phone number]#
SOS#
CENTER, A,[phone number]#
CENTER, D#
CENTER#
HBT,[T1],[T2]#
HBT#
TIMER,[T1],[T2]#
TIMER#
DISTANCE,[D]#
DISTANCE#
ANGLEREP,[X][,A][,B]#
ANGLEREP,OFF#
ANGLEREP#
ACCREP,[A]#
ACCREP#
BATCH,[A][,N]#
BATCH#
DEFENSE,[A]#
DEFENSE#
SENSOR,<A>,[,B][,C]#
SENDS,[A]#
SENDS#
DSRESET#
CLEAR#
SF,[A][,B]#
SF#
RELAY,[A]#
RELAY#
DELAY,<A>#
FENCE,[B],0,[D],[E],[F],[X],[M]#
FENCE,[B],1,[D],[E],[F],[G][,X][,M]#
FENCE#
SENALM,[A][,M]#
SENALM,OFF#
SENALM#
POWERALM, [A][,M][,T1][,T2][,T3]#
POWERALM, OFF#
POWERALM#
BATALM, [A][, M]#
BATALM,OFF#
BATALM#
SOSALM,[A],[M]#
SOSALM,OFF#
SOSALM#
CALL,N#
CALL#
MOVING,[A][,R][,M]#
MOVING,OFF#
MOVING#
SPEED,[A][,B][,C][,M]#
SPEED#
LEVEL,<A>#
LEDSLEEP,[A]#
LEDSLEEP#
PWDSW,[A]#
PWDSW,[password],[B]#
PASSWORD,[A],[B]#

FW,[A],[B]#
TQL,[A]#
TQL#
MILEAGE,[A],[B],[K]#
MILEAGE#
DOOR,[X]#
DOORALM,A[,B]#
FIND#
ADT,[A][,B]#
LBS#
GPSON,[T]#
GPSON#
BLINDALM,<A>[,B][,C,][M]#
BLINDALM#
EXBATALM,<A>,[M],[N1],[N2],[T]#
EXBATALM,OFF#
EXBATALM#
ACCALM,[M],[A],[B]#
Reply

Project Version: SC7701_BAR,GT06E_40_S1G15M4_B3_R0_V30_WM,Build


IMEI:868120103643695;Timer:10,10;HBT:3,5;SOS:,,;Center Number:;Sensorset:10,1,5,1;Sends:5
GPRS:ON,APN:3gnet,1;Server:1,WWW.COOACCESS.NET(112.90.87.86),8841,0;AGPS:www.jimiagps.co
Battery:4.18V; GPRS:Online; GSM Signal Level:22;ACC:OFF,GPS:Successful positioning,SVS Used in fix:9(12), GPS
Current position! Lat:N22.57776,Lon:E113.91667,Course:334,Speed:0Km/h,Date
e.g.<01-08
17:36>http://maps.google.com/maps?q=N22.577156,E113.9
GPS located: <01-08
17:36>http://maps.google.com/maps?q=N22.577156,E113.9
Fence Alarm,Circle,ON,In and Out,Radius:1000 M,22.57726,113.91676,
TrackerCmdMoving--s_lon:0.00000,s_lat:0.00000
Moving Alarm OFF,SMS:ON,GPRS:ON,TEL:OFF,Radius:300 M,0.00
p

A：E or W；"E" m

set the network link

X=0 o

The

Dele
T1 ranges 1~19(m
T2 ranges 1~19 (mi
T1 ranges 5~18000 or 0
T2 ranges 5

D range

A=5～1

A= A=O
N=1～50,

A= 1～

C=1-3
A=0-300(minute), time duration fo

B=1

A=

A=0、5-18 seco

E=th
F=

M=0/1/2, way of alarming

M=0/1/2, way of alarming, 0

M=0/1/2

M=0/1/2, way of alarming, 0

A=ON/OFF, de
M=0～2, 0: GPRS o

Ch
B

ON: sta

Numbers and letters mix inputs supporte


A=old password, numbers and letters
B=new password, numbers a

B=SMS content, content to fo


A=ON/OFF,Turn

B=0～999999，
K=1000～1200, K value for the p

B=0～2，0:

B=

M=

B=
HEX

56455253494f4e23
504152414d23
4750525353455420
53544154555323
574845524523
55524c23

4d4f56494e4723

You might also like