ATOMIC STRUCTURE

INTRODUCTION
The existence of atoms has been propsed by ancient Indian and Greek philosophers (400 B.C.) who believed that all
matter consisted of very small indivisible particles called atoms. According to them, atoms were the fundamental
building blocks of matter. The continued subdivision of matter would yield atoms, which could not be further
subdivided. This means that atom is the fundamental unit of matter. So these ideas remained dominant for a very
long time and were reviewed again by scientists in 19th century.
In 1808, an English scientist John Dalton formulated a precise definition of the indivisble blocks of matter i.e. atoms.
His theory, called Dalton’s atomic theory, regarded atom as the ultimate particle of matter. The postulates are as
follows :
(a) Every matter is composed of very minute particles called as atoms which take part in chemicals reactions.
(b) Atoms can not be further subdivided.
(c) The atoms of different elements differ from each other in their properties and masses. while atoms of same
elements are identical in all aspects.
(d) The atoms of different elements can combine in simple ratios to form compounds. The massed combined
elements represents the masses of combined atoms.
(e) Atoms can neither be created nor be destroyed.

Although Dalton was pretty much successful in explaining the law of conservation of mass, law of constant
proportion, law of multiple proportion, however he failed to explain many properties as well. The drawbacks are as
follows :
(a) It failed to explain the internal structure of atoms and assumed atoms do not have any structure.
(b) It could not explain how atoms of different elements differ from one another.
(c) It could not explain how atoms of different elements combine with one other.

ATTEMPTS FOR DISCOVERING FUNDAMENTAL PARTICLES OF MATTER / ATOMS

Earlier Efforts to Reveal Structure of Atom
CATHODE RAYS (Discovery of e-)

Gas at low pressure (10-4 atm)

V > 10,000 volts

- +
Cathode Anode

 (Invisible rays)
vaccum pump (Cathode rays)

In 1859, Julius plucker started the study of conduction of electricity through gases at low pressure in a discharge
tube. When a high voltage of the order 10, 000 volts or more was applied across the electrodes, some sort of
invisible rays moved from the –ve electrode to the +ve electrode. Since the –ve electrode is referred to as cathode,
these rays were called cathode rays.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 99
CHEMISTRY FOR JEE MAIN & ADVANCED

 Properties of Cathode Rays

(1) They travel in straight lines away from cathode with very high velocity (about one - tenth of velocity of light).
(2) A shadow of metallic object placed in the path is cast on the wall opposite to the cathode.

Production of a shadow of the solid object by cathode rays

(3) They produce a green glow when strick the glass wall matter. Light is emitted when they strike the zinc-
sulphide screen.
(4) When a small pin wheel is placed in their path, the blades of the wheel are set in motion. Thus the cathode
rays consist of material particles which have mass and velocity.

Rotation of light paddle wheel by cathode rays

(5) They are deflected by the electric and magnetic fields. When the rays are passed between two electrically
charged plates, these are deflected towards the positively charged plate. It shows that cathode rays
carry -ve charge. These particles carrying negative charge were called negatrons by Thomson.
The name negatron was changed to 'electron' by Stoney

Deflection of cathode rays towards positive plate of the electric field

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 100
 ATOMIC STRUCTURE

(6) They produce heat energy when they collide with the matter. It shows that cathode rays posses
Kinetic energy which is converted into heat energy when stopped by matter.
(7) These rays affect the photographic plate.
(8) Cathode rays can penetrate the thin foil of solid materials.
(9) Cathode rays can ionize the gases through which they pass.
(10) The nature of cathode rays is independent of
(a) The nature of cathode and
(b) The gas in discharge tube.
MEASUREMENT OF E/M FOR ELECTRON
In 1897, J.J. Thomson determined the e/m value (charge/mass) of the electron by studying the deflection of cathode
rays in electric & magnetic fields.
The value of e/m has been found to be –1.7588 108 coulomb/g.
 By performing a series of experiments, Thomson proved that whatever gas be taken in the discharge tube
and whatever be the material of the electrodes the value of e/m is always the same.
 Electrons are thus common universal constituents of all atoms.
DETERMINATION OF THE CHARGE ONAN ELECTRON Spray gun
Oil drops
The absolute value of the charge on an e- was (atomizer)
measured by R.A. Milikan in 1909 by the Milikan's
oil drop experiment.
 The apparatus used by him is shown in fig.
+++ +++
 An oil droplet falls through a hole in the upper X-rays
plate. The air between the plates is then exposed
to X-rays which eject electrons from air ------
molecules. Some of these e- are captured by
telescope to
the oil droplet and it acquires a negative charge. Chargable observe speed of
plates oil drops
The metal plates were given an electric charge, and as the electric field between the plates was increased, it
was possible to make some of the drops travel upwards at the same speed as they were previously falling.
By measuring the speed, and knowing things like the strength of the field and the density of the oil, radius of oil drops,
Milikan was able to calculate the magnitude of the charge on the oil drops. He found that the smallest charge to be
found on them was approximately 1.59 10–19 C. This was recognised as the charge on an e-. The modern value is
1.602  10–19 C.
MASS OF THE ELECTRON
Mass of the e- can be calculate from the value of e/m and the value of e

e 1.602 1019
m=  = 9.1096 10–28 g or = 9.1096  10–31 kg
e / m 17588 108
This is termed as the rest mass of the electron i.e. mass of the electron when moving with low speed. The mass of a
moving e- may be calculate by applying the following formula.

rest mass of e 
Mass of moving e- =
1   v / c
2

Where v is the velocity of the e- and c is the velocity of light.

When v = c  mass of e- = 
v > c  mass of e- = imaginary

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 101
CHEMISTRY FOR JEE MAIN & ADVANCED

ANODE RAYS OR POSITIVE RAYS - (DISCOVERY OF PROTON)

 The first experiment that lead to the discovery of the +ve particle was conducted by 'Goldstein'.
 He used a perforated cathode in the modified cathode ray tube.

Production of Anode rays or Positive rays

 It was observed that when a high potential difference was applied b/w the electrodes, not only cathode rays
were produced but also a new type of rays were produced simultaneously from anode moving towards
cathode and passed through the holes or canals of the cathode. These rays were termed canal rays since
these passed through the canals of the cathode.These were also named anode rays as these originated from
anode.
 When the properties of these rays were studied by Thomson, he observed that these rays consisted of
positively charged particles and named them as positive rays.
 The following characteristics of the positive rays we recognised :
(i) These rays travel in straight lines and cast a shadow of the object placed in their path.
(ii) Like cathode rays, these rays also rotate the wheel placed in their path and also have heating effect.
Thus, the rays passess K.E. i.e. mass particles are present.
(iii) The rays are deflected by electric and magnetic fields towards the negatively charged plate showing
thereby that these rays carry +ve charge.
(iv) The rays produce flashes of light on ZnS screen
(v) These rays can pass through thin metal foil.
(vi) These rays can produce ionisation in gases.
(vii) Positive particles in these rays have e/m value much smaller than that of e-. For a small value of e/m,
it is definite that positive particles possess high mass.
(viii) e/m value is dependent on the nature of the gas taken in the discharge tube, i.e. +ve particles are
different in different gases.
 Accurate measurements of the charge and the mass of the particles in the discharge tube containing hydrogen,
the lightest of all gases, were made by J.J. Thomson in 1906. These particles were found to have the
e/m value as +9.579 104 coulomb/g. This was the maximum value of e/m observed for any +ve particle.
 It was thus assumed that the positive particle given by the hydrogen represents a fundamental particle of
+ve charge. This particle was named proton by Rutherford in 1911. Its charge was found to be equal in
magnitude but opposite in sign to that of electron.
Thus
charge on proton = + 1.602  10-19 columb i.e. one unit +ve charge

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 102
 ATOMIC STRUCTURE

 The mass of the proton, thus can be calculated.

e 1.6 0 2  1 0 19
Mass of the proton =  = 1.672  10–24 g = 1.672  10–27 kg
e/ m 9.5 79  1 0 4
1.6 7 2  1 0 2 4
Mass of proton in amu = = 1.00757 amu.
1.6 6  1 0 2 4
NEUTRON
In 1920, Rutherford suggested that in an atom, there must be present at least a third type of fundamental particles
which should be electrically neutral and posses mass nearly equal to that of proton. He proposed the name for such
fundamental particles as neutron.
In 1932, chadwick bombarded beryllium with a stream of -particles. He observed that penetrating radiations were
produced which were not affected by electric & magnetic fields. These radiations consisted of neutral particles, which
were called neutrons. The nuclear reaction can be shown as

-particle Be-atom Carbon atom Neutron

Charge = +2 Atomic No. = 4 Atomic No. = 6 Charge = 0
Mass = 4 amu Mass = 9 amu Mass = 12 amu Mass = 1 amu
[ 42He + 9Be
4  12C
6 + 1 n]
0

Thus a neutron is a sub atomic particle which has a mass 1.675  10–24 g approximately 1amu, or nearly equal to the mass
of proton or hydrogen atom and carrying no electrical charge.
 The e/m value of a neutron is zero.

ATOMIC STRUCTURE
Atom is actually made of 3 fundamental particles
1. Electron
2. Proton
3. Neutron

Charge (specific Charge)

Fundamental Particle Discovered By Charge Mass
mass
–19 –31
–1.6 × 10 coloumb 9.1 × 10 kg
Electron –10 –28 8
– J.J.Thomson –4.8 × 10 esu 9.1 × 10 g 1.76× 10 C/g
(e or )
–1 Unit 0.000548 amu
–19 –27
+1.6 × 10 coloumb 1.672 × 10 kg
Proton (P) –10 –24 4
+ Goldstein +4.8 × 10 esu 1.672 × 10 g 9.58× 10 C/g
(Ionized H atom, H )
+1 Unit 1.00757 amu
–27
1.675× 10 kg
Neutron James Chadwick 0 –24 0
1.675× 10 g
1
(0 n ) 1.00893 amu

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 103
CHEMISTRY FOR JEE MAIN & ADVANCED

EDUBULL KEY POINTS

1. esu = electrostatic unit
(1 C = 3 × 109 esu)
amu = atomic masss unit
1 amu = 1.6 × 10–24 g = 1.6 × 10–27 kg
2. Order of Mass
m – <m <m
e p n

 Order of Specific Charge

e 
 m  <  e/ m p <  e/ m e –
 n

 mass of proton  m p
 mass of electron  m = 1837
  e–

INTRODUCTION

Atom

A Tom (Greek word)

Not Divisible

Not divisible (According to Dalton)

 Atom is a Greek Word

and its meaning Indivisible i.e. an ultimate particles which cannot be further subdivided.
John Dalton (1803 - 1808) considered that " all matter was composed of small particle called atom.

ACCORDING TO DALTON'S THEORY

(1) Atom is the smallest indivisible part of matter which takes part in chemical reaction.
(2) Atom is neither created nor destroyed.
(3) Representation of atom : Z X A.
Where : A  Mass number, Z Atomic number, X Symbol of atom.
 Mass Number
It is represented by capital A. The sum of number of neutrons and protons is called the mass number. of the
element. It is also known as number of nucleons because neutron & proton are present in nucleus.

A = number of protons + number of neutrons

Note : It is always a whole number.

 Atomic Number
It is represented by Z. The number of protons present in the Nucleus is called atomic number of an element.
It is also known as nuclear charge.
For Neutral Atom : Number of proton = Number of electron
For Charged Atom : Number of e– = Z – (charge on atom)
Z= number of protons only

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 104
 ATOMIC STRUCTURE

For Ex. 35
17Cl
n = 18
p = 17
e = 17
Two different elements can not have the same Atomic Number
Number of Neutrons = Mass number – Atomic number
= A– Z
= (p + n) – p
=n
 Method for Analysis of Atomic Weight
Ex. 12
6C

P+  6 Weight of Proton = 6 × 1.00750

n0 6 Weight of Neutron = 6 × 1.00850
e–  6 Weight of Electron = 6 × 0.000549

Weight of C atom = 12.011 a.m.u.

Mass no. of C atom = 12 [P and n]
Note : Mass no. of atom is always a whole no. but atomic weight may be in decimal.
Ex. If no. of protons in X–2 is 16. then no. of e– in X+2 will be–
(1) 14 (2) 16 (3) 18 (4) None
Sol.  No. of proton in X–2 is = 16
 No. of electron in X+2 is = 14
Ex. In C12 atom if mass of e– is doubled and mass of proton is halved, then calculate the percentage change in mass no. of C12.
Sol. 12
6C
P+ 3
e–  12

e– P+ n°
6 6 6 A  12
12 3 6 A 9

3
% change = × 100 = 25%
12

Ex. Assuming that atomic weight of C12 is 150 unit from atomic table, then according to this assumption, the weight of
O16 will be :-
Sol.  12 amu = 150

1 50
 1 amu =
12

1 50
 16 amu = × 16 = 200 Unit
12

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 105
CHEMISTRY FOR JEE MAIN & ADVANCED

Isotopes : Given by Soddy

They are the atoms of a given element which have the same atomic number (Z) but different mass number (A) i.e. They
have same Nuclear charge (Z) but different number of Neutrons (A–Z).
Ex. 35 37
17Cl 17Cl
n = 18 n = 20
e = 17 e = 17
p = 17 p = 17
 Isotopes have same chemical property but different physical property.
e  Number of electron 
Isotopes do not have the same value of  because mass varies.
m 

mass 
(No. of electron are same but mass varies).
Ex. (Proteium Deuterium Tritium)
1 2 3
1H 1H 1H
e=1 e=1 e=1
p=1 p=1 p=1
n=0 n=1 n=2
e/m 1/1 1/2 1/3
1 H1 is the only normal hydrogen which have n = 0 i.e. no nuetrons
Deuterium is also called as heavy hydrogen. It represent by D
Ex.
12 13 14
6C 6C 6C
e=6 e=6 e=6
p=6 p=6 p=6
n=6 n=7 n=8
Isobars : Given by Aston
They are the atoms of different element which have the same mass number (A) but different Atomic number (Z)
i.e They have different number of Electron, Protons & Neutrons But sum of number of neutrons & Protons i.e. number
of nucleons remains same.
Ex. 3 3
1H 2He
p=1  p=2 
 
e=1  e=2 
n = 2  n = 1 
p+n=3 p+n=3
 Isobars do not have the same chemical & physical property
 They do not have the same value of e/m
Ex. 19 K40 20 Ca
40

p = 19  p = 20 
 
n = 21  n +p = 40 n = 20  n +p = 40
e = 19  e = 20 
19 + 21 = 40 20 + 20 = 40
n + p = 40
Number of Nucleons same

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 106
 ATOMIC STRUCTURE

Isodiaphers
They are the atoms of different element which have the same difference of the number of Neutrons & protons.
Ex. 11 13
5B 6C
p=5  p=6 
 
n = 6  n – p =1 n = 7  n – p =1
e = 5  e = 6 

Ex. 7N15 9F
19

p=7  p=9 
 
n = 8  n – p =1 n = 10  n – p =1
e = 7  e = 9 

Isotones/ Isoneutronic Species / Isotonic

They are the atoms of different element which have the same number of neutrons.
Ex. 3 4
1H 2He
p=1 p=2
n=2 n=2
e=1 e=2

Ex. 39 40
19 K 20 Ca
e = 19 e = 20
p = 19 p = 20
n = 20 n = 20
Isosters
They are the molecules which have the same number of atoms & electrons.
Ex. CO2 N2O
Atoms =1+2 Atoms =2+1
=3 =3
Electrons =6+8× 2 Electrons = 7 × 2 + 8
= 22 e– = 22e–
Ex. CaO KF
Atoms 2 2
Electrons 20 + 8 19 + 9
28 e– 28 e–
Ex. OF2 HClO
Atoms =3 3
Electrons = 8 + 18 1 + 17 + 8
= 26 e– 17 + 9
26 e–

Isoelectronic Species
They are the atoms, molecules or ions which have the same number of electrons.
Ex. Cl– Ar
Electron 18 e– 18 e–

Ex. H2O NH3

e=2+8 e=7+3
10 e– 10 e–

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 107
CHEMISTRY FOR JEE MAIN & ADVANCED

Ex. BF3 SO2

e = 5 +9 × 3 16 + 8 × 2
5 + 27 16 + 16
32 e– 32 e–
Nuclear Isomer
Nuclear isomers (isomeric nuclei) are the atoms with the same atomic number and same mass number but with different
radioactive properties.
Example of nuclear isomers is
Uranium–X (half–life 1.4 min) and
Uranium–Z (half–life 6.7 hours)
The reason for nuclear isomerism is the different energy states of the two isomeric nuclei.
Other examples are
69 69
30 Zn 30 Zn (T1/2 = 13.8 hr) (T1/2 = 57 min)
80 80Br
35 Br 35 (T1/2 = 4.4 hour) (T1/2 = 18 min)

EXAMPLE BASED ON NUCLEAR STRUCTURE

Ex. If the mass of neutrons is doubled & mass of electron is halved then find out the atomic mass of
12 and the percent by which it is increased.
6C
Sol. Step-1 12
6C
e=6

p = 6 = 6 amu 
 = 12 amu
n = 6 = 6 amu 
If the mass of neutrons is doubled and mass of e– is halved then.

n = 12 amu 
 =18 amu
p = 6 amu 
Imp. Note : mass of e– is negligible, so it is not considered in calculation of atomic mass.
Step-2
Final mass - Initial mass
% Increment = ×100
Initial mass
18 - 12
= × 100 50%
12

Ex. If mass of neutron is doubled, mass of proton is halved and mass of electron is doubled then find out the change in
At. wt of 6C12
1. Remain same 2. Increased by 25%
3. Increased by 37.5% 4. None of them
Sol. Step-1 6 C12
e=6

p=6 
 = 12 amu
n=6 

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 108
 ATOMIC STRUCTURE

If mass of neutron is doubled, mass of proton is halved and mass of electron is doubled,then new atomic mass will
be :
n = 12 amu 
 = 15amu
p = 3 amu 
Final mass - Initial mass 15 - 12
Step-2 % Increment = × 100 = × 100 25%
Initial mass 12

ATOMIC MODELS
THOMSON'S MODEL OF ATOM [1904]
- e-
 Thomson was the first to propose a detailed model of the atom. - -
-
 Thomson proposed that an atom consists of a uniform sphere of - - - -
-
positive charge in which the electrons are present at some places. - -
-
 This model of atom is known as 'Plum-Pudding model'. - sphere of
- +ve charge

Drawbacks
 An important drawback of this model is that the mass of the atoms is considered to be evenly spread over
that atom.
 It is a static model. It does not reflect the movement of electron.

RUTHERFORD'S - SCATTERING EXPERIMENT

-Scattering Experiment
Thin gold foil (.00004 cm)

Most of
 – particles
strike here
 - Ray
 
ZnS screen

Source [Ra] of 
-rays Slit system Circular
 = [2He4]+2 [lead plate] fluorescent
[doubly ionised He particle] screen

Rutherford Observed That

(i) Most of the -particles (nearly 99.9%) went
straight without suffering any deflection.
(ii) A few of them got deflected through small
angles.
(iii) A very few -particles (about one in 20,000)
did not pass through the foil at all but
suffered large deflections (more than 90°)
or even come back in the direction from
which they have come i.e. a deflection of
180°.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 109
CHEMISTRY FOR JEE MAIN & ADVANCED

Following Conclusions were Drawn from the Above Observations

(1) Since most of the -particle went straight through the metal foil undeflected, it means that there must be very
large empty space within the atom.
(2) Since few of the -particles were deflected from their original path through moderate angles; it was concluded
that whole of the +ve charge is concentrated and the space occupied by this positive charge is very small in
the atom.
 Whenever -particles come closer to this point, they suffer a force of repulsion and deviate from their
paths.
 The positively charged heavy mass which occupies only a small volume in an atom is called nucleus. It is
supposed to be present at the centre of the atom.
(3) A very few of the-particles suffered strong deflections on even returned on their path indicating that the
nucleus is rigid and -particles recoil due to direct collision with the heavy positively charged mass.
(4) The relation between number of deflected particles and deflection angle  is

1
µ= [ increases µ decreases]

sin4
2
where µ = deflected particles  = deflection angle
 As atomic number increases, the number of protons increases which increases the repulstion and so deflection
angle  increases.

APPLICATIONS OFRUTHERFORD MODEL

On the basis of scattering experiments, Rutherford proposed the model of an atom, which is known as nuclear atomic
model. According to this model -
(i) An atom consists of a heavy positively charged nucleus where all the protons are present.
(ii) The volume of the nucleus is very small and is only a minute fraction of the total volume of the atom. Nucleus
has a radius of the order of 10-13 cm and the atom has a radius of the order of 10-8 cm

rA radius ofthe atom 1 0 8

  13 = 105, r = 105 r
rN radius ofthe nucleus 1 0 A N

Thus radius (size) of the atom is 105 times the radius of the nucleus.
 The radius of a nucleus is proportional to the cube root of the mass no. of the nucleus.
R A1/3  R = R0A1/3 cm
Where R0 = 1.33 10-13(a constant) and, A = mass number (p + n)
R = radius of the nucleus.
R = 1.33 × 10–13 A1/3 cm
(iii) There is an empty space around the nucleus called extra nuclear part. In this part electrons are present. The
no. of electrons in an atom is always equal to no. of protons present in the nucleus. As the nuclear part of
atom is responsible for the mass of the atom, the extra nuclear part is responsible for its volume. The volume
of the atom is about 1015 times the volume of the nucleus.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 110
 ATOMIC STRUCTURE

F
G
4 3 IJ
H Ke j
3
rA 1 0 8
vol. of the atom 3
vol. of the nucleus

F
G
4 3

IJ e j 3
 1 01 5

3 H
rN
K
1 0 1 3

(iv) Electrons revolve round the nucleus in closed orbits with high speeds.
 This model was similar to the solar system, the nucleus representing the sun and revolving electrons as planets.
Drawbacks of Rutherford Model
(1) This theory could not explain the stability of an atom. According to
Nucleus
Maxwell electron loses it's energy continuously in the form of
electromagnetic radiations. As a result of this, the e- should loss energy
at every turn and move closer and closer to the nucleus following a
spiral path. The ultimate result will be that it will fall into the nucleus,
thereby making the atom unstable. e–
(2) If the electrons loose energy continuously, the observed spectrum should be continuous but the actual
observed spectrum consists of well defined lines of definite frequencies (discontinuous). Hence, the loss of
energy by electron is not continuous in an atom.

Electromagnetic Waves (EM waves) or Radiant Energy/Electromagnetic Radiation

 It is the energy transmitted from one body to another in the form of waves and these waves travel in the
space with the same speed as light ( 3 × 108 m/s) and these waves are known as Electromagnetic waves or
radiant energy.
 The radiant Energy do not need any medium for propogation.

Ex : Radio waves, micro waves, Infra red rays, visible rays, ultraviolet rays, x–rays, gama rays and cosmic rays.

In Å 10–4 0.01 0.1 150 3800 7600 6 × 106 3 × 109 3 × 1014

Cosmic –rays x–rays Ultra Visible Infra red Micro Radio

ray's violet wave waves

V I B G Y O R

Violet Indigo Blue Green Yellow Orange Red

3800 4300 4500 4900 5500 5900 6500 7600

(In A°)

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 111
CHEMISTRY FOR JEE MAIN & ADVANCED

A wave is characterized by following six characterstics.

The upper most point of the wave is called crest and the
lower most point is called trough. Crest Crest

Some of the terms employed in dealing with the waves are a

described below. a Direction of
Propagation
Trough Trough

EDUBULL KEY POINTS

Some important characteristics of a wave
Wavelength of a wave is defined as the distance between any two consecutive crests or troughs. It is represented
by  (lambda) and is expressed in Å or m or cm or nm (nanometer) or pm (picometer).
1 Å = 10– 8 cm = 10–10 m
1 nm = 10– 9 m, 1 pm = 10–12 m
Frequency of a wave is defined as the number of waves passing through a point in one second. It is represented
by  (nu) and is expressed in Hertz (Hz) or cycles/sec or simply sec–1 or s–1.
1 Hz = 1 cycle/sec
Velocity of a wave is defined as the linear distance travelled by the wave in one second. It is represented by v and
is expressed in cm/sec or m/sec (ms–1).
Amplitude of a wave is the height of the crest or the depth of the trough. It is represented by ‘a’ and is expressed
in the units of length.
Wave number is defined as the number of waves present in 1 cm length. Evidently, it will be equal to the reciprocal
of the wavelength. It is represented by  (read as nu bar).
1


If  is expressed in cm,  will have the units cm–1.
Relationship between velocity, wavelength and frequency of a wave. As frequency is the number of waves passing
through a point per second and  is the length of each wave, hence their product will give the velocity of the wave.
Thus
v=×
Order of wavelength in Electromagnetic spectrum
Cosmic rays <  – rays < X-rays < Ultraviolet rays < Visible < Infrared < Micro waves < Radio waves.

Ex. The vividh Bharti station of All India Radio broadcast on a frequency of 1368 Kilo Hertz. Calculate the wave length
of the Electromagnetic waves emited by the transmitter.
Sol. As we know velocity of light (C)
C = 3 × 108 m/sec.
Given (frequency)
= 1368 kHz
= 1368 × 103 Hz
= 1368 × 103 sec–1

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 112
 ATOMIC STRUCTURE

C 3 × 10 8 msec -1
 λ=  λ=   = 219.3 m
ν 1368 × 10 3 sec -1

Ex. Calculate  in cm–1 and  of yellow radiations having wavelength of 5800 Å

1
Sol. As we known ν =
λ
1

5800 Å

1
 {1Å = 10–8 cm}
5 8 00  10 8 cm

108
= cm–1 = 17241.4 cm–1
5800
 = c 
= 3 × 1010 cm sec–1 × 1.7 × 104 cm–1
= 3 × 1.7 × 1014
= 5.1 × 1014 sec-1

Ex. A particular radiostation broadcast at a frequency of 1120 Kilo Hertz another radio station broadcast at a frequency
of 98.7 mega Hertz. What are the wave length of radiations from each station.
Sol. Station Ist

C 3  10 8 m sec 1
  = 267.86 m
 1 12 0  1 0 3 sec 1
Station IInd
C 3  10 8 m sec 1
 
 98.7  10 6 sec 1
= 3.0395 m

Ex. How long would it take a radio wave of frequency 6 × 103 sec–1 to travel from mars to the earth, a distance of 8 × 107 km ?
Sol. Distance to be travelled from mars to earth
= 8 × 107 km
= 8 × 1010 m
 Velocity of EM waves
= 3 × 108 m/sec

Dis tan ce 8  10 1 0 m
 Time = 
Velocity 3  10 8 m / sec 1
= 2.66 × 102 sec.

Ex. What will be the frequency of photon of wavelength 2225 Å traveling in vacuum ?
Sol. Velocity of light in vacuum = 3 × 108 m sec–1
Wavelength = 2225 × 10–10 meter

Velocity 3  1 0 8 meter / sec 3000

Frequency = = =  1 0 5 sec 1
Wavelength 2 2 2 5  1 0 1 0 meter 2225
= 1.349 × 1015 sec–1

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 113
CHEMISTRY FOR JEE MAIN & ADVANCED

Particle Nature of Electromagnetic Radiation : Planck's Quantum Theory

Some of the experimental phenomenon such as diffraction and interference can be explained by the wave nature of
the electromagnetic radiation. However, following are some of the observations which could not be explained
(i) the nature of emission of radiation from hot bodies (black - body radiation)
(ii) ejection of electrons from metal surface when radiation strikes it (photoelectric effect)

Black Body Radiation

When solids are heated they emit radiation over a wide range of wavelengths.
The ideal body, which emits and absorbs all frequencies, is called a black body and the radiation emitted by such a
body is called black body radiation. The exact frequency distribution of the emitted radiation (i.e., intensity versus
frequency curve of the radiation) from a black body depends only on its temperature.

The above experimental results cannot be explained satisfactorily on the basis of the wave theory of light. Planck
suggested that atoms and molecules could emit (or absorb) energy only in discrete quantities and not in a continuous
manner.
Quantum Theory of Light
The smallest quantity of energy that can be emitted or absorbed in the form of electromagnetic radiation is called as
quantum of light.
According to Planck, the light energy coming out from any source is always an integral multiple of a smallest energy
value called quantum of light.
Let quantum of light be = E0(J), then total energy coming out is = nE0 (n = Integer)
Quantum of light = Photon ( Packet or bundle of energy)
Energy of one photon is given by
E0 = h (- Frequency of light)
h = 6.626 x 10–34 J-Sec (h - Planck const.)
hc
E0 = (c - speed of light)

( - wavelength)

10 -34 ×10 8
Order of magnitude of Eo = = 10–16 J
10 -10

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 114
 ATOMIC STRUCTURE

EDUBULL KEY POINTS

Units of Energy are
S.I. unit – Joule (J)
C.G.S. unit – erg
Other unit – electron volt (ev)
1 ev = 1.6 × 10–19 J, 1 erg = 10–7 J
hc
while using the formula E0 = use hc = 1240 ev - nm = 12400 ev - Å


Ex. Certain sun glasses having small of AgCl incorporated in the lenses, on expousure to light of appropriate wavelength
turns to gray colour to reduce the glare following the reactions:
hv  Ag(Gray) + Cl
AgCl 
If the heat of reaction for the decomposition of AgCl is 248 kJ mol–1, what maximum wavelength is needed to induce
the desired process?
Sol. Energy needed to change = 248 × 103 J/mol
If photon is used for this purpose, then according to Einstein law one molecule absorbs one photon.
hc
Therefore,  NA . = 248 × 103

6.626  10 34  3.0  10 8  6.023  10 23
= = 4.83 × 10–7 m
248  10 3

PHOTOELECTRIC EFFECT (P.E.E.)

The ejection of electrons when light of certain minimum frequency called as threshold frequency is incident on a
matel surface is called as photoelectric effect. When certain metals (for example Potassium, Rubidium, Caesium etc.)
were exposed to a beam of light electrons were ejected as shown in Fig.

Light

Detector
Metal surface

Electrons

Ammeter

Vacuum chamber

Battery

Some important terms regarding P.E.E.

Threshold Frequency : Threshold frequency is defined as the minimum frequency of incident light which can cause
photo electric emission i.e. this frequency is just able to eject electrons with out giving them additional energy.
Work Function : The minimum quantity of energy which is required to remove an electron to infinity from the
surface of a given solid, usually a metal.
Threshold frequency is the minimum frequency required and work function is the minimum energy required.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 115
CHEMISTRY FOR JEE MAIN & ADVANCED

The phenomenon is called Photoelectric effect. The results observed in this experiment were :
(i) The electrons are ejected from the metal surface as soon as the beam of light strikes the surface, i.e., there is no time
lag between the striking of light beam and the ejection of electrons from the metal surface.
(ii) The number of electrons ejected is proportional to the intensity or brightness of light.
(iii) For each metal, there is a characteristic minimum frequency, 0 (also known as threshold frequency) below which
photoelectric effect is not observed. At a frequency  > 0, the ejected electrons come out with certain kinetic
energy. The kinetic energies of these electrons increase with the increase of frequency of the light used.

Photoelectric Effect Equation

When a photon of sufficient energy strikes an electron in the atom of the metal, it transfers its energy instantaneously
to the electron during the collision and the electron is ejected without any time lag or delay. Greater the energy
possessed by the photon, greater will be transfer of energy to the electron and greater the kinetic energy of the
ejected electron. In other words, kinetic energy of the ejected electron is proportional to the frequency of the
electromagnetic radiation. Since the striking photon has energy equal to h and the minimum energy required to
eject the electron is h0 (is also called work function, W0) then the difference in energy (h – h0) is transferred as
the kinetic energy of the photoelectron. Following the conservation of energy principle, the kinetic energy of the
ejected electron is given by the equation
Incident energy = Work Function () + K.E.max
Ei =  + (K.E.)max
1
h = h0 + m 2
2 e
where me is the mass of the electron and v is the velocity associated with the ejected electron.

Ex. The threshold frequency 0 for a metal is 6 × 1014 s–1. Calculate the kinetic energy of an electron emitted when
radiation of frequency  = 1.1 × 1015 s–1 hits the metal.
1
Sol. K.E. = m V2 = h ( – 0)
2 e
 K.E. = (6.626 × 10–34) (1.1 × 1015 – 6 × 1014)
 K.E. = (6.626 × 10–34) (5 × 1014)
= 3.313 × 10–19 J

Ex. A photon of wavelength 3000 Å strikes a metal surface, the work function of the metal being 2.20 eV. Calculate
(i) The energy of the photon in eV (ii) the kinetic energy of the emitted photo electron and (iii) the velocity of the
photo electron.
Sol. (i) Energy of the photon
hc  6.6 × 10 Js  3 × 10 ms 
-34 8 -1

E = h = = = 6.6 × 10–19 J
 3 × 10 -7 m
1eV = 1.6 × 10–19 J

6.6 × 10 -19 J
Therefore E = = 4.125 eV
1.6 × 10 -19 J / ev
(ii) Kinetic energy of the emitted photo electron
Work function = 2.20 eV
Therefore, KE = 2.475 – 2.20 = 1.925 eV = 3.08 × 10–19 J
(iii) Velocity of the photo electron
1
KE = mv2 = 3.08 × 10–19 J
2
2 × 3.08 × 10 -19
Therefore, velocity (v) = = 8.22 × 105 ms–1
9.1 × 10 -31

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 116
 ATOMIC STRUCTURE

BOHR’S ATOMIC MODEL

It is based on quantum theory of light. It is applicable only for single electron species. Ex. H, He +, Li2+, etc.
Assumptions of Bohr’s Model

 The electron in the hydrogen atom revolves around the nucleus in a 4 or N

circular path of fixed radius and energy. These paths are called orbits, 3 or M
stationary states, energy shells, or allowed energy states. these 2 or L
stationary states for electrons are numbered as n = 1, 2, 3, ... or 1 or K
designated as K, L, M, N, ..., etc. shells (Fig.) These integral numbers + Nucleus
are known as principal quantum numbers. These orbits are arranged
concentricallly around the nucleus.

Bohr's orbit

 Electrons revolve only in those orbits where the angular momentum V

of the electron is quantized. Thus an electron can move only in those
orbits for which its angular momentum is an integral multiple of h/2.

h
mvr = n +
2π
where n = 1, 2, 3, ..., n ; h is Planck’s constant; m is mass of electron ;
v is the velocity of electron; and r is the radius of the orbit.

 The energy of an electron in the orbit does not change with time. This means that the eneryg of an electron
in a particular orbit remains constant; it does not lose or gain energy.

 The electron will move from a lower stationary state to a higher stationary state when the required amount
of energy is absorbed by the electron. When the electron jumps back to the lower energy level, it emits the
same amount of energy. The energy change does not take place in a continuous manner.

 The frequency of radiation absorbed or emitted when transition occurs between two stationary states that
differ in energy by E is given by

ΔE E 2 – E1
= =
h h
where E1 and E2 are the energies of the lower and higher allowed energy states, respectively. This expression
is called Bohr’s frequency rule.

Mathematical forms of Bohr’s Postulates

Calculation of The Radius of The Bohr’s Orbit : Suppose that an electron having mass ‘m’ and charge ‘e’ revolving
around the nucleus of charge ‘Ze’ (Z is atomic number & e = charge) with a tangential/linear velocity of ‘v’. Further
consider that ‘r’ is the radius of the orbit in which electron is revolving.
According to Coulomb’s law, the electrostatic force of attraction (F) between the moving electron and nucleus is –
KZe 2 1
F= 2 where : K = constant = 4 = 9 x 109 Nm2/C2
r 0

mv 2
and the centrifugal force F =
r

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 117
CHEMISTRY FOR JEE MAIN & ADVANCED

For the stable orbit of an electron both the forces are balanced.
2
mv 2 KZe
i.e =
r r2

KZe 2
then v2 = ......... (i)
mr
From the postulate of Bohr,
nh nh
mvr =  v =
2 2mr
n 2h 2
On squaring v2 = ........ (ii)
4π 2 m 2 r 2
From equation (i) and (ii)
2 2
KZe 2 n h
=
mr 4π 2 m 2 r 2
On solving, we will get

n 2h 2
r=
4π 2 mKZe 2

On putting the value of e , h , m, the radius of nth Bohr orbit is given by :

n2 n2 r1 n12 Z2
rn = 0.529 x Å 

r   = ×
Z Z r2 n 22 Z1
Ex. Calculate radius ratio for 2nd orbit of He+ ion & 3rd orbit of Be+++ ion.
 22 
Sol. r1 (radius of 2nd orbit of He+ ion) = 0.529  Å

 2 

 32 
r2 (radius of 3rd orbit of Be+++ ion) = 0.529  Å

 4 

r1 0.529× 22 / 2 8
Therefore = =
r2 0.529×32 / 4 9

Calculation of Velocity of an Electron in Bohr’s Orbit

Angular momentum of the revolving electron in nth orbit is given by
nh
mvr =
2π
nh
v= ......... (iii)
2πmr
put the value of ‘r’ in the equation (iii)

nh ×4π2 mZe2 K
then, v=
2πmn 2 h 2
Ze 2K
v=
nh

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 118
 ATOMIC STRUCTURE

on putting the values of , e-, h and K

Z 1
velocity of electron in nth orbit vn = 2.18 x 106 x m/sec ; v Z ; v 
n n

Z Z v v1 ZZ1 n n 2
 v
v   = = ××

n n v v 2 ZZ 2 n n1
2πr
T, Time period of revolution of an electron in its orbit = substituting the value of 'r' and 'v' we get
v

n3 n3 T1 n13 Z22
Time Period, T = 1.52 × 10–16 ×  T  = ×
Z2 Z2 T2 n 32 Z12

v 1
f, Frequency of revolution of an electron in its orbit = =
2r T
Calculation of Energy of an Electron
The total energy of an electron revolving in a particular orbit is
T.E. = K.E. + P.E.
where :
P.E. = Potential energy , K.E. = Kinetic energy , T.E. = Total energy
1
The K.E. of an electron = mv2
2

KZe 2
and the P.E. of an electron = –
r

1 KZe 2
Hence, T.E. = mv2 –
2 r

mv 2 KZe 2 KZe 2 1 KZe 2

we know that, = or mv2 =  K.E. =
r r2 r 2 r
substituting the value of mv2 in the above equation :

KZe 2 KZe 2 KZe 2

T.E. = – =–
2r r 2r

KZe 2 P.E.
So, T.E. = –  T.E. = – K.E. =
2r 2

substituting the value of ‘r’ in the equation of T.E.

KZe 2 4π 2 Ze 2 m 2π 2 Z 2 e 4 m K 2
Then T.E. = – x = –
2 n 2h 2 n2h2
Thus, the total energy of an electron in nth orbit is given by
2
2 2 me 4 k 2  z 
T.E. = En = –  n2  ... (iv)
h2  

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 119
CHEMISTRY FOR JEE MAIN & ADVANCED

Putting the value of m,e,h and  we get the expression of total energy

Z2
En = – 13.6 2 eV / atom as the value of n increases , energy of an electron in the orbit increases.
n

Note : - The P.E. at the infinite = 0

The K.E. at the infinite = 0

EDUBULL KEY POINTS

Conclusion from Equation of Energy
(a) The negative sign of energy indicates that there is attraction between the negatively charged electron and
positively charged nucleus.
(b) All the quantities on R.H.S. in the energy equation [Eq. iv] are constant for an element having atomic number
Z except ‘n’ which is an integer such as 1,2,3, etc . i.e. the energy of an electron is constant as long as the value
of ‘n’ is kept constant.
(c) The energy of an electron is inversely proportional to the square of ‘n’ with negative sign.

ENERGY LEVEL DIAGRAM

(i) Orbit of lowest energy is placed at the bottom, and all other orbits are placed above this.
(ii) The gap between two orbits is proportional to the energy difference of the orbits.
0 eV n=
-0.85 eV n=4
-1.51eV n=3
-3.4eV n=2

12.1eV
10.2eV
-13.6eV n=1
Energy level diagram of H-atom
Definition Valid for Single Electron System
(i) Ground state
Lowest energy state of any atom or ion is called ground state of the atom It is n = 1.
Ground state energy of H–atom = – 13.6 ev
Ground state energy of He+ on = – 54.4 ev
(ii) Excited State
States of atom other than the ground state are called excited states :
n=2 first excited state
n=3 second excited state
n=4 third excited state
n=n+1 nth excited state
(iii) Ionisation Energy (IE)
Minimum energy required to move an electron from ground state to
n =  is called ionisation energy of the atom or ion.
I.E. = Energy of first shell.
onisation energy of H–atom = 13.6 ev
onisation energy of He+ ion = 54.4 ev

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 120
 ATOMIC STRUCTURE
onisation energy of Li+2 ion = 122.4 ev
(iv) Ionisation Potential (I.P.)
Potential difference through which a free electron must be accelerated from rest, such that its kinetic energy
becomes equal to ionisation energy of the atom is called ionisation potential of the atom.
.P. of H atom = 13.6 V, .P. of He+ on= 54.4 V

(v) Excitation Energy

Energy required to move an electron from ground state of the atom to any other state of the atom is called
excitation energy of that state.
Excitation energy of 2nd state = excitation energy of 1st excited state = 1st excitation energy = 10.2 ev.

(vi) Excitation Potential

Potential difference through which an electron must be accelerated from rest to so that its kinetic energy
become equal to excitation energy of any state is called excitation potential of that state.
Excitation potential of third state = excitation potential of second exicited state = second excitation potential = 12.09 V.
(vii) Binding Energy ‘or’ Seperation Energy
Energy required to move an electron from any state to n =  is called binding energy of that state.
Binding energy of ground state = .E. of atom or on.

Ex. A single electron system has ionization energy 11180 kJ mol–1 . Find the number of protons in the nucleus of the
system.

Z2
Sol. .E. = × 21.69 × 10–19 J
n2

11180 ×10 3 Z2
= × 21.69 × 10–19 Ans. Z = 3
6.023×10 23 12

Hydrogen Spectrum
Study of Emission and Absorption Spectra
An instrument used to separate the radiation of different wavelengths (or frequencies) is called spectroscope or a
spectrograph. Photograph (or the pattern) of the emergent radiation recorded on the film is called a spectrogram or
simply a spectrum of the given radiation The branch or science dealing with the study of spectra is called spectroscopy.
Spectrum

Based on Based on
Nature origin

Continuous Discrete Absorption Emission

spectrum spectrum
Band Line
Spectrum Spectrum

Emission Spectra
When the radiation emitted from some source e.g. from the sun or by passing electric discharge through a gas at low
pressure or by heating some substance to high temperature etc, is passed directly through the prism and then

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 121
CHEMISTRY FOR JEE MAIN & ADVANCED

received on the photographic plate, the spectrum obtained is called ‘Emission spectrum’.
Depending upon the source of radiation, the emission spectra are mainly of two type :

(a) Continuous Spectra

When white light from any source such as sun, a bulb or any hot glowing body is analysed by passing through a
prism it is observed that it splits up into seven different wide band of colours from violet to red. These colours are
so continuous that each of them merges into the next. Hence the spectrum is called continuous spectrum.

White light
R
O
Beam
Y
G
B
I
Slit Prism V
Photographic
Plate

(b) Discrete Spectra : It is of two type

(i) Band Spectrum

Dark space

Band

Band spectrum contains colourful continuous bands sepearted by some dark space.
Generally molecular spectrum are band spectrum

(2) Line Spectrum

This is the ordered arrangement of lines of particular wavelength seperated by dark space eg. hydrogen spectrum.
Line spectrum can be obtained from atoms.

2. Absorption Spectra
When white light from any source is first passed through the solution or vapours of a chemical substance and then
analysed by the spectroscope, it is observed that some dark lines are obtained in the continuous spectrum. These
dark lines are supposed to result from the fact that when white light (containing radiations of many wavelengths) is
passed through the chemical substance, radiations of certain wavelengths are absorbed, depending upon the

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 122
 ATOMIC STRUCTURE

nature of the element.

White
light R
O
Y}
NaCl G
Solution B
I
Slit Prism V
Photographic
Plate

Dark lines in yellow region

of continuous spectrum

Emission Spectrum of Hydrogen

Beam
H2 Gas

Slit Prism Photographic

Plate

When hydrogen gas at low pressure is taken in the discharge tube and the light emitted on passing electric
discharge is examined with a spectroscope, the spectrum obtained is called the emission spectrum of hydrogen.

Line Spectrum of Hydrogen

Line spectrum of hydrogen is observed due to excitation or de-excitation of electron from one stationary orbit to
another stationary orbit
Let electron make transition from n2 to n1 (n2 > n1) in a H-like sample
2
– 13.6 Z
eV n2
n 2
2

– 13.6 Z2 n1
eV
n1
2

photon

-13.6Z 2  -13.6Z 2   1 1 
Energy of emitted photon = (E)n2  n1 = –   = 13.6Z2  2 - 2 
 n1 n 2 
2
 n1
2
n2 
Wavelength of emitted photon

hc
=
( E)n2 n1

hc
=
 1 1 
13.6Z 2  2 - 2 
 n1 n 2 

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 123
CHEMISTRY FOR JEE MAIN & ADVANCED

1 (13.6)z 2  1 1 
=  2- 2
 hc  n1 n 2 

1  1 1 
Wave number, =  = RZ2  2 – 2 
  n1 n 2 

13.6eV
R = Rydberg constant = 1.09678 × 107m–1 ; R ~ 1.1 × 107 m–1 ; R = ; R ch = 13.6 eV
hc

8
7
6
5 Pfund
4 Series
Bracket
Series
3
Paschen
Series

2
Balmer
Series

1
Lyman
Series

Ex. Calculate the wavelength of a photon emitted when an electron in H- atom maker a transition from n = 2 to n = 1
1  1 1 
Sol. = RZ2  2 - 2 
  n1 n 2 

1 1 1 
 = R(1)2  2 - 2 
 1 2 
1 3R 4
 = or  
 4 3R

Spectra Lines of Hydrogen Atom

LYMAN SERIES
• It is first spectral series of H.
• It was found out in ultraviolet region in 1898 by Lyman.
• It’s value of n1 = 1 and n2 = 2,3,4 where ‘n1’ is ground state and ‘n2’ is called excited state of electron present in a

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 124
 ATOMIC STRUCTURE
H - atom.

1 1 1 
• = RH  2 - 2  where n2 > 1 always.
 1 n 2 

n12 1
• The wavelength of marginal line =
RH
for all series. So for lyman series  = R .
H

• st line of lyman series  2  1

nd line of lyman series = 3  1
Last line of lyman series =   1
[10.2 eV  (E) lyman  13.6 eV]
12400 
 lyman  12400 Aº
13.6 10.2
12400
• Longest Line : longest wavelength line  longest or  max. =
( E)min

12400
• Shortest Line : shortest wavelength line  shortest or  min =
( E)max

• First line of any spectral series is the longest ( max) line.

• Last line of any spectral series is the shortest ( min) line.

Series Limit
t is the last line of any spectral series.
Wave no of st line of Lyman series

1 1 1 
= =  = R × 12  2 - 2 
 1 2 

 4 -1 
= R×1  4 
2
 
R × 3 3R
= 4
=
4

 4 
 λ = 3R 
 
Wave no of last line of Lyman series

 1 1 
 = R × 12  2  2 
 1  
 =R
For Lyman series,
12400 12400
 longest = , shortest =
(ΔE) 2-1  ΔE   1
BALMER SERIES

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 125
CHEMISTRY FOR JEE MAIN & ADVANCED

• It is the second series of H-spectrum.

• It was found out in 1892 in visible region by Balmer.
• It’s value of n1 = 2 and n2 = 3,4,5,.............

n12 22 4
• The wavelength of marginal line of Balmer series =
RH
=
RH
=
RH

1  1 1 
• 
= RH  2  2  where n2 > 2 always.
 2 n2 
1.9  (E)balmer  3.4 eV..
All the lines of balmer series in H spectrum are not in the visible range. nfact only st 4
lines belongs to visible range.

12400 12400
Aº   balmer  Å
3 .4 1. 9

3648 Å   balmer  6536 Å

Lines of balmer series (for H atom) lies in the visible range.
Ist line of balmer series = 3  2
last line of balmer series =   2

 1 1  5R
(  ) 1st line = R ×1  2  2  =
2 3  36

 1 1  R
(  ) last line = R  2  2  =
2   4

PASCHEN SERIES
(a) It is the third series of H - spectrum.
(b) It was found out in infrared region by Paschen.
(c) It’s value of n1 = 3 and n2 = 4,5,6 ........

n12 32 9
(d) The wavelength of marginal line of Paschen series = = = .
RH RH RH

1  1 1
(e) = RH  2  2  where n2 > 3 always.
  3 n 2 

BRACKETT SERIES
(a) It is fourth series of H - spectrum.
(b) It was found out in infrared region by Brackett.
(c) It’s value of n1 = 4 and n2 = 5,6,7 ..............

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 126
 ATOMIC STRUCTURE

n12 42 16
(d) The wavelength of marginal line of brackett series = = =
RH RH RH

1  1 1
(e) = RH  2  2  where n > 4 always.
 4 n2 
 2

PFUND SERIES
(a) It is fifth series of H- spectrum.
(b) It was found out in infrared region by Pfund.
(c) It’s value of n1 = 5 and n2 = 6,7,8 ............... where n1 is ground state and n2 is excited state.

n12 52 25
(d) The wavelength of marginal line of Pfund series = = =
RH RH R H

1  1 1
(e) = RH  2  2  where n > 5 always.
 5 n2 
 2

HUMPHRY SERIES
(a) It is the sixth series of H - spectrum.
(b) It was found out in infrared region by Humphry.
(c) It’s value of n1 = 6 and n2 = 7 , 8 , 9 ...................

n12 62 36
(d) The wavelength of marginal line of Humphry series = = =
RH RH R H

1  1 1
(e) = RH  2  2  where n > 6.
  6 n2  2

Ex. Calculate wavelength for 2nd line of Balmer series of He+ ion

1 1 1
Sol.  R(2)2  2  2 
  n1 n2 

n1 = 2 n2 = 4

1  1 1
 R( 2 2 )  2  2 
 2 4 

1 3R 4
 = Ans.
 4 3R

No. of Photons Emitted by a Sample of H Atom

If an electron is in any higher state n = n and makes a transition to ground state, then total no. of different photons
n  (n  1)
emitted is equal to .
2

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 127
CHEMISTRY FOR JEE MAIN & ADVANCED

If an electron is in any higher state n = n2 and makes a transition to another excited state n = n1, then total no. of
(n 2 – n1 )(n 2 – n1 +1)
different photons emitted is equal to
2
Note : In case of single isolated atom if electron make transition from n th state to the ground state then max. number of
spectral lines observed = (n–1)
Ex. If electron make transition from 7th excited state to 2nd state in H atom sample find the max. number of spectral lines
observed.
Sol. n = 8 – 2 = 6

 6  1 7
spectral lines = 6   = 6× = 21
 2  2

SOMMERFELD EXTENSION OF THE BOHR'S MODEL

 According to sommerfeld electron revolve around the nucleus in the Elliptical Orbits.
 Circular orbit is a special case of elliptical orbit when the length of major axis becomes equal to the length of minor
axis then the shape of orbit will be circular.

 If electrons revolve in elliptical orbit then its angular momentum shows two components
1. Radial Component
nrh
Jr =
2
where nr = radial quantum number.
[nr = (n – 1).................0]
n = Shell number
2. Azimuthal Components
h
J= n
2
n = Azimuthal quantum number
[ n = 1, 2, 3, 4.............n]
n = Shell number
So total Angular momentum = Jn
Jn = Jr + J
nh nr h h
= + n
2π 2π 2
n = nr + n where n = principal quantum number

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 128
 ATOMIC STRUCTURE

Ex. Let n=4 n = nr + n

Then 4 = 3 +1
4 = 2 +2
4 = 1 +3
4 = 0 +4
 The length of major axis indicates by nr + ni.e. n and length of minor axis indicates by n
 The path of electron
n r  n n Length of major axis
K= = =
n n  Length of minor axis

n varies is from 1 to n.

 If n = 4 then n= 1, 2, 3, 4

4 4 4 4
K = , , ,
1 2 3 4
3 Elliptical path circular path
 If n = 5 then n= 1, 2, 3, 4, 5
5 5 5 5 5
 K = , , , ,
1 2 3 4 5
4 Elliptical path Circular path
 If n = 1 Then Elliptical path = ( n – 1) = ( 1 – 1) = 0
Circulars path = 1
In nth Orbit : Number of elliptical path = (n – 1)
Number of circular path = 1
In every atom, 1st orbit is always circular.

Failures / Limitations of Bohr’s Theory

(a) He could not explain the line spectra of atoms containing more than one electron.
(b) He also could not explain the presence of multiple spectral lines.
(c) He was unable to explain the splitting of spectral lines in magnetic field (Zeeman effect) and in electric field
(Stark effect)
(d) No conclusion was given for the principle of quantisation of angular momentum.
(e) He was unable to explain the de-Broglie’s concept of dual nature of matter.
(f) He could not explain Heisenberg’s uncertainty principle.

THE DUALNATURE OF MATTER (THE WAVE NATURE OF ELECTRON)

1. In 1924. a French physicist, Louis De Broglie suggested that if the nature of light is both that of a particle
and of a wave, then this dual behavior should be true for the matter also.
2. According to De Broglie, the wavelength of an electron is inversely proportional to its momentum p.
1 1
 or 
p mv

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 129
CHEMISTRY FOR JEE MAIN & ADVANCED

h
 Here h = Planck's constant
p
p = momentum of electron
 Momentum (p) = Mass (m) × Velocity (c)

h h
  =
mv 2m(K.E.)
From the de-Broglie equation it follows that wavelength of a particle decrease with increase in velocity of the particle.
Moreover, lighter particles would have longer wavelength than heavier particles, provided velocity is equal.
 If a charged particle Q is accelerated through potential difference V from rest then de-broglie wavelength
is

h 150 12.25
λ= for an electron  = Å= Å
2mQV v v
 de-Broglie concept is more significant for microscopic or sub-microscopic particles whose wavelength
can be measured.
 The circumference of the nth orbit is equal to n times the De-broglie wavelength of the electron revolving
around the nucleus.
2 rn  n  where n = no. of shells or no. of waves.

Ex. Two particles X and Y are in motion. If the wavelength associated with particle X is 4 × 10–8 m, calculate the wavelength
associated with particle Y if its momentum is half of X.
Sol. According to de Broglie equation

h h
x = and y =
px p y

x p
 y
y px
But py = ½ px (given)
x 1 / 2p x
 =½
y px
B = 2A = 2 × 4 × 10–8m = 8 × 10–8m

Ex. Calculate the de Broglie wavelength of a ball of mass 0.1 kg moving with a speed of 30 ms–1.

h 6.6 × 10 -34
Sol. = =
mv 0.1 × 30
 = 2.2 × 10–34 m
This is apparent that this wavelength is too small for ordinary observation.
Although the de Broglie equation is applicable to all material objects but it has significance only in case of microscopic
particles.
Since, we come across macroscopic objects in our everyday life, de Broglie relationship has no significance in everyday
life.

HEISENBERG UNCERTAINTY PRINCIPLE

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 130
 ATOMIC STRUCTURE

Bohr's theory considers an electron as a material particle. Its position and momentum can be determined with
accuracy. But, when an electron is considered in the form of wave as suggested by de-Broglie, it is not possible to
ascertain simultaneously the exact position and velocity of the electron more precisely at a given instant since the
wave is extending throughout a region of space.
In 1927, Werner Heisenberg presented a principle known as Heisenberg uncertainty principle which states as : "It is
impossible to measure simultaneously the exact position and exact momentum of a body as small as an electron."
The uncertainty of measurement of position, x, and the uncertainty of momentum p or mv, are related by
Heisenberg's relationship as : ( p = mv, p = mv)
h h h
x . p > or x . mv > or x.v 
4 4 4 m
where h is Planck's constant.
x v= uncertainty product
For an electron of mass m (9.10 × 10–28 g), the product of uncertainty is quite large.
-27
x . v > 6.624 × 10
4πm
6.624 × 10 -27
>
4 × 3.14 × 9.10 ×10 -28
= 0.57 erg sec per gram approximately
When x = 0, v= and vice-versa.
In the case of bigger particles (having considerable mass), the value of uncertainty product is negligible. If the
position is known quite accurately, i.e., x is very small, vbecomes large and vice-versa.
 In terms of uncertainty in energy E, and uncertainty in time t, this principle is written as,
h
E.t 
4
 Heisenberg replaced the concept of definite orbits by the concept of probability. According to Heisenberg
we can only define the probability of finding electrons around the nucleus.

Ex. Why electron cannot exist inside the nucleus according to Heisenberg's uncertainty principle ?
Sol. Diameter of the atomic nucleus is of the order of 10–15 m
The maximum uncertainty in the position of electron is 10–15 m.
Mass of electron = 9.1 × 10–31 kg.
h
x. p =
4
x × (m.v) = h/4

h 1 6.63 × 10 -34 1
v =  = ×
4  x.m 22 10 × 9.1 × 10 -31
-15
4×
7
v = 5.80 × 1010 ms–1
This value is much higher than the velocity of light and hence not possible.

DE BROGLIE RELATIONSHIP & HEISENBERG'S UNCERTAINTY PRINCIPLE

Ex. The mass of a particle is 1 mg and its velocity is 4.5 × 105 cm per second. What should be the wavelength of this
particle if h = 6.652 × 10–27 erg second.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 131
CHEMISTRY FOR JEE MAIN & ADVANCED

(1) 1.4722 × 10–24 cm (2) 1.4722 × 10–29 cm (3) 1.4722 × 10–32 cm (4) 1.4722 × 10–34 cm
Sol. Given that
m = 1 mg = 1 × 10–3 g
c = 4.5 × 105 cm/sec.
h = 6.652 × 10–27 erg sec.

h 6.652 × 10 -27 6.652 × 10 -29

  = = cm = 1.4722 × 10–29 cm
mc 1× 10 -3 × 4.5 × 10 5 4.5
Ex. Which of the following should be the wavelength of an electron if its mass is 9.1× 10 –31 kg and its velocity is 1/10
of that of light and the value of h is 6.6252× 10–24 joule second?
(1) 2.446 × 10–7 metre (2) 2.246 × 10–9 metre (3) 2.246 × 10–11 metre (4) 2.246 × 10–13 metre
Sol. Given that
m = 9.1 × 10–31 kg
1
c of velocity of light
10
1
or c × 3 × 108 metre/second i.e. 3 × 107 metre/second
10
h = 6.6252 × 10–34 joule second

h 6.6252 × 10 -34 6.6252 × 10 -34

 = =
mc 9.1× 10 -31 × 3 × 10 7 27.3 × 10 -24
or 0.2426 × 10–10 metre
or 2.426 × 10–11 metre

Ex. What should be the momentum (in gram cm per second) of a particle if its De Broglie wavelength is 1 Å and the value
of h is 6.6252 × 10–27 erg second ?
(1) 6.6252 × 10–19 (2) 6.6252 × 10–21 (3) 6.6252 × 10–24 (4) 6.6252 × 10––27
Sol. Given that
= 1 Å = 1 × 10–8 cm
h = 6.6252 × 10–27 erg second

6.6252 × 10 -27
or p= = 6.6252 × 10–19 gram cm/sec.
1× 10 -8

Ex. What should be the mass of the sodium photon if its wavelength is 5894Å, the velocity of light is 3 × 10 8 metre/
second and the value of h is 6.6252 × 10–34 kg m2/sec.?
(1) 3.746 × 10–26 (2) 3.746 × 10–30 (3) 3.746 × 10–34 (4) 3.746 × 10–36
h h
Sol. =  m=
m×c c
(= 5894Å = 5894 × 10–10 m)

6.652 × 10 -34 6.652

m= -8 -10 or
× 10 -32 = 0.0003746 × 10–32
3 × 10 × 5894 × 10 17682
or 3.746 × 10–36 kg

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 132
 ATOMIC STRUCTURE

Ex. What should be the uncertainty in the velocity of an electron if the uncertainty in its position is 0.005 nm, the mass
of electron is 9.109 × 10–31 kg and the value of h is 6.6252 × 10–34 joule/second?
(1) 2.316 × 105 (2) 1.158 × 107 (3) 2.316 × 109 (4) 2.316 × 1011
Sol. Uncertainty in position (x) = 0.005 nm = 0.005 × 10–9 m
= 5 × 10–12 m
Mass of electron (m) = 9.109 × 10–31 kg.
-34
h 6.6252 × 10
 v = = m/sec.
4 m  x 4 × 3.14 × 5 × 10 -12 × 9.109 × 10 -31

6.6252 × 10 -34
or v =
4 × 3.14 × 5 × 9.109 × 10 -43
 v = 1.15816 × 107 m/sec.

Ex. What should be the uncertainty in velocity of a particle of 1 kg mass if uncertainty in position is 1Å and the value
of h is 6.6252 × 10–34 Joule sec.?
(1) 1.055 × 10–22 (2) 1.055 × 1022 (3) 5.25 × 10–25 (4) 1.055 × 1024
Sol. Given that
x = 1Å = 1 × 10–10 m
m = 1 kg
h = 6.6252 × 10–34 Joule sec.

h 6.6252 × 10 -34
v  =
4   m  x 4 × 3.14 × 1× 10 -10

6.6252 × 10 -34
or Δv = m/sec.
12.56 × 10 -10
= 0.52525 × 10–24 m/sec.
= 5.25 × 10–25 m/sec.

Ex. What should be the uncertainty in position if uncertainty in momentum is 1 × 10 –2 g cm/sec. and value of h is
6.6252 × 10–34 Joule sec. ?
(1) 1.054 × 10–22 m (2) 1.054 × 10–25 m (3) 0.525 × 10–27 m (4) 1.054 × 10–32 m
Sol. Given that
p = 1 × 10–2 g cm/sec. = 1 × 10–7 kg m/sec.
h = 6.6252 × 10–34 Joule sec.

h h
x × p = x =
4 4   p

6.6252 ×10 -34

or Δx = = 0.525 × 10–27 m
4 × 3.14 ×10 -7

Ex. A ball weighs 25 g moves with a velocity of 6.6 × 104 cm/sec then find out the De Broglie associated with it.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 133
CHEMISTRY FOR JEE MAIN & ADVANCED

h
Sol.  = 
mv

6.6 ×10-34 ×107 10 3 8

= ergsec = 1 
25 × 6.6 ×10 4 cm / sec 25

= 0.04 × 10–38 × 107

= 0.04 × 10–31 cm
= 4 × 10–33 cm
Ex. Which of the following has least De Broglie if they have same velocity.
1. e– 2. p 3. CO2 4. SO2

h
Sol.  =
mv
mass of SO2 is greater than the mass of e– , p, CO2
= h constant
= v Same
least will be SO2

1
 
m

Ex. If uncertainty in position of an e– is same as the x of He atom. If p of e– is 32 ×105 then find p in He atom.

h
Sol. x × p =
4
Since x is same for both.
therefore p will be same by

h
Δx e × Δp e ³
4π Pe
 1
h PHe
Δx (He) × ΔPHe ³
4π

 Pe  PHe

32 × 105 = 32 × 105
PHe= 32 × 105

Ex. Calculate the uncertainty in the position of a particle when the uncertainty in momentum is
(a) 1 × 10–3g cm sec–1 (b) Zero.
Sol. Given
p = 1 × 10–3 g cm sec–1
h = 6.62 × 10–27 erg sec.
= 3.142
According to uncertainty principle

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 134
 ATOMIC STRUCTURE

h
x. p 
4

h 1
So, x  .
4  p

6 .62  10 2 7 1
  3
4  3.142 10
= 0.527 × 10–24 cm
(b) When the value of p = 0, the value of x will be infinity.
Ex. The uncertainty in position and velocity of a particle are 10–10 m and 5.27 × 10–24 ms–1 respectively. Calculate
the mass of the particle (h = 6.625 × 10–34 Joule Sec.)
Sol. According to Heisenberg's uncertainty principle,
h h
x.m v  or m=
4 4πΔx.Δv

6.625 × 10 -34
=
4 × 3.143 × 10 -10 × 5.27 × 10 -24
= 0.099 kg
Ex. Calculate the uncertainty in velocity of a cricket ball of mass 150 g if the uncertainty in its position is of the
order of 1Å (h= 6.6 × 10–34 kg m2 s–1).
h
Sol. x . m v =
4
h
       v =
4πΔx.m
6.6 × 10 -34
=
4 × 3.143 × 10 -10 × 0.150
= 3.499 × 10–24 ms–1

Orbital
An orbital may be defined as the region of space around the nucleus where the probability of finding an electron is
maximum (90% to 95%)
Orbitals do not define a definite path for the electron, rather they define only the probability of the electron being in
various regions of space around the nucles.

less dots represent Maximum dots represent

low probability of high probability of
finding an electron finding an electron

Difference Between Orbit and Orbitals

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 135
CHEMISTRY FOR JEE MAIN & ADVANCED

S. No. Orbit Orbitals

It is well defined circular path followed by It is the region of space around the nucleus where
1 revolving electrons around the nucleus electron is most likely to be found
It represents planar motion of electron It represents 3 dimensional motion of an electron around
2 the nucleus.

The maximum no. of electron in an orbits is 2n

2 Orbitals can not accomodate more than
3 2 electrons.
where n stands for no. of orbit.
Orbits are circular in shape. Orbitals have different shape e.g. s-orbital is spherical,
4
p - orbital is dumb- bell shaped.
Orbit are non directional in character. Orbitals (except s-orbital) have directional character.
5 Hence, they cannot explain shape of molecules Hence, they can account for the shape of molecules.
Concept of well defined orbit is against Concept of orbitals is in accordance with
6 Heisenberg’s uncentainty principle. Heisenberg’s principle

Shape of The Orbitals

Shape of the orbitals are related to the solutions of Schrodinger wave equation, and gives the space in which the
probability of finding an electron is maximum.
s- Orbital : Shape  spherical
Y
Z

s- orbital is non directional and it is closest to the nucleus, having lowest energy.
s-orbital can accomodate maximum no. of two electrons.

p-Orbital : Shape  dumb bell

Dumb bell shape consists of two lobes which are separated by a region of zero probability called node.
Nodal Plane – The imaginary plane where probability of finding an electron is zero.

Y Y
Y Z
Z Z

X
X X Px
Px Py

nodal plane – yz nodal plane – xy

nodal plane – xz

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 136
 ATOMIC STRUCTURE

p - subshell can accomodate maximum of six electrons.

d - Orbital : Shape  double dumb bell

Z
Y
Z

45°
X Y

dxy dyz
Z
Y
Z
Y

ring
X X X

d x -y
2 2
dz
dxz
2

d - subshell can accomodate maximum of 10 electrons.

f - Orbital : Shape  leaf like or Complex

f - orbital can accomodate maximum no. of 14 electrons.

Quantum Numbers
The set of four numbers required to define the possible location of an electron in an atom are called quantum
numbers. The first three have been derived from Schrodinger wave equation.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 137
CHEMISTRY FOR JEE MAIN & ADVANCED

(i) Principal Quantum Number (n) : (Proposed by Bohr)

It describes the size of the electron wave and the total energy of the electron. It has integral values 1, 2, 3, 4 ...., etc.,
and is denoted by K, L, M, N. ..., etc.
 Number of subshell present in nth shell = n
n subshell
1 s
2 s, p
3 s, p, d
4 s, p, d, f
 Number of orbitals present in nth shell = n2 .
 The maximum number of electrons which can be present in a principal energy shell is equal to 2n2.
No energy shell in the atoms of known elements possesses more than 32 electrons.
nh
 Angular momentum of any orbit =
2
(ii) Azimuthal Quantum Number () : (Proposed by Sommerfield)
It describes the shape of electron cloud and the number of subshells in a shell.
 It can have values from 0 to (n – 1). Each value of  represents a subshell.
 value of  subshell
0 s
1 p
2 d
3 f

 Number of orbitals in a subshell = 2 + 1

 Maximum number of electrons in particular subshell = 2 × (2 + 1)

h  h 
 Orbital angular momentum L = (1) =  (  1)   2  
2  

h
i.e. Orbital angular momentum of s orbital = 0, Orbital angular momentum of p orbital = 2 ,
2

h
Orbital angular momentum of d orbital = 3
2
(iii) Magnetic Quantum Number (m) : (Proposed by Linde)
It describes the orientations of the subshells. It can have values from – to +  including zero, i.e., total (2 + 1)
values. Each value corresponds to an orbital. s-subshell has one orbital, p-subshell three orbitals (p x, py and pz),
d-subshell five orbitals (d xy , d yz , d zx , d x 2  y 2 , dz 2 ) and f-subshell has seven orbitals. The total number of orbitals
present in a main energy level is ‘n2’.

(iv) Spin Quantum Number (s) : (Proposed by Samuel Goudsmit & Uhlenbeck)
It describes the spin of the electron. It has values +1/2 and –1/2. signifies clockwise spinning and anticlockwise
spinning.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 138
 ATOMIC STRUCTURE

eh
(i) Spin magnetic moment s = s( s  1) or  = n (n  2) B.M. (n = no. of unpaired electrons)
2 mc

h
(ii) It represents the value of spin angular momentum which is equal to s( s  1)
2

1
(iii) Maximum spin of atom = x No. of unpaired electron.
2

Rules for Filling of Orbitals

1. Aufbau Principle
Aufbau is a German word and its meaning 'Building up'
Aufbau principle gives a sequence in which various subshell are filled up depending on the relative order of the
Energies of various subshell.
 Principle :The subshell with minimum energy is filled up first and when this subshell obtained maximum
quota of electrons then the next subshell of higher energy starts filling.
 The sequence in which various subshell are filled is the following.

1s 2s 3s 4s 5s 6s 7s

2p 3p 4p 5p 6p 7p

3d 4d 5d 6d

4f 5f

1s2, 2s2, 2p6, 3s2, 3p6, 4s2, 3d10, 4p6, 5s2, 4d10, 5p6, 6s2, 4f14, 5d10, 6p6, 7s2, 5f14, 6d10, 7p6

2. (n +) Rule
According to it the sequence in which various subshell are filled up can also be determined with the help of
( n +) value for a given subshell.

PRINCIPLE OF (n +) RULE

The subshell with lowest( n +) value is filled up first, when two or more subshell have same (n+) value then the
subshell with lowest value of n is filled up first.

Sub Shell n  n+

1s 1 0 1
2s 2 0 2
2p 2 1 3 

(1)

3s 3 0 3  (2)

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 139
CHEMISTRY FOR JEE MAIN & ADVANCED

3p 3 1 4 

(1)

4s 4 0 4  (2)
3d 3 2 5  (1)

4p 4 1 5  (2)
5s 5 0 5  (3)
4d 4 2 6  (1)

5p 5 1 6  (2)
6s 6 0 6  (3)

EDUBULL KEY POINTS

For H atom the energy of orbital depends only on the value of n.
i.e. 1s < 2s = 2p < 3s = 3p = 3d < 4s = 4p = 4d = 4f..................
3. Pauli's Exclusion Principle
In 1925 Pauli stated that no two electron in an atom can have same values of all four quantum numbers.

 An orbital can accomodates maximum 2 electrons with opposite spin.

4. Hund's Maximum Multiplicity Rule

(Multiplicity : Many of the same kind)
 According to Hund's rule electrons are distributed among the orbitals of subshell in such a way as to give
maximum number of unpaired electron with parallel spin. i.e. in a subshell pairing of electron will not start
until and unless all the orbitals of that subshell will get one electron each with same spin.

SPIN MULTIPLICITY
It is given by 2S + 1 where S is the total spin.

(a) (b)

1 1
For (a), S =   =0
2 2
Spin multiplicity = 2S + 1 = 0 + 1 = 1 (singlet)
1 1
For (b), S =   =1
2 2
Spin multiplicity = 2S + 1 = 2 × 1 + 1 = 3 (triplet)

Ex. Find out the angular momentum of an electron in

(a) 4s orbital (b) 3p orbital (c) 4th orbital

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 140
 ATOMIC STRUCTURE

h
Sol. Angular momentum in an orbital = l l  1 
2
(a)  = 0 for 4s orbital, hence orbital angular momentum = 0
(b)  = 1 for 3p orbital
h h
 Angular momentum =
2
1  1   1 
2
(c) Angular momentum in 4th orbit
nh 4 h 2 h
=  
2 2 

Ex. Given below are the sets of quantum numbers for given orbitals. Name these orbitals.
(i) n = 4,  = 2, m = 0 (ii) n = 3,  = 1, m = ±1
(iii) n = 4,  = 0, m = 0 (iv) n = 3,  = 2, m = ±2
Sol. (i) 4dz2 (ii) 3px or 3py
(iii) 4s (iv) 3d x2  y2 or 3dxy
ELECTRONIC CONFIGURATION OF ELEMENTS
Based on the rules, we can easily determine the electronic configurations of most element. We just need to know
the atomic number of an element, the order in which orbitals are to be filled and the maximum number of electrons
in a shell, sub-shell or orbital. The configurtion so obtained can be represented in two ways. As an illustration,
let us consider fluorine (Z = 9) :

F(Z = 9) = 1s2, 2s2, 2px2, 2py2, 2pz1 or

1s 2s 2px 2py 2pz
Importance of knowing the exact electronic configuration of an element lies in the fact that the chemical properties
of an element are dependent on the behaviour and relative arrangement of its electrons.
Electronic configurations of heavier elements (beyond Z = 56) deviate a little from the order mentioned previously.
These are listed below :
Lanthanides La (Z = 57) : [Xe]6s25d1 (not 4f1)
Ce (Z = 58) : [Xe]6s25d14f1
Pr (Z = 59) : [Xe]6s25d14f2
Actinides Ac (Z = 89) : [Rn]7s26d1 (not 5f1)
Th (Z = 90) : [Rn]7s26d15f1
Pa (Z = 91) : [Rn]7s26d15f2
Beyond Z = 103 Z = 104 : [Rn]5f146d27s2
Z = 105 : [Rn]5f146d37s2
Z = 106 : [Rn]5f146d47s2
Z = 112 : [Rn]5f146d107s2

Ex. Write the electronic configuration and find the no. of unpaired electrons as well as total spin for the following
atoms
(1) 6
C
(2) 8
O
(3) 15
P
(4) 21
Sc

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 141
CHEMISTRY FOR JEE MAIN & ADVANCED

(5) 26
Fe
(6) 10
Ne
Sol. (i) 6
C  1s2, 2s2, 2p2

No. of unpaired electrons  2.

2 2
Total spin = or
2 2

(ii) 8
O  1s2, 2s2, 2p4

1s 2s 2p
 No. of unpaired electrons = 2

2 2
Total spin = or
2 2
(iii) 15
P 1s2, 2s2, 2p6, 3s2, 3p3

3s 3p
 No. of unpaired electrons = 3

3 3
Total spin = or
2 2

(iv) 21
Sc  1s2, 2s2, 2p6, 3s2, 3p6, 4s2, 3d1

or [Ar] 4s2 3d1

3d 4s
[Ar] 3d 4s1 2

 No. of unpaired electrons = 1

1 1
 Total spin = or
2 2

(v) Fe  1s2, 2s2 2p6, 3s2, 3p6, 4s2 3d6

26

or [Ar] 4s2, 3d6

4s 3d
No. of unpaired electrons = 4

4 4
 Total spin = or
2 2

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 142
 ATOMIC STRUCTURE

(vi) 10
Ne  1s2, 2s2 2p6

No. of unpaired electrons = 0

Total spin = 0

Ex. Write down the four quantum numbers for fifth and sixth electrons of carbon atom.
Sol. 6C : 1s , 2s 2p
2 2 2

1 1
fifth electron : n = 2  = 1 m = – 1 or +1 s=+ or –
2 2

1 1
sixth electron : n=2 =1 m=0 s=+ or –
2 2

Ex. Calculate total spin, magnetic moment for the atoms having at. no. 7, 24 and 36.
Sol. The electronic configuration are
7N : 1s2, 2s2 2p3 unpaired electron = 3
24Cr : 1s2, 2s2 2p6, 3s2 3p6 3d5, 4s1 unpaired electron = 6
36Kr : 1s2, 2s2 2p6, 3s2 3p6 3d10, 4s2 4p6 unpaired electron = 0
 Total spin for an atom = ± 1/2 × no. of unpaired electron
For 7N, it is = ± 3/2 ; For 24Cr, it is = ± 3 ; For 36Kr, it is = 0

Also magnetic moment = n (n  2)

For 7N, it is = 15 ; For 24Cr, it is = 48 ; For 36Kr, it is = 0

EXCEPTIONALCONFIGURATIONS
Stability of Half Filled and Completely Filled Orbitals
Cu has 29 electrons. its expected electronic configuration is 1s2,2s2, 2p6, 3s2, 3p6, 4s2, 3d9.
But a shift of one electron from lower energy 4s orbital to higher energy 3d orbital will make the distribution of
electron symmetrical and hence will impart more stability.
Thus the electronic configuration of Cu is 1s2, 2s2, 2p6, 3s2, 2p6, 4s1, d10
Fully filled and half filled orbital are more stable.
Ex. We know that fully filled and half filled orbital are more stable. Can you write the electronic configuration of
Cr(Z = 24) ?
Sol. Cr (Z = 24)
1s2, 2s2, 2p6, 3s2, 3p6, 4s1, 3d5.
Since half filled orbital is more stable, one 4s electron is shifted to 3d orbital.

Ex. A compound of vanadium has a magnetic moment of 1.73 BM work out the electronic configuration of the vanadium
in the compound.

Sol. Magnetic moment = n n  2 

Where n is number of unpaired electrons

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 143
CHEMISTRY FOR JEE MAIN & ADVANCED

 1.73 = n  n  2  or (1.73)2 = n2 + 2n, n = 1

Vanadium atom must have the unpaired electron and thus its configuration is :
4+ : 1s22s22p63s23p63d1
23V

WAVE MECHANICALMODEL OFATOM Nodes

Schrodinger Wave Equation
General wave equation
y = A sin t
where, y = displacement
A = amplitude
t = time
Developed by schrodinger, this model is based on the particle and wave nature of electron is known as WAVE
MECHANICAL MODEL of atom. The motion of electron around nucleus is round motion and may be considered
to be analogous to the STANDING WAVES, the waves which are generated by plucking the stretched string. The
amplitude of the standing wave is independent of time and is a function of the distance from one fixed end. The
derived eq. by schrodinger is

2  2  2  8 2 m
Schrodinger wave equation     (E  V)  0
x2 y2 z2 h2

where  = Amplitude of e– wave (or wave function)

m = mass of e–
E = Total energy
V = Potential energy

8 2 m
or 2   (E  V)  0
h2

        
where 2 = Laplacian operator =  2    2    z2 
 x   y 

h2
2+ (E – V)  = 0
8 2 m

 h 2 2 
 2   V   = E
 8 m 

H   E

h 2 2
 H  V Hemiltonion operator
8 2 m

SCHRODINGER EQUATION IN CARTESIAN COORDINATE

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 144
 ATOMIC STRUCTURE

Z = rcos

y = rsinsin

x = rsincos

The schrodinger equation can be written in terms of cartesian coordinates

(x, y, z) or in terms of spherical polar coordinates (r, , ). However for most
calculations it is simpler to solve the wave equation in polar coordinates.
When Schrodinger wave equation in polar coordinates is solved for
hydrogen atom the solution obtained can be factorized into 2 separate
parts, one being the function of r and other the function of  and .
 (r, ) = R(r) f (, )
R(r) = Radial function
f (, ) = Angular function

SIGNIFICANCE OF ()
The wave function may be regarded as amplitude of electron wave expressed in terms of coordinates
(x, y, z) or (r, , ). The wave function may have +ve or –ve values depending on the values of coordinates. As such
there is no physical significance of .
SIGNIFICANCE OF ()2
In classical theory of electromagnetic radiation, the square of amplitude is proportional to the intensity of light. A
very similar concept was suggested by MAX BORN in QUANTUM MECHANICS according to which the square
of function  at any point is proportional to the probability of finding an electron at that point 2 is known as
PROBABILITY DENSITY and is always +ve.
The region of space in which there is maximum probability of finding an electron (say 90%) is termed as an orbital.

QUANTUM NUMBERS
In an atom, a large no of orbitals are permissible. These orbitals are designated by a set of 3 numbers known as
QUANTUM NUMBERS (principle, azimuthal, magnetic) which arise as a natural consequence in the solution of
schrondinger wave equation. These quantum numbers describe energies of electron in an atom, information about
shapes and orientation of orbitals. In order to designate the electron an additional quantum number called as SPIN
QUANTUM NUMBER is needed to specify spin of the electron.

GRAPHICAL REPRESENTATION OF 
 = Amplitude of wave
2 = probability density  It gives us probability of finding an electron at a point or per unit volume.

Probability  2  dv

 =  (x, y, z) =  (r, , )
 = R(r) ~ ()
R2 = radial probability density, r = radius

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 145
CHEMISTRY FOR JEE MAIN & ADVANCED

R2 = radial probability density of finding an electron at a distance R from the nucleus in any direction.

R
(i) r

Hyperbola


 1 2r
R(r)1s  2   e 2 where  
 a0  na0

a0 = 0.529 Å n = principal quantum number

3
r
 1 2 
R(r)1 s  2   e a 0
 a0 

R
2

Graph between R2 and r will be same hyperbolic.

r

3

1  1 2 
(ii) R(r)2s    (2   )e 2
2 2  a0 

After reaching 2a0 now curve would start decreasing and again goes up to cut at .

R(r)2s R2(r)2s

2a0
r r
(iii) R(r)3s vs r

R(r)3s  R (r)3s

2

r r

RADIAL NODES : Points at which the probability of finding an electron is zero is known as radial nodes.
No. of radial nodes = n –  – 1
Electron cannot be present at 2a0 distance from nucleus. If we join all 2a0 points 2a0
to form a sphere, we can say that electron cannot be present on surface of sphere, 2a0
2a0

2a0
Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 146
 ATOMIC STRUCTURE

however it may be present inside or outside. At 2a0 distance probability of presence

of electron is zero. Since a sphere is formed radial nodes are also called SPHERICAL
NODES.
Radial nodes are spherical in shape also known as spherical nodes or nodal sphere.

GRAPHS FOR P-ORBITALS

3 2p

1  1 2 
R(r)2p
R(r)2 p   a  e
2

2 6 0

r
3p
R(r)3p R2(r)3p

r r

4p 3d
R(r)4p R(r)3d

r r
RADIAL PROBABLITY DISTRIbUTION FUNCTION
dr is very very less dr
4 3 3
volume = π((r + dr) - r ) shell
3
4 r
= π((r 3 + 3r 2 dr + 3r dr 2 + dr 3 - r 3 )
3
dr2 and dr3 are neglected
4
= (3r 2 dr) = 4r2dr
3
Radial probability in given shell = 4r2drR2
Radial probability function = 4r2R2
The probability of finding an electron at a distance r from the nucleus in all the direction is called radial probability
function (RPF).

GRAPHS BETWEEN R PFAND r

 1s
R (r)1s = Ce 2
4p2R2r2


42R2r2 = 4r2C2 e 2


2r
r(max)
a0
= C'r2 e
2r

a0
4 R r = C'r e
2 2 2 2

For s-orbital, R and R2 at nucleus is not zero but probability is almost equal to zero because of very small size.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 147
CHEMISTRY FOR JEE MAIN & ADVANCED

R2 dv  0 as dv  0 for nucleus
rmax  distance at which the probability of finding an electron is max.
3/ 2 r
1 
P  4 R r 2 2 R1 s  2   e a0
1s
 a0 
now differentiate eq. by putting value of R1s
3 2 r
1  a0
P = 4r2 × 4   e
 a0 
2 r 2 r 2 r
a dP
P = Cr 2 e 0  C(2 r e a 0  r 2 e a 0 )
dr
2 r
dP a0  2r 
 Cr e  2    0
dr  a0 

 r  a 0 Maxima

Peaks of the curves are increasing

Here 1st peak is smaller than 2nd and 2nd smaller than 3rd.

ANTINODE POINT - Point at which probability of finding an electron is max.

COMPARISON OF rmax. & ravg FOR DIFFERENT ORBITALS

Note : ravg is always greater than rmax

Case I - when  is same but n is different.

As value of n increases rmax increases.

Peaks are numbered according to value of (n – ).

As n increases ravg increases if ravg is more, electron will be more away from nucleus.

PENETRATION POWER : Penetration power of orbital is a measure of its closeness to the nucleus.
1s > 2s > 3s
Case II - When 'n' is same but '' different.
As value of '' increases, ravg increases

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 148
 ATOMIC STRUCTURE

As value of '' increases, rmax decreases

  rmax. 
  ravg. 
Closeness to nucleus - 3s > 3p > 3d

ENERGY COMPARISON
For energy comparison Aufbau rule should be used. But for hydrogen atom, subshell belonging to particular
shell possess equal energy.
2p = 2s, 3s = 3p = 3d

ANGULAR FUNCTION
It gives us an idea about the shape, orientation of an orbital
Ex.  = 1  m = –1, 0, +1

Py Pz

Px

For s orbital, angular part is independent of  and .

 There would be zero angular nodes for s-orbital.
No.of angular nodes for any orbital = l

SHAPE OFANGULAR NODE

For Px :

Angular Node
or
Nodal plane

Angular node or nodal plane

 Px  yz plane
Py  xz plane
Pz  xy plane
For dxy :

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 149
CHEMISTRY FOR JEE MAIN & ADVANCED
y

 dxy  xz and yz
dyz  xz and xy
dzx  xy and yz

45°

d x 2 – y2

We cannot predict the designation of angular nodes but can be said that at an angle of 45° with axis.
Nuclear Chemistry
Spontaneous disintegration of nuclei due to emission of radiations like , ,  is called radioactivity.
Radioactivity is a nuclei phenomenon.
Radioactivity is not depend on external conditions like temperature, pressure etc.
Radioactivity of a substance is independent to its physical state.
x(s), x(l), x(g), (x)+(g), (x)–(g) in all form, x is radioactive.
CO2, 146C(s), 146C(g) is radioactive.
14

Radiations
 : 2He4 ( 42He2+) (nucleus of He-atom)
or – : –1e0 (fast moving electron emitted from nucleus)
 : 00
(electromagnetic radiation (waves) of high frequency)
speed : >>
penetrating power : >>
ionisation power : >>

Emission of rays Usual condition Effect Process representation /

example

n
1.  Z > 83 p
ratio increases Z
XA  Z– 2X’A – 4 + 2He4

92
U238  90Th234 + 2He4

n n
2.  If p ratio is high. p
ratio decreases Z
YA  Z+ 1Y’A – 4 + –1e0

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 150
 ATOMIC STRUCTURE

n 6
Ex. C12 (stable) p = C14  7N14 + –1e0
6 6 6

n 8 n 8 n 7
C14 (radioactive) p = (high) p =6 p =7
6 6

n 13
Ex. Na24 (radioactive) p = (high) n1  1p1 + –1e0 (from nucleus)
11 11 0

n 12
Na23 (stable) p =
11 11

n 11 n
Na22 p = ( ratio low)
11 11 p

3.  If nucleus energy nucleus energy 43

Tc99  43Tc99 + 
level is high level decreases high low
nucleus nucleus
energy energy
(metastable)

n n
4. (a) Positron emission If p ratio is low p
ratio increases Z
YA  Z – 1Y´A + +1e0

(+1e0) 11
Na22  10Ne22 + +1e0
1
p1  0n1 + +1e0 (from nucleus)

n n
(b) Electron capture If p ratio is low p
ratio increases ZX´A + 1e0  Z – 1X´´A
K  shell

(EC) or K-shell 80
Hg197 + –1e0  79Au197
electron capture
1
1p  1e 0  0 x1
(K  shell )

X-ray emission occurs

K-shell electron capture

L K +

Nuclear Stability Belt

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 151
CHEMISTRY FOR JEE MAIN & ADVANCED
120 bond
100 high n/p ratio
stable
80 low n/p ratio
No. of n
60 n/p ratio is 1
40
20
0 20 40 60 80 100
No. of p

-Emission

No. of n
n

0
n1  1p1 + –1e0

Z (Z + 1) Z (Z + 1)
No. of p

 Z upto 20 : nuclei stable with n/p ratio nearly 1 : 1

 Z > 20 : n/p ratio increases with Z in stable nuclie region.
 More number of neutrons are required to reduce repulsion between protons.
 83
Bi209 : Stable with largest n/p ratio

n 1.52
=
p 1

Even - Odd Rule : (Out of syllabus)

no. of n no. of p no. of stable nucleic
even even 155 (max)
even odd 55
odd even 50
odd odd 5 (min)

* Expected pairing of nucleus

Magic Numbers
Nuclei in which nucleons have magic no. (2, 8, 20, 28, 50 ....) are more stable.
Ex. 2
He4 , 8O16

Group Displacement Law : (Given by Soddy and Fajan)

 When 1 emission takes place from a nuclie, new formed nuclie occupy two position left in periodic table.

 When 1 emission takes place from a nuclie, new formed nuclie occupy one position right in periodic table.

Due to emission of 1 particle; isobars are formed.

Due to emission of 1 particle; isodiaphers are formed.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 152
 ATOMIC STRUCTURE

Due to emission of 1 and 2 ; isotopes are formed.

Isotopes : same number of proton eg. 6C14 and 6C12

Isobars : same mass number eg. 6C14 and 7N14
Isotones : same number of neutron eg. 2He4 and 1H3

Isodiaphers : Same (n – p) difference

Ex. 9F19 and 19K39 ; (n – p) = 10

Isosters : Same number of atoms and electrons

Ex. N2 and CO
N2O and CO2

Artifical Nuclear Reaction

 specific nuclei + stricking particle  New nuclei + emitted particle

Ex. 1. (, p type) 7

N14 + 2
He4  8
O17 + 1
p1 (or 1H1)

(s.p.) (e.p.)

2. (n,  type) 11
N23 + 1
n0  11
Na24 + 

3. (D,p type) 13
Al27 + 1
H2  13
Al28 + 1
H1

4. (p,  type) 3
Li7 + 1
H1  2
He4 + 2
He4

Nuclear Fission and Nuclear Fusion

In both processes, large amount of heat evolved due to conversion of some mass into energy.
Nuclear Fission : Is a process where heavy nuclei splits into large nuclei.

92
U235 + 0n1  92
U*236

Ex. atom bomb is based on fission.

Nuclear Fusion
Is a process where light nuclei fused together to form heavy nuclei.
1
H2 + 1H3  2He4 + 0n1
1
H2 + 1H2  2
He4
Hydrogen bomb is based on fusion. Very high temperature is required in this process.

For Objective Questions

Total time (T) = no. of halves (n) × Half life (t1/2)

T  n  t1/ 2

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 153
CHEMISTRY FOR JEE MAIN & ADVANCED

No. of half life Int. wt. Final weight

1 w w/2
2 w/2 w/4 = w/22
3 w/4 w/8 = w/23

Amount of substance left in n halves (wt / mole) = Initial amount (wt / mole)
2n
Radioactive Disintegration Series
A series of continued disintegrations starting from an unstable nucleus (radioactive elements) and ending at a
stable nucleus, is known as radioactive disintegration series.

Mainly Radioactive Disintegration Series are of Four Type -

(1) Thorium series (4n series) :
23 2 –6,–4 20 8
90
Th (Starting element)  
 82
Pb (last element)

(2) Neptunium series (4n + 1 series):

237 –7,–4 209
93Np (Starting element)  
 83
Bi (last element)

(3) Uranium Series (4n + 2 series) :

23 8 –8,–6 206
U
92 (Starting element)  
 82
Pb (last element)

(4) Actinium Series (4n + 3 series) :

235 –7,–4 207
U
9 2 (Starting element)  
 82
Pb (last element)

* Thorium series (4n series), Uranium Series (4n + 2 series), Actinium Series (4n + 3 series) are naturally series. But
Neptunium series (4n + 1 series) is artificial series because Neptunium–237 is prepared artificial and the only
member of this series found in nature is the stable end product Bi–209.

Ex. 23
Na is the most stable isotope of Na. Find out the process by which 24 can undergo radioactive decay..
11 Na

Sol. n/p ratio of 24Na is 13/11 and thus greater than one. It will therefore decay following -emission.
24 24 0
11 Na  12 Mg
+ 1e

Ex. The number of -particle emitted during the change ca X  b is :

dY

ab  ab  c b  ab

(A) (B) d +  2  + c (C) d +  2  – a (D) d +  2  – c
4      

Sol. c X  b Y + m 4 He
a d 2
+ n 01e
 c = b + 4m ......(i)
and a = d + 2m – n ......(ii)
by (i) & (ii)
 c b
n = d +  2  – a. Ans. (C)
 

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 154
 ATOMIC STRUCTURE

Ex. The decay product of 13 is :

7 N

(A) 13 + 0 (B) 13 + 0
8 O 1e 6 C 1e

(C) 13 + K electron capture (D) 9 + 24 He

6 C 5 Be

13
n
Sol. 7 N
is positron emitter ; p ratio is low.. Ans. (B)

Ex. A radioactive element X has an atomic numbers of 100. It decays directly into an element Y which decays directly
into an element Z. In both processes a charged particle is emitted. Which of the following statement would be true?
(A) Y has an atomic number of 102.
(B) Z has an atomic number of 101.
(C) Z has an atomic number of 97.
(D) Z has an atomic number of 99.
Sol. X and Y can decay one  each or one  each or X-decays, 1 , Y-decays 1  or X-decays 1 or Y-decays 1 . In
either case (a), (b) and (c) cannot be true. Ans. (D)

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 155
CHEMISTRY FOR JEE MAIN & ADVANCED

EDUBULL TIPS & FORMULAS

c
1. Frequency, =


hc
2. Energy/photon, E = h =


1 23 75
Also, E = eV , if  is in Å


3. Electronic energy change during transition, E = E n 2  E n1

n2 > n1, emission spectra if electron jumps from n2 to n1 shell and absorption spectra if electron excites from n1
to n2 shell.

n2h2
4. Radius of nth Bohr orbit of H atom, rn = (where K = 9 × 109)
4  2 me 2 K

n2
r1 for H = 0.529 Å ; rn for H like atom rn = 0.529 × Å
Z

2 KZe 2
5. Velocity of electron in nth Bohr orbit of H atom, v =
nh

Z
v = 2.18 × 108 cm / sec .
n

2  2 mZ2 e 4 K2
6. Energy of electron in nth Bohr orbit of H atom, E =
n2h2
where n = 1, 2, 3..........

Z2
[E = –13.6 × kcal/mole (1 cal = 4.18 J)]
n2
E1 for H = – 21.72 × 10–12 erg = – 13.6 eV, E1 for H like atom = E1 for H × Z2
7. Wavelength emitted during transition in H atom,

1 1 2
1  2  me
4
1 1 
 RH  2  2  = ch 3  2  2  (in C.G.S.)
  n1 n2  n
 1 n 2 

1
8. Photoelectric effect hv = w + mu 2 or hv = I.E. + K.E.
2

9. Possible transitions for a jump from n2 to n1 =  (n 2  n1 )

10. Angular momentum of electron in an orbit = n. (h/2)

11. Angular momentum of electron in an orbital = (nh/2) l  l  1  

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 156
 ATOMIC STRUCTURE

1 
12. Total spin = ±   n  ; where n is no. of unpaired electrons.
2 

13. Magnetic moment of an atom n  n  2  B.M.; where n is no. of unpaired electrons.

14. Nodal planes : Radial nodes = n –  – 1, Angular nodes = 1, Total nodes = (n – )

h h2
15. de Broglie equation :  = 
mu 2  K.E.  m
where  is wavelength, m is mass and u is velocity of particle.

16. Heisenberg uncertainty principle :

h
p.x 
4

h
u.x 
4 m
where p, u and x are uncertainties in momentum, velocity and position respectively. Planck's constant is
h and m is mass of subatomic particle.

Add. 41-42A, Ashok Park Main, New Rohtak Road, New Delhi-110035
+91-9350679141 157