100% found this document useful (1 vote)
53 views

DUST_CATCH TECHNICAL SHEET

The AUTOMECK ADC 1.30 is a tower-mounted dust suppression system with a throw distance of up to 15 meters and adjustable horizontal swing of 330 degrees. It features a super-fine fog spray with droplet sizes ranging from 0.5 to 30 microns, and can cover an area of 4500-5000 square feet. The system operates on a 415V power supply and can be controlled manually, automatically, or remotely.

Uploaded by

ankitkayshap312
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
53 views

DUST_CATCH TECHNICAL SHEET

The AUTOMECK ADC 1.30 is a tower-mounted dust suppression system with a throw distance of up to 15 meters and adjustable horizontal swing of 330 degrees. It features a super-fine fog spray with droplet sizes ranging from 0.5 to 30 microns, and can cover an area of 4500-5000 square feet. The system operates on a 415V power supply and can be controlled manually, automatically, or remotely.

Uploaded by

ankitkayshap312
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Make: AUTOMECK (Dust Catcher)

Model: ADC 1.30


TECHNICAL SHEET

TECHNICAL SPECIFICATIONS:

 Equipment Type: Tower Mounted Dust Suppression System.

 Throw Distance: Up to 10-15 Meters (Max.)

 Horizontal Swing: Up to 330 degrees- adjustable (Automatic swing)

 Vertical Tilt: +40-(-10) degrees (Manual)

 Fan Blade: Aluminium Alloy/ PPG

 Fan Motor control:- Drive (Speed can be controlled)

 Pump type: Feeding type


 Water Inlet: ¼ Pneumatic pipe – 5 meters

 Water type: Normal Clean water supply

 Water discharge: 1-2 lpm (flow can be adjusted)

 Coverage area: 4500-5000 sq feet

 Droplet size: 0.5-30 microns

 Nozzle: Special Design of water dispense ( without any Nozzles.)

 Valve: Electrical valve (Water flow can be controlled)

 Spray: Super-fine fog.

 Filtration: Y-Stainer (SS)

 Power:- 900 watts (Approx)

 Panel: Metal sheet with powder coated

 Power supply: 415V, 50Hz, 3Phase, 4wire (Cable size: 6 sq mm 4 core Copper)

 Panel: IP55 with cooling fan arrangement

 Operation: Manually/ Automatic with Remote and also from Control Room (DCS)

You might also like