0900766b816e490b
0900766b816e490b
com/gb/products/2903370
Pre-assembled relay module with push-in connection, consisting of: relay base with ejector and power contact
relay. Contact type: 1 PDT. Input voltage: 24 V DC
GTIN
GTIN 4046356731942
Weight per Piece (excluding packing) 24.200 g
Custom tariff number 85364110
Country of origin China
Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area
Dimensions
Width 6.2 mm
Height 93 mm
Depth 78 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Coil side
Nominal input voltage UN 24 V DC
Input voltage range in reference to UN see diagram
Typical input current at UN 9 mA
05/10/2019 Page 1 / 13
https://www.phoenixcontact.com/gb/products/2903370
Contact side
Contact type 1 PDT
Type of switch contact Single contact
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Min. switching current 10 mA (at 12 V)
Maximum inrush current 10 A (4 s)
Limiting continuous current 6A
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity 2 A (24 V (DC13))
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection data 1
Connection name Input side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16
Connection data 2
Connection name Output side
Connection method Push-in connection
Stripping length 8 mm
05/10/2019 Page 2 / 13
https://www.phoenixcontact.com/gb/products/2903370
General
Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20 (Relay base)
RT III (Relay)
Mechanical service life 7
approx. 2x 10 cycles
Service life, electrical see diagram
Mounting position any
Assembly instructions In rows with zero spacing
Drawings
05/10/2019 Page 3 / 13
https://www.phoenixcontact.com/gb/products/2903370
11
A2- A1+
DC coils
Diagram Diagram
0,9
0,8
Reduction factor
0,7
0,6
0,5
0,4
0,3
1 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2
COS j
Interrupting rating
Service life reduction factor
Diagram
Cycles
6
10
1
5
10
4
10
0 2 4 6 8
Switching current [A]
05/10/2019 Page 4 / 13
https://www.phoenixcontact.com/gb/products/2903370
Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC
RIF-0... relay base, for miniature power relay with 1 PDT or solid-state relays of the same design, push-in connection,
for mounting on NS 35/7,5
Classifications
eCl@ss
ETIM
UNSPSC
Approvals
Approvals
05/10/2019 Page 5 / 13
https://www.phoenixcontact.com/gb/products/2903370
Approvals
Ex Approvals
Approval details
DNV GL
http://exchange.dnv.com/tari/ TAA000018V
PRS
http://www.prs.pl/ TE/2108/880590/16
LR
http://www.lr.org/en 15/20011
RU C-
EAC
DE.A*30.B.01082
Accessories
Accessories
End block
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Insulating sleeve
05/10/2019 Page 6 / 13
https://www.phoenixcontact.com/gb/products/2903370
05/10/2019 Page 7 / 13
https://www.phoenixcontact.com/gb/products/2903370
Jumper
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red
05/10/2019 Page 8 / 13
https://www.phoenixcontact.com/gb/products/2903370
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
05/10/2019 Page 9 / 13
https://www.phoenixcontact.com/gb/products/2903370
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue
05/10/2019 Page 10 / 13
https://www.phoenixcontact.com/gb/products/2903370
Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: gray
Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: gray
Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: gray
05/10/2019 Page 11 / 13
https://www.phoenixcontact.com/gb/products/2903370
Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: gray
Marker carriers
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 5.6 x 10.5 mm
05/10/2019 Page 12 / 13
https://www.phoenixcontact.com/gb/products/2903370
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Spare parts
Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC
RIF-0... relay base, for miniature power relay with 1 PDT or solid-state relays of the same design, push-in connection,
for mounting on NS 35/7,5
05/10/2019 Page 13 / 13