Connector Table - MJ6101

CN1 (FINISHER CONNECTION) wire color CN7 wire color

1 P EDGE WHITE 1 5VC WHITE
2 GND BLACK 2 SK1-LED S7-1 BLACK
3 RXD BLACK 3 N.C. (led pcb) n.a.
4 GND BLACK 4 5VC WHITE
5 TXD BLACK 5 SK2-LED BLACK
6 P5V BLACK
7 MT1-STEP BLACK
8 MT1-CUR0 BLACK CN8 wire color
9 MT1-DIR BLACK 1 5VC WHITE
10 P24V BLACK 2 HRHP S3 BLACK
11 GND BLACK 3 GND BLACK
12 P24V BLACK
13 RES# (N.C.) n.a.
14 NMI# (N.C.) n.a. CN9 wire color
15 E10T-0 (N.C.) n.a. 1 HRMT-#B BLACK
2 HRMT-B M2 BROWN
3 HRMT-A YELLOW
CN2 wire color 4 HRMT-#A ORANGE
1 PMT-F M3 RED
2 PMT-R BLACK
CN10 wire color
1 5VC S8-1 YELLOW
CN3 wire color 2 TR-LED (led pcb) YELLOW
1 5VC YELLOW 3 P5V YELLOW
2 PHP1 S4 YELLOW 4 OPN S1 YELLOW
3 GND YELLOW 5 GND YELLOW
4 5VC BLUE 6 5VC BLUE
5 PHP2 S5 BLUE 7 VRHP S2 BLUE
6 GND BLUE 8 GND BLUE
9 VRMT-#B YELLOW
10 VRMT-B YELLOW
CN4 wire color 11 VRMT-A M1 YELLOW
1 5VC WHITE 12 VRMT-#A YELLOW
2 RS1-LED BLACK
3 RS2-LED BLACK
4 RS3-LED S6-1 BLACK CN11 wire color
5 RS4-LED (led pcb) BLACK 1 GND S8-2 WHITE
6 5VC WHITE 2 P5V (sensor BLACK
7 FP-LED BLACK 3 AN-TR pcb) BLACK
4 P24V BLACK
5 N.C. n.a.
CN5 wire color 6 MT1-#B BLACK
1 P24V WHITE 7 MT1-B M4 BLACK
2 P5V BLACK 8 MT1-A BLACK
3 AN-RS1 BLACK 9 MT1-#A WHITE
4 AN-RS2 BLACK
5 AN-RS3 BLACK
6 AN-RS4 S6-2 BLACK
7 GND (sensor BLACK
8 GND pcb) WHITE
9 P5V BLACK
10 AN-FP BLACK
11 P24V BLACK

CN6 wire color

1 GND WHITE
2 P5V BLACK
3 AN-SK1 BLACK
4 P24V S7-2 BLACK
5 GND (sensor WHITE
6 P5V pcb) BLACK
7 AN-SK2 BLACK
8 P24V BLACK
MJ-6101 Hole Punch Unit
2.4 Symbols and Functions of Various Component

The Column <P-I> shows the page and item number in the parts list.

1) Motors

Symbol Name Function P- I Fin. PCB Conn.

M1 Skew Adjustment Motor Adjusts the punch hole position according to the <P1 I19> CN10 pins 9-12
skew of the paper.
M2 Sideways Adjustment Motor Adjusts the punch hole position according to the <P1 I19> CN9 pins 1-4
sideways deviation of the paper.
M3 Punch Motor Drives the punch head to punch holes in the <P3 I17> CN2 pins 1 and 2
paper.
M4 Transport Motor Transports the paper to the Finisher. <P1 I1> CN11 pins 6-9

2) Sensors

Symbol Name Function P- I Fin. PCB Conn.

S1 Front Cover Sensor Detects opening/closing of the front cover. <P1 I107> CN10 p3-P5V, p4-output, p5-GND
S2 Skew Home Position Sensor Detects the home position of the punching unit <P1 I107> CN10 p6-5VC, p7-output, p8-GND
when skew is adjusted.
S3 Sideways Deviation Home Detects the home position of the punching unit <P1 I107> CN8 p1-5VC, p2-output, p3-GND
Position Sensor when sideways is adjusted.
S4 Punch Home Position Sensor Detects the home position of the punch head. <P3 I105> CN3 p1-5VC, p2-output, p3-GND
S5 Punch Sensor Detects the timing for braking the punch motor. <P3 I105> CN3 p4-5VC, p5-output, p6-GND
S6-1 Paper Position Sensor (LED) Detects leading/side/trailing edge of the paper. <P3 I10>* CN4 p1-5VC, p2-RS1-LED, p3-
(Light emitting part) RS1-LED, p4-RS1-LED, p5-RS1-
LED
<P3 I23>* CN4 p6-5VC, p7-FP-LED
S6-2 Paper Position Sensor (SEN) Detects leading/side/trailing edge of the paper. <P3 I13>** CN5 p1-P24V, p2-P5V, p3-AN-
(Light sensing part) RS1, p4-AN-RS2, p5-AN-RS3,
p6-AN-RS4, p7-GND
<P3 I24>** CN5 p8-GND, p9-P5V, p10-AN-
FP, p11-P24V
S7-1 Skew Sensor (LED) Detects the skew of the paper. (Light emitting <P1 I13>*** CN7 p1-5VC, p2-SK1-LED, p3-
part) N.C., p4-5VC, p5-SK2-LED
S7-2 Skew Sensor (SEN) Detects the skew of the paper. (Light sensing <P1 CN6 p1-GND, p2-P5V, p3-AN-
part) I16>**** SK1, p4-P24V, p5-GND, p6-P5V,
p7-AN-SK2, p8-P24V
S8-1 Punch Scrap Full Sensor (LED) Detects the punched scrap full state. (Light <P1 I23> CN10 p1-5VC, p2-TR-LED
emitting part)
S8-2 Punch Scrap Full Sensor (SEN) Detects the punched scrap full state. (Light <P1 I24> CN11 p1-GND, p2-P5V, p3-AN-
sensing part) TR, p4-P24V

3) PC Board

Symbol Name Function P- I Fin. PCB Conn.

HP Hole Punch Control PC Board Controls the Hole punch unit <P2 I14> CN1 pins 1-15 - the connection to
(PNC Board) the finisher.

* The S6-1 has two different sensor boards with different connectors and part numbers.
** The S6-2 has two different sensor boards with different connectors and part numbers.
*** The S7-1 has two boards with different connectors but the same part numbers.
**** The S7-2has two boards with different connectors but the same part numbers.
8. ELECTRIC CIRCUIT

8.1 Harness Diagram

Hole-punch PC board
CN6 CN5

Paper position sensor

1 (white) GND P24V (white) 1
2 (black) P5V P5V (black) 2
S7-2 3 (black) AN-SK1 AN-RS1 (black) 3
Skew sensor 4 (black) P24V AN-RS2 (black) 4 S6-2

(SEN)
AN-RS3 (black) 5
(SEN) 5 (white) GND AN-RS4 (blank) 6
6 (black) P5V GND (blank) 7
S7-2 7 (black) AN-SK2 GND (white) 8
8 (black) P24V P5V (black) 9
AN-FP (black) 10 S6-2
P24V (black) 11

CN7
1 (white) 5VC CN4

Paper position sensor

S7-1 2 (black) SK1-LED 5VC (white) 1
RS1-LED (black) 2
Skew sensor 3 N.C. RS2-LED (black) 3
S6-1
(LED) 4 (white) 5VC RS3-LED (black) 4

(LED)
S7-1 5 (black) SK2-LED RS4-LED (black) 5

5VC (white) 6
FP-LED (black) 7 S6-1
CN8
Sideways deviation 1 (white) 5VC
S3 2 (black) HRHP
home position sensor 3 (black) GND
CN3
5VC (yellow) 1
CN9 PHP1 (yellow) 2 S4
Punch home position
Sideways adjustment 1 (black) HRMT-#B GND (yellow) 3 sensor
M2 2 (brown) HRMT-B
motor 3 (yellow) HRMT-A 5VC (blue) 4
4 (orange) HRMT-#A PHP2 (blue) 5 S5 Punch sensor
GND (blue) 6

CN10 CN2
Punched scrap S8-1 1 (yellow) 5VC PMT-F (red) 1 M3 Punch motor
2 PMT-R (black) 2
full sensor (LED) (yellow) TR-LED

3 (yellow) P5V
Front cover sensor S1 4 (yellow) OPN CN1 CN15 on the finisher pcb.
5 (yellow) GND P EDGE (white) 1 1 P EDGE
GND (black) 2 2 GND
Skew home position 6
7
(blue) P5V RXD (black) 3 3 TXD4
S2 (blue) VRHP
sensor 8 (blue) GND
GND (black)
TXD (black)
4
5
4
5
GND
RXD4
P5V (black) 6 6 P5V
MT1-STEP (black) 7 7 MT1-STEP
9 (yellow) VRMT-#B
MT1-CUR0 (black) 8 8 MT1-CNT0
Skew adjustment motor M1 10 (yellow) VRMT-B
MT1-DIR (black) 9 9 MT1-DIR
11 (yellow) VRMT-A
P24V (black) 10 10 P24V
12 (yellow) VRMT-#A
GND (black) 11 11 GND
P24V (black) 12 12 P24V
RES#(N.C.) 13 13 GND(N.C.)
NMI#(N.C.) 14 14 P24V(N.C.)
E10T-0(N.C.) 15 15 MG6 ON(N.C.)

Finisher P.C.B.
CN11
GND (white) 1
P5V (black) 2 Punched scrap
AN-TR (black) 3 S8-1
P24V (black) 4
full sensor
N.C.

MT1-#B (black) 5
MT1-B (black)
MT1-A (black)
6
7
M4 Transport motor
MT1-#A (white) 8

Fig. 8 - 1

MJ-6101 ELECTRIC CIRCUIT

8-1