Scribd
Upload
6 views

Mini Project 1

The document is a mini project synopsis for an Automatic Transfer Switch (ATS) as part of a Bachelor of Engineering program in Electrical and Electronics Engineering. It outlines the need for an ATS to ensure continuous power supply by automatically switching between power sources during outages, thus preventing potential losses. The document includes sections on introduction, literature survey, methodology, advantages, and applications of the project.

Uploaded by

Sanjana S B
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

Mini Project 1

The document is a mini project synopsis for an Automatic Transfer Switch (ATS) as part of a Bachelor of Engineering program in Electrical and Electronics Engineering. It outlines the need for an ATS to ensure continuous power supply by automatically switching between power sources during outages, thus preventing potential losses. The document includes sections on introduction, literature survey, methodology, advantages, and applications of the project.

Uploaded by

Sanjana S B
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

VISVESVARAYA TECHNOLOGICAL UNIVERSITY

BELAGAVI -590018, KARNATAKA

Mini Project Synopsis


on

“ AUTOMATIC TRANSFER SWITCH”

Bachelor of Engineering

In

Electrical and Electronics Engineering

Project Associates

ALFAZ G HANCHI 2SR22EE003

PAVAN V HULLATTI 2SR22EE009

RAHUL UNKIUNKI 2SR22EE011

YASHVANTH K A 2SR23EE414

Under the Guidence of

Miss.Annapoorna M

Assistant Professor
Dept. of EEE

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

SRI TARALABALU JAGADGURU INSTITUTE OF TECHNOLOGY


RANEBENNUR – 581115

2024- 2025
ABSTRACT

A transfer switch is an electrical device that is capable of alternating and


transferring a load from one source of power supply to another. The basic
function of a transfer switch is to make and break from one source of power
supply to another. It can also serve to isolate power sources in the event of
overvoltage, thus preventing power surge. A manual operation of transfer switch
requires the availability of electrical personnel to operate the switch. Thus, it
cannot be used in some industrial and commercial applications where absence of
power for a certain period of time could have serious implications in terms of life
and financial losses due to loss of production, data storage and products.

In order to eliminate the time delay between changing over from one source to
another, there is therefore a need for an automatic transfer switch. Automatic
transfer switch (ATS) serves as an interface between power sources in order to
maintain a continuous supply of electricity to the load. The switch automatically
senses power failure on the power utility line, sends signal to the microcontroller.
At the moment the microcontroller will process this information and based on
that, the automatic switch disconnects the utility line and then transfer the load
to the next available source, thereby restoring power to the load. The switch will
sensor to monitor the condition of the utility power source.
CONTENTS

CHAPTER TOPICS PAGE NO.

CHAPTER 1 INTRODUCTION 01-02

1.1 Objective of the Project


1.2 Project Overview

CHAPTER 2 LITERATURE SURVEY 03-04

2.1 Problem Statement

CHAPTER 3 METHODOLOGY 05-07

3.1 Block Diagram


3.2 Working Principle

CHAPTER 4 ADVANTAGES & APPLICATIONS 08-09


OF THE PROJECT
4.1 Advantages

4.2 Applications

REFERENCE 10

You might also like