End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

End Semester Exam

Course Code / Name 20CSPW401 – COMPUTER NETWORKS WITH LAB
Regulations 2020
Department CCE
Year / Semester III / V
Course Moderator Dr.K.Pavendan, (SITT23CO01), Assoc. Prof. / CCE / SSIT

Course Outcomes with Knowledge Level

Upon the completion of this course the students will be able to
CO 1
Understand the basic layers and its functions in computer networks. (K2)

CO 2
Demonstrate the performance of a network. (K2)

CO 3
Explain the basics of how data flows from one node to another. (K2)

CO 4
Understand IEEE standards, analyze and design routing algorithms. (K2)

CO 5
Describe the working of various transport and application layer protocols. (K2)

CO 6
Apply the protocols for various functions in the network. (K3)

Distribution of COs (Percentage wise)

Exam / CO CO1 CO2 CO3 CO4 CO5 CO6
CAT 1 66.67 33.33 ----- ----- ----- -----
CAT 2 ----- 33.33 66.67 ----- ----- -----
CAT 3 ----- ----- ----- 33.33 33.33 33.34
End Semester Exam 16.66 16.66 16.67 16.67 16.67 16.67
Total 83.33 83.33 83.33 83.33 83.33 83.33

Page 1 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

UNIT - I

Unit - I / Part - A / 1 Mark/ MCQ

Sl. K–
Marks
No Questions Leve CO
Split-up
. l
1. Which device is commonly used to connect multiple devices in a 1 K1 CO1
home network?
a) Router b) Switch c) Modem
d) Firewall
2. Which networking device is used to connect multiple networks 1 K1 CO1
and route data between them in a large-scale business network?
a) Switch b) Router c) Firewall d)
Hub
3. What type of cable is commonly used to connect a computer to a 1 K1 CO1
router in a home network?
a) Coaxial cable b) Fiber optic cable c)
Ethernet cable d) HDMI cable
4. Which layer of the OSI model is responsible for routing? 1 K1 CO1
a) Physical b) Data link c) Network d) Transport
5. In digital communications, what does the term "bandwidth" refer 1 K1 CO1
to?
a) The cost of transmission b) The speed of connection c)
The capacity for data transfer d) The length of cables
6. What is the significance of the Transport layer in the OSI model? 1 K2 CO1
a) Manages physical connections b) Frames data packets c)
Ensures reliable data transmission d) Routes packets
7. What role does the application layer play in data 1 K2 CO1
communications?
a) Encrypts data b) Connects to the Internet c) Interfaces
with end-user applications d) Provides physical media
connections
8. Which of the following TCP/IP protocols is used by a diskless 1 K2 CO1
machine to obtain its IP address from a server?
a) RIP b) RARP c) RDP d) ARP
9. Which of the following network device is used for 1 K2 CO1
interconnecting two LANs working on the same protocol?
a) Repeater b) Hub c) Bridge d) None of the mentioned
10. Which of the following is a transport layer protocol? 1 K2 CO1
a) SMTP b) UDP c) ICMP d) SSH

Unit - I / Part - B / 2Marks

Mark
K–
Sl.No s
Questions Leve CO
. Split-
l
up
1. 2 K1 CO1
List the different network criteria.
2. 2 K1 CO1
Define Simplex, Half-duplex and Full-duplex.

Page 2 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

3. 2 K1 CO1
Mention the two types of line configuration.
4. 2 K1 CO1
What is the purpose of the dialog controller?
5. What are all the parameters used to measure network 2 K2 CO1
performance?000
6. 2 K1 CO1
Define Computer Networks.
7. 2 K1 CO1
Can you list the five components of data communication?
8. 2 K2 CO1
Differentiate LAN, WAN and MAN.
9. 2 K1 CO1
What is the similarity between transport layer and data link layer?
10. 2 K2 CO1
In what way can you summarize the purpose of layering?
11. 2 K2 CO1
How do guided media differ from unguided media?
12. Assume 6 devices are arranged in a mesh topology. How many 2 K2 CO1
cables are needed? How many ports are needed for each device?
13. 2 K2 CO1
Why are protocols needed?
14. 2 K2 CO1
What are the two approaches to packet switching?
15. 2 K2 CO1
List the common approaches for switching.
16. In what way would you analyze circuit switched and packet 2 K2 CO1
switched networks?
17. 2 K2 CO1
List out the advantages of star topology.
18. Which layer implements the node to node channel connection in 2 K2 CO1
OSI layered architecture?
19. 2 K2 CO1
Can you discriminate between bandwidth and latency? Justify.
20. 2 K1 CO1
What are the criteria used to evaluate transmission medium?

Unit - I / Part - C / 10 Marks

Sl. Marks K–
No Questions Split-u Leve CO
. p l
1. (i) Explain how to build a network with OSI and TCP/IP K1 CO1
reference models. 5
(ii) Write short notes on Framing 5
2. Draw the OSI network architecture and explain the K1 CO1
functionalities of every layer in detail. 10
3. Briefly explain the different types of packet switching K1 CO1
techniques with suitable networks. Write each of its advantages
and disadvantages. 10
4. Explain the Shielded twisted pair (STP) and Unshielded twisted K2 CO1
pair (UTP). 10
5. Explain in detail about the TCP/IP protocol suite with a neat K2 CO1
diagram? 10
6. What is network topology? Explain the different network K2 CO1
topologies. 10

Page 3 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

7. Formulate and discuss the various types of transmission media, K2 CO1

highlighting their merits and demerits. 10
8. (i) Explain the various network performance parameters in K2 CO1
detail. 5
(ii) Explain the purpose of cladding in an optical fiber. 5
9. Explain two approaches of packet switching and circuit K2 CO1
switching techniques. 10
10. (i) Analyze the advantages of optical fiber over twisted pair and K2 CO1
coaxial cable. 6
(ii) List out the approaches of switching? 4

UNIT - II

Unit - II / Part - A / 1 Mark/ MCQ

Sl. K–
Marks
No Questions Leve CO
Split-up
. l
1. What are the services provided by data link layer 1 K1 CO2
a) Framing b) Flow Control c) Error
Detection and/or Correction d) All of the
mentioned
2. Error detection at the data link layer is achieved by? 1 K1 CO2
a) Bit stuffing b) Cyclic redundancy codes c)
Hamming codes d) Equalization
3. The Stop-And-Wait ARQ, Go-Back-N ARQ, and the Selective 1 K1 CO2
Repeat ARQ are for ______ channels.
a) noiseless b) noisy c) both noiseless and
noisy d) all of the mentioned
4. After the data is sent he stops and waits until he receives the 1 K1 CO2
acknowledgment from the ______
a) Sender b) Receiver c) protocol d) none of the mentioned
5. Range of possible sequence numbers of Go-Back-N Protocol 1 K1 CO2
which is concern of receiver is called the
a) sender sliding window b) pipelining at the sender c)
pipelining at the receiver d) receiver sliding window
6. Match The maximum number of __ that can be sent depends 1 K1 CO2
upon the size of the sending window
a) bits b) packets c) data d) frames
7. What will be th window size if the sequence number is from 0 – 1 K1 CO2
15
a) 4 b) 6 c) 8 d) 10
8. How many frames are sent by selective repeat depending on 1 K1 CO2
frames at sending window
a) one b) two c) three d) multiple
9. Which frames carry user data from the network layer? 1 K1 CO2
a) I-frame b) S-frame c) U-frame
10. Name HDLC 1 K1 CO2
a) Huge-level Data Link Control b) High-level Data Link
Control c) High-layer Data Link Control d) High-level
Device Link Control

Page 4 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

11. Bluetooth is a technology with _______ 1 K2 CO2

a) full duplex links b) half duplex links c) both full
and half duplex links d) None of the above
12. What is the maximum size of an Ethernet frame? 1 K1 CO2
a) 64 bytes b) 128 bytes c) 256 bytes d) 1500 bytes
13. Which is the most widely used LAN Technology? 1 K1 CO2
a) Internet b) Wifi c) Ethernet d) Bluetooth
14. MAC stands for _____ 1 K1 CO2
a) multi access control b) medium adaptive control
c) medium access connection d) media access control
15. What is LAN? 1 K1 CO2
a) List Area Network b) Local Area Node c) Local Adaptive
Network d) Local Area Network
16. Which of the following are components of WLAN? 1 K1 CO2
a) Stations & Basic Service Set b) Extended Service Set c)
Distribution System d) All of the mentioned
17. High speed ethernet works on _________ 1 K2 CO2
a) coaxial cable b) twisted pair cable c) optical fiber d)
unshielded twisted pair cable
18. Ethernet frame consists of ____________ 1 K2 CO2
a) MAC address b) IP address c) Default mask d) Network
address
19. Who reduces the chances of a collision on a transmission 1 K1 CO2
medium?
a) network b) packet c) CSMA d) CDMA
20. CSMA stands for _____. 1 K1 CO2
a) career sense multiple access b) carrier sending multiple
access c) carrier sense multiple access d) carrier sense
media access

Unit - II / Part - B / 2Marks

Mark
K–
Sl.No s
Questions Leve CO
. Split-
l
up
1. 2 K2 CO2
Define Nodes and Links
2. 2 K1 CO2
What is HDLC?
3. 2 K1 CO2
Outline the services provided by the Data link layer
4. 2 K1 CO2
What is flow control and error control?
5. 2 K2 CO2
Infer why the data link layer is subdivided into two sublayers.
6. Suppose the following sequence of bits arrives over a link 2 K2 CO2
1101011111010111110010111110110. Show the resulting frame
after any stuffed bits have been removed. Indicates any errors that
might have been introduced into the frame.
7. 2 K1 CO2
What are the three different configurations supported by HDLC?
8. 2 K2 CO2
Define framing.

Page 5 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

9. 2 K1 CO2
What is meant by bit stuffing? Give an example.
10. 2 K2 CO2
Compare Bit oriented versus Byte oriented protocol.
11. 2 K1 CO2
What do you understand about the CSMA protocol?
12. 2 K2 CO2
Relate persistent CSMA with non-persistent CSMA.
13. Compose your view on why fragmentation is 2 K2 CO2
recommended in a wireless LAN?
14. 2 K2 CO2
Analyze the role of 802.11
15. 2 K2 CO2
Assess the four types of S frames.
16. 2 K2 CO2
Examine the access method used by wireless LAN?
17. 2 K1 CO2
Identify the hidden node problem.
18. 2 K2 CO2
Organize the role of error control?
19. 2 K1 CO2
Show the Ethernet frame format.
20. 2 K1 CO2
Write about the Hubs and switches.

Unit - II / Part - C / 10 Marks

Sl. Marks K–
No Questions Split-u Leve CO
. p l
1. Explain in detail about the point to point protocol (PPP) with a K2 CO2
neat sketch. 10
2. 10 K2 CO2
Analyze the flow and error control in DLC.
3. 10 K2 CO2
Examine the various issues in the Data link layer.
4. What is the need for error detection? Explain with typical K1 CO2
examples. Explain methods used for error detection and error
correction. 10
5. Summarize Cyclic Redundancy Check. Show an example of a K2 CO2
CRC code. 10
6. Explain and solve CRC division using polynomials. 10 K2 CO2
7. Discuss the different ways to address the framing problem. 10 K2 CO2
8. Classify in detail about High-level Data Link Control and the K2 CO2
types of frames. 10
9. Explain in detail about the error detecting techniques K1 CO2
(i) Checksum 5
(ii) Forward error correction 5
10. Analyze the various types of error. Discuss the various types of K2 CO2
detection and correction. 10
11. (i) Explain the physical properties of Ethernet 802.3 with K2 CO2
the necessary diagram of Ethernet transceiver and
adaptor. 5
(ii) Assess and explain the Ethernet frame format. 5
12. Construct the comparison between different wireless K2 CO2
technologies? Enumerate 802.11 protocol stacks in detail. 10

Page 6 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

13. 10 K1 CO2
Analyze the architecture of IEEE 802.11
14. Illustrate the working of CSMA/CD and CSMA/CA protocol. 10 K1 CO2
15. Construct the working principle of Switches, Hub and K1 CO2
Routers. 10
16. Write short notes on: K1 CO2
(i) NAV in CSMA/CA. 5
(II) How does a Bridge come to learn on which port the
various hosts reside? Explain with examples. 5
17. Identify the working principle of Bluetooth and develop a K1 CO2
neat sketch to depict its architecture. 10
18. i)Assess briefly about CSMA. 5 K1 CO2
ii)Write short notes on Bridges. 5
19. Use IEEE 802.3 and IEEE 802.11 to build three differences K2 CO2
between wired and wireless LANs. 10
20. Explain Cyclic Redundancy Check? Suppose we want to K2 CO2
transmit the message 11001001 and protect it from errors
using the CRC polynomial x3 + 1. Use polynomial long
division to determine the message that should be
transmitted. 10

UNIT - III

Unit - III / Part - A / 1 Mark/ MCQ

Sl. K–
Marks
No Questions Leve CO
Split-up
. l
1. ICMP resides in ________. 1 K2 CO3
a) Network address b) Datalink c) Application d) Session
2. Which of the following options is a use of "ICMP protocol"? 1 K2 CO3
a) Error reporting b) Checksum c) Flow control d) None of
the mentioned
3. The function of the router in a network is to ............... 1 K2 CO3
a) forward a packet to all outgoing links
b) forward a packet to the next free outgoing link
c) determine on which out link a packet is to be forwarded
d) determine the packet type
4. In link state routing, after the construction of link state packets 1 K2 CO3
new routes are computed using ..................... ______
a) Bellman Ford algorithm b) DES algorithm c) Dijkstra's
algorithm d) Leaky bucket algorithm
5. Which of the following is/are examples of Classless routing 1 K2 CO3
protocols?
a) RIPv2 b) OSPF c) IS-IS d) All of the above mentioned
6. Which of the following is/are examples of Classful routing 1 K2 CO3
protocols?
a) RIPv1 b) OSPF c) IS-IS d) All of the above mentioned
7. Variable length subnetting also called _________ subnetting 1 K2 CO3
divides the network into subnets.

Page 7 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

a) classful b) classless c) fixed class d) variable class

8. If the 32-bit binary address starts with a bit 0, then IP Address 1 K2 CO3
belongs to _________
a) Class A b) Class B c) Class C d) Class D
9. IPV6 supports __________Internet Addresses. 1 K2 CO3
a) 2128 b) 2256 c) 2146 d) 2136
10. Which of the following is/are addressing methods used in IPV6 1 K2 CO3
Addressing?
a) Unicast Addressing b) Multicast Addressing c) Anycast
address d) All of the mentioned

Unit - III / Part - B / 2Marks

Mark
K–
Sl.No s
Questions Leve CO
. Split-
l
up
1. 2 K2 CO3
Identify when the forwarding table is used.
2. 2 K1 CO3
What are the metrics used by routing protocols?
3. Choose the class of the following IP address: 2 K2 CO3
(a)110.34.56.45
(b)212.208.63.23
4. 2 K1 CO3
How would you design Class A, Class B and Class C of IP?
5. 2 K1 CO3
Define routing.
6. 2 K1 CO3
Draw the sketch of the IPv4 packet header.
7. 2 K1 CO3
What is the Border Gateway Protocol (BGP)?
8. Discover the network address in a class A subnet with the 2 K2 CO3
IP address of one of the hosts as 25.34.12.56 and mask
255.255.0.0?
9. 2 K1 CO3
What is the need for subnetting?
10. 2 K1 CO3
Define packetizing.
11. 2 K2 CO3
What is the need for fragmentation?
12. How routers differentiate the incoming unicast, 2 K2 CO3
multicast and broadcast IP packets?
13. 2 K1 CO3
What is multicast routing?
14. Can you relate the two different classes of routing 2 K2 CO3
protocol?
15. 2 K2 CO3
Differentiate between forwarding table and routing table.
16. 2 K1 CO3
Draw the OSPF header format.
17. What is the benefits of Open Shortest Path First 2 K1 CO3
(OSPF) protocol?
18. Determine the two major mechanisms defined to help 2 K2 CO3
transition from IPv4 to IPv6.
19. Test whether the following IPv6 address notations are correct. 2 K2 CO3
(a)::0F53:6382:AB00:67DB:BB27:7332

Page 8 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

(b)7803:42F2::::88EC:D4BA:B75D:11CD
20. 2 K1 CO3
What are all the metrics used by routing protocols?

Unit - III / Part - C / 10 Marks

Sl. Marks K–
No Questions Split-u Leve CO
. p l
1. Explain in detail the operation of OSPF protocol by considering K1 CO3
a suitable network. 10
2. Explain the Distance Vector routing algorithm. Analyze its K1 CO3
limitations compared with other routing algorithms. 10
3. 10 K1 CO3
Describe the multicast routing in detail.
4. Explain about IPv6? Compare IPv4 and IPv6. 10 K2 CO3
5. (i)What is Internet multicasting? Explain in detail. 5 K1 CO3
(ii)Discuss in detail the various aspects of IPv6. 5
6. Develop in detail the datagram approach: Connectionless K2 CO3
services. 10
7. Explain the working of Link state Routing in detail. 10 K2 CO3
8. Examine the function of the Border Gateway Protocol used K2 CO3
for Inter domain routing in internetwork. 10
9. Describe in detail the operation of Virtual Circuit K1 CO3
Approach: Connection Oriented Service. 10
10. Compare Classful Addressing and Classless Addressing. 10 K2 CO3
11. Find the class of each IP address. Give a suitable explanation. K1 CO3
(i)227.12.14.87
(ii)193.14.56.22
(iii)14.23.120.8
(iv)252.5.15.111
(v)134.11.78.56 10
12. Why is subnetting necessary? With suitable examples, develop K2 CO3
the concept of subnetting in class B networks. 10
13. (i) Interpret the function of Routing Information Protocol (RIP) 5 K1 CO3
(ii) Draw the IPv6 packet header format 5

UNIT - IV

Unit - IV / Part - A / 1 Mark/ MCQ

Sl. K–
Marks
No Questions Leve CO
Split-up
. l
1. TCP sequence number field is of _____. 1 K1 CO4
a) 8 bit b) 16 bit c) 24 bit d) 32 bit

2. Which of the following is a reliable protocol? 1 K1 CO4

a) TCP b) UDP c) Both d) None

Page 9 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

3. RSVP stands for ____ 1 K1 CO4

a) Resource Reservation Protocol
b) Resource Reserved Protocol
c) Resource Reservation Prototype
d) Resource Reserved Prototype
4. MPLS stands for _____. 1 K1 CO4
a) Multi Protocol Label Switching
b) Multi Ping Label Switching
c) Multi Processor Label Switching
d) Multi Protocol Load Switching
5. What is SCTP? 1 K1 CO4
a) Session Control Transmission Protocol
b) Session Concept Transmission Protocol
c) Stream Concept Transport Protocol
d) Stream Control Transmission Protocol
6. _____protocol makes it easier to establish reliable connections. 1 K1 CO4
a) SCTP b) TCP/IP c) OSI d) DQN
7. RED algorithm defines the details of how to monitor the __ 1 K1 CO4
a) queue length b) quality of session c) sessions d) data
8. What does SSL stand for? 1 K1 CO4
a) secure socket layer b) security socket layer
c) socket security layer d) session secure layer
9. TCP has segments, while SCTP has 1 K1 CO4
a) Frames b) Slots c) Packets d) Path Slots
10. The maximum size of the TCP header is_____. 1 K1 CO4
a) 20 bytes b) 40 bytes c) 60 bytes d) 80 bytes

Unit - IV / Part - B / 2Marks

Mark
K–
Sl.No s
Questions Leve CO
. Split-
l
up
1. 2 K1 CO4
List the flag used in the TCP header.
2. 2 K2 CO4
Summarize IP addresses versus port numbers
3. 2 K1 CO4
What is the purpose of TCP push operation?
4. 2 K1 CO4
List the different phases used in TCP connection.
5. 2 K2 CO4
Differentiate between TCP and UDP.
6. 2 K2 CO4
List the various congestion control techniques in TCP.
7. 2 K2 CO4
How does UDP address flow control mechanisms?
8. 2 K1 CO4
State the purpose of the service model.
9. 2 K1 CO4
What is the socket address?
10. 2 K1 CO4
List down TCP services.

Page 10 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

Unit - IV / Part - C / 10 Marks

Sl. Marks K–
No Questions Split-u Leve CO
. p l
1. 10 K1 CO4
With a neat architecture, explain TCP in detail.
2. Define UDP, DIscuss the operations of UDP. Explain UDP K1 CO4
checksum with one example. 10
3. Discuss in detail the various congestion control mechanisms in 10 K2 CO4
TCP.
4. Explain adaptive flow control and retransmission techniques used in 10 K1 CO4
TCP.
5. Explain the various functionalities of SCTP in detail. 10 K2 CO4
6. Explain the various congestion avoidance techniques in TCP. 10 K2 CO4
7. How a network that makes use of the sliding window protocol K2 CO4
and explains in detail the protocol used. 10
8. (i)Draw a TCP state transition diagram for connection K2 CO4
management. 6
(ii)If IP provides connectionless service. How TCP supports
connection oriented service? 4
9. Explain the operation of Go-Back-N protocol in detail. 10 K2 CO4
10. With a diagram explain about TCP connection management. 10 K2 CO4

UNIT - V

Unit - V / Part - A / 1 Mark/ MCQ

Sl. K–
Marks
No Questions Leve CO
Split-up
. l
1. HTTP version 1.1 specifies a ________ connection by default. 1 K1 CO5
a) persistent b) nonpersistent c) dynamic d) static
2. ____________ is a language for creating Web pages. 1 K1 CO5
a) HTTP b) HTML c) FTTP d) Pascal
3. File Transfer Protocol (FTP), uses same operation used by 1 K1 CO5
a) ICMP b) STMP c) TCP d) FSK
4. The password is sent to the server using ________ command 1 K1 CO5
a) PASSWD b) PASS c) PASSWORD d) None
5. SMTP is a simple 1 K1 CO5
a) TCP protocol b) TCP/IP protocol c) IP d) None
6. All telnet operations are sent as ________ 1 K1 CO6
a) 4 bits b) 8 bits c) 18 bits d) 10 bits
7. Which is the lowest level in the SSH protocol stack? 1 K1 CO6
a) SSH Transport Layer Protocol b) TCP c) IP d) SSH User
Authentication Protocol
8. Domain, which is used to map an address to a name is 1 K1 CO6

Page 11 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

a) Generic Domains b) Inverse Domain c) Main Domains d)

Sub-Domains
9. FQDN stands for_____. 1 K1 CO6
a) Filled Quality Domain Name
b) False Quality Domain Name
c) Fully Qualified Domain Name
d) First Qualified Domain Name
10. SNMP uses two other protocols:________ and _________ 1 K1 CO6
a) MIB; SMTP b) SMI; MIB c) FTP; SMI d) None

Unit - V / Part - B / 2Marks

Mark
K–
Sl.No s
Questions Leve CO
. Split-
l
up
1. 2 K1 CO5
Define Persistent and Non-persistent connections.
2. 2 K1 CO5
Mention the types of HTTP messages.
3. 2 K1 CO5
What is the purpose of FTP?
4. 2 K2 CO5
What is the use of HyperText Transfer Protocol (HTTP)?
5. 2 K2 CO5
Differentiate IMAP and POP.
6. 2 K2 CO5
How would you express the URL?
7. 2 K2 CO5
What are the groups of HTTP headers?
8. 2 K1 CO5
Mention the usage of conditional get in HTTP.
9. 2 K2 CO5
Draw and construct the scenario of Electronics mail.
10. 2 K2 CO5
Mention the protocol used for e-mail security.
11. 2 K3 CO6
Differentiate IMAP and SMTP.
12. 2 K1 CO6
Mention the different levels in domain name space.
13. 2 K1 CO6
How would you discover MIME types and subtypes?
14. 2 K2 CO6
Outline the need of DNS?
15. 2 K1 CO6
List out the function of SSH components?
16. 2 K2 CO6
What are the three basic pieces of MIME with examples?
17. 2 K2 CO6
What is the use of SNMP protocol in a network?
18. 2 K1 CO6
Define SMTP.
19. 2 K2 CO6
Comparison between GET and SET in SNMP.
20. 2 K3 CO6
How to design a MIB for a simple SNMP?

Page 12 of 13
 End Semester Exam_QB_20CSPW401_COMPUTER NETWORKS WITH LAB

Unit - V / Part - C / 10 Marks

Sl. Marks K–
No Questions Split-u Leve CO
. p l
1. (i)Examine how SMTP transfers messages from one host to K2 CO5
another with suitable illustrations. 4
(ii)Assess IMAP with its state transition diagram. 6
2. 10 K2 CO5
Explain in detail about HTTP operation.
3. 10 K2 CO5
Examine your understanding of File Transfer Protocol.
4. Explain the WWW in detail. 10 K1 CO5
5. Describe the message format, message transfer and the 10 K2 CO5
underlying protocol involved in the working of the electronic
mail.
6. Explain the working of Email in detail. 10 K2 CO5
7. (i)Tabulate the various HTTP request operations. 5 K3 CO6
(ii)Identify the comparison between SMTP, MIME and IMAP. 5
8. Write in detail about DNS and its frame format. 10 K1 CO6
9. Assess the importance of Simple Network Management K3 CO6
Protocol (SNMP)? 10
10. What is SSH? Explain it briefly. 10 K1 CO6
11. Assess in detail about DNS operation and its significance. 10 K3 CO6
12. (i)Develop in detail about SNMP messages. 6 K3 CO6
(ii)Organize the role of POP3 in Electronic mail applications. 4

Ms.M.Subashini, AP/CSE, SSIT. Dr.K.Pavendan, Assoc. Prof./CCE, SSIT

SUBJECT EXPERT COURSE COORDINATOR

Dr.K.Pavendan, Assoc. Prof./CCE, SSIT Dr.M.Pachhaiammal@Priya, HoD/CCE, SSIT.

COURSE MODERATOR HOD

Page 13 of 13