Extract from the online

catalog

PLC-RSC- 24DC/21
Order No.: 2966171

http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

PLC relay, consisting of base terminal block PLC-BSC.../21 with screw

connection and pluggable miniature relay with power contact, for
assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC

Product notes
WEEE/RoHS-compliant since:
Commercial data 11/15/2005
EAN
4 017918 130732

sales group G220

Pack 10 Pcs.
Customs tariff 85364190 http://
www.download.phoenixcontact.com
Gross weight in pieces 0.0398 KG Please note that the data given
Net weight per piece 0.03106 KG here has been taken from the
online catalog. For comprehensive
Catalog page information Page 400 (C-7-2015) information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.

Technical data

Dimensions
Width 6.2 mm
Height 80 mm
Depth 94 mm

PHOENIX CONTACT GmbH & Co. KG Page 1 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

Ambient conditions
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Coil side
Nominal input voltage UN 24 V DC
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Protective circuit Protection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display yes
Power dissipation for nominal condition 0.22 W

Contact side
Contact type 1 PDT
Contact material AgSnO
Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed
for voltages larger than 250 V (L1, L2, L3) between identical
terminal blocks in adjacent modules. Potential bridging is then
carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage 5 V (at 100 mA)
Min. switching current 10 mA (at 12 V)
Maximum inrush current on request
Limiting continuous current 6A
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 2 A (at 24 V, DC13)
60947
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)

PHOENIX CONTACT GmbH & Co. KG Page 2 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

General
Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.)
Operating mode 100% operating factor
Mechanical service life 7
2 x 10 cycles
Flammability rating according to UL 94 V0
Designation Standards/regulations
Standards/regulations IEC 60664
EN 50178
IEC 62103
Pollution degree 3
Overvoltage category III
Mounting position any
Assembly instructions In rows with zero spacing

Connection data input side

Connection name Coil side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
AWG conductor cross section 26 ... 14

Certificates / Approvals

Certification cULus Listed, cULus Recognized, EAC, GL, RC FRT

Certifications applied for:

Certification Ex:

PHOENIX CONTACT GmbH & Co. KG Page 3 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

Accessories

Item Designation Description

Assembly
0801762 NS 35/ 7,5 CU UNPERF DIN rail, material: Copper, unperforated, height 7.5 mm, width 35
2000MM mm, length: 2 m
0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm
0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
mm, length: 2 m
0801377 NS 35/ 7,5 V2A UNPERF DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm,
2000MM Length: 2000 mm, Color: silver
1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick,
material: aluminum, height 15 mm, width 35 mm, length 2000 mm
1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
mm, width 35 mm, length: 2 m
1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick
layer, perforated, height 15 mm, width 35 mm, length: 2000 mm
1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35
mm, length: 2 m
1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
mm, width 35 mm, length: 2 m
2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a
PLC terminal strip. Furthermore, it is used for: visual separation
of groups, safe isolation of different voltages of neighboring PLC
relays in acc. with DIN VDE 0106-101, isolation

Bridges
2966812 FBST 6-PLC BU Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: blue
2966825 FBST 6-PLC GY Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: gray
2966236 FBST 6-PLC RD Single plug-in bridge, Length: 6 mm, Number of positions: 2,
Color: red
2967688 FBST 8-PLC GY Single plug-in bridge, Length: 8 mm, Number of positions: 2,
Color: gray
2966692 FBST 500-PLC BU Continuous plug-in bridge, Length: 500 mm, Color: blue
2966838 FBST 500-PLC GY Continuous plug-in bridge, Length: 500 mm, Color: gray
2966786 FBST 500-PLC RD Continuous plug-in bridge, Length: 500 mm, Color: red

PHOENIX CONTACT GmbH & Co. KG Page 4 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

Connector/Adapter
2296061 PLC-V8/D15B/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT,
etc./see "Additional Products"). 15-pin D-SUB female connector,
control logic: Positive switching
2296058 PLC-V8/D15S/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT,
etc./see "Additional Products"). 15-pin D-SUB male connector,
control logic: Positive switching
2295554 PLC-V8/FLK14/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT,
etc./see "Supplementary Products"). 14-pos. flat-ribbon cable
connection for the PLC system cabling, control logic: Plus
switching
2304102 PLC-V8/FLK14/OUT/M V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT,
etc./see "Supplementary Products"). 14-pos. flat-ribbon cable
connection for the PLC system cabling, control logic: Minus
switching

Marking
1051016 ZB 6,LGS:FORTL.ZAHLEN Zack marker strip, Strip, white, labeled, can be labeled with:
Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20,
etc. up to 491 - 500, Mounting type: Snap into tall marker groove,
for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
5060935 ZB 6/WH-100:UNBEDRUCKT Zack marker strip, Strip, white, unlabeled, can be labeled with:
Plotter, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
1051003 ZB 6:UNBEDRUCKT Zack marker strip, Strip, white, unlabeled, can be labeled with:
Plotter, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm

Power terminal block

2966508 PLC-ESK GY Power terminal block, for the input of up to four potentials, for
mounting on NS 35/7.5

Tools
1204517 SZF 1-0,6X3,5 Actuation tool, for ST terminal blocks, also suitable for use as a
bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip,
with non-slip grip

PHOENIX CONTACT GmbH & Co. KG Page 5 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

Drawings

Diagram

Interrupting rating
Curve A
Maximum permissible continuous voltage
Umax with limiting continuous current on the
contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop
after pre-excitation (see relevant technical
data)

Circuit diagram

PHOENIX CONTACT GmbH & Co. KG Page 6 / 7

http://www.phoenixcontact.com Nov 5, 2015
PLC-RSC- 24DC/21 Order No.: 2966171
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2966171

Address

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstr. 8
32825 Blomberg,Germany
Phone +49 5235 3 00
Fax +49 5235 3 41200
http://www.phoenixcontact.com

© 2014 Phoenix Contact

Technical modifications reserved;

PHOENIX CONTACT GmbH & Co. KG Page 7 / 7

http://www.phoenixcontact.com Nov 5, 2015