Module 1 Assignment
Module 1 Assignment
Engineering utilities 1 – AS
100
Class I.D. number: 0294002
“Module 1 Assignment”
Submitted by:
Elijah E. Pluma BSCE-2c
Submitted to:
Engr. Kevin Kristian L. Penaserada
1) A small and Medium-gauge electrical conductors used in
writing in buildings are typically categorized by the
American Wire Gauge (AWG). The AWG number (No.) of a
conductor is inversely proportional to the cross-section
diameter of the wire – that is, a smaller gauge number
identifies a thicker wire. Approximate the resistance in
100 and 500 ft lengths for the following conductors. A
no. 12 AWG copper conductor (wire) with a resistance of
1.62Ω/1000 ft.
Solution:
For the 100 ft conductor:
1.62 Ω
100 ft × =0.162Ω
1000 ft
For the 500 ft conductor:
1.62 Ω
500 ft × =0.81Ω
1000 ft