Thick Film Chip Resistors No TRM-XX0S001D

TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 1/13

1. Scope :
This specification applies for the RM series of thick film chip resistors made by TA-I.

2. Construction: Over Coat Conductor

Plating Sn

Resistive Element
Ni Plating
Ceramic Substrate

3. Type Designation:

RM 10 J TN 103
Product Code Size Tolerance Packaging Nominal
RM : Chip Resistor Power Rating Resistance

02-0201 1/20W J-± 5% T-Paper Tape 3 digits, e.g.,:

04-0402 1/16W G-± 2% E-Embossed Tape
06-0603 1/10W F-± 1% B-Bulk Cassette (E-24) 103 = 103Ω = 10kΩ
10-0805 1/8W D-± 0.5% 0 = 0Ω
12-1206 1/4W B-± 0.1% +N: Lead-Free 4 digits, e.g., :
13-1210 1/3w
20-2010 1/2W Special (E-96) 1540 = 154Ω
25-2512 1W L : 06 – 2mm pitch 43R2 = 43.2Ω
paper Tape

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 2/13

4. Dimensions:

UNIT: mm
Style L W C d t
RM02 0.60±0.03 0.30± 0.03 0.1± 0.05 0.15± 0.05 0.25± 0.05

+0.1
RM04 1.00 0.50± 0.05 0.20± 0.10 0.25± 0.10 0.35± 0.05
-0.05
+0.2
RM06 1.60± 0.10 0.80± 0.10 0.30± 0.20 0.30 0.45± 0.10
-0.1

RM10 2.00± 0.10 1.25± 0.10 0.40± 0.20 0.40± 0.20 0.50± 0.10

RM12 3.10± 0.10 1.55± 0.10 0.50± 0.30 0.40± 0.20 0.60± 0.10

RM13 3.10± 0.10 2.55± 0.10 0.50± 0.30 0.40± 0.20 0.60± 0.10

RM20 5.00± 0.15 2.50± 0.15 0.60± 0.30 0.50± 0.25 0.60± 0.10

RM25 6.30± 0.20 3.20± 0.20 0.60± 0.30 0.50± 0.25 0.60± 0.10

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 3/13

5. Ratings & Characteristics :

Resistance Range(Ω)
Power Max. Max.
Style Rating T.C.R
Rating Working Over- Load
Voltage (PPM/℃)
at 70℃ Voltage Voltage B(± 0.1%) D(± 0.5%) F(± 1%) G(± 2%) J(± 5%)
E-96 E-96 E-96 E-24 E-24
Refer
RM02 1/20W 25V 50V ± 200 10Ω-1MΩ 10Ω-1MΩ 10Ω-10MΩ
5.2
± 200 10Ω-1MΩ 10Ω-1MΩ 10Ω-10MΩ
Refer
RM04 1/16W 50V 100V +500
5.2 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
-200
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer 10Ω-10M 10Ω-10M
RM06 1/10W 50V 100V ± 200
5.2 Ω Ω
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer
RM10 1/8W 150V 300V ± 200 10Ω-10MΩ 10Ω-10MΩ
5.2
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer
RM12 1/4W 200V 400V ± 200 10Ω-10MΩ 10Ω-10MΩ
5.2
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer
RM13 1/3W 200V 400V ± 200 10Ω-10MΩ 10Ω-10MΩ
5.2
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer
RM20 1/2W 200V 400V ± 200 10Ω-10MΩ 10Ω-10MΩ
5.2
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
± 100 56Ω-560kΩ 56Ω-560kΩ 10Ω-1MΩ
Refer
RM25 1W 200V 400V ± 200 10Ω-10MΩ 10Ω-10MΩ
5.2
± 400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω

OΩ THICK FILM CHIP RESISTORS

Style Rated Current Max Overload Current Resistance Range
RM02 0.5A 1A 50mΩ MAX
RM04 1A 2.5A 50mΩ MAX
RM06 1A 2.5A 50mΩ MAX
RM10 2A 5A 50mΩ MAX
RM12 2A 5A 50mΩ MAX
RM13 2A 5A 50mΩ MAX
RM20 2A 5A 50mΩ MAX
RM25 2A 5A 50mΩ MAX

2. Operating Temp(℃): : -55℃ 〜 +125℃

Note : Except for the above standardized products, we also provide the
customized products.

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 4/13

5.1 Derating Curve :

For resistors operated at ambient temperature over 70℃ , power rating shall be derated in
accordance with figure 1.

P max.
100

Power ratio ( % )
50

0
-55 50 70 100 125
Ambient Temp. ( °C )
Figure 1

5.2 Rated Voltage:

The rated voltage is calculated by the following formula:

E= P*R E=Rated Voltage(V)

P=Rated Power(W)
R=Resistance Value(Ω)

E.G. : What is RM06JTN102 the rated voltage ?

RM06JTN102 P:1/10W ; R:102 = 1KΩ = 1000Ω

E= 0.1(W) * 1000(Ω) = 10 (V)

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 5/13

6. Reliability Tests: (As specified in JIS C 5202)

Reference
Test Items Condition of Test Test Limits
standard
Temperature Coefficient of +25〜 +125 ℃
JIS-C5202-5.2 Refer 5.0
Resistance

± (2% + 0.1Ω )
Short Time Overload JIS-C5202-5.5 2.5 X rated voltage for 5s
0Ω : 50mΩ or less

3.0 X rated voltage or Max Overloading ± (5.0% + 0.1Ω)

Intermittent Overload Test JIS-C5202-5.8 voltage ,1sec “ON” , 25sec “OFF” , 10000 cycles
(Remarks : 0201 / 0402 2.5 X RCWV * ) 0Ω : 50mΩ or less

± (3.0% + 0.1Ω)
1000 hours at rated voltage, 70℃ , 1.5hours
Load Life JIS-C5202-7.10
“ON “, 0.5hour “OFF”
0Ω : 100mΩ or less

± (3.0% + 0.1Ω)
1000 hours at rated voltage , 40± 2℃,
Load Life with Humidity JIS-C5202-7.9
0Ω : 100mΩ or less
90~95% RH 1.5hours “ON “, 0.5hour “OFF”
Without mechanical damage

1% : ± (0.5%+0.05Ω)
2%, 5% :± (1.0%+0.05Ω)
Rapid Change of Temperature JIS-C5202-7.4 -55℃ (30 min. ) / +125 ℃(30 min. ) 5 cycles
0Ω : 50mΩ or less

At least 95% of surface area

245± 5℃ solder, 3± 0.5 sec dwell.
Solderability JIS-C5202-6.11 of electrode shall be covered
Solder : Sn96.5 / Ag3.0 / Cu0.5
with new solder.
0.5%,1%:± (0.5%+0.05Ω)
Robustness of Termination 2%,5%:± (1.0%+0.05Ω)
JIS-C5202—6.1 3mm deflection
(Bending Strength)
0Ω: 50mΩ or less

No abnormalities such as
Dielectric Withstanding Applying voltage :
JIS-C5202-5.7 flashover, burning dielectric
Voltage (Voltage Proof) 300V for a minute .
breakdown shall appear.

Insulation Resistance JIS-C5202-5.6 Applying voltage 100V for 1 minute. ≧1GΩ

1% : ± (1.0%+0.05Ω)
2%,5% : ± (2.0%+0.1Ω)
Resistance to Dry Heat JIS-C5202-7.2 125± 5℃ for 96± 4hrs
0Ω: 50mΩ or less

0.5%,1%:± (0.5%+0.05Ω)
2%, 5%:± (1.0%+0.05Ω)
Resistance to Soldering Heat JIS-C5202-6.10 270 ± 5℃ solder , 10 ± 1 sec dwell .
0Ω: 50mΩ or less

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 6/13

Component , Lead-Free Soldering part 8 :

Solder Heat Resistance Test for SMD. Lead-
Free Soldering “

Temp. Cycles :
Whisker SONY -35 ± 5℃ / 125 ± 5℃ , Keep 7 min Whisker formation :
SS-00254-8 Testing duration : 500± 4 hours 50 um or less .

Temp. Humidity Chambers:

Temperature : 85℃
Humidity : 85% RH
Testing duration : 500± 4 hours .

Component , Lead-Free Soldering part 5 :

Solder Heat Resistance Test for SMD. Lead-
Free Soldering “

Flow Solder :
Pre – heat : 100 to 105 ℃ 30± 5 sec
Temperature : 260± 3℃ 10 +1/ -0 sec
The entire sample shall be dipped in solder. Electrical characteristics shall be
SONY The specimen shall be stored at standard Satisfied .
Resistance to soldering heat SS-00254-5 Without distinct deformation in
atmospheric conditions for 1 hour .
appearance
Iron Solder :
Bit temperature : 350 ± 10℃
Application time of soldering iron : 3 +1/- 0sec
Apply the soldering iron to the electrode .
The specimen shall be stored at standard
atmospheric conditions for 1 hour , after
which the measurements shall be made

Note* : RCWV : Rated continuous working voltage .

7. Marking
7.1 ± 2% & ± 5%(E24)
Resistance value is expressed by 3 digits, the first two digits represent the significant figures of

nominal resistance value inΩ, and the third digit represents exponent for base of 10.
E.G. :, 472 = 47× 102 = 4700Ω = 4.7KΩ

7.2 ± 1% (E96 )
Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant
figures of nominal resistance value inΩ, and the fourth digit represents exponent for base of 10.

E.G. : 4701 = 470× 101 = 4700Ω = 4.7K

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 7/13

7.3 ± 1%(RM06/E96)
When the marking space is too small in such small-sized resistors as RM06, the marking can not
made by 4 digits and may be made by two digits combined with one English capital.
Symbol for E96 series nominal resistance value
Symbol E96 Symbol E96 Symbol E96 Symbol E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Symbol for multipliers
Symbol A B C D E F G H X Y Z
multipliers 100 101 102 103 104 105 106 107 10-1 10-2 10-3
E.G : 02C = 102× 102 = 10.2kΩ
Notes :
When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series
is used as mark .
E.G. : 0603 , 120Ω , 1% Marking is 121

7.4 ± 1%( E96/3digitals)

The resistance value by 3 digits is requirement for customer.

7.5 No Marking for RM04

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 8/13

8. Taping & Reel :

8.1 Taping Dimensions
8.1.1 4 mm pitch paper:

Packing Style A B W F E P1 P2 P0 D0 T
RM06 1.1± 0.1 1.9± 0.1 0.64± 0.1
RM10 1.6± 0.15 2.4± 0.2 +0.1
Paper 8.0± 0.2 3.5± 0.05 1.75± 0.1 4.0± 0.1 2.0± 0.05 4.0± 0.1
RM12 2.0± 0.15 3.6± 0.2 ψ1.5 0.84± 0.1
-0
RM13 2.8± 0.2 3.6± 0.2

8.1.2 2 mm pitch paper :

Packing Style A B W F E P1 P2 P0 D0 T
RM02 0.37± 0.05 0.67± 0.1 2.0± 0.1 2.0± 0.05 0.37± 0.1
+0.1
Paper RM04 0.7± 0.05 1.2± 0.05
8.0± 0.2 3.5± 0.05 1.75± 0.1
2.0± 0.1 2.0± 0.1 4.0± 0.1
ψ1.5
0.45± 0.1
RM06 1.1± 0.1 1.9± 0.1 2.0± 0.1 2.0± 0.1 -0 0.64± 0.1

8.1.3 4 mm pitch Emboss :

Packing Type A B W F E P1 P2 P0 D0 T
RM20 2.8± 0.2 5.3± 0.2 +0.1
Emboss 12.0± 0.2 5.5± 0.05 1.75± 0.1 4.0± 0.1 2.0± 0.05 4.0± 0.05 ψ1.5 0.85± 0.15
RM25 3.6± 0.2 6.9± 0.2 -0

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 9/13

8.14. Bulk Case Specifications:

UNIT: mm
Paper Tape
Package 4 mm pitch 2 mm pitch Emboss Plastic Tape Bulk
4 mm pitch
Style Size 180mm/R 250mm/R 180mm/R 250mm/R
RM 02 10000
RM 04 10000 20000 50000
RM 06 5000 10000 10000 20000 20000
RM 10 5000 10000 10000
RM 12 5000 10000 5000
RM 13 5000
RM 20 4000
RM 25 4000

8.2 Reel Specifications:

UNIT: mm
Style ψA ψB ψC W T
RM02 /04 / 06
9.0 ± 1.0 11.5 ± 1.0
RM10 /12 /13 178.0 ± 1.0 60.0 ± 1.0 13.0 ± 1.0
RM20 / 25 13.0 ± 1.0 15.5 ± 1.0

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 10/13

8.3. Peel –off force :

Peel –off force of paper and blister tape is in accordance with “JIS-C5202 ”
that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute.
pull
top cover tape 300 mm/min

10〜15∘ standard: 0.1 ~ 0.7 N

carrier tape

9. Label :
9.1 Manufacture Label :
Date Code Resistance Tolerance Type

QTY: 5000 PCS

102 J
Lot No: 0086166K- 0008 0603

9.2 Customer Label:

Lead-Free Products

TA-I TECH LEAD FREE

0603 5%(T) 1KΩ
Product Spec.
105A702723 RM06JTN102
Customer No:
04.05.21 Date

Year Month

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 11/13

10. Recommended land patterns :

Land pattern Dimension ( mm )

Type Size a b c
RM 02 (0201 ) 0.25~0.3 0.7~0.9 0.3~0.4
RM 04 (0402 ) 0.50~0.6 1.4~1.6 0.4~0.6
RM 06 (0603 ) 0.7~0.9 2.0~2.2 0.8~1.0
RM 10 (0805 ) 1.0~1.4 3.2~3.8 0.9~1.4
RM 12 (1206 ) 2.0~2.4 4.4~5.0 1.2~1.8
RM 13 (1210 ) 2.0~2.4 4.4~5.0 2.3~3.5
RM 20 (2010 ) 3.3~3.7 5.7~6.5 2.3~3.5
RM 25 (2512 ) 3.6~4.0 7.6~8.6 2.3~3.5

11. Recommend IR – Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5)

+5
Peak : 250 ℃ , 5 sec
−0
Pre – heat Zone : 150 to 180 ℃, 90± 30 sec
Soldering Zone : 230℃ or higher , 30± 10 sec

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 12/13

12. Storage Conditions:

Temperature: 5℃~35℃,Humidity:40%~75%

13. Shelf Life:

2 years from manufacturing date.

14. ECN :
Engineering Change Notice: The customer will be informed with ECN if there is significant
modification on the characteristics and materials described in Approval Sheet.

15. Manufacturing Country & City :

TA-I TECHNOLOGY CO., LTD. ( Taiwan– Tao Yuan )

Tel: 886-3-3246169 Fax : 886-3-3246167

Associated companies :
(1) FORTUNE TASK RESISTOR FACTORY ( China – Dong Guan )
Tel : 86-769-3394790 Fax : 86-769-3394794

(2) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China – Su Zhou)

Tel :86- 512-3457879 Fax : 86-512-3457869

(3) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia – Pulaupinang )

Tel :604- 3900480 Fax : 604-3901481

(4) P.T.TAI ELECTRONICS Indonesia ( Indonesia – Jakarta )

Tel :002-62-21-44820254 Fax : 002-62-21-44820256

TA-I TECHNOLOGY CO., LTD

 Thick Film Chip Resistors No TRM-XX0S001D
TA-I ( LEAD – FREE FOR RM SERIES STANDARD ) page 13/13

Revise record
Date Content Owner

4. Ratings & Characteristics :

2005/11/25 Hank Liu
Adding Rating Voltage

TA-I TECHNOLOGY CO., LTD