Data sheet

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.: 100
Quantity: 1 Date: 28/10/2024
Page: 1 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Operating data
Requested flow rate 2200.00 m³/h Actual flow rate 2200.79 m³/h
Requested developed head 23.50 m Actual developed head 23.52 m
Pumped medium Water Efficiency 83.1 %
Clean water Power absorbed 169.41 kW
Pumped medium details Not containing chemical and Pump speed of rotation 993 rpm
mechanical substances which NPSH 3% 4.52 m
affect the materials NPSH required 5.02 m
Max. ambient air temperature 20.0 °C Discharge press. 2.30 bar.g
Min. ambient air temperature 20.0 °C
Fluid temperature 20.0 °C

Fluid density 998 kg/m³ Operating pressure (for 3.22 bar.g

Fluid viscosity 1.00 mm²/s indicated duty conditions)
Suction pressure max. 0.00 bar.g Shutoff head 32.90 m
NPSH available 10.00 m Min. allow. flow for continuous 1084.80 m³/h
Mass flow rate 610.11 kg/s stable operation
Max. power on curve 172.50 kW Min. allow. mass flow for 300.73 kg/s
Max. allow. mass flow 902.99 kg/s continuous stable operation
Design Single system 1 x 100 %
Performance test Yes

Design
Pump standard KSB axially split volute casing Impeller diameter 467.0 mm
pump Minimum impeller diameter 445.0 mm
Design Motor on separate drive Full impeller diameter 540.0 mm
lantern(DP) Direction of rotation from drive Clockwise
Orientation Vertical Bearing seal driver side V ring
Enhanced Finish No Bearing type driver side Anti-friction bearings
Suction flange (AS) according EN 1092-2 / DN 500 / PN 16 Lubrication type driver side Grease
to 21A / FF Bearing sealing end side V ring along with standard
Discharge flange (AD) EN 1092-2 / DN 400 / PN 16 labyrinth ring
according to 21A / FF Bearing type end side Anti-friction bearings
Shaft seal Single acting mechanical seal Bearing lubrication end side Grease
Shaft seal manufacturer KSB Temperature measurement With
Shaft seal type 4RDB tapping
Mechanical Seal Form Balanced Temperature sensor PT100 Without
Material code BQ1EMG motor side
Sealing plan E Single acting mechanical Vibration measurement With
(external circulation) tapping
Wear ring Casing wear ring Color Ultramarine blue (RAL 5002)
Wear ring type Standard design KSB-blue
Data sheet

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.: 100
Quantity: 1 Date: 28/10/2024
Page: 2 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Driver, accessories
Coupling With Available reserve 18.06 %
Number of poles 6
Motor stool Motor on separate drive
lantern(DP)

Scope of mounting parts:

Pump foot (scope of supply)
anchor bolts M30x380 (scope of supply)

Delivery : Pump mounted on pump foot

Driver type Electric motor
Drive standard mech. IEC
Model (make) KSB's Choice
Drive supplied by Standard motor supplied by
KSB - mounted by KSB
Motor const. type V1
Motor size 315L
Efficiency class Efficiency class IE4 acc. to
IEC60034-30-1
Motor speed 993 rpm
Frequency 50 Hz
Rated voltage 400 V
Rated power P2 200.00 kW

Materials SC1
Notes Bearing housing (350.1) Grey cast iron HT250
General criteria for a water analysis: pH-value >= 6,5; chloride Bearing housing (350.2) Grey cast iron HT250
content (Cl) <=250 mg/kg. Chlorine (Cl2) <=0.6 mg/kg. Shaft seal housing (441) Grey cast iron HT250
Ammonium (NH4+) <= 2 mg/kg, free of H2S; Chlorine (Cl2) Casing wear ring (502) 30Cr13
<=0.6 mg/kg. Shaft protecting sleeve 06Cr19Ni10
Volute casing (102) Ductile cast iron QT400-15 (524.2)
Pump shaft (211) Chrome steel 20Cr13
Double-entry impeller (234) ZG07Cr19Ni9

Packaging
Packaging category A0 Packing acc. to KSB Packaging for transport Truck
choice IPPC Standard ISPM 15 Yes
Packaging for storage Indoor

Nameplates
Nameplates language International
Data sheet

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.: 100
Quantity: 1 Date: 28/10/2024
Page: 3 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Certifications
Test time 5.0 min
Tests acc. to QCP-Plan Certificate Without
Test standard QCP to KSB SH Test participation Non-witnessed
Quantity, non-witnessed 1
Hydraulic performance test Quantity, witnessed 0
Acceptance standard ISO 9906 2B
Quantity meas. points Q-H 5 Final visual inspection
Certificate Without Certificate Without
Test participation Non-witnessed Test participation Non-witnessed
Quantity, non-witnessed 1 Quantity, non-witnessed 1
Quantity, witnessed 0 Quantity, witnessed 0

Balancing test Material certificates: Volute casing (102)

Balancing grade G 6,3 Certificate Test report 2.2 to EN 10204
Part Impeller
Certificate Without Material certificates: Pump shaft (211)
Test participation Non-witnessed Certificate Test report 2.2 to EN 10204
Quantity, non-witnessed 1
Quantity, witnessed 0 Material certificates: Double-entry impeller (234)
Certificate Test report 2.2 to EN 10204
Hydrostatic test (room temp.)
Range Complete pump with shaft Material certificates: Casing wear ring (502)
seal Certificate Test report 2.2 to EN 10204
Test pressure 4.19 bar.g

Order documentation
The following documents will be supplied with the order: QCP (quality control plan)
Technical data sheet General arrangement drawing
Auxiliary connection plan Performance curve
Material certificates Languages English
Operating manual
Performance curve

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.:100
Quantity: 1 Date: 28/10/2024
Page: 4 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Qmin

40
Total developed head

Qmin
[m] Qmin

20
ø540.0/A01

ø487.0/466.8/25°/15/A38
ø465.0/445.0/25°/15/A38

0 500 [m³/h] 1000 1500 2000 2500 3000 3500 4000

8 NPSHR
NPSH 3%
[m]
NPSH

4
0 500 [m³/h] 1000 1500 2000 2500 3000 3500 4000
Efficiency

50

[%]

0
0 500 [m³/h] 1000 1500 2000 2500 3000 3500 4000
Power Input

160

[kW]

140
0 500 [m³/h] 1000 1500 2000 2500 3000 3500 4000
Flow
Curve data
Speed of rotation 993 rpm Efficiency 83.1 %
Fluid density 998 kg/m³ Power absorbed 169.41 kW
Viscosity 1.00 mm²/s NPSHR 5.02 m
Flow rate 2200.00 m³/h NPSH 3% 4.52 m
Requested flow rate 2200.00 m³/h Curve number K1387.05/2
Total developed head 23.50 m Effective impeller diameter 467.0 mm
Requested developed head 23.50 m Acceptance standard ISO 9906 2B
Installation plan

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.:100
Quantity: 1 Date: 28/10/2024
Page: 5 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

660 255 345

998

Pump Centre
1130 525 900

915

40

965 375

900 530

475

765
700

765
750

Drawing is not to scale, for referrence only Dimensions in mm

Installation plan

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.:100
Quantity: 1 Date: 28/10/2024
Page: 6 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Motor Connections
Motor manufacturer KSB Motor Suction flange (AS) according EN 1092-2 / DN 500 / PN 16
Motor size 315L to 21A / FF
Motor power 200.00 kW Discharge flange (AD) EN 1092-2 / DN 400 / PN 16
Number of poles 6 according to 21A / FF
Speed of rotation 993 rpm

Baseplate
Design DP Installation Weight net
Size RDDJ04 Pump 2925 kg
Material Steel ST Baseplate 266 kg
Motor 1503 kg
Total 4694 kg
Foundation bolts anchor bolts M30x380

Connect pipes without stress or strain! For auxiliary connections see

Notes for dimensions: separate drawing.
Drawing is not to scale and only exemplary. Weights and dimensions shown are not
binding. Binding arrangement drawing only on request and with submittal of binding
motor dimension sheet
Dimensions without tolerance indication - shaft height: DIN 747
Dimensions without tolerance indication - welded parts: ISO 13920 - B/F
Dimensions without tolerance indication - Cast parts: ISO 8062-3 - DCTG 11
Dimensions without tolerance indication - Flange position: ISO 8062-3 - DCTG 11
Dimensions without tolerance indication - Flanges: acc. to flange standard
Dimensions without tolerance indication - Keyway and key at coupling: DIN6885 -
sheet 1
Dimensions without tolerance indication - Shaft diameter at coupling: DIN 7154 - m6

General notes:
Piping must be connected free of stress. The pump must not be used as
support for the piping (The pump is not an anchor point for the piping). The
piping must be fixed in such a way that no forces, vibrations or the weight of
the piping is transferred to the pump. Restrictions for forces and moments on
suction and pressure nozzle must be considered. Connection by means of
unrestrained expansion joints is not permitted!!
Connection plan

Customer item no.:

Communication dated: 28/10/2024 Number: ES 8003243825
Doc. no.: T91251 Item no.:100
Quantity: 1 Date: 28/10/2024
Page: 7 / 8

RDLO V 400-525 A SC1 G F Version no.: 1

Connections
1M.1 Pressure gauge connection G 1/2 Drilled and plugged.
1M.2 Pressure gauge connection G 1/2 Drilled and plugged.
6B Pumped liquid drain G1 Drilled and plugged.
6D Pumped medium - filling / venting G1 Drilled and plugged.
8A.1 Leakage drain G 1/2 Drilled
8A.3 Leakage drain G 3/4 Drilled
6D Sealing liquid outlet G1 Flexible pipe with T-connector
26M.1 SPM sensor connection (driver side) M8 Drilled and plugged.
4M.1 Temperature gauge connection G 1/2 Drilled and plugged.
(driven end)
4M.2 Temperature gauge connection (non G 1/2 Drilled and plugged.
driven end)