Denon AVRX2000 Avr Sm
Uploaded by
Karol IonasDenon AVRX2000 Avr Sm
Uploaded by
Karol Ionase Ver.
4
Please refer to the
MODIFICATION NOTICE.
SERVICE MANUAL
MODEL JP E3 E2 EK EA E1 E1K E1C
AVR-E400 P
AVR-X2000 P P P P
INTEGRATED NETWORK AV RECEIVER
• Cautions when replacing the FRONT PANEL(Only AVR-X2000E3):Depending on when the model was
manufactured, there may be washers in the FRONT PANEL screw positions. Washers are not used in the
replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the washers.
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
e
D&M Holdings Inc.
Contents
ABOUT THIS MANUAL..............................................................3 WIRING DIAGRAM.................................................................107
What you can do with this manual.............................................3 PRINTED WIRING BOARDS..................................................108
Using Adobe Reader (Windows version)...................................4 SCHEMATIC DIAGRAMS (1/24)............................................119
SAFETY PRECAUTIONS...........................................................6 FRONT UNIT (1/1).................................................................119
NOTE FOR SCHEMATIC DIAGRAM..........................................7 INPUT UNIT (1/1)...................................................................120
NOTE FOR PARTS LIST............................................................7 SMPS UNIT (1/1)...................................................................121
TECHNICAL SPECIFICATIONS.................................................9 VIDEO UNIT (1/3)..................................................................122
VIDEO UNIT (2/3)..................................................................123
DIMENSION..............................................................................10
VIDEO UNIT (3/3)..................................................................124
CAUTION IN SERVICING.........................................................11
AMP UNIT (1/2)......................................................................125
Initializing INTEGRATED NETWORK AV RECEIVER.............11
AMP UNIT (2/2)......................................................................126
Service Jig ...............................................................................11
MAIN UNIT (1/2)....................................................................127
DISASSEMBLY.........................................................................12 MAIN UNIT (2/2)....................................................................128
1. FRONT PANEL ASSY.........................................................14 HDMI UNIT (1/13)..................................................................129
2. PCB MX PORT/PCB RS232C (AVR-X2000E3 only) .........15 HDMI UNIT (2/13)..................................................................130
3. PCB HDMI...........................................................................16 HDMI UNIT (3/13)..................................................................131
4. POWER TRANS MAIN.......................................................17 HDMI UNIT (4/13)..................................................................132
5. PCB VIDEO ASSY..............................................................17 HDMI UNIT (5/13)..................................................................133
6. PCB SMPS..........................................................................18 HDMI UNIT (6/13)..................................................................134
7. RADIATOR ASSY................................................................20 HDMI UNIT (7/13)..................................................................135
SPECIAL MODE ......................................................................22 HDMI UNIT (8/13)..................................................................136
Special mode setting button (for E400E3 model).....................22 HDMI UNIT (9/13)..................................................................137
Special mode setting button (for X2000 model).......................23 HDMI UNIT (10/13)................................................................138
1. µcom/DSP Version display mode........................................24 HDMI UNIT (10/13)................................................................139
2. PANEL/REMOTE LOCK Selection mode............................28 HDMI UNIT (11/13).................................................................140
3. Service Related Selection mode.........................................29 HDMI UNIT (12/13)................................................................141
BLOCK DIAGRAM....................................................................32 HDMI UNIT (13/13)................................................................142
4. Protection Pass mode.........................................................49 EXPLODED VIEW ..................................................................143
5. DM860A Reboot mode........................................................49 PARTS LIST OF EXPLODED VIEW.......................................145
6. Remote ID Setup mode.......................................................50
PACKING VIEW......................................................................146
7. NETWORK Initialization mode............................................50
PARTS LIST OF PACKING & ACCESSORIES .....................147
JIG FOR SERVICING...............................................................52
SEMICONDUCTORS..............................................................148
WHEN THE MICROPROCESSOR IS REPLACED WITH A
1. IC's....................................................................................148
NEW ONE................................................................................55
2. FL DISPLAY......................................................................170
PROCEDURE FOR UPGRADING THE VERSION OF
THE FIRMWARE......................................................................55
1. How to update by DFW.......................................................55
2. How to update by DPMS.....................................................59
3. How to update by USB Memory..........................................66
ADJUSTMENT..........................................................................74
TROUBLE SHOOTING.............................................................82
1. POWER...............................................................................82
2. Analog video.......................................................................83
3. HDMI/DVI............................................................................87
4. AUDIO.................................................................................89
5. Network/USB.......................................................................92
6. SMPS..................................................................................95
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK
DIAGRAM.................................................................................98
LEVEL DIAGRAM.....................................................................99
BLOCK DIAGRAM..................................................................105
POWER DIAGRAM.................................................................106
2
ABOUT THIS MANUAL
Read the following information before using the service manual.
What you can do with this manual
Search for a Ref. No. (phrase) Jump to the target of a schematic
(Ctrl+Shift+F) diagram connector
You can use the search function in Acrobat Reader to
search for a Ref. No. in schematic diagrams, printed Click the Ref. No. of the target connector in the red
wiring board diagrams, block diagrams, and parts box around a schematic diagram connector.
lists. •The screen jumps to the target connector.
1.Press Ctrl+Shift+F on the keyboard.
• The Search window appears.
CP401
v
F
Shift
Ctrl
2.Enter the Ref. No. you want to search for in the
Search window, and then click the Search button.
CP106
•A list of search results appears.
•Page magnification stays the same as before the
jump.
3.Click an item on the list.
• The screen jumps to the page for that item, and the
search phrase is displayed.
3
Using Adobe Reader (Windows version)
Add notes to this data (Sign) Magnify schematic / printed wiring
The Sign function lets you add notes to the data in board diagrams - 1
this manual. (Ctrl+Space, mouse operation)
Save the file once you have finished adding notes.
Press Ctrl+Space on the keyboard and drag the
[Example using Adobe Reader X] mouse to select the area you want to view.
On the "View" menu, click "Sign".
• The selected area is magnified.
• The Sign pane appears.
Ctrl Space
• When you want to move the area shown, hold
down Space and drag the mouse.
[Example using Adobe Reader 9]
On the "Document" menu, click "Sign". • When you want to show a full page view, press
Ctrl+0 on the keyboard.
Print a magnified part of the manual
The Properties dialog box and functions will vary depending on your printer.
1. Drag the mouse to magnify the part you want to print.
2. On the "File" menu, click "Print".
3. Configure the following settings in the Print dialog box.
• Properties
Click this button and check that the printer is set to a
suitable paper size.
• Page to print
Select the following checkbox.
"More Options" : "Current View"
• Page Sizing & Handling
Select the following checkbox.
"Size" / "Size Options" : "Fit"
4. Click the Print button to start printing.
4
Magnify schematic / printed wiring Magnify schematic / printed wiring
board diagrams - 2 board diagrams - 3
(Pan & Zoom function) (Loupe Tool function)
The Pan & Zoom function lets you see which part of The Loupe Tool function lets you magnify a specific
a magnified diagram is being shown in a separate part of a diagram in a separate window.
window.
[Example using Adobe Reader X]
[Example using Adobe Reader X] On the "View" menu, point to "Zoom", and then click
On the "View" menu, point to "Zoom", and then click "Loupe Tool".
"Pan & Zoom".
• The Pan & Zoom window appears on the screen. • The Loupe Tool window appears on the screen.
[Example using Adobe Reader 9] [Example using Adobe Reader 9]
On the "Tools" menu, point to "Select & Zoom", and On the "Tools" menu, point to "Select & Zoom", and
then click "Pan & Zoom Window". then click "Loupe Tool Window".
5
SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
leakage current check
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state
(on, off and standby mode), if applicable.
CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in their
etc. Be sure to heed these cautions and the cautions original positions, check that no serviced parts have
described in the handling instructions. deteriorate the area around. Then make an insulation
◎◎ Cautions concerning electric shock! check on the external metal connectors and between
(1) An AC voltage is impressed on this set, so if you the blades of the power plug, and otherwise check that
touch internal metal parts when the set is energized, safety is ensured.
you may get an electric shock. Avoid getting an (Insulation check procedure)
electric shock, by using an isolating transformer Unplug the power cord from the power outlet, disconnect
and wearing gloves when servicing while the set is the antenna, plugs, etc., and on the power. Using a 500V
energized, or by unplugging the power cord when insulation resistance tester, check that the insulation
replacing parts, for example. resistance value between the inplug and the externally
(2) There are high voltage parts inside. Handle with exposed metal parts (antenna terminal, headphones
extra care when the set is energized. terminal, input terminal, etc.) is 1MΩ or greater. If it is
◎◎ C
aution concerning disassembly and less, the set must be inspected and repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs on
the edges of parts. The burrs could cause injury if fingers
are moved across them in some rare cases. Wear gloves CAUTION Concerning important
to protect your hands. safety parts
◎◎ Use only designated parts! Many of the electric and the structural parts used in the
The set's parts have specific safety properties (fire set have special safety properties. In most cases these
resistance, voltage resistance, etc.). Be sure to use parts properties are difficult to distinguish by sight, and the use
which have the same properties for replacement. The of replacement parts with higher ratings (rated power
burrs have the same properties. In particular, for the and withstand voltage) does not necessarily guarantee
important safety parts that are indicated by the z mark that safety performance will be preserved. Parts with
on schematic diagrams and parts lists, be sure to use safety properties are indicated as shown below on the
the designated parts. wiring diagrams and the parts list in this service manual.
◎◎ B
e sure to mount parts and arrange the wires Be sure to replace them with the parts which have the
as they were originally placed! designated part number.
For safety seasons, some parts use tapes, tubes or other
insulating materials, and some parts are mounted away (1) Schematic diagrams........Indicated by the z mark.
from the surface of printed circuit boards. Care is also (2) Parts lists........Indicated by the z mark.
taken with the positions of the wires by arranging them The use of parts other than the
and using clamps to keep them away from heating and designated parts could cause electric
high voltage parts, so be sure to set everything back as shocks, fires or other dangerous
it was originally placed. situations.
6
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If
the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set
is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
ALL CAPACITANCE
NOTE VALUES ARE
FOR PARTS EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
LIST
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.
NOTE FOR PARTS LIST
1. Parts indicated by "nsp" on this table cannot be supplied.
2. When ordering a part, make a clear distinction between "1" and "I" (i) to avoid mis-supplying.
3. A part ordered without specifying its part number can not be supplied.
4. Part indicated by "★" mark is not illustrated in the exploded view.
5. General-purpose Carbon Film Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
6. General-purpose Carbon Chip Resistors are not included are not included in the P.W.Board parts list.
(Refer to the Schematic Diagram for those parts.)
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
● Resistors
Ex.: RN 14K 2E 182 G FR
INSTRUCTIONS
Type Shape FOR
and per-
HANDLING
Power Resist-
ance
SEMI-CONDUCTORS
Allowable
error
Others AND OPTICAL UNIT
Electrostatic breakdown
formance
of the semi-conductors or optical pickup may occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.
RD : Carbon 2B : 1/8 W F : ±1% P : Pulse-resistant type
1. Ground for Human Body
RC : Composition 2E : 1/4 W
RS : Metal oxide film 2H : 1/2 W
G : ±2%
J : ±5%
NL : Low noise type
NB : Non-burning type
Be sure to
RW: winding
wear a grounding
3A : 1 W
band (1 MΩ)
K : ±10%
that is properly grounded
FR : Fuse-resistor
to remove any static electricity that may be
charged on
RN : Metal film the body.
3D : 2 W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3 W
2. Ground for Workbench 3H : 5 W
* Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface,
Resistance
where
1 8 the
2 semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through
1800ohm=1.8kohm
the body grounding band,ofbe
Indicates number careful
zeros to avoid
after effective contacting semi-conductors with your clothing
number.
2-digit effective number.
1 R 2 1.2ohm
1-digit effective number.
<Incorrect> 2-digit effective number, decimal point indicated by R.
<Correct> Grounding Band
: Units: ohm
● Capacitors
Ex.: CE 04W 1H 3R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error 1MΩ
formance
CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type
electrolytic 1A : 10 V G : ±2% BP : Non-polar type CBA
CA : Aluminium solid 1C : CBA
16 V J : ±5% HR : Ripple-resistant type
electrolytic 1E : 25 V K : ±10% DL : For change and discharge
CS : Tantalum electrolytic 1V : 35 V M : ±20% HF : For assuring high 1MΩ
frequency
CQ : Film 1H : 50 V Z : ±80% U : UL part
CK : Ceramic 2A : 100 V : - 20% C : CSA part Conductive Sheet or
CC : Ceramic 2B : 125 V P : +100% W : UL-CSA part Copper Plate
CP : Oil 2C : 160 V C : ±0.25pF F : Lead wire forming
CM: Mica 2D : 200 V D : ±0.5pF
CF : Metallized 2E : 250 V = : Others
CH : Metallized 2H : 500 V
2J : 630 V
* Capacity (electrolyte only)
2 2 2 2200μF 2 R 2 2.2μF
Indicates number of zeros after effective number. 1-digit effective number.
2-digit effective number. 2-digit effective number, decimal point indicated by R
･ Units:μF. ･ Units:μF.
* Capacity (except electrolyte)
2 2 2 2200pF=0.0022μF 2 2 1 220pF
Indicates number of zeros after effective number. (More than 2) Indicates number of zeros after effective number. (0 or 1)
2-digit effective number. 2-digit effective number.
･ Units:pF ･ Units:pF
･ When the dielectric strength is indicated in AC,"AC" is included after the dielectric strength value.
7
Personal notes:
8
TECHNICAL SPECIFICATIONS
nn Audio section nn Tuner section
• Power amplifier (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
Rated output(for E400 model): Receiving Range: FM 87.5 MHz – 107.9 MHz(for E400 model)
AM 520 kHz – 1710 kHz(for E400 model)
Front: FM 87.50 MHz – 108.00 MHz(for X2000 model)
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) AM 522 kHz – 1611 kHz(for X2000 model)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Usable Sensitivity: FM 1.2 μV (12.8 dBf)
Center: AM 18 μV
90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 50 dB Quieting MONO 2.8 μV (20.2 dBf)
125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Sensitivity:
Surround: S/N : MONO 70 dB (IHF–A weighted, DIRECT mode)
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) STEREO 67 dB (IHF–A weighted, DIRECT mode)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Total harmonic MONO 0.7 % (1 kHz)
Surround back: Distortion: STEREO 1.0 % (1 kHz)
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) nn General
Rated output(for X2000 model): Power supply:AC 120 V, 60 Hz
Front: AC 230 V, 50/60 Hz
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) Power consumption: 460 W
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Power consumption in standby mode: 0.1 W
Center: Power consumption in CEC standby mode:0.5 W
90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) Power consumption in network standby mode: 2.7 W
125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors: 6 – 16 Ω/ohms
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ/kohms
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N : 100 dB (IHF–A weighted, DIRECT mode)
9
DIMENSION
[AVR-E400 model]
Unit : in. (mm)
1 5/64
(27.5)
2 47/64
(69.5)
11 11/32 (288.0)
13 5/32 (334.0)
6 15/32 (164.5)
(54.0)
2 1/8
(18.5)
47/64
17 3/32 (434.0)
5 13/16 (147.5)
6 3/8 (162.0)
37/64 (14.5)
2 23/64
(60.0)
1 49/64 1 49/64
(45.0) 13 35/64 (344.0) (45.0)
Weight : 20 lbs 12 oz (9.4 kg)
[AVR-X2000 model]
Unit : in. (mm)
(23.5)
59/64
2 47/64
(69.5)6 15/32 (164.5)
12 63/64 (330.0)
11 11/32 (288.0)
(54.0)
2 1/8
(18.5)
47/64
17 3/32 (434.0)
6 67/64 (167.0)
6 (152.5)
37/64 (14.5)
2 23/64
(60.0)
1 49/64 1 49/64
(45.0) 13 35/64 (344.0) (45.0)
Weight : 20 lbs 15 oz (9.5 kg)
10
CAUTION IN SERVICING
Initializing INTEGRATED NETWORK AV RECEIVER
INTEGRATED NETWORK AV RECEIVER initialization should be performed when the μcom, peripheral parts of μcom, and
Digital PCB were replaced.
1. Turn off the power pressing "Power operation (X)" button.
2. Press "Power operation (X)" button while simultaneously while pressing "ZONE2 SOURCE" and "DIMMER" buttons.
3. Check that the entire display is flashing at intervals of about 1 second, and then release the 2 buttons.
The microprocessor will be initialized.
NOTE: •If step 3 fails, start over from step 1.
•All user settings will be lost and the factory setting will be recovered after the set is initialized.
So make sure to note down your setting beforehand for restoring after the initialization.
[AVR-E400E3 model]
[AVR-X2000 model]
Service Jig
When you repair the printing board, you can use the following JIG (Extension cable kit).
Please order it from Denon Official Service Distributor in your region if necessary.
8U-110084S : EXTENSION UNIT KIT : 1 Set
8U-110136S : EXTENSION UNIT KIT : 1 Set
(Refer to 52 page.)
When you update the firmware by DFW, you can use the following JIG (RS232C to internal connector conversion adapter
with 4P FFC kit ).
Please order it from Denon Official Service Distributor in your region if necessary.
8U-210100S : WRITING KIT : 1 Set
(Refer to 55 page.)
11
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
TOP COVER
FRONT PANEL ASSY BACK CHASSIS
Refer to "DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
PCB FRONT HDMI ASSY
(Ref. No. of EXPLODED VIEW : P1) PCB MX PORT/PCB RS232C
PCB USB ASSY (AVR-X2000E3 only)
(Ref. No. of EXPLODED VIEW : P2) PCB SMPS
Refer to "DISASSEMBLY
PCB FRONT ASSY Refer to "DISASSEMBLY
2. PCB MX PORT/PCB RS232C"
(Ref. No. of EXPLODED VIEW : P3) 6. PCB SMPS"
and "EXPLODED VIEW"
PCB FUNCTION ASSY and "EXPLODED VIEW"
PCB RS232C ASSY
(Ref. No. of EXPLODED VIEW : P4) PCB SMPS ASSY
(Ref. No. of EXPLODED VIEW : P14)
PCB CNT ASSY (Ref. No. of EXPLODED VIEW : P8)
PCB MX PORT ASSY
(Ref. No. of EXPLODED VIEW : P5) (Ref. No. of EXPLODED VIEW : P15)
PCB F/H_GUIDE ASSY
(Ref. No. of EXPLODED VIEW : P6)
PCB HDMI POWER TRANS MAIN
Refer to "DISASSEMBLY Refer to "DISASSEMBLY
RADIATOR ASSY 3. PCB HDMI" 4. POWER TRANS MAIN"
Refer to "DISASSEMBLY and "EXPLODED VIEW" and "EXPLODED VIEW"
7. RADIATOR ASSY" PCB HDMI ASSY POWER TRANS
and "EXPLODED VIEW" (Ref. No. of EXPLODED VIEW : P13) (Ref. No. of EXPLODED VIEW : 13)
PCB AMP ASSY
(Ref. No. of EXPLODED VIEW : P7)
PCB GUIDE R PCB VIDEO ASSY
(Ref. No. of EXPLODED VIEW : P17) Refer to "DISASSEMBLY
PCB TOP_GUIDE 5. PCB VIDEO ASSY"
(Ref. No. of EXPLODED VIEW : P18) and "EXPLODED VIEW"
PCB MAIN ASSY
(Ref. No. of EXPLODED VIEW : P9)
PCB INPUT ASSY
(Ref. No. of EXPLODED VIEW : P10)
PCB FRONT CNT ASSY
(Ref. No. of EXPLODED VIEW : P11)
PCB VIDEO ASSY
(Ref. No. of EXPLODED VIEW : P12)
12
About the photos used for "descriptions of the DISASSEMBLY" section
• The shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
• Refer to the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.
• The photograph is AVR-E400 E3 model.
The viewpoint of each photograph
(Shooting direction)
Shooting direction: B
Front side
［View from the top］
Shooting direction: C Shooting direction: D
Shooting direction: A
13
1. FRONT PANEL ASSY
Cautions when replacing the FRONT PANEL (Only AVR-X2000E3)f
Depending on when the model was manufactured, there may be washers in the FRONT PANEL screw positions. Washers
are not used in the replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the
washers.
This caution does not apply to models that are not originally fitted with washers.
Proceeding : TOP COVER → FRONT PANEL ASSY
(1) Remove the screws.
View from the bottom
(2) Disconnect the connector wires and FFC. Remove the screws.
STYLE PIN : Loosen CP4400
STYLE PIN : Loosen
FFC
N2801 FFC
Please refer to "EXPLODED VIEW" for the disassembly method of each P.W.B included in FRONT PANEL ASSY.
14
2. PCB MX PORT/PCB RS232C (AVR-X2000E3 only)
Proceeding : TOP COVER → BACK CHASSIS → PCB RS232_CNT(AVR-X2000E3 only)
→ PCB RS232C(AVR-X2000E3 only)
(1) Remove the screws.
Shooting of photograph: A
(2) Disconnect the connector board.
Board to board
PCB RS232_CNT
PCB RS232
Please refer to "EXPLODED VIEW" for the disassembly method of PCB RS232_CNT/PCB RS232.
15
3. PCB HDMI
Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI
(1) Remove the screws.
Shooting of photograph: A
(2) Cut the wire clamp band, then disconnect the connector wires and FFC. Disconnect the connector board.
cut FCC N3405 N3601 FCC
cut
STYLE PIN : Loosen
N2801
Board to board
Board to board
16
4. POWER TRANS MAIN
Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI → POWER TRANS MAIN
(1) Disconnect the connector wires, then remove the screws.
STYLE PIN : Loosen
CP4400
CP5003
cut
CP4142
CP4000 PCB VIDEO
5. PCB VIDEO ASSY
Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI → PCB VIDEO ASSY → PCB INPUT ASSY
(1) Disconnect the connector board.
PCB INPUT
PCB VIDEO
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB.
17
6. PCB SMPS
Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI → PCB VIDEO ASSY → PCB INPUT ASSY
→ PCB FRONT CNT → PCB MAIN → PCB SMPS
(1) Remove the screws.
View from the bottom
(2) Disconnect the connector wire.
PCB FRONT CNT
CP5003
18
(3) Disconnect the connector wires, then remove the screws.
CP4001 CP4000 CP403 CP405
PCB MAIN POWER TRANS CP4142
(4) Remove the screw.
PCB SMPS
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB.
19
7. RADIATOR ASSY
Proceeding : TOP COVER → RADIATOR ASSY
(1) Remove the screws.
View from the bottom
(2) Cut the wire clamp band, then disconnect the connector wires and FFC.
STYLE PIN : Loosen CP402 CP403 CP405
cut
CP401
N3405
FFC
N2801 FFC
20
(3) Remove the screws.
Shooting direction: C Shooting direction: D
CP4400
STYLE PIN : Loosen
Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in RADIATOR ASSY.
21
SPECIAL MODE
Special mode setting button (for E400E3 model)
b No.1 - 5 , 7 : Press the "Power operation (X)" button to turn on the power while pressing both the buttons A, B and the button C at
the same time.
b No.6 , 8 : Turn on the power, then press and hold down the A and B buttons for over 3 seconds.
b No.9 : Turn on the power, then press and hold down the A and B buttons for over 10 seconds.
No. Mode Button A Button B Button C Contents
Firmware versions such as Main or DSP are
Version display
1 STATUS DIMMER – displayed in the FL Display. Errors are displayed
(μcom/DSP Error Display)
when they occur. (Refer to 24 page)
User Initialization mode
SOURCE SOURCE Backup data initialization is carried out.
2 (Installer Setup settings are not –
SELECT 1 SELECT 0 (Installer Setup settings are not initialized.)
initialized.)
Factory Initialization mode
ZONE2 Backup data initialization is carried out.
3 (Installer Setup settings are also DIMMER –
SOURCE (Installer Setup settings are also initialized.)
initialized.)
Selects to reject operations through panel buttons
PANEL/REMOTE LOCK Selection ZONE2 SOURCE
4 – and the master volume knob on the main unit and
mode SOURCE SELECT 1
operations via the remote control.
ZONE2 Selects the “Diagnostic mode” or “Displaying the
5 Service Related Selection mode DIMMER STATUS
SOURCE protection history mode”.
When using multiple DENON AV receivers in the
6 Remote ID Setup mode STATUS DIMMER – same room, make this setting so that only the desired
AV receiver operates. (Refer to 50 page)
SOURCE ZONE2 Turns the power on with the Protection detection
7 Protection pass mode STATUS
SELECT 0 SOURCE disabled.
SOURCE SOURCE
8 DM860A Reboot mode Restarts DM860.
SELECT 1 SELECT 0
ZONE2
9 NETWORK Initialization mode DIMMER – Initializes NETWORK related settings.
SOURCE
X DIMMER
ZONE2 SOURCE STATUS
SOURCE SELECT 0 SOURCE SELECT 1
22
Special mode setting button (for X2000 model)
b No.1 - 5, 7 - 9 :Press the "Power operation (X)" button to turn on the power while pressing both the buttons A, B and the button C at
the same time.
b No.6 ,10 : Turn on the power, then press and hold down the A and B buttons for over 3 seconds.
b No.11 : Turn on the power, then press and hold down the A and B buttons for over 10 seconds.
No. Mode Button A Button B Button C Contents
Firmware versions such as Main or DSP are
Version display
1 STATUS DIMMER – displayed in the FL Display. Errors are displayed
(μcom/DSP Error Display)
when they occur. (Refer to 24 page)
User Initialization mode TUNER TUNER
Backup data initialization is carried out.
2 (Installer Setup settings are not PRESET CH PRESET CH –
(Installer Setup settings are not initialized.)
initialized.) + –
Factory Initialization mode
ZONE2 Backup data initialization is carried out.
3 (Installer Setup settings are also DIMMER –
SOURCE (Installer Setup settings are also initialized.)
initialized.)
TUNER Selects to reject operations through panel buttons
PANEL/REMOTE LOCK Selection ZONE2
4 PRESET CH – and the master volume knob on the main unit and
mode SOURCE
+ operations via the remote control.
ZONE2 Selects the “Diagnostic mode” or “Displaying the
5 Service Related Selection mode DIMMER STATUS
SOURCE protection history mode”.
When using multiple DENON AV receivers in the
6 Remote ID Setup mode STATUS DIMMER – same room, make this setting so that only the desired
AV receiver operates. (Refer to 50 page)
Mode for switching tuner frequency TUNER
7 step PRESET CH DIMMER – Change tuner frequency step to FM:50kHz/200kHz
(E2 model Only) +
Access the Remote Maintenance mode via the
TUNER
Installer Setup mode ZONE2 internet.Installer Setup is displayed on GUI/Option
8 PRESET CH –
(AVR-X2000E3 model only) SOURCE Menu.
-
b Refer to AVR_RemoteMaintenance_.pdf of SDI.
TUNER
ZONE2 Turns the power on with the Protection detection
9 Protection pass mode STATUS PRESET
SOURCE disabled.
CH –
TUNER TUNER
10 DM860A Reboot mode PRESET CH PRESET CH Restarts DM860.
+ –
ZONE2
11 NETWORK Initialization mode DIMMER – Initializes NETWORK related settings.
SOURCE
X DIMMER
ZONE2 SOURCE STATUS
TUNER PRESET CH + TUNER PRESET CH -
23
1. µcom/DSP Version display mode
1.1. Operation specifications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "Power operation (X)" button to turn on the power while pressing the "STATUS" and "DIMMER" buttons.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
b When the version is displayed on the FL Display, the version list is also displayed on the GUI.
1.2. Display Order
Error information(Refer to 1.3. Error display) → q Model destination information → w Firmware Package Version
→ e Main µ-com → r Main 1st Boot Loader → t DSP ROM → y Audio PLD → u GUI SFLASH
→ i Ethernet(DM860A) 1st Boot Loader, Hardware ID → o Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag
→ Q0 Ethernet(DM860A) IMAGE → Q1 Ethernet(DM860A)MAC ADDRESS information
q Model destination information :
Model FLD
AVR-E400 E3 model A V R - E 4 0 0 _ E 3
AVR-X2000CI E3 model A V R - x 2 0 0 0 _ E 3
AVR-X2000 E2 model A V R - x 2 0 0 0 _ E 2
AVR-X2000 E1C model A V R - x 2 0 0 0 _ E 1 C
w Firmware Package Version :
FLD P a c k a g e : * * * *
e Main µ-com :
FLD M a i n : * * * * * * * *
r Main 1st Boot Loader :
FLD M a i n F B L : * * . * *
t DSP ROM :
FLD D S P : * * . * *
y Audio PLD :
FLD A u d i o P L D : * * . * *
u GUI SFLASH :
Model FLD
AVR-E400 E3 model G U I : 6 4 1 8 * * * *
AVR-X2000CI E3 model G U I : 6 4 1 1 * * * *
AVR-X2000 E2 model G U I : 6 4 1 2 * * * *
AVR-X2000 E1C model G U I : 6 4 1 5 * * * *
24
i Ethernet(DM860A) 1st Boot Loader, Hardware ID :
FLD E t h e r n e t F B L
Press the "STATUS" button.
FLD * * * * * * - b d
o Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag :
FLD E t h e r n e t S B L
Press the "STATUS" button.
FLD * * * * * * * * * * * * * - 0 A
Q0 Ethernet(DM860A) IMAGE :
FLD E t h e r n e t I M G
Press the "STATUS" button.
FLD * * * * * * * * * * * * *
Q1 Ethernet(DM860A)MAC ADDRESS information :
FLD * E t h e r n e t M A C
Press the "STATUS" button.
FLD * * * * * * - * * * * * *
25
1.3. Error display
See the following table for each "Error information" display and its explanation (status).
Display order is q,w,e,r,t.
Condition Status FL Display Trouble shooting
•Please check the
Compared with the destination setting destination-resistors
q on the board. This is displayed when the (R3017/R3018, HDMI
Firm Check model name or destination information F I R M E R R O R B'D).
NG written into the firmware does not match. •Please write the
(b) firmware of correct
destination.
•Please check
w
No response from DIR. D I R E R R O R 0 1 DIR(U2203, HDMI B'D)
DIR NG
and around circuits.
When DSP code boot is performed, the
DSP FLAG0 port does not change to "H" D S P E R R O R 0 1
even if DSP reset is executed.
Before DSP command is issued, the DSP
BUSY port does not change to "L".
D S P E R R O R 0 2
When DSP data read is performed,
executing WRITE="L" does not result in D S P E R R O R 0 3
ACK="H". •Please check
e DSP(U2001, HDMI
DSP NG When DSP data read is performed, B'D) and around
executing REQ="L" does not result in D S P E R R O R 0 4 circuits.
ACK="L".
When DSP data writing is performed,
executing WRITE="H" does not result in D S P E R R O R 0 5
ACK="H".
When DSP data writing is performed,
executing REQ="L" does not result in D S P E R R O R 0 6
ACK="L".
An error occurred in testing writing data •Please check IP
between IP SCALER and DRR.
I P S C A L E R E R R 0 1 SCALER (U1601,
r
IP SCALER HDMI B'D) and
NG Testing writing data between IP SCALER DDR2(U1801/1802)
and DRR resulted in no response.
I P S C A L E R E R R 0 2
and around circuits.
t Error occurs in EEPROM checksum.(*** is
EEPROM NG a block address number.)
E 2 P R O M E R R * * *
Status FL Display
b M a i n : * * * * * * * *
–
The written Firmware and product settings
(model name, brand name, destination) D S P : * * . * *
–
are compared. If Firmware that is not
designed for this product is written, d or f A u d i o P L D : * * . * *
–
is displayed in the first column, as shown
on the right. G U I : * * * * * * * *
–
G U I : * * * * * * * *
•
26
1.4. Version display on the Setup Menu
Use the following procedure to display the firmware version.
(1) Press the "SETUP" button on the remote control.
(2) Select "General-Information-Firmware".
A version with 12 digits is displayed as shown in the following image.
e
General/Firmware e
Version 8300-9884-5401
Displays system information
GUI Image
The displayed 12 digits are derived from each device version as shown below.
The 6th digit from the right for Main μcom
The 5th digit from the right for Main μcom
The 2nd digit from the right for Main μcom
The 1st digit from the right for Main μcom
The 1st digit from the right for DSP
The 1st digit from the right for A.PLD
Mainμcom 0 0 2 3 0 0 1 6 Info display 5 2 0 0 - 3 2 6 1 - 6 0 8 5
DSP 8 2 0 2
A.PLD 2 2 0 5
GUI 6 4 1 1 0 0 0 6 The 1st digit from the right for GUI
DM860 FBL 0 9 0 3 1 1 The 2nd digit from the right for GUI
DM860 SBL B 2 0 1 2 0 9 2 1 0 5 4 6
DM860 IMG I 2 0 1 2 1 0 2 2 0 9 5 8
The 1st digit from the right for IMG
The 2nd digit from the right for IMG
b This firmware version No. (xxxx-xxxx-xxxx) is included in the service contact document.
These 12 digits are also included in the document.
27
2. PANEL/REMOTE LOCK Selection mode
2.1. Behavior specifications
In this mode, you can switch between the PANEL LOCK MODE and the Mode for preventing remote control acceptance.
2.2. Starting up
Press the "Power operation (X)" button to turn on power while pressing the "ZONE2 SOURCE" and "TUNER PRESET
CH +" buttons.
Press the "TUNER PRESET CH +" button ("SOURCE SELECT 1" button for AVR-E400) to select the mode and the
"STATUS" button to confirm the selection.
2.3. Mode selection method and how each mode is displayed
Each time you press the "TUNER PRESET CH +" ("SOURCE SELECT 1" button for AVR-E400) button, the mode
displayed on the FL DISPLAY changes.
While the desired mode name is displayed on the FL DISPLAY, press the "STATUS" button. The set is restarted and the
selected mode takes effect.
The currently set item is marked with "b".
q
FLD F P / V O L L O C K O n
Operations using the main unit panel buttons and the master
volume knob are rejected.
w
FLD F P L O C K O n
Operations using the main unit panel buttons are rejected.
e
FLD F P L O C K * O f f
Panel lock mode is cancelled.
r
FLD R C L O C K O n
Operations using the remote control are rejected.
t
FLD R C L O C K * O f f
RC lock mode is cancelled.
28
3. Service Related Selection mode
3.1. Behavior specifications
In this mode, you can switch between the Diagnostic mode (SERVICE CHECK), the Displaying the protection mode
(PROTECTION) and the 232C clear mode (RS232C RESET).
3.2. Starting up
Press the "Power operation (X)" button to turn on power while pressing the "ZONE2 SOURCE", "DIMMER" and
"STATUS" buttons.
Press the "TUNER PRESET CH +" button ("SOURCE SELECT" button for AVR-E400) to select the mode and press the
"STATUS" button to restart the set and make the setting take effect.
q
FLD 1 . S E R V I C E C H E C K
This mode is used for confirming the Video and Audio (signal) paths.
(Diagnostic mode)The signal paths of the set can be easily confirmed
after repair.
w
FLD 2 . P R O T E C T I O N
The protection history can be checked.
e AVR-X2000E3 Only
FLD 3 . R S 2 3 2 C R E S E T
The 232C standby mode is changed to the Normal standby mode.
r
FLD 4 . 0 P I N F O
The operation information about the set can be checked.
3.3. Canceling diagnostic mode
Turn off the power by pressing the "Power operation (X)" button.
29
3.4. DIAGNOSTIC MODE (Video/Audio (signal) path confirmation mode
3.4.1. Specification
This mode is used for confirming the Video and Audio (signal) paths. (Troubleshooting)
Confirming the operation of unit can be easily done after repair.
Backup data will not be lost.
3.4.2. Starting diagnostic mode
Press the "Power operation (X)" button to turn on power while pressing the "ZONE2 SOURCE" and "DIMMER" and "STATUS" buttons.
Select "1. SERVICE CHECK" and press "STATUS" to start the set in the Diagnostic mode.
In this mode, TUNED, STEREO and RDS are lit in FL display.
3.4.3. Canceling diagnostic mode
Turn off the power by pressing the "Power operation (X)" button.
3.4.4 Selecting items
Press q button to switch between video items and audio items.
Press w or e button to select previous or next items.
This unit remote controller
q w e q w e
audio ⇔ video previous next audio ⇔ video previous next
DIMMER QUICK SELECT 1 QUICK SELECT 2 SLEEP CURSOR LEFT CURSOR RIGHT
3.4.5 Video system confirmation items
fig. XX: Refer to the block diagram of the fig.XXth.
Confirmation item FL display settings Contents of confirmationRemarks
video convert V02:V.CONVERT Input Source : CBL/SAT ·CVBS input ⇒ IP Scaler ⇒ HDMI output
(analog or HDMI ⇒ HDMI) fig.1 Video Convert(IP Scaler) : ON, All sources ·Component input ⇒ IP Scaler ⇒ HDMI output
IP Scaler : "Analog&HDMI", All sources ·HDMI input ⇒ IP Scaler ⇒ HDMI output
1
Resolution : "Auto", All sources ·ETHERNET input ⇒ IP Scaler ⇒ HDMI output
MAIN ZONE ON (* Input source can be switched.)
ZONE2 OFF
HDMI pass V03:HDMI PASS Input Source : CBL/SAT ·HDMI input ⇒ HDMI output
(Main) fig.2 Source of Video Convert(IP Scaler) : OFF, All sources ·Front HDMI input ⇒ HDMI output
2
MAIN ZONE ON (* Input source can be switched.)
ZONE2 OFF
HDMI CEC V04:HDMI CEC Input Source : CBL/SAT ·When the power supply of a TV is put in the standby mode, make sure that the
HDMI Control : ON power supply of this unit is also put in the standby mode.
3
fig.3 MAIN ZONE ON ·To check ARC path, switch the input source to "TV AUDIO".
ZONE2 OFF (* Input source can be switched.)
HDMI audio V05:H.AUDIO-AVR Input Source : CBL/SAT ·HDMI input(PCM , DolbyDigital , DTS) ⇒ Speaker output
(audio: AVR) HDMI Control : OFF ·HDMI input(HD audio) ⇒ Speaker output
4 fig.4 HDMI Audio : AVR (* Input source can be switched.)
HDMI audio V06:H.AUDIO-TV HDMI Audio : TV ·HDMI input(PCM , DolbyDigital , DTS) ⇒ HDMI output (audio output from
(audio: TV) connected TV)
5
fig.5 (* Input source can be switched.)
GUI menu V07:GUI MENU ON Input Source : CBL/SAT ·GUI display ⇒ HDMI output
Video Convert(IP Scaler) : ON, All sources (* Input source can be switched.)
IP Scaler : "Analog&HDMI", All sources
6 Resolution : "AUTO", All sources
Setup Menu ON
MAIN ZONE ON
fig.6
ZONE2 OFF
30
3.4.6 Audio system confirmation items
fig. XX: Refer to the block diagram of the fig.XXth.
Confirmation item FL display settings Contents of confirmationRemarks
analog pass A01:ANALOG PASS Input Source: CBL/SAT ·Analog input ⇒ Speaker output
fig.7 Input Mode: ANALOG(fixed) (* Input source can be switched.)
Sound mode: DIRECT
1
Amp assign: Surround Back
MAIN ZONE: ON
ZONE2: OFF
digital A02:DIGITAL Input Source : CBL/SAT ·Digital input ⇒ Speaker output
fig.8 Input Mode : DIGITAL(fixed) (* Input source can be switched.)
Sound mode: MULTI CH STEREO
2 Amp assign : Surround Back
Speaker Config:
all Speakers =Small
SW=Yes
digital A03:DIGITAL-Z2 Input Source : NETWORK(fixed) ·Digital(PCM) input ⇒ Speaker output
(ZONE2) Input Mode : Auto (ZONE2 L, R )
Sound mode: STEREO ·Digital(PCM) input ⇒ Preout output
3 fig.9 Amp assign : ZONE2 (ZONE2 L, R)
MAIN ZONE: ON
ZONE2: ON
HDMI A05:HDMI Input Source : CBL/SAT ·HDMI input ⇒ Speaker output
Input Mode : HDMI(fixed) (* Input source can be switched.)
fig.10 Sound mode: STEREO
4
Amp assign : Surround Back
MAIN ZONE: ON
ZONE2: OFF
analog A/D A06:AD Input Source : CBL/SAT ·Analog input ⇒ Speaker output
(MAIN) Input Mode : Analog(fixed) ·Analog input ⇒ Pre OUT (SW)
Sound mode: MULTI CH STEREO (* Input source can be switched.)
fig.11
5 Amp assign : Surround Back
Speaker Config:
all Speaker=Small/ SW=Yes
MAIN ZONE: ON
analog amp assign A07:ASSIGN-Z2 Input Source : CBL/SAT ·Analog input ⇒ Speaker output
(Amp assign: ZONE2) fig.12 Input Mode : Auto ·Analog input ⇒ Pre OUT (ZONE2) AVR-X2000 only
Sound mode: STEREO (* Input source can be switched.)
6 Z2 Source : Source
Amp assign : ZONE2
MAIN ZONE: ON
ZONE2: ON
analog amp assign A11:ASSIGN-BiAMP Input Source : CBL/SAT ·Analog input ⇒ Speaker output
(amp assign: bi-amp) fig.13 Input Mode : Auto (* Input source can be switched.)
(AVR-X2000 only) Sound mode: MULTI CH STEREO
7
Amp assign : Bi-Amp
MAIN ZONE ON
ZONE2 OFF
front height A14:FRONT HEIGHT Input Source : CBL/SAT ·Analog input ⇒ Speaker output
fig.14 Input Mode : Auto (* Input source can be switched.)
Sound mode: MULTI CH STEREO
8
Amp assign : Front Height
MAIN ZONE ON
ZONE2 OFF
31
BLOCK DIAGRAM
fig1 : analog or HDMI ⇒ HDMI
MX25L12836EMI-10G 128M
HDMI1
OSD
HDMI2
TMDS IN
TMDS SW
HDMI3 ADV3002
HDMI Rx
HDMI IN TMDS IN
VIDEO DECODER TMDS OUTPUT HDMI i/p Scaler_TX_OSD TMDS OUTPUT
HDMI4 ADV7850 OUT1 HDMI OUT1
ADV8003-3
TMDS IN
HDMI5
TMDS IN
HDMI6
K4T51163QJ K4T51163QJ
FRONT HDMI ADV8195
BUFFER
COMP1-Y 2V
COMP2-Y
COMP1-Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y
Y
COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
USBD+/-
USB DM860
INPUT SELECT
MM74HC4051
IN1
CVBS IN
IN2 BD7628
32
fig2 : HDMI Pass (Main)
MX25L12836EMI-10G 128M
HDMI1
OSD
HDMI2
TMDS IN
TMDS SW
HDMI3 ADV3002
HDMI Rx
HDMI IN TMDS IN
VIDEO DECODER TMDS OUTPUT HDMI i/p Scaler_TX_OSD TMDS OUTPUT
HDMI4 ADV7850 OUT1 HDMI OUT1
ADV8003-3
TMDS IN
HDMI5
TMDS IN
HDMI6
K4T51163QJ K4T51163QJ
FRONT HDMI ADV8195
BUFFER
COMP1-Y 2V
COMP2-Y
COMP1-Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y
Y
COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
USBD+/-
USB DM860
INPUT SELECT
MM74HC4051
IN1
CVBS IN
IN2 BD7628
33
fig3 : HDMI CEC
MX25L12836EMI-10G 128M
OSD
TMDS IN
HDMI Rx
HDMI IN TMDS IN
VIDEO DECODER TMDS OUTPUT HDMI i/p Scaler_TX_OSD TMDS OUTPUT
ADV7850 OUT1 HDMI OUT1
ADV8003-3
TMDS IN
uCOM
TMDS IN
K4T51163QJ K4T51163QJ
COMP1-Y 2V
COMP2-Y
COMP1-Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y
Y
COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
USBD+/-
USB DM860
INPUT SELECT
MM74HC4051
IN1
CVBS IN
IN2 BD7628
34
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig4 : HDMI audio (audio: AVR)
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
C ZONE2 VOLUME CONTROL
7.1CH SW
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
35
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig5 : HDMI audio (audio: TV)
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
36
fig6 : GUI menu
MX25L12836EMI-10G 128M
HDMI1
OSD
HDMI2
TMDS IN
TMDS SW
HDMI3 ADV3002
HDMI Rx
HDMI IN TMDS IN
VIDEO DECODER TMDS OUTPUT HDMI i/p Scaler_TX_OSD TMDS OUTPUT
HDMI4 ADV7850 OUT1 HDMI OUT1
ADV8003-3
TMDS IN
HDMI5
TMDS IN
HDMI6
K4T51163QJ K4T51163QJ
FRONT HDMI ADV8195
BUFFER
menu
COMP1-Y 2V
COMP2-Y
COMP1-Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y
Y
COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
USBD+/-
USB DM860
INPUT SELECT
MM74HC4051
IN1
CVBS IN
IN2 BD7628
37
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig7 : Analog (signal) pass
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
C ZONE2 VOLUME CONTROL
7.1CH SW
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
38
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig8 : Digital (MAIN)
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
39
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig9 : digital (ZONE2)
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
40
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig10 : HDMI
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
MCLK
SLRCK
SBCK
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS
DIRC2
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
DIRARC
DIRRXSPDIF
ADINL
DIR860SPDIF
ADINL
ADINR
Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
FRONT V.AUX
INPUT OTHER AVR C
PREOUT
TUNER SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
MIC(Mini Jack)
SL
M-Xport OTHER AVR
SR
SBL
SBR
OTHER AVR
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
41
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig11 : analog A/D (MAIN)
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
42
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig12 : Amp assign: ZONE2
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
43
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig13 : amp assign: bi-amp
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM AVR
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
44
HDMI1 HDMI
HDMI RECEIVER
ADV7850
fig14 : front height
SWITCHER
I2C/SPDIF
HDMI2 ADV3002
4
I2S RXI2S
RXMCLK 4 HDMI OUT1
HDMI3 S/PDIF RX64FS ADV8003-3
RXFS HDMI TRANSCEIVER
OUTPUT MUX
DSD
HDMI IN HDMI4
RXSPDIF
HBR
HDMI5
MCLK
AVR-X2000 / OTHER AVR HDMI6
ADV8195 SCLK
FRONT TMDS
HDMI BUFFER
DIN_FLFR
DIN_CSW HEADPHONE OUT
DIN_SLSR
DIN_SBLSBR ATT
DIN_MCK H/P-L
DIN_64FS
FLASH H/P-R
DIN_FS
DIN_SBLSBR
FL
DSPOUT_64FS FL
COAX / OPT IN DSPOUT_FS
AVR_E400 & X2000 E3 : 1 / 1
DSPFATAF SDRAM
OTHER AVR : 2 /2
AVR_X2000 E2/E1C/K : 2 /0 DSPFATAC FR
DSPFATAS FR
DSPFATASB
C
C
MCLK
SLRCK SPK OUT
SBCK SL
ETHERNET ETHERNET
PHY
NETWORK
CONTROLLER
DIR_DATA SL
DIR_FS
LAN8720 DM860A DIRC1
DIR_64FS
DIR_256FS SR
DIRC2 SR
DIR_RERR
DACDATAF
DAC_FS
DACDATAC
DAC_256FS
DAC_64FS
DACDATAS
DACDATASB
DIR_AUDIO_VO MAIN ZONE DAC
I2S DIRO1
PCM1690
USB FRONT DIRO2
ADINR
SBL
DIRARC SBL(FL-B/FL-H/BI-AMP/ZONE)
DIRRXSPDIF
ADINL
DIR860SPDIF
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ADINL
ADINR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR C
DSP_SW PREOUT
TUNER EXT_SW SW1
AVR_E400 / X2000 : 0.1ch
E3 : FM/AM OTHER AVR : 7.2ch
E2/E1C/K : FM only
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
M-Xport OTHER AVR
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
ZONE2 OUT
FR AVR_E400 EXCEPT
OTHER AVR
7.1CH SW ZONE2 VOLUME CONTROL
Z2R
EXT.IN SL
SR
MONO LINE ZONE2 VOLUME
SBL HPF MIX DRIVER NJW1194
SBR
AVR_N400 EXCEPT
45
3.5. Errors checking mode (Displaying the protection history)
3.5.1. Operation specifications
Error mode (Displaying the protection history):
When the set is started up in this mode, the error information is displayed.
3.5.2. About the display on the FL display
When the "STATUS" button is pressed after the error (protection history display) mode is set, a history like the one shown
below is displayed, depending on the conditions.
(1) Normal (when there has been no protection incident)
FLD N O P R O T E C T
(2) For ASO (when the last protection incident was ASO protection)
FLD P R T : A S O
Cause: The line between speaker terminals is shorted, or speakers with impedance of less than the rated value.
Supplementary information: As the excess current is detected after operation of the speaker relay, a short on the
speaker terminal and the connected speaker can be identified.
If the power is turned on without correcting the abnormality, the protection function will work about 5 seconds later and the
power supply will be shut off.
(3) For DC (when the last protection incident was DC protection)
FLD P R T : D C
Cause: DC output of the power amplifier is abnormal.
If the power is turned on without correcting the abnormality, the protection function will work about 5 seconds later and the
power supply will be shut off.
(4) For THERMAL (when the last protection incident was THERMAL(A) or THERMAL(B) protection)
FLD P R T : T H E R M A L A
FLD P R T : T H E R M A L B
Cause: The temperature of the heat sink is excessive.
If the power is turned on without correcting the abnormality, the protection function will work about 5 seconds later and the
power supply will be shut off.
b Additional causes of protection can be due to loose connections, associated components, Microprocessor, etc.
When the "STATUS" button is pressed again after the protection history as shown above is displayed, the normal display
reappears.
46
3.5.3. Clearing the protection history
There are two ways to clear the protection history, as described below.
(1) Start up the set in error (protection display) mode and display the error, then press and hold down the "DIMMER"
button for 3 seconds.
FLD P R T : D C
Press and hold down "DIMMER" button for 3 seconds.
FLD P R T : C L E A R
The above is displayed and the protection history is cleared.
FLD N O P R O T E C T
(2) Initialize. (Refer to "Initializing INTEGRATED NETWORK AV RECEIVER" 11 page)
b If you want to save a backup, perform the method in 2.3..
Warning indication by the POWER LED
If the power is turned off when a protection incident has been detected, the POWER LED (red) flashes as a warning
according to the conditions in which the protection incident occurred.
(1) ASO/DC PROTECTION : Flashes at intervals of 0.5 seconds (0.25 seconds lit, 0.25 seconds off)
(2) THERMAL (A/B) PROTECTION : Flashes at intervals of 2 seconds (1 second lit, 1 second off)
3.6. 232C standby clear mode (AVR-X2000E3 only)
3.6.1. Operation specifications
232C standby clear mode:
This switches the 232C standby mode to the Normal standby mode.
Starting up:
Press the "STATUS" button while the following is displayed to switch to the Normal standby mode.
FLD 3 . R S 2 3 2 C R E S E T
47
3.7. Operation Info mode
3.7.1. Specifications
This mode displays the accumulated operating time, power on count, counts for each protection on the set.
3.7.2. About the display on the FL display
When the set has started in the Operation Info mode, press the "STATUS" button to display information in the following
order.
(a) Accumulated operating time
FLD O P T i m e H
↑ Time display
"STATUS"
(b) Power on count
FLD P . O n T i m e
↑Count display
"STATUS"
(c) DC /ASO Protection count
FLD D C : / A S O :
"STATUS"
(d) Thermal Protection count
FLD T H M A : / B
"STATUS"
(Returns to normal display)
48
4. Protection Pass mode
4.1. Specifications
• Turn the power on with Protection disabled.
Except for disabling the Protection detection, this operation is the same as the normal power on.
4.2. Operation
1. Press the "Power Operation (X)" button while pressing
"ZONE2 SOURCE" and "STATUS" and "TUNER PRESET CH -"
("ZONE2 SOURCE" and "STATUS" and "SOURCE SELECT 0" for AVR-E400)
buttons on the set to turn the power on.
2. The POWER ON sequence starts. The Protection detection is disabled.
FLD P r o t e c t i o n P a s s
This is displayed for 5 seconds before returning to the normal display.
5. DM860A Reboot mode
5.1. Specifications
• When DM860A is hung up, DM860A is restarted.
Even when Network standby is set (Setup Menu - Network - Network - Always ON), DM860A can be reset.
5.2. Operation
1. Turn on MAIN ZONE button, and select NETWORK for the input source.
2. Press and hold the "TUNER PRESET CH +" and "TUNER PRESET CH -" buttons
("SOURCE SELECT 1" and "SOURCE SELECT 0 " for AVR-E400) for 3 seconds and longer.
3. DM860A is restarted and returns to the normal display.
FLD N e t w o r k R e s t a r t
NOTE:
The same operation cannot be accepted for one minute after the last 860 Reboot.
49
6. Remote ID Setup mode
6.1. Specifications
When using multiple DENON AV receivers in the same room, make this setting so that only the desired AV receiver
operates.
6.2. Setting the AV receivers
Starting up:
Turn on the power, then press and hold down the "STATUS" and "DIMMER" buttons for over 3 seconds.
(1) When Remote ID Setup mode is started, the following is displayed.
FLD R E M O T E I D ?
(2) Press the "QUICK SELECT 1 - 4" button that corresponds to the number you want to set.
Button FL Display
QUICK SELECT 1 R E M O T E I D 1
QUICK SELECT 2 R E M O T E I D 2
QUICK SELECT 3 R E M O T E I D 3
QUICK SELECT 4 R E M O T E I D 4
(3) Turn off the power using "Power operation (X)" button.
(4) Turn on the power using "Power operation (X)" button.
b When Remote ID Setup mode is running, operations other than the "QUICK SELECT 1 - 4" buttons or "Power
operation (X)" buttons on the main unit are not received.
b For the remote control that is supplied with this unit, you cannot change the REMOTE ID.
NOTE:
If the IDs do not match, "AVAMPz" (z is the main unit's remote control ID) appears on the display when the remote control
unit is operated.
7. NETWORK Initialization mode
7.1. Behavior specifications
Initializes NETWORK related settings.
(1) Favorites
(2) Favorites Station
(3) Presets
(4) Internet Radio Recently Played
(5) Flickr contacts
(6) User ID
(7) Resume Playback station
50
7.2. Starting up
q Turn on the power and switch to NETWORK FUNCTION.
w Wait until ”No Network Connection” or ”Favorites” is displayed on FLD.
e Press and hold "ZONE2 SOURCE" and "DIMMER".
r When “Initializing” is displayed on FLD, release the buttons.
If it is not displayed within 15 seconds, try again from Step e.
t Wait until ”No Network Connection” or ”Favorites” is displayed on FLD.
y Press the "Power operation (X)" button to turn off and on the power.
q
FLD N E T W O R K
w
FLD N o N e t w o r k NETWORK not connected.
FLD F a v o r i t e s NETWORK connected.
ePress and hold "ZONE2 SOURCE" and "DIMMER".
r
FLD I n i t i a l i z i n g . . .
t
FLD N o N e t w o r k NETWORK not connected.
FLD F a v o r i t e s NETWORK connected.
y
FLD N E T W O R K
51
JIG FOR SERVICING
When you repair the printing board, you can use the following JIG (Extension cable kit).
Please order it from DENON Official Service. Distributor in your region if necessary.
NOTE: The incorrect connection with in the JIG (EXTENSION UNIT KIT) may cause damage.
• Connection of PCB HDMI JIG
-Preparation-
8U-110084S : EXTENSION UNIT KIT : 1Set
8U-110136S : EXTENSION UNIT KIT : 1Set
Insulation sheet (Do not supply it) : 1 sheet
Ground lead (Do not supply it) : 2 pc
-Procedures-
(1) Remove the screws.
(2) Disconnect the connector board.
Board to board PCB HDMI
Board to board
52
Board to board
PCB VIDEO
(3) Detach PCB HDMI from the chassis, and turn it over.
Please put an insulation sheet that is larger than PCB HDMI under PCB.
b Connect the ground point of PCB to the chassis with a ground lead or the like.
PCB HDMI PCB VIDEO
Insulation sheet
CHASSIS-HDMI CONNECTOR
CHASSIS-COMPOSIT CONNECTOR
53
(4) Connect the Nine extension jig cables.
PCB HDMI
1 2
PCB FRONT CNT
PCB HDMI
4 5
PCB INPUT
PCB VIDEO
6 7 8
PCB FRONT CNT
PCB VIDEO
PCB FRONT CNT
Connection table of Board to Board
No. Pin Ref. No. PCB Ref. No. PCB
q 13pin CP3404 FRONT CNT N3404 HDMI
w 13pin CP3401 FRONT CNT N3401 HDMI
e 25pin CP4200 INPUT PCB N3407 HDMI
r 7pin CP4203 INPUT PCB N3406 HDMI
t 31pin CP4201 INPUT PCB N3403 HDMI
y 7pin CP5004 FRONT CNT CN5004 VIDEO
u 13pin CP5001 FRONT CNT CN5001 VIDEO
i 13pin CP5000 FRONT CNT CN5000 VIDEO
o 9pin CP4204 INPUT CN5003 VIDEO
54
WHEN THE MICROPROCESSOR IS REPLACED WITH A NEW ONE
When the U-PRO (Microprocessor) or the Flash ROM is replaced, confirm the following.
After
PCB Name Ref. No. Description Remark
replaced
HDMI U3002 R5F56108VNFP D SOFTWARE: Main
HDMI U2003 MX29LV160DBTI B SOFTWARE: DSP ROM
HDMI U2205 5M80ZT100C5N B SOFTWARE: AUDIO PLD
HDMI U2603 H27U1G8F2BTR D SOFTWARE: DM860A ROM
HDMI U1602 MX25L12836EMI-10G D SOFTWARE: GUI ROM
After replacing
A : Mask ROM (With software). No need for write-in of software to the microprocessor.
B : Flash ROM (With software). Usually, no need for write-in of software. But, when the software was updated, you should
write the new software on the microprocessor or flash ROM. Please check the software version.
C : Empty Flash ROM (Without software). You should write the software on the microprocessor or flash ROM.
Refer to "Update procedure" or "writing procedure", when you write the software.
D : Flash ROM (With software). But you should write to the latest version of each region.
PROCEDURE FOR UPGRADING THE VERSION OF THE FIRMWARE
NOTE: When the following are replaced, always rewrite with updated firmware using DFW. (Refer to parts list of "HDMI
PCB UNIT ASS'Y" (See the part list in Excel format.)
• PCB HDMI ASSY
• U3002 (R5F56108VNFP)
• U2003(MX29LV160DBTI)
• U2205(5M80ZT100C5N)
• U2603(H27U1G8F2BTR)
After replacing U2603, always update the Firmware. After the update has been completed, initialize network.
（<50 page>)
• U1602(MX25L12836EMI-10G)
1. How to update by DFW
[AVR-E400E3/AVR-X2000E2 , E1 , E1C models]
1.1. Preparations before starting the operation
(1) Personal Computer (Installed "DFW_0064_AVRX2000_E400_(Rev.X.X.X).exe".
(2) RS-232C cable (9P (Male), Straight).
(3) 8U-210100S WRITING KIT.
1.2. Connection of AV receiver
(1) Confirm the power on/off switch of the AV receiver is turning off.
(2) Connect the update terminal of AV receiver with the "WRITING KIT".
(3) Connect the RS-232C cable from PC with the "WRITING KIT".
4P FFC Cable S706-709 : No Preference S702 : 3.3V
S709
S708
S707
S706
S702
This side is contacts of
flexible card cable.
RS-232C Cable
WRITING KIT
PC
55
[AVR-X2000E3 model]
1.1. Preparations before starting the operation
(1) Personal Computer (Installed "DFW_0064_AVRX2000_E400_(Rev.X.X.X).exe".
(2) RS-232C cable (9P (Male), Straight).
1.2. Connection of AV receiver
(1) Confirm the power on/off switch of the AV receiver is turning off.
(2) Connect the RS-232C cable from PC with the "RS232C Terminal of AV receiver".
RS-232C Cable
PC
[All model commonness]
1.3. Turn on the AV receiver
Operate the following. Turn on the AV receiver.
(1) Connect the power cable to the AC outlet while simultaneously pushing the ""SOURCE SELECT 0", "SOURCE
SELECT 1" and "ZONE2 SOURCE" (AVR-E400E3)" or ""TUNER PRESET CH +" and "TUNER PRESET CH –" and
"ZONE2 SOURCE" (except AVR-E400E3)" button of the front panel.
(2) Confirm the power indicator is green and "WRITTING" is displayed in the front panel.
1.4. Run the DFW
Run the "DFW_0064_AVRX2000_E400_(Rev.X.X.X).exe" on desktop of PC.
1.5. Communication check
(1) Select the serial port number of RS-232C in PC.
(2) Click the "Check Comm." button.
2
1
56
(3) When connection is good, then you can see the "Communication check OK." message.
(4) If connection is not good, then you can see the "Communication check NG" message.
Please confirm the following
(a) Check the connection of the AV receiver and PC. (refer to "1.2. Connection of the AV receiver" )
(b) Check the operation mode of the AV receiver. (refer to "1.3.Turn on the AV receiver")
(c) Check the selection of the RS-232C port number of PC.
1.6. Download the firmware
(1) Click the "Load" button.
(2) Download the firmware from the specified download source to PC.
XXX-XXXX
XXX-XXXX_WWWXXXXYYYY-ZZZZ.bin
XXX-XXXX_WWWXXXXYYYY-ZZZZ.bin
57
1.7. Complete the firmware updating
(1) Click the "Update" button.
XXXXXXX XXXXXXXX
(2) When writing of the firmware is completed, the power of AV receiver turns on automatically and you can see the
"Update completed" message.
After replacing U2603, always update the Firmware. After the update has been completed, initialize network.
（<50page)
(3) If you can’t complete the firmware update, please retry the firmware update from "1.3. Turn on the AV receiver".
1.8. Notice:
Please keep the following notice for firmware update.
(a) Keep the PC environment
(b) Avoid the communication cable from the electrical noise source.
(e.g. telephone cable, AC line, a fluorescent light)
(c) Don’t remove cable during update.
(d) Don’t turn off the power during update.
(e) Don’t run other PC application during update.
(f) Stop the resident program on PC (Virus checker and System check utility, etc.)
(g) Stop the screen saver on PC.
(h) Stop the power save ability on PC.
(i) In case of laptop PC, Use the AC adaptor.
Confirming the firmware’s number after upgraded
After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page ).
58
2. How to update by DPMS
You can update the firmware by downloading the latest version from the Internet.
2.1. Connecting to the Network
(1) System requirements
• Internet Connection by Broadband Circuit
• Modem
• Router
• Ethernet cable (CAT-5 or greater recommended)
(2) Setting
Internet
Computer
Modem LAN port/
Ethernet
connector
To WAN port
Router
To LAN port
To LAN port
ETHERNET
connector
2.2. Checking and updating the firmware
Check if the latest firmware exists. You can also check approximately time required to complete an update.
(1) Press the "SETUP" button on the remote control to display the GUI menu.
(2) Use the cursor buttons to select "General" → "Firmware" → "Update" → "Check for Update".
(3) Press the "ENTER" button.
• The latest version of the firmware on the website is displayed.
• If the firmware on the website is latest, proceed to (4).
• If the latest firmware has been already installed, press the "SETUP" button to close the menu.
(4) Use the cursor buttons to select "Start", then press the "ENTER" button.
• During update, the power indicator lights in red and the GUI screen disappears. And an approximately remaining
time is indicated on the display.
• When updating is complete the power indicator lights in green and normal status is resumed.
--- Cautions on Firmware Update ---
• In order to update the firmware, you must have the correct system requirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be
completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
59
2.3. About the error code
See the table below for error codes, details of faults, and coping strategies when the firmware is updated through DPMS
(Denon Product Management Server).
Error
Details of Error code Display Coping strategies
Code
Reset and update again.
Carry out the update in an
01 Log-in to DPMS failed. Login failed 01 environment that has little network
load.
Carry out the update in an
Line, etc., is busy when logging into
02 Server is busy02 environment that has little network
DPMS.
load.
Check the network connection.
Carry out the update in an
03 Connection to DPMS failed. ConnectionFail03 environment that has little network
load.
Check the network connection.
Firmware file data was requested Carry out the update in an
04 ConnectionFail04
but error message was received. environment that has little network
load.
Check the network connection.
Firmware file data was requested Carry out the update in an
05 ConnectionFail05
but it timed out. environment that has little network
load.
Check the network connection.
Firmware file data was requested Carry out the update in an
06 ConnectionFail06
but error message was received. environment that has little network
load.
Check the network connection.
All firmware file data was requested Carry out the update in an
07 ConnectionFail07
but it timed out. environment that has little network
load.
Check the network connection.
Firmware file data of Main CPU was
Carry out the update in an
08 requested but error message was ConnectionFail08 environment that has little network
received.
load.
Check the network connection.
Firmware file data of Main CPU was Carry out the update in an
09 ConnectionFail09
requested but it timed out. environment that has little network
load.
Check the network connection.
Error (NG) message was received
Carry out the update in an
0A when firmware of Main CPU was Download fail 0A environment that has little network
downloaded.
load.
Check the network connection.
Error (line congestion) message was
Carry out the update in an
0B received when firmware of Main Download fail 0B environment that has little network
CPU was downloaded.
load.
Check the network connection.
Error (connection failure) message
Carry out the update in an
0C was received when firmware of Download fail 0C environment that has little network
Main CPU was downloaded.
load.
Check the network connection.
Carry out the update in an
0D Received Package Version is wrong. D o w n l o a d f a i l 0 D environment that has little network
load.
Check the network connection.
Connection to DPMS failed. Carry out the update in an
0E ConnectionFail0E
(can not get NTP) environment that has little network
load.
Main CPU failed to receive firmware
Turn off and on the power. Updating
10 for rewriting sent from Updating fail 10 starts automatically.
DM860A (when timed out).
60
Error
Details of Error code Display Coping strategies
Code
Main CPU failed to receive firmware
Turn off and on the power.
11 for rewriting sent from DM860A Updating fail 11 Updating starts automatically.
(when an error occurred).
There was invalid data in the
firmware for rewriting sent from Turn off and on the power.
12 Updating fail 12
DM860A to Main CPU (when a Updating starts automatically.
Check Sum error occurred).
The deletion of block data failed Turn off and on the power.
13 Erase fail 13
before Main CPU was rewritten. Updating starts automatically.
The rewriting of block data failed Turn off and on the power.
14 Updating fail 14
when Main CPU was rewritten. Updating starts automatically.
The data verification was invalid Turn off and on the power.
15 UpdateCheckNG 15
after Main CPU was rewritten. Updating starts automatically.
Check the network connection.
Failure to acquire (Boot Loader
Carry out the update in an
20 Mode) IP address before rewriting ConnectionFail20 environment that has little network
DM860A (AutoIP).
load.
Check the network connection.
Failure to acquire (Boot Loader
Carry out the update in an
21 Mode) IP address before rewriting ConnectionFail21 environment that has little network
DM860A (when timed out).
load.
Reset and update again.
Carry out the update in an
22 Log-in to DPMS failed. Login failed 22 environment that has little network
load.
Carry out the update in an
Line, etc., is busy when logging into
23 Server is busy23 environment that has little network
DPMS.
load.
Check the network connection.
Carry out the update in an
24 Connection to DPMS failed. ConnectionFail24 environment that has little network
load.
25 Mode change failure of DM860A. ConnectionFail25 Reset and update again.
Data acquisition failed (timed out) Check the network connection.
when firmware of Main CPU was Carry out the update in an
26 Download fail 26
downloaded. Received Package environment that has little network
Version is wrong. load.
27 Mode change failure of DM860A. Download fail 27 Reset and update again.
Carry out the update in an
Log-in to DPMS failed when Main
36 Login failed 36 environment that has little network
CPU was rewritten.
load.
Line, etc., is busy when logging Carry out the update in an
37 into DPMS when Main CPU was Server is busy37 environment that has little network
rewritten. load.
Check the network connection.
Connection to DPMS failed when Carry out the update in an
38 ConnectionFail38
Main CPU was rewritten. environment that has little network
load.
61
Error
Details of Error code Display Coping strategies
Code
Check the network connection.
Connection to DPMS timed out Carry out the update in an
39 ConnectionFail39
when Main CPU was rewritten. environment that has little network
load.
Turn off and on the power.
Error (NG) message was received Updating starts automatically.
3A when firmware was downloaded Download fail 3A Carry out the update in an
or Main CPU was rewritten. environment that has little network
load.
Turn off and on the power.
Error (line congestion) message
Updating starts automatically.
received when downloading
3B Download fail 3B Carry out the update in an
firmware when Main CPU was
environment that has little network
rewritten.
load.
Turn off and on the power.
Error (connection failure) message
Updating starts automatically.
received when downloading
3C Download fail 3C Carry out the update in an
firmware when Main CPU was
environment that has little network
rewritten.
load.
Check the network connection.
Failure to acquire (Boot Loader
Carry out the update in an
3D Mode) IP address before rewriting ConnectionFail3D environment that has little network
DM860A (AutoIP).
load.
Check the network connection.
Failure to acquire (Boot Loader
Carry out the update in an
3E Mode) IP address before rewriting ConnectionFail3E environment that has little network
DM860A (when timed out).
load.
Log-in to DPMS failed when Carry out the update in an
50 firmware such as DSP and PLD was Login failed 50 environment that has little network
rewritten. load.
Line, etc., is busy when the log-in to Carry out the update in an
51 DPMS when firmware such as DSP Server is busy51 environment that has little network
and PLD was rewritten. load.
Check the network connection.
Connection to DPMS failed when
Carry out the update in an
52 firmware such as DSP and PLD was ConnectionFail52 environment that has little network
rewritten.
load.
Turn off and on the power.
Error message received regarding
Updating starts automatically.
firmware data after the log-in to
54 Updating fail 54 Carry out the update in an
DPMS when firmware such as DSP
environment that has little network
and PLD was rewritten.
load.
Turn off and on the power.
When firmware such as DSP and
Updating starts automatically.
PLD was rewritten, request was
55 Updating fail 55 Carry out the update in an
made for firmware data after the
environment that has little network
log-in to DPMS, but it timed out.
load.
Turn off and on the power.
Downloading firmware failed after Updating starts automatically.
56 the log-in to DPMS when firmware Download fail 56 Carry out the update in an
such as DSP and PLD was rewritten. environment that has little network
load.
Turn off and on the power.
Firmware download error received
Updating starts automatically.
(line congestion) after the log-in to
57 Download fail 57 Carry out the update in an
DPMS when firmware such as DSP
environment that has little network
and PLD was rewritten.
load.
Turn off and on the power.
Firmware download error received
Updating starts automatically.
(connection failure) after the log-
58 Download fail 58 Carry out the update in an
in to DPMS when firmware such as
environment that has little network
DSP and PLD was rewritten.
load.
NACK was received when "C" Turn off and on the power.
5A ConnectionFail5A
command sent to DSP, PLD etc. Updating starts automatically.
62
Error
Details of Error code Display Coping strategies
Code
NACK was received when "L" Turn off and on the power.
5B Updating fail 5B
command sent to DSP, PLD etc. Updating starts automatically.
DSP, PLD etc. failed to receive
Turn off and on the power.
5C firmware for rewriting sent from Updating fail 5C Updating starts automatically.
DM860A (when timed out).
DSP, PLD etc. failed to receive
Turn off and on the power.
5D firmware for rewriting sent from Updating fail 5D Updating starts automatically.
DM860A (when an error occurred).
Data in firmware such as DSP
and PLD for rewriting sent from Turn off and on the power.
5E Updating fail 5E
DM860A was invalid (when a Check Updating starts automatically.
Sum error occurred).
Invalid data in firmware such as DSP
and PLD for rewriting sent from Turn off and on the power.
5F Updating fail 5F
DM860A was invalid (invalid data Updating starts automatically.
was received).
NACK was received when "P" Turn off and on the power.
60 Updating fail 60
command sent to DSP, PLD etc. Updating starts automatically.
NACK was received when "I" Turn off and on the power.
61 UpdateCheckNG 61
command sent to DSP, PLD etc. Updating starts automatically.
Acquisition of serial flash data failed Turn off and on the power.
80 Updating fail 80
before serial flash was deleted. Updating starts automatically.
Deleting data failed before serial Turn off and on the power.
81 Updating fail 81
flash was rewritten. Updating starts automatically.
Receiving firmware for rewriting
Turn off and on the power.
82 serial flash sent by DM860A failed Updating fail 82 Updating starts automatically.
(when timed out).
Receiving firmware for rewriting
Turn off and on the power.
83 serial flash sent by DM860A failed Updating fail 83 Updating starts automatically.
(when an error).
Receiving firmware for rewriting
Turn off and on the power.
84 serial flash sent by DM860A failed Updating fail 84 Updating starts automatically.
(when a Check Sum error).
Receiving firmware for rewriting
Turn off and on the power.
85 serial flash sent by DM860A failed Updating fail 85 Updating starts automatically.
(when invalid data was received).
The data verification was invalid Turn off and on the power.
86 Updating fail 86
after serial flash was rewritten. Updating starts automatically.
Check the network connection.
Acquisition of (Application Mode) IP
Carry out the update in an
A0 address failed before DM860A was ConnectionFailA0 environment that has little network
rewritten (AutoIP).
load.
Check the network connection.
Acquisition of (Application Mode) IP
Carry out the update in an
A1 address failed before DM860A was ConnectionFailA1 environment that has little network
rewritten (when timed out).
load.
63
Error
Details of Error code Display Coping strategies
Code
Invalid login via DPMS access was Check the network connection.
notified when DM860A related Carry out the update in an
A2 Login failed A2
firmware was rewritten (Application environment that has little network
Mode). load.
Line congestion via DPMS access Check the network connection.
was notified when DM860A related Carry out the update in an
A3 Server is busyA3
firmware was rewritten (Application environment that has little network
Mode). load.
Connection failure via DPMS access Check the network connection.
was notified when DM860A related Carry out the update in an
A4 ConnectionFailA4
firmware was rewritten (Application environment that has little network
Mode). load.
Turn off and on the power.
Firmware data error message was
Updating starts automatically.
received after DPMS login when
A6 Updating fail A6 Carry out the update in an
DM860A related firmware was
environment that has little network
rewritten (Application Mode).
load.
Turn off and on the power.
When DM860A related firmware
Updating starts automatically.
was rewritten (Application Mode),
A7 Updating fail A7 Carry out the update in an
request was made for firmware data
environment that has little network
after DPMS login but it timed out.
load.
Turn off and on the power.
Firmware download error message
Updating starts automatically.
received (when download fails)
AE Download fail AE Carry out the update in an
when DM860A related firmware
environment that has little network
was rewritten (Boot Loader Mode).
load.
Turn off and on the power.
Firmware download error message
Updating starts automatically.
received (line congestion) when
AF Download fail AF Carry out the update in an
DM860A related firmware was
environment that has little network
rewritten (Boot Loader Mode).
load.
Turn off and on the power.
Firmware download error message
Updating starts automatically.
received (connection failure) when
B0 Download fail B0 Carry out the update in an
DM860A related firmware was
environment that has little network
rewritten (Boot Loader Mode).
load.
Turn off and on the power.
Updating starts automatically.
Firmware download error message.
B1 Download fail B1 Carry out the update in an
(Timeout failure)
environment that has little network
load.
Turn off and on the power.
Error message received when Updating starts automatically.
B2 DM860A related firmware was Download fail B2 Carry out the update in an
rewritten. environment that has little network
load.
Turn off and on the power.
Updating starts automatically.
Firmware writing error message.
B3 Updating fail B3 Carry out the update in an
(Timeout failure )
environment that has little network
load.
Mode change failure of DM860A.
B4 Updating fail B4 Reset and update again.
(Boot Loader Mode)
Mode change failure of DM860A.
B5 Updating fail B5 Reset and update again.
(Application Mode)
64
Device display during firmware update
Display of target device during firmware update.
Target device Display Error code when an error occurs
08 - 0C
10 - 15
Main Main:**% ***min 22 - 24
36 - 3E
50 - 52
Audio PLD APLD:**% ***min 54 - 58
5A - 61
50 - 52
DSP DSP :**% ***min 54 - 58
5A - 61
50 - 52
54 - 58
GUI Serial Flash GUI :**% ***min 5A - 61
80 - 86
A0 - A4
DM860A Boot Loader ESBL:**% ***min A6 - A7
AE - B5
A0 - A4
DM860A Image EIMG:**% ***min A6 - A7
AE - B5
DM860A Image (Emergency
Update retry –
Mode)
Confirming the firmware’s number after upgraded
After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page).
65
3. How to update by USB Memory
You can update the firmware by downloading the latest version with USB Memory.
3.1. Connecting to the Network
(1) Requirements
• The USB memory device format should be set to FAT16 or FAT32.
• USB memory devices will not work via a USB hub.
• It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
• Do not use an extension cable when connecting a USB memory device.
This may cause radio interference.
3.2. Unzip Download File
Pleases unzip the downloaded file on PC.
AVRE400E3 / X2000 USB_AVR-E400E3_000100640700-0001.zip
You can find "firmwares" folder after unzipped. Please copy
that folder to USB flash drive. You have to put "firmwares"
folder on root directly on USB flash drive(memory).
copy to USB flash drive
000100620100
66
USB location is below
USB memory root
Model Name Model Area Product ID
AVRE400E3 North America (E3) 000100640700
AVRX2000E3 North America (E3) 000100640100
AVRX2000E2/E1 Europe (E2) / Singapore(E1) 000100640200
AVRX2000E1C China (E1C) 000100640500
+ firmwares
+ 000100640700
+ APLD.bin
+ DSP.bin
+ enc_update.xml
+ GUI.bin
+ IMG.bcd
+ MAIN.bin
+ SBL.bcd
►
► USB_AVR-E400E3_000100640100-0001
USB_AVR-4520E3_000100620100-0001 ► ►
firmwares
firmwares► ►000100620100
000100640700
3.4. Insert the USB memory into a USB port
NOTE: Please UNPLUG LAN cable from the unit during update.
Download firmware
in USB flash drive.
67
3.5. Start update
Turn on the power of this unit in the "STATUS" + "OPTION" button.
3.6. "USB Update Start" on FL Display
After arround half minutes, FL display shows the following message.
FL Display
Upper * F I R M W A R E U P D A T E
Lower U S B U p d a t e S t a r t
3.7. Push "ENTER" key on RC or Main unit
PUSH "ENTER"
Then start Firmware Update.
FL Display
Upper P l e a s e w a i t . . .
Lower U p d a t e F i l e C h e c k
3.8. Finish firmware update
FL display shows the following message.
FL Display
Upper F i r m U p d a t e
Lower U p d a t i n g C o m p l e t e
--- Cautions on Firmware Update ---
• Do not remove a USB memory until updating is completed.
• Do not turn off the power until updating is completed.
Approximately 1 hour is required for the updating procedure to be completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
68
3.9. About the error code
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
Details of Error code Display Coping strategies
Code
Disconnect and connect the USB
01 Unable to detect USB. ConnectionFail01 memory.
Make sure that the FirmwareFile is in
02 No FirmwareFile in USB. FilesNotFound 02 the USB memory.
FirmwareFile in USB for Check the supported Model name/
03 NotMatchFirm 03
unsupported Model name/area area for the FirmwareFile.
Failed to obtain individual Firmware
04 ConnectionFail06 Start the USB Update again.
information.
TimeOut while obtaining individual
05 ConnectionFail07 Start the USB Update again.
Firmware information
Failed to obtain entire Firmware
06 ConnectionFail04 Start the USB Update again.
information.
TimeOut while obtaining entire
07 ConnectionFail05 Start the USB Update again.
Firmware information
This unit automatically retries several
times. Wait until the FL display stops.
Error notification received while
08 ConnectionFail08 If the FL display stops at the Error
requesting FirmwareInfo.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
TimeOut while obtaining Firmware
09 ConnectionFail09 If the FL display stops at the Error
information
display, press and hold the "Power
operation (X)" button for five seconds.
Unable to detect USB for Disconnect and connect the USB
0A ConnectionFail0A
FirmwareDownload. memory.
No FirmwareFile for Disconnect and connect the USB
0B FilesNotFound 0B
FirmwareDownload. memory.
This unit automatically retries several
times. Wait until the FL display stops.
Received value with invalid
0D ConnectionFail0D If the FL display stops at the Error
PackageVersion.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No UpdatePacket received from
10 Updating fail 10 If the FL display stops at the Error
DM860A (TimeOut).
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
11 received from DM860A Updating fail 11 If the FL display stops at the Error
(FormatError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
12 received from DM860A Updating fail 12 If the FL display stops at the Error
(CheckSumError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
BlockErase failed before rewriting
13 Erase fail 13 If the FL display stops at the Error
Main.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
BlockWrite failed while rewriting
14 Updating fail 14 If the FL display stops at the Error
Main.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Error in Verify after rewriting Main
15 UpdateCheckNG 15 If the FL display stops at the Error
(CheckSumError).
display, press and hold the "Power
operation (X)" button for five seconds.
Unable to detect USB after Disconnect and connect the USB
20 ConnectionFail20
SBLMode. memory.
69
Error
Details of Error code Display Coping strategies
Code
No FirmwareFile in USB after Disconnect and connect the USB
21 FilesNotFound 21
SBLMode. memory.
FirmwareFile in USB after SBLMode Check the supported Model name/
22 NotMatchFirm 22
for unsupported Model name/area area for the FirmwareFile.
Failed to obtain entire Firmware Disconnect and connect the USB
23 ConnectionFail23
information after SBLMode. memory.
This unit automatically retries several
TimeOut while obtaining entire times. Wait until the FL display stops.
24 Firmware information after ConnectionFail24 If the FL display stops at the Error
SBLMode display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
25 Failed to transit to SBLMode. ConnectionFail25 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
TimeOut in Download (writing to
26 Download fail 26 If the FL display stops at the Error
SDRAM) for FirmwareDownload
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Failed to write to EEPROM after
27 ConnectionFail27 If the FL display stops at the Error
SBLMode.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
36 Unable to detect USB. ConnectionFail36 If the FL display stops at the Error
display, press and hold the POWER
button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
37 No FirmwareFile in USB. FilesNotFound 37 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
FirmwareFile in USB for
38 NotMatchFirm 38 If the FL display stops at the Error
unsupported Model name/area
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
39 TimeOut in USBCheck ConnectionFail39 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Unable to detect USB for
3A ConnectionFail3A If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No FirmwareFile for
3B FilesNotFound 3B If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
3F Failed to transit to SBLMode. ConnectionFail3F If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
50 Unable to detect USB. ConnectionFail50 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
70
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
times. Wait until the FL display stops.
51 No FirmwareFile in USB. FilesNotFound 51 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
FirmwareFile in USB for
52 NotMatchFirm 52 If the FL display stops at the Error
unsupported Model name/area
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Error notification received while
54 Updating fail 54 If the FL display stops at the Error
requesting FirmwareInfo.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
55 TimeOut while obtaining Firmware Updating fail 55 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Unable to detect USB for
56 ConnectionFail56 If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No FirmwareFile for
57 FilesNotFound 57 If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Invalid DeviceID in response or no
5A ConnectionFail5A If the FL display stops at the Error
response from Sub for C command.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
NACK received in response or no
5B Updating fail 5B If the FL display stops at the Error
response from Sub for L command.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No UpdatePacket received from
5C Updating fail 5C If the FL display stops at the Error
DM860A (TimeOut).
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
5D received from DM860A Updating fail 5D If the FL display stops at the Error
(FormatError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
5E received from DM860A Updating fail 5E If the FL display stops at the Error
(CheckSumError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
5F received from DM860A Updating fail 5F If the FL display stops at the Error
(DataLength/DataNo). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
NACK received in response or no
60 Updating fail 60 If the FL display stops at the Error
response from Sub for P command.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Mismatched CheckSum in response times. Wait until the FL display stops.
61 or no response from Sub for I UpdateCheckNG 61 If the FL display stops at the Error
command. display, press and hold the "Power
operation (X)" button for five seconds.
71
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
times. Wait until the FL display stops.
Failed to start up Sub in PowerOn
62 Updating fail 62 If the FL display stops at the Error
sequence during Update.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Failed to transit to
63 Updating fail 63 If the FL display stops at the Error
ApplicationMode.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Failed to transit to
64 Updating fail 64 If the FL display stops at the Error
BootLoaderMode.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
WriteEnableLatchBit not set in Read
80 Updating fail 80 If the FL display stops at the Error
after issuing WREN command.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
BlockErase failed in Read after
81 Updating fail 81 If the FL display stops at the Error
issuing BE command.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No UpdatePacket received from
82 Updating fail 82 If the FL display stops at the Error
DM860A (TimeOut).
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
83 received from DM860A Updating fail 83 If the FL display stops at the Error
(FormatError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
84 received from DM860A Updating fail 84 If the FL display stops at the Error
(CheckSumError). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Abnormal data in UpdatePacket times. Wait until the FL display stops.
85 received from DM860A Updating fail 85 If the FL display stops at the Error
(DataLength/DataNo). display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
Mismatched CheckSum in times. Wait until the FL display stops.
86 CheckSum comparison after Updating fail 86 If the FL display stops at the Error
rewriting. display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
A2 Unable to detect USB. ConnectionFailA2 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
A3 No FirmwareFile in USB. FilesNotFound A3 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
FirmwareFile in USB for
A4 NotMatchFirm A4 If the FL display stops at the Error
unsupported Model name/area
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Error notification received while
A6 Updating fail A6 If the FL display stops at the Error
requesting FirmwareInfo.
display, press and hold the "Power
operation (X)" button for five seconds.
72
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
times. Wait until the FL display stops.
A7 TimeOut while obtaining Firmware Updating fail A7 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Unable to detect USB for
AE ConnectionFailAE If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
No FirmwareFile for
AF FilesNotFound AF If the FL display stops at the Error
FirmwareDownload.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
TimeOut in Download (writing to
B1 Download fail B1 If the FL display stops at the Error
SDRAM) for FirmwareDownload
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Error notification received after
B2 Updating fail B2 If the FL display stops at the Error
rewriting DM860A Firm.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
B3 Error in FirmwareUpdate (TimeOut). Updating fail B3 If the FL display stops at the Error
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Failed to transit to
B4 Updating fail B4 If the FL display stops at the Error
BootLoaderMode.
display, press and hold the "Power
operation (X)" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
Failed to transit to
B5 Updating fail B5 If the FL display stops at the Error
ApplicationMode.
display, press and hold the "Power
operation (X)" button for five seconds.
Confirming the firmware’s number after upgraded
After updating the firmware, check the version. Refer to "1. μcom/DSP Version display mode" (24 page).
73
ADJUSTMENT
Audio Section
Adjusting Idling Current
Required measurement equipment: DC Voltmeter
1. Preparation
(1) Temperature should be at avoid direct blow from an air conditioner or an electric fan and humidity should be moderate,
and place the set at normal usage environment.
15 °C ~ 30 °C (59 °F ~ 86 °F)
(2) Presetting
• POWER (Power source switch) STANDBY
• SPEAKER (Speaker terminal) No load
(Do not connect speaker, dummy resistor, etc.)
2. Adjustment
(1) Remove the top cover and set VR401, VR402, VR403, VR404, VR405, VR406, VR407 on at fully 7CH AMP UNIT at
fully counterclockwise (c) position.
(2) Connect DC Voltmeter to test points (FRONT-Lch: TP401, FRONT-Rch: TP402, CENTER ch: TP403, SURROUND-
Lch: TP404, SURROUND-Rch: TP405, SURROUND-BACK Lch: TP406, SURROUND-BACK Rch: TP407.
(3) Connect the power cord to AC Line, and set the power switch to "ON".
(4) Presetting.
MASTER VOLUME : "---" counterclockwise (c min.)
SPEAKER (Speaker terminal) : No load
(Do not connect speaker, dummy resistor, etc.)
MODE : MCH STEREO
FUNCTION : DVD
(5) Within 2 minutes after the power on, turn VR401 clockwise (x) to adjust the TEST POINT voltage to
6.5mV ± 0.5mV DC.
(6) After 10 minutes from the preset above, turn VR401 to set the voltage to 8.0mV ± 0.5mV DC.
(7) Adjust the Variable Resistors of each channel in the same way.
7CH AMP UNIT
DC Voltmeter
TP403
VR401 VR404 VR403 VR405 VR402 VR406 VR407
TP404 TP405
TP401 TP402 TP406 TP407
C ch
S Lch S Rch
F Rch S Back Lch
F Lch S Back Rch
74
This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices.
Sound modes and surround parameters
This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”
Channel output Surround Parameter
Sound Mode Loudness Dynamic Low Frequency
Front Surround Surround back Front height
Center Subwoofer Cinema EQ Management Compression Effects Delay Time
L/R L/R L/R L/R
z2 z3 z4
DIRECT/PURE DIRECT (2-channel)
z1 S Dz5 S S
DIRECT/PURE DIRECT (Multi-
S D D Dz6 Dz6 D S S S
channel)z1
STEREO S D S S S
MULTI CH IN S D D D Dz7 D Sz8 S
DOLBY PRO LOGIC gz S D D Dz7 D S S S
DOLBY PRO LOGIC gx S D D D D Sz9 S S
DOLBY PRO LOGIC g S D D D Sz10 S S
DTS NEO:6 S D D D D Sz9 S S
DOLBY DIGITAL S D D D Dz7 D Sz8 S
DOLBY DIGITAL Plus S D D D Dz7 D Sz8 S
DOLBY TrueHD S D D D Dz7 D Sz8 S S S
75
DTS SURROUND S D D D Dz7 D Sz8 S
DTS 96/24 S D D D Dz7 D Sz8 S
DTS-HD S D D D Dz7 D Sz8 S
DTS Express S D D D Dz7 D Sz8 S
MULTI CH STEREO S D D D D D S S S
ROCK ARENA S D D D D D S S S
JAZZ CLUB S D D D D D S S S
MONO MOVIE S D D D D D S S S
VIDEO GAME S D D D D D S S S
MATRIX S D D D D D S S S S
VIRTUAL S D S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z2 This item can be selected when a Dolby TrueHD signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal is played.
z4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5 Only when “Subwoofer Mode” is set to “LFE+Main” , sound is output from the subwoofer.
z6 A signal for each channel contained in an input signal is output as audio.
z7 Audio is output from the front height speaker when the set sound mode name contains “+PLgz”. For information on how to check the sound mode, see .
z8 This setting is unavailable when the set sound mode name contains “+PLgx Music”. For information on how to check the sound mode, see .
z9 This setting is possible when the sound mode is “PLgx Cinema” or “DTS NEO:6 Cinema”.
z10 This setting is possible when the sound mode is “PLg Cinema”.
Surround Parameter
NEO:6 Music Audyssey
PRO LOGIC g/gx Music mode only
mode only Tone Restorer
Sound Mode Height Gain Subwoofer
Effect Level Room Size z12 Dynamic z15
z11 MultEQ® Dynamic EQ
Panorama Dimension Center Width Center Image Volume
z13 z14
z14
DIRECT/PURE DIRECT (2-channel)
z1 Sz5
DIRECT/PURE DIRECT (Multi-
S
channel)z1
STEREO S S S S S S
MULTI CH IN S S S S S S
DOLBY PRO LOGIC gz S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S
DTS NEO:6 S S S S S S S
DOLBY DIGITAL S S S S S S
DOLBY DIGITAL Plus S S S S S S
DOLBY TrueHD S S S S S S
DTS SURROUND S S S S S S
DTS 96/24 S S S S S S
DTS-HD S S S S S S
DTS Express
76
S S S S S S
MULTI CH STEREO S S S S S S
ROCK ARENA S S S Sz16 S S S S
JAZZ CLUB S S S S S S S S
MONO MOVIE S S S S S S S S
VIDEO GAME S S S S S S S S
MATRIX S S S S S S
VIRTUAL S S S S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z5 Only when “Subwoofer Mode” is set to “LFE+Main” , sound is output from the subwoofer.
z11 This setting is available when the set sound mode name contains “+PLgz”. For information on how to check the sound mode, see .
z12 This item cannot be set when “Dynamic EQ” is set to “On”.
z13 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z14 This item cannot be set when “MultEQ®” is set to “Off” or “Graphic EQ”.
z15 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z16 In this sound mode, bass is +6 dB, and treble is +4 dB (Default).
Types of input signals, and corresponding sound modes
This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode.
Symbols in the table
F This indicates the default sound mode.
S This indicates the selectable sound mode.
Input signal types and formats
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
Sound Mode NOTE DTS- DOLBY DOLBY
ANALOG PCM DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY
PCM HD High DTS DTS DOLBY DIGITAL DIGITAL
(Multi- Master DSCRT MTRX DTS 96/24 DIGITAL DIGITAL DIGITAL
(2-channel) Resolution EXPRESS (5.1-channel) TrueHD EX (With EX (With
channel) Audio (With Flag) (With Flag) Plus (5.1-channel) (2-channel)
Audio Flag) no Flag)
DTS SURROUND
DTS-HD MSTR F
DTS-HD HI RES F
DTS ES DSCRT6.1 z1z2 F
DTS ES MTRX6.1 z1z2 F
DTS SURROUND S S F
DTS 96/24 F
DTS (–HD) + PLgx CINEMA z1z3 S S S S S
DTS (–HD) + PLgx MUSIC z1z2 S S S S S
DTS (–HD) + PLgz z1z4 S S S S S S S
DTS EXPRESS F
DTS (–HD) + NEO:6 z1z2 S S S S S
77
DTS NEO:6 CINEMA S S S
DTS NEO:6 MUSIC S S S
DOLBY SURROUND
DOLBY TrueHD F
DOLBY DIGITAL+ F
DOLBY DIGITAL EX z1z2 S S S
DOLBY (D+) (HD) +EX z1z2 S S
DOLBY DIGITAL S F F
DOLBY (D) (D+) (HD) +PLgx
z1z3 S S F S S
CINEMA
DOLBY (D) (D+) (HD) +PLgx
z1z2 S S S S S
MUSIC
DOLBY (D) (D+) (HD) +PLgz z4 S S S S S
DOLBY PRO LOGIC gx CINEMA z1z2 S S S
DOLBY PRO LOGIC gx MUSIC z1z2 S S S
DOLBY PRO LOGIC gx GAME z1z2 S S S
DOLBY PRO LOGIC gz z1z4 S S S
DOLBY PRO LOGIC g CINEMA S S S
DOLBY PRO LOGIC g MUSIC S S S
DOLBY PRO LOGIC g GAME S S S
z1 This sound mode can be selected when “Amp Assign” is set to “Surround Back”.
z2 If “Speaker Config.” – “Surr. Back” is set to “None”, this sound mode cannot be selected.
z3 If “Speaker Config.” – “Surr. Back” is set to “1spkr” or “None”, this sound mode cannot be selected.
z4 If “Speaker Config.” – “Front Height” is set to “None”, this sound mode cannot be selected.
Input signal types and formats
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
Sound Mode NOTE DTS- DOLBY DOLBY
ANALOG PCM DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY
PCM HD High DTS DTS DOLBY DIGITAL DIGITAL
(Multi- Master DSCRT MTRX DTS 96/24 DIGITAL DIGITAL DIGITAL
(2-channel) Resolution EXPRESS (5.1-channel) TrueHD EX (With EX (With
channel) Audio (With Flag) (With Flag) Plus (5.1-channel) (2-channel)
Audio Flag) no Flag)
MULTI CH IN
MULTI CH IN F
MULTI CH IN + PLgx
z1z3 S
CINEMA
MULTI CH IN + PLgx
z1z2 S
MUSIC
MULTI CH IN + PLgz z1z4 S
MULTI CH IN + Dolby EX z1z2 S
MULTI CH IN 7.1 z1z2 F (7.1)
DIRECT
DIRECT S S S S S S S S S S S S S S S S
PURE DIRECT
PURE DIRECT S S S S S S S S S S S S S S S S
DSP SIMULATION
MULTI CH STEREO S S S S S S S S S S S S S S S S
ROCK ARENA S S S S S S S S S S S S S S S S
JAZZ CLUB S S S S S S S S S S S S S S S S
MONO MOVIE S S S S S S S S S S S S S S S S
78
VIDEO GAME S S S S S S S S S S S S S S S S
MATRIX S S S S S S S S S S S S S S S S
VIRTUAL S S S S S S S S S S S S S S S S
STEREO
STEREO F S F S S S S S S S S S S S S S
z1 This sound mode can be selected when “Amp Assign” is set to “Surround Back”.
z2 If “Speaker Config.” – “Surr. Back” is set to “None”, this sound mode cannot be selected.
z3 If “Speaker Config.” – “Surr. Back” is set to “1spkr” or “None”, this sound mode cannot be selected.
z4 If “Speaker Config.” – “Front Height” is set to “None”, this sound mode cannot be selected.
Relationship between video signals and monitor output
MAIN ZONE MONITOR OUT
Input connector Output connector Menu displayed
Video Conversion
HDMI COMPONENT VIDEO HDMI HDMI
On A A A A Only the menu is displayed
On A A S S <VIDEO> S (VIDEO)
On A S A
S <COMPONENT> S (COMPONENT)
On A S S
On S A A
On S A S
S <HDMI> S (HDMI)
On S S A
On S S S
Off A A A
Off A A S
A
Off A S A
Off A S S
Only the menu is displayed
Off S A A
Off S A S
S <HDMI>
Off S S A
Off S S S
79
S : Video signal input present S < > : The input signal between the < > marks is output. S() : Superimposed on the picture indicated in ( ).
A : No video signal input A : No video signal output
The main zone video conversion function is compatible with the following formats: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60.
NOTE
The status display screen cannot be displayed at a computer’s resolution (e.g. VGA) or while certain 3D video contents is being played.
When the menu is operated on a computer’s resolution (e.g. VGA) or during playback of certain 3D video content, the playback image switches to the menu screen image.
Video signal resolution conversion table
When “Video Conversion” is set to “On”, “i/p Scaler” is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output (vpage 82
“Converting input video signals for HD output (Video conversion function)”).
The relationship between the resolution of the convertible video signal and HDMI output resolution is shown in the table below.
HDMI Output
Output resolution
480i/576iz1 480p/576p 1080i 720p 1080p 1080p 24Hz 4Kz2
Input resolution
Video input 480i/576i S S S S S S S
480i/576i S S S S S S S
480p/576p – S S S S S S
Component video input 1080i – – S S S S S
720p – – S S S S S
1080p – – – – S S S
480i/576i S S S S S S S
480p/576p – S S S S S S
1080i – – S S S S S
HDMI input 720p – – S S S S S
1080p 24Hz – – – – Sz3 Sz4 S
1080p – – – – S S S
4K – – – – – – Sz5
S The resolution set in “Resolution” in the menu is output.
– Output at the same resolution as the input video signal resolution.
z1 Only output when “i/p Scaler” in the menu is set to “Off”.
80
z2 Output at a resolution of 3840 x 2160 pixels (24/25/30 Hz).
z3 The resolution set in “Resolution” in the menu is set to “Auto”, and a television that does not support 1080p 24Hz video signals is connected.
z4 The resolution set in “Resolution” in the menu is set to “Auto”, and a television that supports 1080p 24Hz video signals is connected.
z5 Output at the same resolution as the input video signal resolution.
NOTE
The 4K, 3D, Computer resolution, “x.v.Color”, sYCC601 color, Adobe RGB color or Adobe YCC601 color input to HDMI is output at the same resolution as the input video signal.
When “Video Mode” in the menu is set to “Game” or “Auto” and game contents are played, the same resolution as the input video signal is output.
When “Resolution” in the menu is set to “Auto”, the number of pixels in the television panel connected to the HDMI output connector is automatically detected, and the optimum resolution is output according to the
table above.
If 1080p 24Hz signals input from the HDMI terminal are converted into 1080p 60Hz/1080p 50Hz for output, they are output according to the specified “Format” setting in the menu:
“NTSC” – Output as 1080p 60Hz.
“PAL” – Output as 1080p 50Hz.
You can not convert 60Hz into 50Hz or vice versa.
You can not convert 50Hz into 24Hz.
Personal notes:
81
TROUBLE SHOOTING
1. POWER
1.1. Power not turn on
Power not turn on.
When the power turned on, When the power turned on,
NO YES
does the ON/STANDBY does the ON/STANDBY
indicator on the front panel indicator on the front panel
flashing green? flashing red?
NO
YES
Is the fuse blown? Refer to 1.2.Fuse is blown.
NO
Is a DC 5V voltage output To troubleshooting
Is a DC 5V voltage being NO when the cord supplying the NO 6. SMPS.
YES
supplied from the SMPS B'D power from the SMPS B'D (Refer to 95
(CN4141) to the HDMI B'D? to the HDMI B'D (N3601) is page.)
unplugged?
YES YES
Check circuitry and parts from
Check µ-com periphery N3601 on the HDMI B'D to the
circuitry of HDMI B'D and µ-com power supply for damage
replace any defective parts. and shortcircuits, and replace
any defective parts.
About 10 seconds later, Are there any incomplete Check "3.5. Errors
YES NO
does the ON/STANDBY connections in the connectors checking mode".
indicator on the front panel connecting between the (Refer to 46
turn lighting green ? various circuit boards? page.)
NO YES
YES
Is the fuse blown? Refer to 1.2. Fuse is blown. Connect the connectors properly.
NO
Check voltage of N3405 (1- Check circuitry and parts from N3405 on
5PIN) of HDMI B'D while the 0V the HDMI B'D to the µ-com for damage
ON/STANDBY indicator is and shortcircuits, and replace any
flashing green. defective parts.
0.6V or -0.6V
Pull out connector (CP4000)
of SPK BD, and check "3.5.
Errors checking mode".
(Refer to 46 page.)
1.2. Fuse is blown
Fuse is blown
Check for short circuits in the Check for short circuits in
Check for leaks or short
rectifier diodes and circuitry of the power stabilizer unit's
circuits in the primary side
the secondary side rectifying regulator output terminal and
parts, and replace any
circuits, and replace any the ground, and replace any
defective parts.
defective parts. defective parts.
After repairing, also replace the fuse.
82
2. Analog video
HDMI OUT output NG
Input CVBS Input COMPONENT Input
Function : CBL/SAT Function : CBL/SAT HDMI
To troubleshooting
To A
3.2 HDMI/DVI.
<HDMI B'D> UNIT test point
Detail A Detail B
R1306
R1308
R1307
R1309
CN3404-3pin
CN3404-4pin
CN3404-5pin
CN3404-6pin
<VIDEO B'D> UNIT test point
C5021 +side
C5018 +side
C5017 +side
J5033
J5035
J5010
C5003 + side
C5002 - side
CN5000 10pin
83
A Input
CVBS/COMPONENT
q
Check the input signal to
VIDEO DECODER.
Is signal confirmed for the
following point?
HDMI B'D NO Check the connections between NO Input CVBS: Check B
V : R1309 boards.
COMPONENT-Y : R1306 Input COPONENT : Check C
COMPONENT-Cb : R1308
COMPONENT-Cr : R1307
YES
To troubleshooting 3. HDMI/
DVI (25).
84
B Input
CVBS
q
Check on set value of each IC.
Is they the following voltage
values?
HDMI B'D NO
CN3404-4pin : L(0V) HDMI B'D flaw.
CN3404-5pin : H(5V)
YES
w
Extend HDMI B'D using a jig.
e
Is the power supply voltage
correctly output? NO
Check connection of FRONT
V+5V : C5003 : + side CONNECTOR BD and VIDEO BD.
V-5V : C5002 : - side
YES
r
Is the signal output from the NO Check cable between main unit and
video amplifier? player or check player.
V : J5010 Check power supply voltage
of IC5000 and IC5001, and
surrounding circuitry soldering.
YES
Check cable between main
unit and monitor or check
monitor. b Unless specified, VIDEO B'D part.
85
C Input
COMPONENT
q
Check on set value of each IC.
Is they the following voltage
values? NO
HDMI B'D HDMI B'D flaw.
N3404-3pin : L(0V)
N3404-6pin : H(5V)
YES
w
Extend HDMI B'D using a jig.
e
Is the power supply voltage
correctly output? NO
Check connection of FRONT
V+5V : C5003 : + side CONNECTOR BD and VIDEO BD.
V-5V : C5002 : - side
YES
r
Is the signal output from the
Is the signal input to video amplifier?
video amplifier? NO NO
COMP-Y : C5017 : + side Check cable between main unit and
COMP-Y : J5033
COMP-CB : C5018 : + side player or check player.
COMP-CB : CN5000 10pin
COMP-CR : C5021 : + side
COMP-CR : J5035
YES
Check power supply voltage of
YES IC5003, and surrounding circuitry
soldering.
Check FRONT CONNECTOR
B'D flaw, and connection of
FRONT CONNECTOR B'D or
HDMI B'D and VIDEO B'D.
b Unless specified, VIDEO B'D part.
86
3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
No picture or sound is output.
Check HDMI/DVI cable connection.
NO
There may be the a problem with the HDMI/
(1) Is the HDMI/DVI cable properly connected?
DVI cable. Check connection.
YES
YES
(2) Are you using an HDMI/DVI selector, repeater or a device for Disconnect everything and connect only the
improving picture quality? HDMI/DVI cable to check
NO
NO
Use a certified HDMI cable (with the HDMI
(3) Are you using a certified HDMI cable (with the HDMI stamp)?
stamp).
YES
NO Replace the HDMI/DVI cable with one that
(4) Are you using an HDMI/DVI cable less than 5 meters in length? is less than 5 meters in length (2 meters
recommended) to check.
YES
YES
(5) Are the picture and sound output when another HDMI/DVI
The HDMI/DVI cable is defective.
cable is used?
NO
Check BD/DVD player.
NO
Check the HDMI output setting, referring to
(6) Is the BD/DVD player's HDMI output setting correct?
the BD/DVD player operating instructions.
YES
(7) When you use a DENON BD/DVD player, is the fluorescent
display tube's "HDMI" indicator lit? If you use a non-DENON
BD/DVD player, proceed to "YES".
YES
(8) Are the picture and sound YES Set the BD/DVD player output resolution to
NO output when the BD/DVD
a resolution with which the TV is compatible.
player's resolution is changed?
NO
(9) Is sound output from the set's speaker terminals when the TV's YES The BD/DVD player may not be compatible
power is turned off or the connection cable between the TV and with HDCP repeaters. Ask the BD/DVD
the set is disconnected? player's manufacturer.
NO
(10) Are the picture and sound YES
output when a different The BD/DVD player is defective.
BD/DVD player is used?
NO
87
Check TV
NO Use an HDCP-compatible TV. PC TVs cannot
(11) Is the TV HDCP-compatible?
be used.
YES
NO If the TV is not compatible with resolutions of
(12) Is the TV compatible with resolutions of 1080P? 1080P, no picture will be output, even if the
BD/DVD player resolution is set to 1080P.
YES
NO
Check the TV's input setting, referring to the
(13) Is the TV's input set to HDMI?
TV's operating instructions.
YES
NO
(14) Are the picture and sound output when a different TV is used? The TV is defective.
YES
Check set (AV RECEIVER)
Please Check Firmware. YES •Please check IP SCALER (U1601, HDMI B'D) and
Is "IP SCALER NG" diplayed? DDR2(U1801/1802) and around circuits.
(Refer to 26 page) If no problem, U1601 or U1801/U1802 will be broken.
NO
Please refer to the "AVRE400_HDMI Rx-Tx Failure Detection
Procedure Manual ver_1.00" of SDI.
88
4. AUDIO
4.1. AUDIO CHECK
Audio output NG.
CHECK1 INPUT SURROND MODE SOURCE NO
Check ANALOG audio BLOCK.
Audio output OK? ANALOG 2CH DIRECT ANALOG
YES
CHECK2 INPUT SURROND MODE SOURCE NO
Legacy Check Digital audio BLOCK.
Audio output OK? COAX or OPT Don't care
(PCM or DolbyDigital or dts…)
YES
CHECK3 INPUT SURROND MODE SOURCE NO
Check ADC BLOCK
Audio output OK? ANALOG 2CH MULTICH STEREO ANALOG
YES
CHECK4 INPUT SURROND MODE SOURCE NO
Legacy Check HDMI BLOCK.
Audio output OK? HDMI Don't care
(PCM2ch or DolbyDigital or dts…)
YES
CHECK5 INPUT SURROND MODE SOURCE
HBR audio
Audio output OK? HDMI Don't care
(DolbyTrueHD or dtsHD MA)
YES (Digital audio Block is OK)
NO
Check other factors.
CHECK6 INPUT Connect
HDMI This unit's HDMI OUT → Other AVR's HDMI IN
AVR's (connected in HDMI) audio
Setting SURROND MODE SOURCE
output OK?
CEC STANDBY Don't care HBR audio(DolbyTrueHD or dtsHD MA)
YES NO
Check Digital audio BLOCK Check HDMI BLOCK.
89
4.2. Power AMP (AMP UNIT)
No sound is output.
The protector operates.
YES
Is the power transistor open or short- YES
circuited? Replace the power transistor.
2SB1560/2SD2390
NO
Is the emitter resistance of the power YES
transistor open? Replace the emitter resistance.
0.47Ω
NO
Is the base resistance of the power YES
transistor open? Replace the base resistance.
22Ω
NO
Is the trimmer potentiometer between the YES
base of the power transistor open? Replace the trimmer potentiometers.
1kΩ
NO
Are the zener diode and diode which
are connected with the base of a power YES
transistor short-circuited? Replace the zener diode and the diode.
MTZJ3.3B
1SS133
NO
YES
Is other transistor trouble? Replace the transistor.
NO
YES
Is other resistance trouble? Replace the resistance.
NO
Turn on the power, check that voltage of the section is normal and that idling electric current is
flowing.
90
4.3. Analog audio
No sound is output
Is the voltage of ±7V supplied to NO
The power supply of ±7V is repaired.
INPUT B'D CN4006?
YES
Is the audio signal transmitted to YES
The power amplifier is repaired.
INPUT B'D CN401?
NO
NO
Connect the connectors properly.
Is the serial data for electronic volume YES Is the connector correctly connected
transmitted to INPUT B'D CP4200? with HDMI B'D?
YES
The HDMI B'D is repaired.
YES
Once more, check the connection of the connector.
When you can specify the troubled channel and function, check the corresponding
signal route.
91
5. Network/USB
5.1. Cannot connect to network
Checking the environment
NO
Turn off the power and check the LAN cable
Is the LAN cable properly connected?
properly, and then turn the power back on.
YES
Checking the settings
YES
Set the IP address and other parameters
NO properly. For a fixed IP setting, check
Are the AVR-E400/X2000's network settings correct? whether the IP address is redundant with
that of other devices and the subnet mask
setting is correct.
YES
NO
Are the router, hub and other peripherals properly connected? Connect them properly to peripherals.
YES
Check the router's operating instructions
NO and set it properly.
Are the router's settings correct?
Check whether there are connection
restrictions due to the MAC address, etc.
YES
Checking the set (AVR-E400/X2000)
NO
Is a voltage (5V) supplied between the pins 2 and 5 of N3601? The circuit from AC inlet to N3601 is defective.
YES
NO
The U3601 and surrounding circuitry or
Is output voltage (3.3V) supplied from U3601?
circuitry of 3.3V device are defective.
YES
NO The U3604 or U2602 and surrounding
Is output voltage (1.2V) supplied from U3604?
circuitry are defective.
YES
Is the version of IMG or Ethernet SBL displayed in Version check NO
The firmware of ethernet is defective.
mode?
YES
The U2802 and surrounding circuitry are defective.
92
5.2. USB device is not recognized
Checking the USB device
YES
Are you using a USB hub? Don't use the USB hub.
NO
Only mass storage devices in FAT16 or
NO
FAT32 format or MTPcompatible devices
Is the USB device compatible with the set?
and iPod (Remove some models) are
supported.
YES
Checking the set (AVR-E400/X2000)
NO
Is the wire properly connected between N2801 on the HDMI board
Connect the wire properly.
and CN4402 on the USB board.
YES
NO
Is a voltage (5V) supplied between the pins 1 and 4 of CP4406 on the The U2806 and surrounding circuitry on the
USB board (USB connector)? HDMI board are defective.
YES
The circuitry from U2602 on the HDMI board to CP4406 on the USB
board is defective.
5.3. No picture or no sound is output
Checking the set (AVR-E400/X2000):(If no picture is output)
Are digital video signals(BCLK, VD0 - VD7) output from U2602 to NO U2602 and surrounding circuitry are
U1601? defective.
YES
Check the HDMI/DVI circuit.
Checking the set (AVR-E400/X2000):(If no sound is output)
NO
U2602 and surrounding circuitry are
Are I2S signals output to U2401 pin 12, 13, 14, 15?
defective.
YES
NO
U2401 and surrounding circuitry are
Are audio signals output to IC4200 pin 62 and 63?
defective.
YES
Check the Analog audio circuit.
93
HDMI test point (AVR-E400 / X2000)
N3601
R2489 C2473 C2465 N3401
N3404 N3601
R2470
R2453
R2454
R2445
CLP1001
R2435
R2469
R2418C2455R2417 U2001
C3758
ADSP21487
R2232
C3755
R2436
R2446
R2472
R2471
R2455
R2456
C2409 R2101 R2001 C3811 C3810 C3813
R2415 C2454 R2416 C3801 N1301
C2421
C3745
C2434 C3799
C2024
C3730
C3748
R2019
R2020
R2120
C2033
C2030
R2490 C2474 C2466 N2001 L3627 L3626
C2482
U2402 C2419
1 23 C3818
R2025
R2024
C2050
R2026
R2028
R2027
R2030
C3753
C2407
C2046
R2409 C2002 C3791 L3609
C2041
L3628
C2408
I O
N3405
R2016 C3726
R2017 R2048 L3610
C2487
R2119
G
N3403
U2406 C2464 C2433 R2006 R2049 10 1 C3605 U3605
C3802 R3611
C3817
C2481 C3750 R2007 C2004 C3812 R3605 C3623
C2485
R2408
R3234
C2006 R2003
C2403
C3629
R3235
C3627
R3252
C3216 R3630 C3633 C3603 C3761
R3224
R2002
Q3206
R3253
R1312
C3816
C3742
C3211
C2438 C2406
R3254
C2426
Q3220 R3223 R2103 R3629 R3609 C3819
R2411 C2412
C3641
DV1.8V C3647
R2104 C3789
C3651
R3633 R3634
C3653 R3641
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
MX29LV160DBTI-70G
C2416
R2011 C2089 R2031 R3639
C2457
R2422
R2421
L3606
L3605
C2076 R2033 U3603
L3621
Q3205
C2401 C2500 R2105
R2029 C2088 C3639
L3622
R2106
R2501
C3214
C2489
R2231 R2107 R2035
R3236 CVBS
C3210 C2013 C3621
U3601
R3225 R3221 R3255
R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
C2223 Q3213 R3220 C2090 C3659
C2418 C2227 C2078 Y
C3625
U2401 R3239 L3617
U2003
Q3204 C2080 C3820 C3665
L3618 R3637 C3631
C3675
R3226 R3222
R3219 Q3211 C2082
Q3215
R3656
R2410
C3692
C2437
C2475 C2476
C2467 C2468
R2491 R2492
R2407
C3694
C2498 C3723 Q3629 C3699
U2407
R2406 C2091 R3625 R3626 C3601 C3765
L3601 R3607
Q3209
R2405 R2116 C3649
R3229
R3232
C2449 C2451 C2430 Q3603
R3227 R2115
C2428
C2427
C2424
C2425
C2422
Pb
C3703
R3062 Q3601
R3241
L3602
R3073
R3074
L3403 Q3610
C3019
C R3075 U3601 R3651
R3070
R3063
C3020
R3061
C3725 C2092
R3060
R2437
C3409 R3064 R2114 R1637
C3415 C3022 R2042 MOSI C3688 C3764
R3654 C3673
U2203
R2500 R2112 MISO L3613
2 40 N3408 R2043 R3649 HSDA
C2499
R2044
R2046
R2499 DSP_CLK
R2018
C2107 C2106 DSP_ICS L3614 TX_SCL
R2108 Q3608 Q1606
C3405 C3418
C2094 C2095
R2111
R2224 R2223
C3736
R3655
C2212 C2211
R2040 C3637 C3619 HSCL
C3695
C2491 R2109 R2110 TX_SDA
1INF/FR
C3674
C2093 1OUT64FS R1638 R3650
L3401
X2201
1 39 C2032
C3783
1INFS
C2492 R2021 R2022 1OUTFS C2043 Q3611
IN ICT OP ADJ FI C3787
R2276
C3762
C2039 C2044
R3652
C3407 C3416
C2404
C3411 C3414
R2252 R2278 X2001
C2213 R2245 1IN64FSC3700 Q3604
L3402
L3404
C2486 C2488
R2301
C3737
R3029R3028
R3027
C3698
R3025
R2248
7
R3031
R3030
1 C3676 R3657
R3023
R3024
R3018
R3017
R2251
C3009 C2219 U2205 Q3602 Q3609
R1703
R2473
R2474
R2447
R2458
R2457
R3402 N2201 DATAF
R3026 C3010 C2493
HDMI PCB
R3403
R2270
R2249
R2247
D3401 R1409 R1408
R2244
R2256
R2246
R1696
R2240
R2242
R2241
R2269
D2401
R2229
C2217
R2228
R1690
R3404
C1319
C1316 C1315
C1317 C1314
C1320 C1321
C3734 R2419 C2456 R2420 R2271 R1702
C1515
N1601
Q3625
C3774
7020-07298-020-0S MAC ADDRESS LABEL
Q3615
Q3621 R2272 R1649
R3668
U3604
R2273 MOSI
R3405 R2230 R1680 C1032
C3717 R3102 HSCL
C1318
L3603 SCLK
N3406 R3663 R3675 R2227 U2203 R2274 R3103 HSDA
R3608
ADV8003_SPI_CLK
C3602
R2286
U1304
U2403 PCM9211
I O
G
C3604 L3604
C3681 R3670
C3690 Q3619
C1471
C2494 R2275 R1698
C1493
R3610
C3780
R2264
ADV8003_SPI_CS
U2207
C3752
R2235
TXFS
C3638 C3620
R1705 R1650
R3085
C2495
R3087
U3002
R1651
R3095
R3632
C3634
C1826
L1801
C3626
R1819
R1818
C1852
R5F56108VNFP
R2807
R2808
C1853
C2803
R2859
R2863R2810
C2853R2860
C3628
C1483
C1499
R2208C2222 C3632 C1473 L1617
C3728
C3689
C3685
R3083 N3001 R2209 R1306 R1315 DV1.8VVD3 VD4
C3727R3213C3207R3212
U3201 7850_INT2 TXI2S2 TX64FS
C1807
R3034 C2218 R1704 R1697 R1308 R1320
U2806
R1743
L3607 R3638
ADV8003_SPI_MO
R3045 R3096 1 R1707 R3631 R1307 R1319 TXI2S1 TXMCK Q3630 C3769
G 7 BCLK C3770
C2805
VD0
C2804
R1652
C2669
R3043
R3042
D C2811 C3652
R1309 R1314
TXSPDIF C1695
VD5
TXI2S0
C2629
C2806
ADV_SPI_MI
C2672
7850_INT1 C3720
R3640
R3037 I O U2806 R1744
R3100
L3608
N2801 L2804 TXI2S3 C1854 VD1
U3604
R2809 VD2
R3051
R1729
U3602
C3686
R2806
C
L2806 R2805
R3099
C3014
R3628
N
R
P
R3076
C3744 C1486
C3015 C3016
C1605
L1602
R1682 VD7
H
G
D
C
B
E
F
A
1
M
C1833
K
L
J
L3615
L3616
C1305
R1417
R1414
R1415
C1490
R3627
11 R2818
Q3617
C3712
C3650
Q2601
Q2602
R2602
X3001
C2627
C2668
C1387
123
C3672 R2819 VD6 R1693 R1694
R3039
L3619 C3622 R1684
C3724
R3210
N2801
CB
C1729
C3203 N3002 R2617 C1393 R1352 R1807
R2721 R2707
Q3626
R3660
R1667
R3059
R3662
R2705
R2701
R2704
R3666
R3673
C3204 R1351 R1645 C3768
R3058 L3620 CR R1809
R2614
C1304 R1679 R1646
AC
AB
C1508
AA
W
M
R3647
H
R
P
G
Y
V
R1811
L
T
J
R3057 R3084 C2825 C2810 C3640 Q3614
R1668
N2602 C1303 R1632
789
R3086 Q3607 R1813 1
AC
C1302
R2635
R2607
C3018
R1683
R3050
R3098 2
SF_CS
C3797 R3679 R3092
R3682 R3088 1
R3094
AB
C2814 6
C2809
U3608
N3407 R1817
2108 19 12 7 3 0 0
R3097
AA 3
R3090 R3676
34 4 4 4 41 1 2 1
R2865
R3683 C2813
C3017
C2625
C2678 R1815 4 R1695
8003_INT1
C C3 C3C3 C3 C34C34 34
C3697
R2864
Y
R3669 C1309 U1802
L2601
W 5
C3806
C
R1681 8003_INT2
R3648
C3792 V
R1666 K4T51163QJ 6
C2824 Q3606
U 7
SF_MISO
Q3627
Q3620
R3653
Q3613
T 8
R2834
R2831
R3659
C1034 R1689 9
8003RESET
R3680
R3661
R2713
C1503
10
C3701
C2624 R1403
DM860A
8003_INTO
R2822
R2826
R2824
C2812
R2813
R2812
R1625
C3804 U2602
X1601
C2626 C3696 7850RESET
R1349 C1500
R1687
R2711
R3681 C1509 R1404
TX_XTALN
C1702 C1703
U2603
R3658
R3678 R2608 3002RESET U1001 C1510 R1686
D3602
R2709
H27U1G8F2BTR
J
C1312 R1338 TX_XTAL
U2601 C2823
C2822
U2602
L2808
H
R3665 ADV3002 G
C1517 17
D3601
R1360
C1834
X1301
C3795 R2613 C1512
F 18
R2609 Q3612 R1357 19
TX_TEST1
DDCDATA-IN2 C3677
E
M
N
H
R
P
D
C
B
E
R1678
A
C1511
L
J
R3703 U1601 20
R2214
D
C
R1344 21
R1626
R2213 ADV8003
R3019
R3672 R1353 R1633 L1607
123
D
B
R2611 C1504 C1505 C1506 R1806
R2212 R1673
A
R2603 R1808 C1688 C3822
23
22
R3033 R2215 C1507 C1712
R2610 C1501 R1643 R1624
DDCCLK-IN2
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 R1810 R1677
L2809
U2802 R2717 C1502 U1302 C1713 C1640 C1686 C1687 L1615
R2216
R2219 C3756
R3068
C3788 R3209 R3208 R3207 R1812
L1619
ADV7850 R1644
789
R1623
C2821
R3032 R2218
R2631 C2655
L2810
C2820
C2656
L2807
B R1814
L1606
R3020 C3011 R2720 C3205 R3211 R1410 R1411 R1676 L1608 C3823
R2802
C3012 R2629 R3695 R1816 C1637
C3406 R3022 E A U1801
+5V-IN3
+5V-IN6
+5V-IN1
C1638
+5V-IN2
C3422 R3021 A R2646
R2644 DDCCLK_IN1
R3696 R1311 C1808 R1820 R1675 C1704 L1605 L1613
C3767
R2615
R3697 R1316 K4T51163QJ L1618
R2620
C3401 R2643 R2830 R2829 R2833 R2832 R1325
N2601
DDCDATA_IN1
R2632
OUTG VCC
R3698 D1301 R1304
C2818
C2819
C3402 R2649 R2648 R1365 C1641
R2626
R2622
R2630
R2627
C2808
R2628
C2807
C2604
R2624
R2623
L2801
R2616
R1642
R2625
C3702
R2803
R1725 R1726
R2211
L2802
R3012 R3699 R3701 R1328 D1302 D1314 R1364 R1654
U3001
R2651
R2652
R2205 R1366 D1316 R1720 R1722 R1724 R1699
R3401 R3700 D1303 R1330 R1721 R1723 R1647
D3005
R2207 1 Q3202 D1315 R1367 C1697 C1698
C1705
R3702
R1700
D1615
D1304 R1329
R2639
R2640
R2645
R2647
R2650
C2659 7 D1602 D1601 D1611
U2802
B D1317 R1361
C2816
C2817
R3204
C1706
C3403 C3708 R2210 U2204 D2802 D2801 D2804 D2803 R1362R1368 R1648 R1641 R1653
C3424 C2207 R2601 +5V-IN5 R1332 R1317
R1004
R1016
R1012
Q1307
NJM2846DL3-18
+5V-IN4 C1652
R1003
R1015
R2206
R1011
R1006
R1014
R1010
C2206 R1002 Q1301
R1039
R1040
Z3001 C2202 R2204 C2215 R3203 C3201 D1307 D1308 D1311 L1609
CECCOM
DDCCLK-IN3 R1007 Q1306
R2801
C2201 R1008
Q1302
D3201 R1037 R1043 D1305 D1306 D1309
R2221
D3006 D3001
R1041 D1321D1324
C2204
C3693 D2201 R2237
R1001 HPD-IN2Q1006
R2203 R1038 R1044 D1320
Q1004 Q1008
Q1003 Q1007
C3404 D2202 R1042 N1003 D1312 D1318 D1325
U1603
C3423 K2201 K2202 N1002 N1004
HPD_IN5 D1310 D1319 D1322 D1323
U2201 C2203 R2202
3 R3216
Q1001
C3001
R3003
N2802
HPD-IN6
HPD_IN1
Q1005
N1001
D3003
15
R 217
D3002 C3003
32
N3201 C3002
R
D1605 D1606 D1609 D1610
K3001
HPD_IN4 DDCCLK-IN5 D1603 D1604 D1607 D1608
HPD-IN3 DDCCLK-IN6
U2202
HPD-OUT
Q1002
R1005
R1013
R1009
K3002 DDCDATA-IN5 DDCDATA-IN6 DDCSDA
DDCCLK N1602
N1302 N1303 +5V-OUT
(COMPONENT SIDE)
USB test point
GND
GND
CN4402
J4504
+DATA
-DATA
VBUS
CP4406
CN4402
CP4406
J4511
JACK4400
C4471 G4402
Pb
(COMPONENT SIDE)
94
6. SMPS
DC 5V is not output.
Is there damage in IC4140 YES Replace the IC4140 (TOP258MG) and
(TOP258MG)? D4142/D4143/D4144/D4145.
NO
YES YES
Is there the damage in D4142/D4143/
Is the fuse (F4140) blown? Replace the damaged parts.
D4144/D4145/IC4140?
NO
YES
Is there solder short circuit in the PCB Repair the solder short part of the PCB
board? board.
NO
YES YES
Is there a damaged part? Check the damage of each part. Replace the damaged parts.
95
Operation waveform for each part
SMPS B'D
After primary side rectification After secondary rectifications
(Caution: High voltage, electric shock) Primary drain
BKT4140
M3 OPTION
(Caution: High voltage, electric shock)
L4141 C4148 OPEN
OPEN OPTION
L4140 OPTION
F4140 SQ2014 27mH JP4140 JUMPER D4142 1N4007
JK4140
2
OPEN
live ZD4151
AC INLET
100/200(18*31.5)
4 3 4 3 D4143 1N4007 ZD4147
R4148
Neutral ZJ22B
｡ﾜ ｡ﾜ
2M2
C4143 ZJ39B
C4151
1
0.1/275V ZD4152
｡ﾜ ｡ﾜ D4144 1N4007
ZD4148 ZJ22B
R4140
1 2 1 2
ZJ39B
D4145 1N4007 ZD4153 D4149
JP4141 JUMPER ZJ22B S30SC6MT
OPTION
1N4007
1N4007
ZD4149
R4149
C4149 OPEN C4153
2M2
ZJ39B 3
ZD4154 1N 1
470P/250V
470P/250V
BKT4141 2
C4140
C4141
ZJ22B
M3 OPTION
CHASSIS GND
D4140
D4141
ZD4155
ZJ22B
R4150
1M
ZD4156
ZJ22B
R4141 ZD4157
1M ZJ22B
2
T4140
5600/6.3(NXA)
5600/6.3(NXA)
5600/6.3(NXA)
R4157
R4142 R4154 EER-2834 56
1
1 12
22K-F
OPEN
OPEN
1M
4700N-K
10
OPTION CP4140
100N-K
11 IC4142
R4164 D4147 ｡ﾜ 10 PC123X2YFZ
1N4007
1M OPTION 3 ｡ﾜ ｡ﾜ 9
AC CORD OPTION D4146 ZD4150 C4155 R4158
R4160
R4162
R4163
ZJ5.6B
10/50(NXA) 3K3
C4164
C4162
C4159
C4165
6
C4161
AVRE400 AVRX2000 OTHER AVR ｡ﾜ 8
1N4007 ZJ22B D4148
7
E3 E1C/K E3/E2 U/N/K R4147 1N4007 R4159 C4166
270K 5 5K6 100N-K
JK4140 OPEN O ZD4158
ZJ39B
ZD4159
CP4140 JE202B1T2 OPEN
D4151 OPEN
TR4140 C4156 2200P/250V C4160 100N-K IC4143 C4167
KMB2D0N60SA KIA2431AP OPEN D5.2V
2 3 4 5
OPTION R4161 D5.2V
C4142 1
5
D
3
C
2
X
1
V
BKT4142 6K8-D
DGND HDMI DIGITAL CNT H9
0.01/250V
ZD4160 R4151 R4153 M3 R4165
MTZJ6.2B 3 IC4140 15K 6R8 C4154 OPEN DGND
TOP258MG MAINPOWER
100N-K RLY4140
1
2
S S S S S JZC-36FD
100N-K
100N-K
100N-K
100N-K
330K
6 7 8 9 10 CN4141
R4145 D4150 5P_WIRE(2.5mm)
1M R4152 C4152 1SS133
1K 47/25(NXA)
F4141
C4146
R4143
C4145
C4150
C4147
C4157
OPEN
TR4142 R4156 4K7
2 1
TO POWER TRANS KTC3198G
CP4142 R4155
LWBP1143-02P 10K
C4158
OPEN
SMPS unit
(Unloaded) A B C
Set A B C
96
Personal notes:
97
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK DIAGRAM
WAVE FORM
WAVE FORM
DIR input ③
1
P2
MCLK 75
RXMCK
CH1:D-DATA SCLK L2 76
RX64FS 14
DAC256FS 26
SCKI
U1302 LRCK L1 77
RXFS 33 7
ADV7850 N2
DAC64FS BCK
I2S0 83
RXI2S0
HDMI N1
DACFS 34 6
LRCK
Receiver I2S1 82
RXI2S1
M2
I2S2 81
RXI2S2
M1 U2404
I2S3 78
RXI2S3
PCM1690
SPDIF P1
RXSPDIF 73
RXSPDIF DAC
30
DACDATAF 8
DIN1
U1601 U2205 DACDATAC 29 9
DIN2
ADV8003 5M80ZT100C5N 28
TX_ARC1_OUT B7 96
ARCSPDIF DACDATAS 10
DIN3
HDMI Audio PLD
Transmitter ① DACDATASB 27 11
DIN4
U2602
DM860A COAXIAL1 69
C1
97
NETWORK 71
DATAF
OPTICAL1 O1
PROCESSOR DATAC 98
72
OPTICAL2 O2
AV2CTRL1
AV2CTRL0
AV2DATA0
99
DATAS
DIR output
AV2CLK
35
DIRC1
10
36
DATASB
DIRC2
37
R2 R1 T1 U1 DIRO1 DSP1OUT64FS 14
2 38
DIRO2 DSP1OUTFS 15
12 13 15 14
CH1: DATA 32 29 41
RX3 RX6 DIRARC
MCLK
BCK
LRCK
DIN
3 75 98
DSP1IN64FS DSP1IN64FS DSP1OUT64fs
33 30 41
RX2 RX5 DIRRXSPDIF 4 97 99
U2401 DSP1INFS DSP1INFS DSP1OUTfs
35
RX1 U2203
PCM5100 PCM9211 DSP1INF/FL 8 100 DSP1INF/FL DATAF 86
37
DAC RX0
DIR/AD
MPIO_A1 4 54
SLRCK1 94
103 DSP1INLR DATAC
OUTL
OUTR
3 55
MPIO_A2 SBCK1 7 95 73
DSP1INCSW/SW DSP1CSW/SW DATAS
17 47
CH2: fs DOUT DATADIR1 74 88
6 7 DSP1INS/C 6
DSP1INS/C DATASB
18 44
LRCK FSDIR1 5
DSP1INSB/SL 101 DSP1INSB/SL U2001
19 43
BCK 64FSDIR1
DSP1IN-/FR 16 77
DSP1IN-/FR ADSP21487KSWZ3B
IC4200 SCKO 20 42
256FSDIR1 DSP
54 55
ANALOG Lch R2A15218FP A/D_L 47
VINL DSP1IN-/SW 18
DSP1IN-/SW
CH3: 64fs ANALOG Rch ANALOG VOL A/D_R 55 48
VINR
&SW
DAC input Detail A
DAC256FS
3
CH1: DATA DACDATAAF
A DAC64FS
CH2: fs DACFS
DIRO1
CH3: 64fs 64FSDIR1
FSDIR1
CH4: 256fs
DATADIR1
98
LEVEL DIAGRAM
AVR-E400/X2000
LEVEL DIAGRAM
FRONT ch
R2A15218FP
ANALOG H/POUT
LINE IN ＋ SPEAKER
GAIN
＋
PCM1690
PCM9211 ＋ ＋
PLD D/A
A/D － －
DSP
ZONE2
(AVRX2000 ONLY)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB +20dB
1.41Vrms PCM1690 DOLBY LIMIT LEVEL (ALLch-3dBFS)
PCM9211 0dBFS
+29dB
0dBFS=1.06Vrms
-35dB
+10dB +10dB
-10dBFS
-10dBFS
-20dBFS(DIG.IN)
LINE IN
200mV 0dB -26.5dBFS(A/D IN) 0dB
-2.0dB
-20dBFS +3dB -2+6.5=+4.5dB
-12dB -20dBFS
H/POUT
-2+12=10.0dB 79.6mVrms
A/D IN
-10dB -10dB
50mVrms
-2+12+6.5=16.5dB
(-26.5dBFS) -30dBFS
+3dB
-30dBFS
SW NO
-32dBFS(DIG.IN)
-20dB -38.5dBFS(A/D IN) -20dB
MASTER VOL 00dB時のGAIN設定
-40dBFS ･SW:YES時(DIGITAL) -2dB =-2.0dB
･SW:YES時(ANALOG) -2dB+ 6.5dB=+4.5dB
-40dBFS
･SW:NONE時(DIGITAL) -2dB+12dB =10.0dB
･SW:NONE時(ANALOG) -2dB+12dB+6.5dB=16.5dB
-30dB ① ② ③ -30dB
①:VOL=0dB(表示値)時の基本OFFSET
②:SW NON時のOFFSET
③:AD入力時のOFFSET
-40dB -40dB
99
AVR-E400/X2000
LEVEL DIAGRAM
CENTER ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋ ＋
PLD D/A (OTHER AVR)
－ －
MUTE PRE OUT
DSP
EXT IN
(OTHER AVR)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB 1.41Vrms +20dB
DOLBY LIMIT LEVEL (ALLch-3dBFS)
0dBFS
+29dB
+10dB +10dB
-10dBFS
-20dBFS(DIG.IN)
-2dB
EXT IN PCM or DD Config1
200mV 0dB -26.5dBFS(A/D IN) 0dB
PREOUT
-20dBFS +3dB 159mVrms
-2+6.5=4.5dB
-26.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
100
AVR-E400/X2000
LEVEL DIAGRAM
SUBWOOFER ch
R2A15218FP
MUTE PRE OUT
GAIN
PCM1690
＋ ＋
PLD D/A
－ －
DSP
+30dB
MAX SIGNAL LEVEL
Config1 DOLBY LIMIT LEVEL (ALLch-3dBFS)
0dBFS
+20dB 0.88Vrms +20dB
0dBFS
+10dB +10dB
-10dBFS
PREOUT
317mVrms
200mV 0dB 0dB
PREOUT
-20dBFS 159mVrms
-2+(20-6)=12dB
INPUT : -20dBFS(DIG.IN) PCM -34dBFS(PCM.IN)
-10dB -10dB
200mV(A/D IN) -40.5dBFS(A/D IN)
-30dBFS
INPUT:-30dBFS DD LFE -40dBFS(DIG.IN)
-20dB -20dB
DD Config1
+9.5dB
-40dBFS
-30dB -30dB
-50dBFS
-40dB -40dB
101
AVR-E400/X2000
LEVEL DIAGRAM
SURROUND ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋ ＋
PLD D/A
－ －
DSP
+30dB
MAX SIGNAL LEVE SP OUT
4.48Vrms/8Ω
0dBFS
+20dB 1.41Vrms +20dB
0dBFS
Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS) +29dB
+10dB +10dB
-10dBFS
-23dBFS(DIG.IN)
PCM or DD Config1 -2dB
200mV 0dB -29dBFS(A/D IN) 0dB
-20dBFS +6dB -2+6=4dB
-2+6.5=4.5dB
-29.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
102
AVR-E400/X2000
LEVEL DIAGRAM
SURR.BACK ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋ ＋
PLD D/A
－ －
DSP
+30dB
SP OUT
NON CLICP MAX SIGNAL LEVEL 4.0Vrms
4.48Vrms/8Ω
SP OUT(D/A OUT)
0dBFS
1.41Vrms DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
+20dB +20dB
0dBFS
+26dB
+10dB +10dB
-10dBFS
Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
200mV 0dB 0dB
INPUT : 200mV(A/D IN) -20dBFS
Mch STEREO -2+3+6=+7dB
-26dBFS(DIG.IN)
DD EX Config1 +3dB -2+3=1dB
-2+6.5+3=7.5dB
-10dB INPUT : -23dBFS(DIG.IN) D.D -29dBFS(A/D IN) -10dB
-30dBFS
-32.5dBFS(DIG.IN)
DD EX Config2
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
103
AVR-E400/X2000
ＬＥＶＥＬ ＤＩＡＧＲＡＭ
ＺＯＮＥ２
R2A15218FP
from
F-ch
from
TO DA SB-ch ＋ SPEAKER
LINE IN ＋
MAIN
NET/USB DAC
D/A
ZONE2
(AVRX2000 ONLY)
+30dB
SP OUT
0dBFS
2.0Vrms PCM5100 MAX SIGNAL LEVEL 2.00Vrms
+20dB +20dB
0dBFS
+10dB -10dBFS +10dB
-20dBFS(DIG.IN)
-2.0dB
LINE IN
200mV 0dB 0dB
-20dBFS PREOUT
-10dB -10dB
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
104
BLOCK DIAGRAM VIDEO B'D GND DIAGRAM
AC CORD
AUDIO IN B'D
TU_PACK
SPK_RLY_GND
HDMI B'D
VOL_IC
MAIN_CPU
ADV8003-3
ADV7850
DM860A
A_PLD
DSP
DIR
DAC
D_GND D_GND D_GND
HDAM B'D
FRONT R GND
FRONT L GND
SPK_RLY_GND
SBR GND
SBL GND
SR GND
SL GND
C GND
V_GND
SMPS_S3
H/P GND H/P GND
PRE GND
HIGH GND
SMPS B'D
D_GND
F_CNT_B'D
VIDEO B'D
PRE_OUT B'D(OTHER AVR)
RET_GND
AMP +B S1 SPK_RLY_GND SPK_RLY_GND
RET_GND RET_GND
SPK B'D
H/P GND
D_GND
AGND
VIDEO AUDIO
7CH AMP B'D
D_GND
H/P GND
AGND
VOLUME B'D
FUNCTION B'D FRONT B'D
D_GND D_GND
USB B'D
V.AUX (OTHER AVR)
MIC F_HDMI B'D
CHASSIS
HP B'D
105
POWER DIAGRAM
S1(AMP +B)
AC OUTLET
S2(+8V,-8V)
OTHER AVR
MAIN TRANS
AC CORD
OTHER AVR
5M80ZT100C5N
MFI337S3959
MAIN PWR ON
106
WIRING DIAGRAM
HDMI B'D
TUNER PACK
AUDIO IN B'D
SPK B'D
HDAM B'D
SMPS B'D
FRONT CNT B'D
VIDEO B'D
PRE_OUT B'D (OTHER AVR)
OTHER AVR USE
7CH AMP B'D
40P
VOLUME B'D
FRONT B'D
SELECT B'D
USB B'D
V.AUX (OTHER AVR)
H/P B'D MIC 23P
CHASSIS
107
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PRINTED WIRING BOARDS
Lead-free Solder
A When soldering, use the Lead-free Solder (Sn-Ag-Cu). A
B B
SMPS (A SIDE) SMPS (B SIDE)
BURRING
BURRING
C MTG C
BKT4141
SCREW AREA
SCREW AREA
CP4140 MTG
NEUTRAL LIVE BKT4140
JK4140
D D
C4140 R4140
Sec. 470PF/250V
Sec.
C4141
470PF/250V
Pri. Pri.
RLY4140
F4141T6.3AL/250V
CP4142
7028-07296-101-0
C4157
C4158
SMPS B'D
0.1UF/275V
E FC4141A FC4141B
E
C4143
D4150
Pb BONDING
WHITE
MAINPOWER
MAINPOWER TR4142
BONDING
DGND R4156R4155
C4142 DGND DGND
CN4141
FC4140A FC4140B 0.01UF/250V D5.2V
L4140
F4140 T2AL/250V
D5.2V DGND
D5.2V
CAUTION : REPLACE WITH SAME TYPE FUSE(S). D5.2V
F ZD4154 ATTENTION : UTILISER UN FUSIBLE DE RECHANGE ZD4159 F
MTZ5.6B
DE MEME TYPE.
ZD4153
ZD4155
J4150
JP4141
JP4140
L4141
C4165
5600/6.3
ZD4152
ZD4156
BONDING
ZD4151
ZD4157
G G
D4142
D4141
D4143
D4145
R4154
T4140
D4149
30SC6MT
D4140D4144 C4148 C4153
D4147
0.01UF/250V 1000P/1KV
J4155
BONDING
R4141
C4149
0.01UF/250V BONDING
IC4140
BONDING
TOP258MG C4161
C4162
5600/6.3
H C4154 H
R4142
C4159 R4151
R4152
BONDING R4147
R4164
C4151
E2/E1C/N/K 100/400 J4154 C4164
5600/6.3
E3,JPN,U1B 100/200 ZD4150
R4160
R4162
D4146 TR4140
R4163
R4157
R4158
R4145
J D4148
IC4142 C4150 J
C4155 R4153
ZD4147
PC123Y22 C4147
IC4143
R4161
C4166
C4146
J4152 C4145
C4160
R4165
ZD4158
ZD4160
C4152
R4159
D4151
C4167
R4143
R4150
Sec.
Sec.
ZD4148
R4148
Pri.
Pri.
J4145
SCREW AREA
K K
ZD4149
R4149
IN ICT OP ADJ FI C4156 MTG
2200PF/250V BKT4142
SMPS PCB
BAR CODE 7020-07296-000-0S
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
108
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A FRONT (A SIDE) A
Pb FRONT B'D J4486
C4431
7028-07293-101-0
C4432
BKT4400 J4453
C4415
C4416
CN4400
J4498
Pb
J4434
VkkGND
CP4400
R4457
OPEN
OPEN
OPEN
J4516J4517J4518 J4519 BURRING
FRONT_IRIN
VKK
FIL1
FIL2
J4419
POWERKEY
J4455
V.AUX/GND
R4420
SWM3.3V
GRNLED
REDLED
MICGND
D/MGND
D/MGND
H/PGND
MICDET
FLDATA
H/PDET
B/PIRIN
J4469
R4459
VSELA
FLRST
VSELB
J4503
FLCE1
FLCLK
J4413
M3.3V
J4456
ISELB
ISELA
R4458
KEY3
KEY2
KEY1
A+7V
H/PR
H/PL
A-7V
FL4400
J4414
CP4401 J4520 J4521 J4522 J4523 J4524 J4525
MIC
J4466
R4461
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
B J4491 J4481 J4512 B
J4489 R4471
POWERKEY
J4463
STBY LED(G)
STBY LED(R)
R4449
SWM3.3V
ISELA
ISELB
C4412
D/MGND
J4443
R4422
C4410 J4513 R4472
LED4401
J4444
LED4400
J4435
J4430
ZD4407
J4451 J4514
R4442
J4424
R4444
J4505
R4443
J4468
J4477
J4490
J4423
J4470
J4494
J4420
J4433
J4515
J4499
ZD4406
J4432
J4484 C4409
J4464
J4445
J4527
J4526
J4426
J4493
J4449
J4431
R4414
J4508
J4482
J4475
RMC4400 J4448
C C
C4417
J4471
ZD4400 J4462
J4487 SW4410
J4472 J4529
J4530
J4531
J4501
J4446 J4543
J4467
J4532
J4454
J4452
J4447
J4509
J4450
J4528
J4473
J4510
SW4409 SW4406 SW4401 SW4402 SW4408 SW4405 SW4400 SW4404 SW4407 SW4403 J4465
J4485
J4488
J4502 J4459
J4437
ZD4403
ZD4404
D J4478
J4507
J4533 J4534 J4545
J4541 J4539 D
C4422
ZD4402 J4535
J4479 C4449
C4423
ZD4401
C4433
J4542
Q4404 C4439
J4410
J4407
J4408
J4409
J4411
GND
Pb D4402 GND
FRONT PCB
R4426
J4504
+DATA J4538
-DATA
C4434
D4401 VBUS
JP4492 ZD4405
C4420 C4419 CP4406
J4536
TOP SILK
CN4402
G4400 J4537
470/63(12.5*20)
C4447
JP4493 J4544
7020-07293-000-0S
C4421
J4540
E BONDING J4511 E
C4460 JP4490
BAR CODE
JACK4400 C4438
C4462
C4463
C4459 C4471 G4402
JP4491
JACK4401 IN ICT OP ADJ FI
Pb
G4401
F F
FRONT HDMI CABLE (A SIDE) FUNCTION (A SIDE) GUIDE R (A SIDE) TOP GUIDE (A SIDE)
G TOP_GUIDE B'D G
7028-07293-601-0 Pb
CLAMP 406
FRONT HDMI CABLE
Pb
ST/BY
FUNCTION B'D
Pb
GUIDE R
7028-07293-201-0
F/H_GUIDE B'D 7028-07293-501-0 CLAMP 402
R
7028-07293-701-0
LED4402
ZD4409
H SW4411 SW4412
H
CLAMP 401
G
R4490
BACK
Pb
J4404
STBY LED(G)
STBY LED(R)
POWERKEY
ZD4408
ISELA
R4489
ISELB
R4464
R4479
SWM3.3V
J J
J4405
D/MGND
CP4405
GUIDE L (A SIDE)
CLAMP 403
CTN (A SIDE)
K K
CLAMP 405
CNT B'D7028-07293-301-0 Pb
PCB
STBY LED(R)
STBY LED(G)
CP4402
POWERKEY
SWM3.3V
D/MGND
ISELB
ISELA
GUIDE LPb
STBY LED(R)
STBY LED(G)
POWERKEY
SWM3.3V
D/MGND
CP4403
ISELB
ISELA
L
7028-07293-401-0 L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
109
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A FRONT (B SIDE) A
CLAMP
VKKGND
OPEN
OPEN
OPEN
C4441
FIL1
FIL2
VKK
V.AUX/GND
MICGND
D/MGND
FLDATA
POWERKEY
VSELA
MICDET
D/MGND
SWM3.3V
FRONT_IRIN
GRNLED
REDLED
H/PGND
MIC
FLCE1
M3.3V
ISELA
FLCLK
VSELB
H/PDET
A+7V
NC
NC
KEY2
KEY3
B/PIRIN
NC
ISELB
FLRST
H/PR
H/PL
R4416
A-7V
NC
NC
NC
NC
NC
NC
R4403
KEY1
NC
C4442
Q4402 R4415 C4479
B B
C4408
R4407
R4408
J4458 R4404
SWM3.3V
STBY LED(G)
D/MGND
STBY LED(R)
POWERKEY
ISELA
ISELB
C4411
R4437
CB4400
R4438
C4425 C4427 C4428 R4436
C4414
R4405
R4406
R4425 C4429
R4411
C4430
Q4403 C4413
R4410
C4477
C4478
R4423
C4426
R4418
CB4401
R4439
R4491
R4421
R4419
D4400
Q4400
R4435
Q4407 R4433Q4406
C4418
R4446 Q4405
C4424
C R4445 R4432
R4431
C
R4441 R4402
R4412
Q4401
R4440
Q4408 R4409
R4434 R4427 R4447
R4430
J4474
C4435 R4417
R4424
R4468 R4448
R4413
D C4443 D
F4400
R4467
R4470
R4480
R4475
R4465
BD4403
C4440
NJM8080
GND R4429
GND
C4453
R4482
R4428
+DATA
IC4400
-DATA
VBUS
R4451
JP4401
L4401
BD4410 R4488
BD4401
C4436 BD4409 R4487
C4437 R4476 JP4402
R4453 D4411D4412 F4401 C4455 BD4402
C4444
R4469
R4478
C4448
R4452 R4473 C4474C4473 6125FF500-R
D4413 F500mAL D4404
R4466 R4477
R4486
E R4450 C4470 D4403 D4406 C4456 E
C4
R4455
46
R4456
9
R4454 BD4407 D4405
C4472 BD4411
D4408
D4410
F F
G TOP GUIDE (B SIDE) GUIDE R (B SIDE) FUNCTION (B SIDE) FRONT HDMI CABLE (B SIDE) G
R
H H
C4450
C4451
R4460
C4476 R4462
R4463
G
C4475
STBY LED(G)
STBY LED(R)
POWERKEY
ISELA
J ISELB J
SWM3.3V
D/MGND
C4446
C4445
GUIDE L (B SIDE)
K
CTN (B SIDE) K
STBY LED(G)
STBY LED(R)
POWERKEY
SWM3.3V
D/MGND
STBY LED(G)
STBY LED(R)
ISELA
POWERKEY
ISELB
SWM3.3V
D/MGND
ISELA
ISELB
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
110
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B
MAIN (A SIDE) B
SBL SBR SL SR C FL FR
C C
JACK4000 C4022 JACK4001 C4019 JACK4002 C4015 JACK4003 C4013
JACK4004 C4009 JACK4005 C4005 JACK4006 TU_GPIO2/TUNED
TU_RST/ST GPIO2
J4029 RST
TU_SEN SEN
RLY4004 J4121 TU_SDIO/SDA
D D
J4117
TU_SCLK/SCL SDIO
J4119 RLY4003 RLY4002 RLY4001 C4002 SCLK
J4107 TU_GND TU_+5V
TUNER_R CP4007 TUNERR
TU_GND TUNERL
J4104 TUNER_L
C4017
C4016
C4025
C4024
RLY4000
PACK4000
J4100 C4076
J4102
MAIN PCB
R4009
R4008
C4030
C4028
R4012
R4013
J4108 J4105 J4101 J4110
7020-07292-000-0S 9P
L4000 L4001 J4103
R4011 C4020 J4115
C4003 C4070
R4002 J4106
C4006
L4005
C4007
E E
R4004
R4015
R4014
R4010
SCREW
3X8
C4011
C4010
C4023
L4006 R4003 C4000 J4120
L4002
L4004
R4005
L4003 J4118
SCREW SR BKT4143
3X17
J4098
SL
R4007
R4006
C A_-7V
A_-7V
FR RET_GND
RET_GND
J4097
FL J4095 RET_GND
CN4211 A_+7V J4122
A_+7V
CN4213
MAIN PCB DA_+5V
NC
GND
7028-07292-101-0
SBR
TRG_GND
SBL
F J4065 J4091
ZD4002
TRG_+15V F
J4092 IN ICT OP ADJ FI ZJ6.8B
Pb
BONDING
CP4006
BONDING
C4054
R4001
R4000
10000/71
J4096
R4022
R4029
R4017
R4020
R4019
R4018
R4016
R4053
MAIN B'D
D4007
J4000
J4001
C4052
10000/71
7028-07292-101-0
J4094
J4072
C4062
C4053
3300/16
DC OUT MODEL ONLY J4070
2200/25
R4027
R4024
R4025
R4026
J4071
R4023
C4065
4700/25
J4069
11P
J4051
G G
J4043
C4049
HDAM_GND
HDAM_GND
C4059
MUTE+7V
4700/16
H/P_GND
H/P_GND
R4031
RLY_H/P
RLY_C/S
RLY_SB
VAGND
VAGND
H/P_R
RLY_F
A_-7V
A_-7V
H/P_L
V+5V
V+5V
V-5V
V-5V
C4058
D4029
D4028
D4027
D4025
J4064
R4032
D4009
D4012
R4030 R4028
J4075 D4036
CN4212 J4066
J4093
PREGND C4057
J4046
D4010
D4011
HIGHGND C4067
SCREW
J4087
J4030
D4033
D4030
4700/25
D4034
D4035
J4045
D4038
CP4003
HIGHGND
J4044
J4063 3X8
HIGHGND
J4028
J4027
H -HIGHB
H
CP4002
15P
-HIGHB CP4000
-HIGHB
+HIGHB 19P
C4051
D4037
+HIGHB J4048 J4053
RET_GND
RET_GND
RET_GND
J4047
TRG_15V
TRG_15V
+HIGHB J4049 D4032
+5V_IN
+5V_IN
D4031
+8V_IN
+8V_IN
-5V_IN
-5V_IN
-8V_IN
-8V_IN
VGND
VGND
J4026 C4066
D4016
ZD4001
D4015
J4041
C4061
J4042
D4014
D4021
ZJ33B
D4020
J4052
SCREW J4025 D4026
J4050
C4060
D4023
3X17 D4013
D4019 J4054
J4021
J4022
J4019
J4020
J4018
J4017
OUT
OUT
OUT
OUT
OUT
J4024
J4023
IN
IN
IN
IN
IN
D4039
G
G
G
G
G
C4050
C4063
C4068 C4064
J4002
J4003
J4004
J4008
J4009
J4010
J4012
J4013
J4007
J4005
J4006
J4014
J4011
J4015
J4016
ZD4000
ZJ33B
J J
D4024
D4017
D4018
D4022
BAR CODE
7805
7905
7808
7805
7908
KIA7805API
KIA7805API
KIA7808API
KIA7908PI
KIA7905PI
IC4000
IC4003
IC4004
IC4002
IC4001
AC AC
- +
K K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
111
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
MAIN (B SIDE)
C C
C4082
C4081 GPIO2
C4080 RST C4029 C4033 C4036 C4039 C4042 C4048 C4044
SEN C4027 C4032 C4035 C4038 C4041 C4047 C4045
C4079 SDIO C4026 C4034 C4037 C4040 C4046
SCLK C4031 C4043
C4078 TU_+5V C4001 C4008 C4012 C4018
TUNERR TU_GPIO2/TUNED C4004 C4021
C4077 TUNERL TU_RST/ST
BD4000 TU_SEN
D TU_SDIO/SDA D
R4042
R4048
TU_SCLK/SCL
TU_GND C4014
TUNER_R D4004
R4046
R4050 TU_GND D4002 D4003
TUNER_L D4001
R4051
R4043
C4073
R4040
R4041
E E
C4072
D4000
R4039
SR
SL
C
FR
FL
F F
GND
SBR
SBL
A_-7V
A_-7V
RET_GND
RET_GND
RET_GND
A_+7V
A_+7V
DA_+5V
NC
TRG_GND
TRG_+15V
Q4003
Q4001
Q4000
Q4002
Q4004
G G
+5V_IN
TRG_15V
TRG_15V
-8V_IN
-8V_IN
RET_GND
RET_GND
RET_GND
+8V_IN
+8V_IN
-5V_IN
-5V_IN
VGND
Q4009
Q4006
Q4008
Q4005
Q4007
VGND
+5V_IN
HDAM_GND
HDAM_GND
C4055
C4056
MUTE+7V
H/P_GND
H/P_GND
RLY_H/P
RLY_C/S
VAGND
VAGND
RLY_SB
H/P_R
RLY_F
A_-7V
A_-7V
H/P_L
V+5V
V+5V
V-5V
V-5V
H H
R4035
R4055
R4054
R4034 R4033
J J
K K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
112
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
INPUT (B SIDE)
B INPUT (A SIDE) B
INPUT PCB
7020-07295-000-0S
D4203
R4205
D4207
D4209
R4211
C4210
R4220
R4207
D4202
D4208
D4205
C C
D4204
D4206
R4208
R4550
R4209
C4550
TU_GPIO2/TUNED R4294 R4552
R4206
TU_RST/ST R4293
TU_SEN R4292 R4210
R4232
TU_SDIO/SDA JACK4201 JACK4202
R4216
C4551
TU_SCLK/SCL C4209 C4553 C4204 R4221
TU_GND C4218 R4219 R4218 R4551 C4211
D5V(MX) C4552
25P
TUNER_R SWM5V(MX) R4217 TU_GPIO2/TUNED
TU_GND REMOTE3.3V TU_RST/ST
TUNER_L C4217 232OMI TU_SEN
C4216 232IMO R4231 TU_SDIO/SDA
D C4212 TRG1 VOL_DATA TU_SCLK/SCL D
C4554
C4219 C4215 M/DGND VOL_CLK R4230 R4226
R4228
C4213 C4214 R4233 TU_GND
M3.3V VOL_LATCH R4229 R4227 TUNER_R
KILLR SWM5V(MX)
RC_OUT TU_GND
BT_LINK D5V(MX) TUNER_L
VOL_DATA FRONT_IR KILLIR
VOL_CLK RC_IN RC_OUT
BAR CODE
VOL_LATCH CN4700 BT_LINK RC_IN
C4245
SWM5V(MX) MUTE3.3V
FRONT_IRIN
7P/13P
RC_OUT D5V(MX) REMOTE3.3V
BT_LINK 232OMI
KILLIR 232IMO
CN4703
FRONT_IRIN TRG1
R4249
R4251
MVOL_DATA
R4252
RC_IN
R4250
R4553
R4360
E MUTE3.3V MVOL_CLK E
REMOTE3.3V M3.3V
232OMI M/DGND
232IMO A_+7V
TRG1 A_+7V
9P
C4296 MVOL_DATA A_-7V
MVOL_CLK A_-7V
IC4206 M3.3V DA_+5V R4332
C4269 M/DGND DA_+5V R4354
A_+7V
A_+7V
C4281 A_-7V
A_-7V CP4200
C4293 DA_+5V
R4364
R4367
F DA_+5V D5V(MX) F
SWM5V(MX) A_+7V
IC4200
R4347
R4341
REMOTE3.3V C4280 C4295
R4359
A_+7V A_+7V
232OMI A_+7V C4282 C4290
C4236
232IMO A_-7V
15P
A_-7V A_-7V
C4234
TRG1 A_-7V
C4232 C4284 M/DGND MX_L
MX_L
R4236
M3.3V AGND PRE_MUTE
EXT_FR KILLR AGND MX_R MUTE_Z2
CP4202 AGND C4288 RC_OUT MX_R AGND TU_GPIO2/TUNED
EXT_FL BT_LINK AGND R4363
NC NC TU_RST/ST
AGND C4275 FRONT_IR TRG_GND TU_SEN
EXT_SW RC_IN R4237 TRG_GND TU_SDIO/SDA R4287
TRG_+15V TRG_+15V
A_-7V AGND CP4203 TU_SCLK/SCL R4348 A_-7V
G EXT_C C4304 PRE_MUTE R4277 A_-7V G
7P
A_-7V AGND
RET_GND C4230 MUTE_Z2 R4349 RET_GND
RET_GND EXT_SR TU_GPIO2/TUNED RET_GND
RET_GND C4235 C4233 AGND TU_RST/ST R4336R4344 R4276 RET_GND
R4257
R4244
R4248
R4245
EXT_SL TU_SEN A_+7V
17P
A_+7V AGND TU_SDIO/SDA A_+7V
11P
A_+7V EXT_SBR C4294 R4275
DA_+5V TU_SCLK/SCL DA_+5V
NC C4231 AGND NC
TRG_GND EXT_SBL R4274 TRG_GND
TRG_15V TRG_15V
C4283
C4228 R4262 R4273
CP4201
H R4272 H
11P
C4229 C4287
AGND CN4701 EXT_FR
C4246 R4271 R4270
AGND C4227 R4261 AGND
INPUT B'D AGND
AGND C4243 VOL_MUTE
MIC_IN VOL_MUTE AGND
EXT_FL
AGND
R4269
CP4204 AGND
7028-07295-102-0 ZONE2_L
AGND
MIC_GND
VAUX_R
MIC_IN
MIC_GND AGND EXT_SW
AGND
R4268
R4267
VAUX_R AGND EXT_C
IN ICT OP ADJ FI ZONE2_R C4244 AGND ZONE2_L
AGND
Pb
MUTE_Z2 VAUX_L AGND AGND R4266
MUTE_3.3V RET_GND VAUX_L ZONE2_R EXT_SR
R4288 RET_GND AGND R4265
PRE_MUTE RET_GND MUTE_Z2
R4289 PRE_SW DA_SBR RET_GND MUTE_3.3V EXT_SL R4264
31P
J CN4006 R4290 AGND C4242 DAGND DA_SBR PRE_MUTE AGND J
VOL_MUTE C4241 DA_SBL DAGND EXT_SBR R4263
R4326 DA_SBL PRE_SW AGND
AGND DAGND AGND EXT_SBL
R4370 AGND DA_SR DAGND
DA_SR VOL_MUTE
R4371 AGND DAGND AGND
AGND C4240 DA_SL DAGND
AGND
AGND
AGND
AGND
AGND
AGND
R4372 DAGND DA_SL AGND
SBR
AGND
SBL
DA_SW DAGND
AGND
AGND
AGND
AGND
AGND
AGND
SR
FR
SL
FL
AGND
SBR
R4373 C4239
SBL
DA_SW
C
DAGND
SL
SR
FR
FL
BURRING R4374 DA_C DAGND
DAGND DA_C
R4375 DA_FR DAGND
DAGND DA_FR
15P
R4376 DAGND
K C4238 DA_FL K
CN401 DA_FL
AGND
AGND
AGND
AGND
AGND
AGND
DAGND
AGND
PRE_SW
BKT4201
SBR
FR
SBL
SR
SL
FL
R4260
C
DAGND
INPUT PCB
C4237 A/D_R
DAGND A/D_R R4259
CN4205
A/D_L DAGND
DAGND A/D_L
PRE_SW
USB_R DAGND
C4226 USB_R
C4225 DAGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
DAGND
SBL
SBR
USB_L
SL
SR
FL
USB_L
FR
C
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
113
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
7CH AMP (A SIDE)
7CH AMP B'D
AGND
AGND
AGND
SBL
AGND
AGND
AGND
SBR
SBL
FR
SR
FL
FL
SL
WIRE G400 G401
C/S DIP
SL
C
7020-07297-000-0S
G401 G402
BONDING
C408
CP401
C SR FR
BKT400 WIRE J590 WIRE
R686
J598
BONDING BONDING
C456
C472
C440
R428
R436
R600
R610
R609
SBR Pb
C424
R427
R558 WIRE R687
R557
BONDING WIRE
R514
R440 R515 R601 R471 R472
J509
Q419
B BONDING B
D418
D417
C504
Q431
R716
R570
BURRING
R566
R710
R644
R715
R613
R484
R711
Q408
Q407
R712
R713
R699
R527
R695
CLAMP 401
R523
Q432 C490 Q480
R480
Q455
R653
Q479
R643
FI
Q467
D406
J591
R652
J589
C488
D405
D412
R696
D435
D436
J401
Q443
D441
D442
R437
D411
D424
OP ADJ
C458 Q444 TP403 C428
R714
R656
R441
D430
C410 Q456 Q468
C442 C476 C474 C426Q420
R434
C460 C454 VR403 C444 VR405 R607 R615
VR402
C492 C486 WIRE WIRE
VR404 R521 R529 VR406 VR407 C508 C506 BONDING
VR401 R572 C470 BONDING
J427
J557
J531
G400
C412
C406 R564
J505
R701
C438
R465
R583
R625 R658
R638
J479
R481
R453
R410
R509
R567
R614
R595
D423
R524
R540
R669
R657
R626
R429 R602 C422
R485
R559
R571
R700
C502
D429
R539
R528
R497
R486
R582
R442
ICT
R438 R720 R516 Q435 R611 G402
R452
R478 R650 R694
R443
R473
Q471
R721 WIRE WIRE
Q483
R552
R717 R568 R525 R451 R645 R688
R495 R577 BONDING BONDING R697
R445 R482
IN
R489 R719 R654
Q472
C518
R538 C468 TP405 R624
R616
R702
R722
R659
Q447
R573
Q459
R487
C436 R718 R723
Q460
R422
R668
C483
R681
J490
Q438 Q423
C435
C451
Q411 C452 TP404 R620 C519
R408 TP402 R667
C467
TP401 C499 Q462 WIRE TP406
R581 WIRE
R530
J432 R505 Q424
R409
Q412 Q448 Q414
Q436 R591 Q449 BONDING BONDINGQ484
R404
R496
R461
R677
C R634
C
J560
C404 R418 J458 J484 TP407
R492 J510
R534
R548 Q426 R448 C484 C500
R663
Q450 Q413 J562
J405
ZD401 Q401 Q425 D431
J500
R574 R621 Q461 D437 Q473
J536
Q437
J404
ZJ5.1A
R488
D401 D419 ZD407 C420
R617
D425
J570
ZD404
R444
ZD413
R592
D413 ZJ5.1A J583 R578 Q474
Q402 ZJ5.1A
R673
R401
C514 ZJ5.1A
J534
R531
R535
R660
R630
R635
R457
R533
JP539
R491
R506
J403
J512
J464
D407 ZD416
R549
JP558
R405
R544
J532
R403 R585 R576 ZJ5.1A R662
C516
JP544
R589
R619
JP494
CN404 R447
R402
R462
J559
R664
R707
R575
ZD410
R499
J406
DC DET4
R705
R490
ZJ5.1A
J578
R421
J566
DC DET3 C513
R678
R456
J514
J448
J552
JP518
ZD419
JP535
JP574
R419
R536
J526
JP520
ZJ5.1A
J474
R703
J436
J422
J410
R628
JP537
J540
J542
J538
J480
J533
JP416
J462
J585
C515
J488
J457
J587
ASO DET
R413
J440
J496
R629
R618
JP468
R671
R661
R709
R708
R704
J516
RADI THERMAL
R446
J519
J565
J571
J543
J415
J482
J564
J492
R414
R543
CP405
J434
J568
TR THERMAL
J460
J465
JP546
J439
R532
J513
R706
J506
J418
JP442
J413
J407
J522
R416
J441
J438
R675
JP572
SBL
J491
J431
J411
J428
J444
J430
J493
R632
R455
R503
J584 NC
J486
J487
J508
J511
C419
J569
R546
J485
J567
R542
J588
SBR
R672
R420
R459
CP402
J429
J517
100/100
C427
R477
J467
J515
C507
R692
J548
R433
D408
R412
C411
C489
R627 R508
D432
R498
C517
R550
J547
J463
R649
C491
C505
SR
J412
C459
J573
J408
J409
D402
J545
SL
D414
R411
J521
C473
J470
D420
C
C475
D D
R606
J461
R563
J443
J437
R454
R670
BAR CODE
C409 FR
J489
J435
FL
J541
C457
C441
R493
J417
C443
J495
D426
R541
D438
Q417
J469
R584
C425 CP403 J563
J561 +HIGHB
J453
+HIGHB
+HIGHB R551
R520 C431 -HIGHB
R608
D403 D427 D409 D433 D439
R679
ZD403 ZD406 -HIGHB ZD418 C495 ZD421
C416 C432 -HIGHB C512
ZD409
C463
J420
J550
J524
J576
D416
J472
R636
J446
C464 ZD412 D421
R507
D415 HIGHGND C496 C511
C448 C479 HIGHGND
J498
C480
J549
J523
J575
J419
ZD402 C415 ZD405 HIGHGND ZD417 ZD420
R593
ZD411 ZD408
J455
C447 ZD414
J497
R463
PREGND
D428
J445
J456
J551
J473
J421
J525
D404 D422 D410 D434 D440
J499
J471
J577
J447
R435 J423 J449 J475 J527 J553 J579
J501 R479 R651 R693
ZD415
C407 R565
J433 C455 J483 C439 C471 J459 C423 J466 C487 J481 C503
J454 J507
R522
J424 R432 J450 J476 J502 J528 R476 J554 J580
R560 R519 R605 R648 R691
J425 J426 J451 J452 J477 J478 J503 J504 J529 J530 J555 J556 J581 J582
E E
R561
R562
R517
R603
R604
R474
R646
R647
R518
R431
R689
R690
R430
R475
C430
C449
C497
C481
C414
C433
C446
C465
C478
C417
C494
C510
C402
C462
R502
R415
R545
R569
R424
R425
R439
R526
R641
R554
R555
R588
R598
R597
R467
R468
R640
R683
R684
R612
R511
R512
R458
R483
R674
R698
R631
R655
B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E
F
7CH AMP (B SIDE) F
SBL C SL FL
FR SR
C453
C525
SBR
C524
C469
C437
C526
C405
C421
D449
C520
D443
C413
D451
D447
C501
C485
D445
C521
D453
D455
C522
C523
C493
C429
C477
C461
C509
C445
D450 D444
D452 D448
G D456
WIRE D454
D446
G
Pb WIRE
WIRE Q405
R500
R501
R586
R587
R449
R464
R733
R734
D457 R407
C403
H D458
H
J592
R732
R731
R590
R547
Q478
Q406
Q418
Q466
Q415 Q442
R685 Q475 R469
Q430
R676 R633 R642 R460 R417 R426
Q454
R510
R504
R553
Q451
Q427
R513 R556 Q403
R682
R639
R423
R730 R729 Q463 R725 R596 R724
J Q439
J
R727
R466 R599 R726
R728
C418
C482
C498
C401
C466 C434
C450
R666 R623 R450 R580 R494 R537 R406
E E E E
C B B E E C B E C B E E C B C B E E C B C B E C B E C B E E C B E C B C E E C B E C B E E C B
C B C B C B C B C B B C
K K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
114
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
F HDMI (A SIDE)
R1205
R1206
D1202
D1203
R1201
D1201
Q1201
Pb
R1204
R1211
N1201
R1209
R1208
R1207
R1202
R1212
C C
Q1202
R1045 C1206 R1203
L1201
L1202
L1203
C1210 R1216
R1215 R1217
C1205
R1214
R1210
R1213
C1208
U1201
AD8195 N1202
C1207
1
AVR_E400/ X2000_F_HDMI 23
HDMI PCB
D D
E E
HDMI (A SIDE)
R2489 C2473 C2465 N3401
N3404 N3601
R2470
R2453
R2454
R2445
CLP1001
R2435
R2469
R2418C2455R2417 U2001
C3758
ADSP21487
R2232
C3755
R2436
R2446
R2472
R2471
R2455
R2456
C2409 R2101 R2001 C3811 C3810 C3813
R2415 C2454 R2416 C3801 N1301
C2421
C3745
C2434 C3799
C2024
C3730
C3748
R2019
R2020
R2120
C2033
C2030
R2490 C2474 C2466 N2001 L3627 L3626
C2482
U2402 C2419
1 23 C3818
R2025
R2024
C2050
R2026
R2028
R2027
R2030
C3753
C2407
C2046
C3791
F R2409 C2002 L3609
F
C2041
L3628
C2408
I O
N3405
R2016 C3726
R2017 R2048 L3610
C2487
R2119
G
N3403
U2406 C2464 C2433 R2006 R2049 10 1 C3605 U3605
C3802 R3611
C3817
C2481 C3750 R2007 C2004 C3812 R3605 C3623
C2485
R2408
R3234
C2006 R2003
C2403
C3629
C3627
R3235
R3252
C3216 R3630 C3633 C3603 C3761
R3224
R2002
Q3206
R3253
R1312
C3816
C3742
C3211
C2438 C2406
R3254
C2426
Q3220 R3223 R2103 R3629 R3609 C3819
R2411 C2412
C3641
DV1.8V C3647
R2104 C3789 C3651
R3633 R3634
C3653 R3641
R3694
R3693
R3692
R3691
R3690
R3689
R3688
R3687
MX29LV160DBTI-70G
C2416
R2011 C2089 R2031 R3639
C2457
R2422
R2421
L3606
L3605
R2033 U3603
L3621
R2105 C2076
Q3205
C2401 C2500
R2029 C2088 C3639
L3622
R2106
R2501
C3214
C2489
R2231 R2107 R2035
R3236 CVBS
C3210 C2013 C3621
R3225 R3221 R3255
R2438
R3237
R2475
R2476
R2460
R2459
R2448
Q3212
C2223 Q3213 R3220 C2090 C3659
C2418 C2227 C2078 Y
C3625
U2401 R3239 L3617
U2003
Q3204 C2080 C3820 C3665
L3618 R3637 C3631
C3675
R3226 R3222
R3219 Q3211 C2082
Q3215
R3656
R2410
C3692
C2437
C2475 C2476
C2467 C2468
R2491 R2492
R2407
G G
C3694
C2498 C3723 Q3629 C3699
U2407
R2406 C2091 R3625 R3626 C3601 C3765
L3601 R3607
Q3209
R2405 R2116 C3649
R3229
R3232
C2449 C2451 C2430 Q3603
R3227 R2115
C2428
C2427
C2424
C2425
C2422
Pb
C3703
R3062 Q3601
R3241
L3602
R3073
R3074
L3403 Q3610
C3019
C R3075 U3601 R3651
R3063
R3070
C3020
R3061
C3725 C2092
R3060
R2437
C3409 R3064 R2114 R1637
C3415 C3022 R2042 MOSI C3688 C3764
R2112 MISO L3613 R3654 C3673
R2500 2 40 N3408 R2043 R3649 HSDA
C2499
R2044
R2046
DSP_CLK
R2018
R2499 C2106 DSP_ICS L3614
C2107 R2108 Q3608 Q1606 TX_SCL
C3405 C3418
C2094 C2095
R2111
R2224 R2223
C3736
R3655
C2212 C2211
R2040 C3637 C3619 HSCL
C3695
C2491 R2109 R2110 TX_SDA
1INF/FR
C3674
C2093 1OUT64FS R1638 R3650
L3401
X2201
1 39 C2032
C3783
1INFS
C2492 R2021 R2022 1OUTFS C2043 Q3611
IN ICT OP ADJ FI C3787
R2276
C3762
C2039 C2044
R3652
C3407 C3416
C2404
C3411 C3414
R2252 R2278 X2001
C2213 R2245 1IN64FSC3700 Q3604
L3402
L3404
C2486 C2488
R2301
C3737
R3029R3028
R3027
C3698
R3025
R2248
7
R3031
R3030
1 C3676 R3657
R3023
R3024
R3018
R3017
R2251
C3009 C2219 U2205 Q3602 Q3609
R1703
R2473
R2474
R2447
R2458
R2457
R3402 N2201 DATAF
H R3026 C3010 C2493
H
HDMI PCB
R3403
R2270
R2249
R2247
D3401 R1409 R1408
R2244
R2256
R2246
R1696
R2240
R2242
R2241
R2269
D2401
R2229
C2217
R2228
R1690
R3404
C1319
C1316 C1315
C1317 C1314
C1320 C1321
C3734 R2419 C2456 R2420 R2271 R1702
C1515
N1601
Q3625
C3774
7020-07298-020-0S MAC ADDRESS LABEL
Q3615
Q3621 R2272 R1649
R3668 MOSI
R3405 R2273 R1680 C1032
C3717 R2230 R3102 HSCL
C1318
L3603 SCLK
N3406 R3663 R3675 R2227 U2203 R2274 R3103 HSDA
R3608
ADV8003_SPI_CLK
C3602
R2286
U1304
U2403 PCM9211
I O
G
C3604 L3604
C3681 R3670
C3690 Q3619
C1471
C2494 R2275 R1698
C1493
R3610
C3780
R2264
ADV8003_SPI_CS
U2207
C3752
R2235
TXFS
C3638 C3620
R1705 R1650
R3085
C2495
R3087
U3002
R1651
R3632
R3095
C3634
C1826
L1801
C3626
R1819
R1818
C1852
R5F56108VNFP
R2807
C1853
R2808
C2803
R2859
R2863R2810
C2853R2860
C3628
C1483
C1499
R2208C2222 C3632 C1473 L1617
C3728
C3689
C3685
R3083 N3001 R2209 R1306 R1315 DV1.8VVD3 VD4
C3727R3213C3207R3212
U3201 7850_INT2 TXI2S2 TX64FS
C1807
R3034 C2218 R1704 R1697 R1308 R1320 R1743
L3607 R3638
ADV8003_SPI_MO
R3045 R3096 1 R1707 R3631 R1307 R1319 TXI2S1 TXMCK Q3630 C3769
G 7 BCLK C3770
C2805
VD0
C2804
R1652
C2669
R3043
R3042
D C2811 C3652
R1309 R1314
TXSPDIF C1695
VD5
TXI2S0
C2629
C2806
ADV_SPI_MI
C2672
7850_INT1 C3720
R3640
R3037 I O U2806 R1744
R3100
L3608
N2801 L2804 TXI2S3 C1854 VD1
U3604
R2809 VD2
R3051
R1729
U3602
C3686
R2806
C
L2806 R2805
R3099
C3014
R3628
N
R
P
R3076
C3744 C1486
C3015 C3016
C1605
L1602
R1682 VD7
H
G
D
C
B
E
F
A
1
M
C1833
K
L
J
L3615
L3616
C1305
R1417
R1414
R1415
C1490
R3627
11 R2818
Q3617
C3712
C3650
Q2601
Q2602
R2602
C2627
X3001
C2668
C1387
123
C3672 R2819 VD6 R1693 R1694
R3039
L3619 C3622 R1684
C3724
R3210
CB
C1729
C3203 N3002 R2617 C1393 R1352 R1807
J J
R2721 R2707
Q3626
R1667
R3660
R3059 R3662
R2705
R2701
R2704
R3666
R3673
C3204 R1351 R1645 C3768
R3058 L3620 CR R1809
R2614
C1304 R1679 R1646
AC
AB
C1508
AA
W
M
R3647
H
R
P
G
Y
V
R1811
L
T
J
R3057 R3084 C2825 C2810 C3640 Q3614
R1668
N2602 C1303 R1632
789
R3086 Q3607 R1813 1
AC
C1302
R2635
R2607
C3018
R1683
R3050
R3098 2
SF_CS
C3797 R3679 R3092
R3682 R3088 1
R3094
AB
C2814 6
C2809
U3608
N3407 R1817
2108 19 12 7 3 0 0
R3097
AA 3
R3090 R3676
34 4 4 4 41 1 2 1
R2865
R3683 C2813
C3017
C2625
C2678 R1815 4 R1695
8003_INT1
C C3 C3C3 C3 C34C34 34
C3697
R2864
Y
R3669 C1309 U1802
L2601
5
C
W
C3806 R1681 8003_INT2
R3648
C3792 V
R1666 K4T51163QJ 6
C2824 Q3606
U 7
SF_MISO
Q3627
Q3620
R3653
Q3613
T 8
R2834
R3659
R2831
C1034 R1689 9
8003RESET
R3680
R3661
R2713
C1503
10
C3701
C2624 R1403
DM860A
8003_INTO
R2822
R2826
R2824
C2812
R2813
R2812
R1625
U2602
X1601
C3804 C2626 C3696 7850RESET
R1349 C1500
R1687
R2711
R3681 C1509 R1404
TX_XTALN
C1702 C1703
U2603
R3658
R3678 R2608 3002RESET U1001 C1510 R1686
D3602
R2709
J
H27U1G8F2BTR C1312 R1338 TX_XTAL
U2601 C2823
C2822
L2808
H
R3665 ADV3002 G
C1517 17
D3601
R1360
C1834
C3795 R2613 C1512 X1301 F 18
R2609 Q3612 R1357 19
TX_TEST1
E
DDCDATA-IN2 C3677
M
N
H
R
P
D
C
B
E
R1678
A
C1511
L
J
R3703 U1601 20
R2214
D
C
R1344 21
R1626
R2213 ADV8003
R3019
R3672 R1353 R1633 L1607
123
D
B
R2611 C1504 C1505 C1506 R1806
R2212 R1673
A
R2603 R1808 C1688 C3822
23
22
R3033 R2215 C1507 C1712
R2610 C1501 R1643 R1624
DDCCLK-IN2
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C3790 R1810 R1677
K K
L2809
U2802 R2717 C1502 U1302 C1713 C1640 C1686 C1687 L1615
R2216
R2219 C3756
R3068
C3788 R3209 R3208 R1812
R3207
L1619
ADV7850 R1644
789
R1623
C2821
R3032 R2218
R2631 C2655
L2810
C2820
C2656
L2807
B R1814
L1606
R3020 C3011 R2720 C3205 R3211 R1410 R1411 R1676 L1608 C3823
R2802
C3012 R2629 R3695 R1816 C1637
C3406 R3022 E A U1801
+5V-IN3
+5V-IN6
+5V-IN1
C1638
+5V-IN2
C3422 R3021 A R2646
R2644 DDCCLK_IN1
R3696 R1311 C1808 R1820 R1675 C1704 L1605 L1613
C3767
R2615
R3697 R1316 K4T51163QJ L1618
R2620
C3401 R2643 R2830 R2829 R2833 R2832 R1325
N2601
DDCDATA_IN1
R2632
OUTG VCC
R3698 D1301 R1304
C2818
C2819
C3402 R2649 R2648 R1365 C1641
R2626
R2622
R2630
R2627
C2808
R2628
C2807
C2604
R2624
R2623
L2801
R2616
R1642
R2625
C3702
R2803
R1725 R1726
R2211
L2802
R3012 R3699 R3701 R1328 D1302 D1314 R1364 R1654
U3001
R2651
R2652
R2205 R1366 D1316 R1720 R1722 R1724 R1699
R3401 R3700 D1303 R1330 R1721 R1723 R1647
D3005
R2207 1 Q3202 D1315 R1367 C1697 C1698
C1705
R3702
R1700
D1615
D1304 R1329
R2639
R2640
R2645
R2647
R2650
C2659 7 D1602 D1601 D1611
B D1317 R1361 R1362R1368
C2816
C2817
R3204
C1706
C3403 C3708 R2210 U2204 D2802 D2801 D2804 D2803 R1648 R1641 R1653
C3424 C2207 R2601 R1332 R1317
R1004
R1016
R1012
+5V-IN5 Q1307
NJM2846DL3-18
+5V-IN4 C1652
R1003
R1015
R2206
R1011
R1006
R1014
R1010
R1002
C2206 Q1301
R1039
R1040
Z3001 C2202 R2204 C2215 R3203 C3201 D1307 D1308 D1311 L1609
CECCOM
DDCCLK-IN3 R1007 Q1306
R2801
C2201 R1008 D1305 D1306 D1309
Q1302
R2221 D3201 R1037 R1043
D3006 D3001
R1041 D1321D1324
C2204
C3693 D2201 R2237
R1001 HPD-IN2Q1006
R2203 R1038 R1044 D1320
Q1004 Q1008
Q1003 Q1007
C3404 D2202 R1042 N1003 D1312 D1318 D1325
U1603
C3423 K2201 K2202 N1002 N1004
HPD_IN5 D1310 D1319 D1322 D1323
U2201 C2203 R2202
3 R3216
Q1001
C3001
R3003
N2802
HPD-IN6
HPD_IN1
Q1005
N1001
D3003
15
R 217
D3002 C3003
32
N3201
L C3002
L
R
D1605 D1606 D1609 D1610
K3001
HPD_IN4 DDCCLK-IN5 D1603 D1604 D1607 D1608
HPD-IN3 DDCCLK-IN6
U2202
HPD-OUT
Q1002
R1005
R1013
R1009
K3002 DDCDATA-IN5 DDCDATA-IN6 DDCSDA
DDCCLK N1602
N1302 N1303 +5V-OUT
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
115
J
L
F
K
E
B
H
D
C
A
1
1
2
2
66
16 5
C 66
R1727
R1657
1
C R1656
C3766
C3821
R1728R1658
C1645
C1668
C1679
C1633
C1682
3
3
C1634 C1680 C1683
C1635 C1681
C1670
R1660
U1602
R1639
C1636
R1618 C1715 R1662
C1667
R1640
R1621
C1689 C1674
R1617
MX25L12836E
C1647
C1654
C1672 C1656
C1649
C1619 C1621 C1613 C1615
R1634
C1693 R1631
C1701
R1655
R1636
C1692 R1630 R1691
R1627
C1678
C1691 R1629 R1622
R1661
R1659
C1727
C1731
C1690 R1628 C1607
C1676
C1677
R1692 C1675
C1653
R1747
C
C1657 C1673
C1694
16
C3759
C1658 C 23
C1639
C1669
16
C1643 R1741
C1642
32
C1644
R1619
R1615
C1684
C1655
C1661
C1700
C1650
L1614
C1663
R1745
R1740
C1627
C1651
C1671R1746R1742
C1631 C1629
C1709 C1625
C1648
C1716 C1802
C1659
C1801
C1714
4
4
R1739
C1662
C1696
C1707
C1664
R1620
L1611
D1614
D1613
C1622
C1609
C1620
C1626
C1616
C1628
C1611
C1612
C1608
C1630
C1606 C1617C1618
C1610
L1620
C1710 R1669
R1670
C1685
D1612 C1711
U3204
C1614 C1730
C1624 R1716
R1664
R1665
R1685
R1688
R1663
L1621
C1660
L1612
R1718
R1730
R1731
R1717
R1719
R1732
SN74LVC827APW R1733
R1715
R1734
C1844
C1806
C1841
C1839
C1837 C1843
C1809 C1819 C1818
C1646
C1842 C1816 C1817
C1825 C1824
C1838
C1850 C1849
5
5
C1805 C1815
R1821
C1840 C1813
C1835 C1810 C1811
C1848 C1836 R1805 C1823
C1847 C1814
C1812
C1822
C1821
C1846
C1851
R1822
C1820
C1845
C1803
C1465
C1459
C1337
C1335 C1449
C1329 C1454
C1323 C1331
C1444 C1827
C1830
C1832
C1831
C1804 C1439
C1325
C1829
C1828
C1434
C1429
C1516
C1467
C1446
C1456
6
6
C1461
R1340
R1337
R1336
R1339
R1407
C1478
C1424 C1415
C1419
C1036
R1412
C1475 C1327 C1441
C1468 C1333 R1346
R1341
R1402 R1401
R1363
C1401 C1395
R1418
R1324
C1345
C1435 C1430
C1452
C1351
C1440 C1411
C1339
C3778 C3776
R1333
C1350
C1358
C1364
C1469
C1447
C1341 C3779
C1410
C1487
C1491
R1327
C1480 C1484
C1458 C1476
C3781
R1416 R1413
L1302
7
7
C1453 C3777 L1303
C1448 L1304
C1513
C1418 L1305
C3784
C1462 R1343
R1342
R1419
L1307
R3623
C3617
C3786
L1312
C1326 L1306
C1420
C1457 R1323 R1322
R1369 L1309 C3635
C3684
C1460 C1322 L1310
C1425 R1370 C1489 C3773
C1037 L1308 C3771
C1455 C1361 C1494
C1474
C1451
C3611
L1313
R3617
C1514
C1450 C1407
L1311
C1431
C1421
C1416 C1402 R1354
C1470 C1336 C1330
R1350
C1385
C1445 C1306
C1377
C1463 C1342 C1396 C1496 L1301 C3814
C1370 C1391 C1373 C1308
R1345
C1307 C1369
C1443
R1321
C1477
C1388 C1324 C1367
C1485
C1481
C1488
C1492
C1398
HDMI (B SIDE)
C1497
C1381
R1356
R1355
C1466
C1038
D1313
C1301 C1479
R1318 C1472
C3775
Q1303
8
8
R1313 C1482 DGND C3772
VAUX
R1331
C1498
R1303 C1412 DGND
R1334 C3656 NC
C3644 C1495 DGND
Q1304 C1362 CVBS
C1464
U1301
R1335 DGND D5.2V
C1023 VDIPY D5.2V
C3662
116
Q1305 08 DGND DGND
C3785
R1030
R3614
R1029
36 VDICB
R1026
R1027
C1006 C DGND
R3620 DGND
MAIN_PWR
C3680
R3602
C1008 VDICR
R1018 DGND
C1010
C1002 R1033 C3614
R1031
C1001 C1033 R3601 C3763
C1013
C1004
R1017 C1025 C1016
D1001
C1012
R3613
R1023 R3604 R3603
C1007
C1035
C3607
C3613
C3645
Q1009
R1022
C3609
C3610
R1021
C3643
C3616
C3615
R1020
R1036
9
9
R1019
C3646
C1031
R3619
R1035
C3667
R3616
L3625
C1015
C1011
R1028
C1014
C1003
C1027 C3782
R3621
R1025
R3622
R1024
C1005 58
36
R1034
C3655
C1029 C C3682
R3615 C3657
C3678
Q3605
C3668
C3663
C3664 C3669
R1032
C2029
C2027
C1009 C3705
C2606
C3661
C3671
C2235
C2079
C3733
U2605 C2015
C2660 U2604
C2608
A3V56S30FTP-G6
C2085
C2114
C2652
C2031
C2081
C2658
C2237
A3V56S30FTP-G6
C2236
R2036
C2230
C2653
C2086
C2054
C2231
R2039
R2032
C2234
C2228
C2087
C3741
R2034
R2113
C2048
C2057
C2071
C3746
C2072
C3739
C2224
C2670
C2675
C2097 C2064 C2065
C2679
C2073
C2654
R2268
R2267
C2040
C2062
C2225
C2042
C2630
C2066 C2060
10
10
C2058
C2009
C2017
R2050
C2007
C2008
C3757
C2665 C2056 C2053
C2061
C2083
C3751
C2014
R2266
C2051 C2035
C2664
R2037 C3754 C2059 R2023
C2226
C2232
C2049 C2037
C3743
C2666
R2038
C2047 R2010
R2009
C2055
C2034 C2084
C2038
C2674
C2019
C2667
C2075
C2021
C2103
C3711
C2676 C2036
C3760
C2020 R2015
C3749
C2069
C2677 C2028 C2045
C2067
C2025
C2077 C2063
R2716
C2068
C2012 C2026
C2680
C2011 C3747 R2045
R2714 C2023 C2022
C2628
R2718 C2661 R2715
C2216
C2662 5.2V R2014 R2004
R2719
R2008
C2003
C2671
C2663 R2636 USBD- R2013
C2001
Q2202
USBD+ R2012 C2010
C2619
R2638
C2070 C2005
R2226
C3713
C2651 R2604 DGND C2018
R2712
DGND
R2277
R2217 R2710 R2706 R2005 R2041
C2105
C2098
C2099
C2096
C2101
C2622
C2100
C2016
C2102
C2610
11
11
C2052
Q2001
Q2002
C2635
C2239
C2633
R2703
C2618
R2641
C3715
R2222
C2642
R2238
C2615
C2220
C2115
C2616
R2637 C2634
R2642 C2614
C2601
R2708
R2118
R2634
C2238
U2002
C2632 C2643
R2817 C3679
C2113
C2108
C2104R2225
R2702 C2612
R2606
R2605
R2618
C2621 C2638
C2637 C2623
R2619
R2253
C2074
C3740
W9864G6JH-6
C2613 L2603
C2221
C3718
R2633
C2214
R2254
R2117
R2621 C2650C2673
R2047 C2111 C2110
C2602 1:USB_L
C2603 X2601 2:DAGND C3732 C2112 C2109 C3738
C2648
C2649
C2641
C2631
C2640 C2620 C2617 R2612 C2636 3:USB_R L3629
C2609
C3722
C2639 4:DAGND
C3691 5:A/D_L R3240
C2644 C3687 6:DAGND
C3648
7:A/D_R C3735 Q3210
C1216
C2647
C2611
C3729 R3233
12
12
8:DAGND
R3231
R2653 R2654
C2646
C2607
C2645 9:DA_FL C3716
C3683
L2602 10:DAGND R3238 DGND
R2815
11:DA_FR DGND
12:DAGND Q3214 COMP_SW2
13:DA_C V_INB
C2657
R2816
R2814
Q3207
14:DAGND Q3208 V_INC
R3228
C3212
15:DA_SW Q3216 C1219
COMP_SW1
C3213 R3230
R2825 16:DAGND R3244 C1220
C3719
RLY_HP
25:ZVOL_DATA R2856 R2850 17:DA_SL R3243 RLY_SB
24:ZVOL_CLK 18:DAGND Q3218 Q3217 R3246 C1221
R2823 RLY_CS
23:ZVOL_LATCH 19:DA_SR R3251 C3215 RLY_F C1222
C2815
R2820
R2827
R2828
C2801
22:SWM5V(MX) 20:DAGND R3248 RLY_R
F HDMI (B SIDE)
21:D5V(MX) 21:DA_SBL R3242 C1223
C3721
R3249 H/P_GND
20:KILLIR 22:DAGND Q3219
C2802
R3245 RLY_L
U2805
19:RC_OUT C2846 23:DA_SBR R3250 R3247
18:BT_LINK 24:RETGND
C2847
C2845 DC_DET4
C3670
C1212
Q3203
25:RETGND DC_DET3
C2414
R2510
R2508
Q3628
17:FRONT_IRIN C3704 26:VAUX_L
16:RC_IN 27:AGND ASO_DET
R3684
C2605
C3714
C3707
28:VAUX_R TEHRMAL_A
15:MUTE3.3V
13
13
D3007
29:MICGND TEHRMAL_B
14:REMOTE3.3V
R2412 C2402
R2509 C2429
R1706 C2431
C2432
C2435
C2436
C2439
C2440
C3793 R3685
13:232OMI R3009 30:MIC_IN R2413 C2445
12:232IMO 31:MICGND R2432 C2444 C1217
C3202 R2431 C2443
R3686 C3798
Q3003
C2411
11:TRG1
1:TU_SCL
D3009
4:TU_RST
2:TU_SDA
3:TU_SEN
C1211
C3809 R3206 C2442
D3008
6:MUTE_Z2
R3202
10:VOL_DATA C C3731
Q3002
3 C2441
Q3201
5:TU_TUNER
7:PRE_MUTE
R2504
R2443
R2485
9:VOL_CLK
R3054
R3052
R3049
R3047
C 007 C3004 C1218
3 C3006
R3704 Q3623
Q3001
8:M3.3V
R3205
R3201
R 008 C3005
7:DGND 30
R3081 R3107 C1204
10 R3011
C2452
6:A_+7V R3101 C1203
R2414
R3082
5:A_+7V D3004 R3004 R3005 R3007
C3013
R2401
R2402
C1201
C2405
R2433
R3035
4:A_-7V
C1202
R3080
R3044
R3002 R2434
R2505 U2404
PCM1690
R3001 C2415
C3706
C3709
3:A_-7V
C3800
C3794
R3040
R3038
R3036
R3048
R3041
2:DA_+5V
R3077
R3071 C3425 R2451
R3069 R3006
1:DA_+5V
Q3622
R2441 U2405
C2496
C3805 C3803
R3072 C2462
C1209
R3065 C3808 R2466 C2483
R3089
C2484
C1213
C1214
R3078
C3807
R3091
C2471 C2479
R3066 R2465
R3093
R2502
R2503
R3067 R2425
R2486
C2450
R2482
C3206
R2497 R2440 R2498
R3008
C3208
C2459
14
14
C3021
R3671 R2481 R2450
U3203
R2426
R2428 C2460 R2427
R3664 R2495 R2463
Q3616
C2453 C2463 R2488
R2444
R2487
R U2408
C3209
3
Q3624
R 10
C3710
Q3618
31 5
R2424
R3016
R3218
R3214
04 R3674
R3667 C2458
R2423
R3013
U3003
R3014
R3015
U2409
R3079
R2452 C2413 R2439
R2464
U3202
R3106
C2470 C2469
C3796
R2442 R2480 R2449
R3053
R3055
R3056
C2478 C2477 C2410 R2462
R2467 R2479 R2494 R2493 R2461
R2468 R2478
R2483 R2477
TC74VHCT08AFT
R2484
C2472 C2480 R2496
R2429 C2461 R2430
15
15
16
16
L
F
K
E
B
H
D
C
A
M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
VIDEO (A SIDE)
B B
BKT4702
JACK5001OUT_Y JACK5003 DVD-Y JACK5002SAT-Y JACK5004 JACK5005
OUT_Cr OUT_Cb DVD-Cr DVD-Cb SAT-Cr SAT-Cb JACK5006
C-OUT C-DVD C-SAT ZONE2_L ZONE2_R PRE_SW1
BAR CODE
C5025 C5024 C5023 C5021 C5018 C5017
C FRONT CNT (A SIDE) J5038
J5039
C4202 C4203 C4205
C
J5045
J5033
IN ICT OP ADJ FI
CP4605
17P
J5034
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
AGND
J5005
J5002
AGND
J5003
SBR
SW
SBL
SR
FR
SL
FL
C
J5035
J5013
J5004
C5000 C4221 C4222 C4206
BKT5002
J5044
J5007
D J5022
D
J5021
C5011
J5043
C4220
J5020
J5042
BURRING J5015
J5037
J5018
J5025
C5022
J5009
J5016
J5027
J5041 ZD4200
CN4003
J5026
Pb D4211
17P
HDAM_GND J5030 J5017
E E
VIDEO B'D
J5019
J5023
AMP_MUTE
J5053
7P
HDAM_GND J5029 A_-7V J5040 D4210
A_-7V
J5012
A_-7V A_-7V
7028-07294-101-0
H/P_GND MUTE_+7V
J5010
H/P_L PREMUTE_F
PREMUTE_S
19P
H/P_GND
H/P_R PREMUTE_SB
MUTE_+7V
J5024
J5051
CP5004
RLY_F AMP_MUTE
J5028
RLY_C/S AGND C5003 C5002
FL J5046
FLY_SB AGND CN5003
RLY_H/P
V-5V SL
V-5V AGND J5048
21P
VAGND C AGND
VAGND AGND AGND
SR AGND
V+5V AGND AGND
V+5V
FRONT CNT B'D
ZONE2_L
7028-07924-201-0
FR
AGND AGND
R4301
R4297
R4298
F SBL
V-5V
ZONE2_R
MUTE_Z2
F
AGND
SBR V-5V MUTE3.3V
AGND VAGND PRE_MUTE
C4251
C4250
C4248
C4249
PRE_SW1
13P
SW VAGND
AGND V+5V J5047 AGND
PREMUTE_F V+5V VOL_MUTE
PREMUTE_S COMPONENT SW1 J5011 AGND
PREMUTE_SB V_INC AGND
V_INB AGND
AGND
C4247
CP3403
NC
COMPONENT SW2
COMPONENT SW2
COMPONENT SW1
NC
Pb
J5036
PREMUTE_SB
D/MGND J5032
PREMUTE_S
PREMUTE_F
AMP_MUTE
J5052
MUTE_+7V
CP5001
J5014
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGMD
D/MGMD
D/MGMD
V-7V
V-7V
D4212
VDICR
VDICB
VDIPY
V.AUX
V_INC
CVBS
V_INB
V+5V
V+5V
V-5V
V-5V
G G
NC
NC
NC
H/P_L CN5000 CN5001 CN5004
H/P_GND
H/P_R
13P
RLY_F
C5051
RLY_C/S
FLY_SB
RLY_H/P
COMPONENT SW1
13P 13P 7P
V_INC
D/MGND V_INB
VDICR COMPONENT SW2
D/MGND D/MGND
VDICB D/MGND
D/MGND
C5050 C5052 VDIPY
D/MGND
RS232C (A SIDE)
CP3404
F5003A F5004A CVBS
CN4002
CLAMP 300
C5047 C5048
T1.6AL/250V F5004
T1.6AL/250V F5003
D/MGND
NC
H D/MGND H
7028-07294-302-0
V.AUX
-8V_IN D/MGND
-8V_IN
CN4702
RET_GND
CP5000
RS232 B'D
C5046 C5049
13P
RSCNT (A SIDE)
RET_GND
R5067
R5068
F5000A F5001A F5002A
15P
RET_GND
T1.6AL/250V F5001
T1.25AL/250V F5000
T1.6AL/250V F5002
+8V_IN
+8V_IN
-5V_IN
C4702
7P
-5V_IN
VGND
Pb
J5031
VGND
+5V_IN
+5V_IN REMOTE3.3V
7028-07294-402-0
R5064
R5066
R5065
TRG 15V 232OMI
TRG 15V 232IMO
TRG1
INPUT 7P
F5003B F5004B D/MGND CP4700
C4707 TRG_GND
D/MGND
J TRG_+15V
J
13P
VDICR
REMUTE3.3V
AUDIO_GND
D/MGND J5050
VIDEO_GND
D/MGND
232IMO
232OMI
NC
AUDIO_AC
JACK4700
NC
NC
AUDIO_AC
VDICB
VIDEO_AC
VIDEO_AC
JACK4702
REMUTE3.3V
BKT5003
D/MGND
TRG_AC
VDIPY C4703
D/MGND
D/MGND
232IMO
232OMI
RS232C
F5001B CVBS
F5000B F5002B D/MGND
ZD4700
CP3401
NC
NC
NC
NC
CP5003 D/MGND
J5049 V.AUX
D/MGND
7P
BURRING CP4702
TRANS 8P TAP
Pb
K
RS_CNT B'D K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
117
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
VIDEO (B SIDE)
C5005
B B
R5011
R5004
R5014
C4208 R5027 R5028 C5010
C4207 C5009
D4201 D4200 C5008 R5029
R5035 R5034 R5033 R5039 R5038 R5037
D4202
R4201
R4200
R4204
R5069 R5070 R5071
C4201
C5007
C4204 C4200
R4215 R4203 R4202
R5013
C5012
R5018
R5016
Q4214 Q4201 Q4200 R5036
FRONT CNT (B SIDE)
C5001
R5022
IC5001
R5020
C R4214 C
C5015
R5021
R4213 R4212
R5019
R5017
C5004
R4236 R4226
IC5000
R4235 R4224
R4234 R4223
R5015
C5014
Q4212 Q4203 Q4202
AGND
R4227
R4225
R4222
R5002 C5019
C5006
AGND C5013 C5020
AGND R5007
AGND R5025
R5010
R5009
R5008
ZONE2_L R5005R5000
R5006R5001 R5023
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
R5003
AGND
AGND
AGND
ZONE2_R IC5003 R5024
SW
SBR
SBL
SR
FR
SL
FL
C
R4237
MUTE_Z2 R5026
MUTE3.3V C5016
R4228
R4238
R4240
PRE_MUTE
PRE_SW1 R4243 R4242
AGND
VOL_MUTE
AGND R5072
AGND
AGND
D AGND R4295 R4241 D
Q4206
Q4205
Q4204
Q4207
Q4208 R4258
R4291
E R4300
AMP_MUTE
A_-7V
E
Q4213 A_-7V
MUTE_+7V
Q4215
PREMUTE_F
PREMUTE_S
PREMUTE_SB
AMP_MUTE
AGND
FL
JP212
AGND
R4296 SL
Q4216 Q4209 Q4210 Q4211 AGND
C
AGND HDAM_GND
R4304
R4299
SR HDAM_GND
AGND A_-7V
FR A_-7V
R4302
H/P_GND
R4303
R4305
AGND
F V-5V
SBL H/P_L
H/P_GND
F
AGND
V-5V SBR H/P_R
COMPONENT SW1
COMPONENT SW2
VAGND AGND MUTE_+7V
VAGND SW RLY_F
V+5V AGND RLY_C/S
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
V+5V PREMUTE_F FLY_SB
VDICR
VDICB
VDIPY
V.AUX
COMPONENT SW1
CVBS
PREMUTE_S RLY_H/P
D/MGMD
D/MGMD
D/MGMD
V_INC PREMUTE_SB
PREMUTE_SB
NC
V-5V
V_INC
V_INB
V_INB
PREMUTE_S
PREMUTE_F
V+5V
V+5V
V-5V
AMP_MUTE
V-5V
V-5V
NC
MUTE_+7V
VAGND
NC
NC
COMPONENT SW2 VAGND
NC V+5V
D/MGND V+5V
V-7V
V-7V
G G
H/P_L
H/P_GND
H/P_R
RLY_F
RLY_C/S
FLY_SB
RLY_H/P
COMPONENT SW1
V_INC D/MGND
V_INB VDICR
COMPONENT SW2 D/MGND
D/MGND VDICB
D/MGND D/MGND
VDIPY
D/MGND
CVBS
D/MGND
NC
H D/MGND H
V.AUX
RS232C (B SIDE) D/MGND -8V_IN
-8V_IN
RET_GND
RSCNT (B SIDE) REMOTE3.3VR4710
RET_GND
RET_GND
+8V_IN
R4714
C4717
232OMI +8V_IN
232IMO C4716 C4711
TRG1 -5V_IN
D/MGND -5V_IN
C4715
C4706
TRG_GND VGND
TRG_+15V VGND
+5V_IN
IC4701
+5V_IN
INPUT
TRG 15V
TRG 15V
FRONT
AUDIO_AC
BACK
AUDIO_GND
J J
VIDEO_GND
D/MGND
REMUTE3.3V
VIDEO_AC
VDICR
REMUTE3.3VNC
D/MGND
NC
232IMO
TRG_AC
AUDIO_AC
NC
C4712 D/MGND
VIDEO_AC
232OMI
VDICB
R4709
C4719
R4711
C4718
D/MGND
D/MGND
D4702 D4701 VDIPY
232OMI
232IMO
R4708
D4703 IC4700 D/MGND
C4704 CVBS
NC
NC
NC
C4705 D/MGND
NC
D/MGND
RS232C V.AUX
D/MGND
INPUT-RS232C CNT
K K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
118
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A
AVR_E400_X2000_FRONT 1/1 A
FL4400
018BT021GINK
USB B'D
CP4406 BD4411 BD221T
AUTO HDMI DIGITAL ANALOG S.BACK dts AUDYSSEY
TUNEDSTEREORDS SLEEP USB A2
dB
USB HOST
MUTE VBUS BD4409 R4487 VBUS
4 3 2 1
5 4 3 2 1
0 0
B PCM Z2 -DATA -DATA B
CDS3C15GTA
D4411 CDS3C05HDMI1
D4412 CDS3C05HDMI1
C4471 220/6.3(8*5)
DIG.ANA.
+DATA
R4488
+DATA
TO HDMI
C4470 100N-K
GND 4 3 0
OPEN
C4469 OPEN
OPEN
OPEN
GND
1N-J
R4486 2K2
L4401
RESET
GND
PGND
1 2
LGND
Q18G
Q17G
OSC
VDD
TSB
TSA
17G
18G
DA
CP
CS
VH
CN4402
F1
F2
C4472
C4473
C4474
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
D4413
BD4410
0
TO N2801
FROM TRANS R4407
OPEN
CB4400
0
C4429 100N-K
C4430 100N-K
CP4400 G4402
10
C4479 R4403 R4408
C FIL2 100N-K 100
1
C4416 Q4402 Q4403 C
4 3 2 1
R4438
C4410 100N(EB)-100V R4415 2SC3052 R4422 2SC3052
FIL1 100 100
OPEN
VkkGND C4408 R4404 C4415
Vkk
100N-K 100 R4405
1 100N(EB)-100V MIC B'D
CB4401 C4432
0 R4416 R4423
68K
91K
100K 100N(EB)-100V
10
R4420 100K R4425
R4406 39K 39K R4467 R4470 JP4492 JACK4400
OPEN MIC
C4431 100 OPEN 0
R4436
R4437
R4439
100N(EB)-100V MICDET MICDET MICDET.
JP4493
R4448 BD4403 0
0 MIC.
100K
JP4490
D C4409 ZD4400 0 D
10/50 ZJ6.8B F4400 R4426 F4401 A-7V A-7V
Q4404 JP4491
OPEN 4R7(1) 6125FF500-R KTC1027Y 0
VH
D4401 D4402
BD4407
1N4007 1N4007 R4428 R4429
C4419 4K7
0
100N(R)-250V 4K7 C4426
C4421 1000N-Z C4449 R4465
R4402 470/63(12.5*20) ZD4401 C4423 OPEN OPEN 8 5
0 ZJ22B 100/50 C4447
C4420 C4422 MIC 7 1/50
100P-J
100N(R)-250V 6 R4452 4 3 R4455 100 C4462
1/50 ZD4402 IC4400:B 100 100N(EB)-100V
ZD4403
100N-K
100P-J
ZJ15B NJM8080 1
R4482
100K
ZJ5.1B 2
OPEN C4463
E FROM HDMI R4468 IC4400:A E
C4453
C4434 C4435 R4454 R4456 47N(EB)-100V
OPEN NJM8080 820 3K3 R4473 R4466
1/50 OPEN C4436 R4450 100K 2K2
CN4400 47N-K 47K
C4443
C4444
R4469
M3.3V R4453 18K D4408
1
R4475 R4480 LBAS16HT1G
D/MGND ZD4404 OPEN OPEN C4437 82P-J C4438
2
100P-J
100P-J
100P-J
ZJ5.1B 100/10
SWM3.3V SWM3.3V
3
MICGND MICGND
A+7V A+7V
4
D4410
C4440
A-7V A-7V LBAS16HT1G
47N-K
5
C4425
C4427
C4428
R4410 C4413 C4433 C4439 ZD4405
NC
6
10K 47N-K 1/50 10/50 ZJ5.1B
NC
7
R4451
NC 1K
8
A+7V A+7V
MICGND MICGND
9
R4411
100 MODEL AVR N400 AVR X2000 D/MGND
10
MIC MIC R4442 100
F R4491
AREA E3 E3 E2/E1C/K F
VGND OPEN R4443 100
11
G4401
OPTION A X O X
12
NC Q4400 C4414 R4444 100
FLRST RT1N441C 10N-K OPTION B X O O BD4401 H/P B'D
13
H/PGND H/PGND 0 C4459 10N(EB)-100V
14
H/PL H/PL D/MGND D4403
BD4402 LBAS16HT1G
C4448
15
H/PR H/PR H/PDET
H/PDET 0 100N-K D4405 LBAS16HT1G
16
FRONT_IRIN FIRIN H/PL R4478 C4460 G4400
H/PL 100 10N(EB)-100V
17
B/PIRIN/SWM5V(MX) B/PIRIN C4411 H/PGND D4404
H/PGND JP4401 LBAS16HT1G
18
POWERKEY POWERKEY H/PR 0 D4406
100N-K H/PR LBAS16HT1G
19
REDLED REDLED
OPEN
C4412 C4455
20
FLCLK FLCLK R4476
OPEN 1N-K
21
FLDATA FLDATA 10/50
G G
22
FLCE1 FLCE
TO N3408
R4449
JP4402 R4477 C4456
23
NC OPEN
0 1N-K
24
FLRST FLRST
25
GRNLED GRNLED KEY3
JACK4401
26
NC KEY2 FLCE
27
NC KEY1 FLCLK
28
NC
FLDATA
29
MICDET MICDET
ENCODER B'D
30
H/PDET H/PDET
31
NC
MASTER VOL. ENCODER
R4457 100
KEY1
32
KEY1 R4413 R4417 R4424 R4427 R4430 R4434 R4447
100 150 100 150 180 100 150 R4459 100 R4471 4K7
H H
C4477
ZD4407 ZD4406
KEY2
33
OPEN
KEY2
10N-K
D/MGND
C4441
470P-J
EC16B24SO
34
KEY3 KEY3 SWM3.3V
SW4410
SW4409
SW4400
SW4401
SW4402
SW4403
SW4404
SW4405
SW4406
SW4407
SW4408
35
ISELA ISELA VSELB
VSELB
36
ISELB ISELB VSELA
-ZZZ
OPEN
VSELA
C4478
C4442
470P-J
10N-K
37
VSELA VSELA
VSELB
38
VSELB
39
D/MGND
R4458 100 R4461 100 R4472 4K7
40
NC
A1
HDMI DIGITAL CNT M7 OPTION_B
J AVR-E400 ON/OFF ZONE2 SOURCE SOURCE FUNCTION CNT B'D FUNCTION ENCODER B'D J
1 CBL/SAT SOURCE 4 NETWORK 2 Blu-ray STATUS 3 GAME DIMMER
ZONE2 SELECT SELECT
FUNCTION
ON/OFF ZONE2 TUNER TUNER ENCODER
AVR-X2000 1 CBL/SAT 4 NETWORK 2 Blu-ray STATUS PRESET CH+ 3 GAME DIMMER PRESET CH- R4464 R4479
ZONE2 SOURCE
4K7 EC16B24SO 4K7
SW4412 -ZZZ
BKT4400 CP4401 CP4402CP4403 CP4405
C4475 10N-K C4476 10N-K
R4490
D/MGND D/MGND
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
R4489
100
C4445 C4450
SWM3.3V SWM3.3V 100 470P-J 470P-J
R4418 390
B/PIRIN ISELB ISELB ISELB
SIR-341ST3F
C4446 OPEN C4451 OPEN
R4419
ISELA ISELA ISELA
RMC4400 390 Q4406 ZD4408 OPEN ZD4409 OPEN
K R34FS9A R4414 ISA1530AC1 POWERKEY POWERKEY POWERKEY K
10
OPEN
STBY LED(R) STBY LED(R)
OPEN
47K
Q4401 R4431
OPEN STBY LED(G) STBY LED(G)
RT1P441C R4440 Q4408 R4460 2K2 RED
R4409 1K OPTION_A ISA1530AC1
FIRIN OPEN R4462 GREEN
R4432 R4433 560
D4400
LED4400
OPEN 10K
R4421
LED4401
R4441 R4445 R4463 560 LED4402
R4435 OPEN 10K R4446
47N-K
47/16
4K7 4K7 SW4411 ON/STBY
C4424
R4412 47N-K
47K Q4405 Q4407
C4417
C4418
RT1N141C RT1N141C
GRNLED
REDLED
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M M
SCHEMATIC DIAGRAMS (1/24)
FRONT UNIT (1/1)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
119
J
L
F
K
E
B
H
D
C
A
M
CD
GND LINE
BD
CN4701
DVD
1
1
JK4200
1
SAT/CBL
AUDIO IN
JK4201
4P JACK
AUDIO IN
TRG+15V
4P JACK
2
L
L
L
L
R
R
R
R
TRG GND
3
NC
4
AGND
MX_R 5 MX_R
6 AGND
7
MX_L MX_L
8
A_-7V
9
D4206
OPEN
OPEN
D4207
D4205
D4203
D4208
D4202
D4209
D4204
A_-7V
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
10
PREOUT 2/2 B6
A_+7V
11
A_+7V
2
2
R4211
470
470
470
470
470
470
470
POWER+ LINE
470
1
R4210
R4207
R4550
R4205
R4208
R4206
R4209
OPTION A
RC_IN
2
FRONT_IRIN
3
C4211 C4210 C4550 C4204 C4552 C4551 C4209 C4553
330P-J 330P-J 330P-J 330P-J 330P-J 330P-J 330P-J 330P-J BT_LINK
4
RC_OUT
5
KILLIR
6
R4221 R4220 R4552 R4551 R4217 R4216 R4219 R4218
R4237
R4236
820K 820K 820K 820K 820K 820K 820K 820K M3.3V
7
C4218
M/DGND
8
C4212
C4216
OPEN
C4214
OPEN
OPEN
OPEN
OPEN
C4217
C4215
C4213
C4219
OPEN
OPEN
OPEN
TRG1
9
100K
100K
232IMO
3
3
10
232OMI
11
R4233 R4232 R4227 R4226 R4229 R4228 R4231 R4230
REMOTE3.3V
12
OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN
A_-7V
A_+7V
SWM5V(MX)
13
POWER- LINE
TRG_15V
TRG_GND
D5V(MX)
BD_L
BD_R
CD_L
CD_R
DVD_R
SAT_L
AGND
DVD_L
SAT_R
PREOUT 2/2 B4 : 13P
CN4700
BT_LINK
RC_IN
FRONT_IRIN
RC_OUT
D5V(MX)
232IMO
232OMI
SWM5V(MX)
TRG1
M3.3V
KILLIR
REMOTE3.3V
M/DGND
B1
VIDEO_F/CNT 3/3 D5 :7P
AVR_X2000 : 7P
TO 4700
OTHER AVR : 13P
4
4
CP4200
1
OPTION D
DA_+5V DA_+5V
2
DA_+5V
3
A_-7V
4
A_-7V A_-7V
5
A/D_L
A/D_R
BD_L
MX_L
470K
BD_R
ANALOG AUDIO
MX_R
SAT_L
USB_L
R4244
DVD_L
SAT_R
EXT_C
USB_R
DVD_R
MIC_IN
A_+7V
VAUX_L
EXT_FR
6
VAUX_R
A_+7V A_+7V
7
M/DGND M/DGND
8
TO 3407
M3.3V M3.3V
9
470K
R4245 MVOL_CLK
10
MVOL_DATA
11
R4251
R4257
R4252
R4250
R4248
R4249
5
5
TRG1 TRG1
12
232IMO 232IMO
13
232OMI 232OMI
14
100
100
A_-7V REMOTE3.3V
470K
470K
470K
470K
REMOTE3.3V
15
MUTE3.3V MUTE3.3V
16
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 RC_IN RC_IN
17
NC
NC
NC
NC
NC
NC
NC
NC
NC
FRONT_IRIN FRONT_IRIN
BD_L
18
MX_L
BD_R
AVEE
MX_R
MUTE
AGND
SAT_L
EXT_L
A/D_L
USB_L
DVD_L
SAT_R
EXT_R
CD_R 81 50 MVOL_CLK
A/D_R
USB_R
DVD_R
MIC_IN
MIC_IN
DIGITAL1 AUDIO
BT_LINK
VAUX_L
BT_LINK
VAUX_R
19
CD_L 82 DATA 49 MVOL_DATA RC_OUT RC_OUT
HDMI_DIGITAL CNT M4
20
83 DGND 48 KILLIR KILLIR
50:CLK
21
84 NC DCR OUT 47 Z2R
A9
D5V(MX) D5V(MX)
81 : CD_R
22
TUNERR. 85 TUNER_R DCL OUT 46 Z2L SWM5V(MX)
82 : CD_L SWM5V(MX)
23
6
6
TUNERL. 86 TUNER_L 83 : NC DCL IN 45 ZONE2_L VOL_LATCH VOL_LATCH
24
87 NC DCR IN 44 ZONE2_R VOL_CLK VOL_CLK
25
88 NC EXT_FR 43 EXT_FR VOL_DATA VOL_DATA
89 NC EXT_FL 42 EXT_FL
90 NC EXT_SR 41 EXT_SR
NC
IC4200
91 EXT_SL 40 EXT_SL
R2A15218FP
92 NC EXT_SW 39 EXT_SW
OPTION F
R4259
D/A_FL 100K
TMDS SIGNAL
DA_FL. 93 EXT_C 38 EXT_C USB_L USB_L
2
C4225 10/50
DA_FR. 94 D/A_FR EXT_SBR 37 EXT_SBR AGND DAGND
3
99 : D/A_SBL R4260
DA_C. 95 D/A_C 100 : D/A_SBR EXT_SBL 36 EXT_SBL 100K USB_R USB_R
4
33 : BASSR2 C4226 10/50
DA_SW. 96 D/A_SW 32 : BASSR1 NC 35 AGND DAGND
5
DA_SL. 97 D/A_SL 31 : NC TRER 34 A/D_L A/D_L
6
7
7
DA_SR. 98 D/A_SR 33 AGND DAGND
7
DA_SBL. 99 32 A/D_R A/D_R
8
BASSL1
DA_SBR. 100 31 AGND
BASSL2
SBLC
DAGND
SBRC
SLC
NC
NC
SBLOUT
NC
NC
FLC
SRC
SBROUT
CC
FRC
SLOUT
FLOUT
SROUT
COUT
FROUT
TREL
AGND
AGND
AGND
AGND
AGND
AGND
SWC
AVCC
9
SWOUT
R4263
10K DA_FL. DA_FL
C4237 47/63
10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 AGND DAGND
11
R4264
10K DA_FR. DA_FR
12
C4238 47/63
R4371
C4231
TO N3403
R4375
R4373
R4372
R4376
C4235
R4370
C4233
R4374
C4232
C4236
R4326
C4229
C4230
C4234
AGND DAGND
13
R4265
10/50
C4296
10K DA_C. DA_C
C4245 220/16 C4239 47/63
14
AGND DAGND
15
VIDEO SIGNAL
Z2R R4266
100
100
100
100
100
100
100
100
10K DA_SW.
47/16
47/16
47/16
47/16
47/16
C4246 220/16 DA_SW
16
C4240 47/16
220/16
220/16
100/25
Z2L AGND DAGND
17
R4267
10K DA_SL. DA_SL
18
C4241 47/16
470K
470K
8
8
R4553
R4332
AGND
10/50
DAGND
C4269
19
R4268
0
10K DA_SR.
0
DA_SR
A_-7V
A_+7V
C4242 47/16
20
R4360
R4354
AMP_C
AGND DAGND
AMP_FL
AMP_SL
21
AMP_FR
AMP_SR
R4269
PRE_SW
AMP_SBL
AMP_SBR
10K DA_SBL. DA_SBL
C4243 47/16
22
120
AGND
HDMI_DIGITAL CNT G3
R4270
DAGND
23
10K DA_SBR. DA_SBR
C4244 47/16
24
RET_GND RETGND
25
RET_GND RETGND
R4261
26
10/50
10/50
100K
C4287
C4283
VAUX_L C4227 10/50 VAUX_L
27
AGND AGND
R4262
28
100K VAUX_R VAUX_R
C4228 10/50
29
A8
AGND MICGND
9
9
30
INA1 INB1 MIC_IN MIC_IN
31
INA2 INB2 VOL_MUTE VOL_MUTE
R4367
COMPONENT(Y) SIGNAL
R4363
INA3 INB3
CP4201
INA4 INB4
OPTION G
GND GND
OPTION E
AREA
C4293 33/16 DCCAP_B C4281 33/16
MODEL
OPTION E
OPEN
OPTION A
DCCAP_A
OPTION F
OPTION E
OPTION B
OPTION A
OPTION D
OPTION C
OPTION G
OPEN
GND GND
CP4202
OUTA OUTB
1
C4294 10/50
VDDOUT ADR1
EXT_SBL EXT_SBL
X
X
X
O
* MODEL/AREA OPTION
2
E3
VOL_DATA DATA ADR0 R4271 100K
OPTION A
AGND
3
VOL_CLK CLOCK VCC
EXT_SBR EXT_SBR
4
VOL_LATCH LATCH VDD R4272 100K
AGND
10
10
O
O
O
GND GND
EXT_SL EXT_SL
0-1608 OPEN
6
R4288
R4289
R4290
TREA TREB R4273 100K
AGND
7
BASSA1 BASSB1
EXT_SR
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
EXT_SR
47UF/16V(SMS)
8
47UF/63V(SMS)
BASSA2 BASSB2 R4274 100K
0
0
0
X
X
O
O
AVRN400 AVRX2000
AGND
9
R4359
OPEN
C4288
C4295
C4282
R4364
C4284
C4280
C4290
EXT_C EXT_C
10
R4275 100K
RET_GND AGND
11
IC4206
EXT_SW EXT_SW
NJW1194A
100
12
100
A_+7V
R4276 100K
A_-7V
R4293
R4292
PREOUT 2/2 K3
R4294
AGND
13
4K7
4K7
100N-K
100N-K
4.7/50
4.7/50
R4341
R4347
X
O
O
O
EXT_FL
3N3-K
3N3-K
EXT_FL
14
R4277 100K
OPEN
0
0
0
AGND
15
E3 E2/E1C/JP U1/N1/K1
EXT_FR
OTHER AVR
EXT_FR
R4287 100K
10UF/50V(SMS)
47UF/50V(SMS)
R4348 100K R4344 100K
11
11
10/50
10/50
C4275
C4304
R4349 100K R4336 100K
OPTION B
1
A_+7V
2
A_-7V
A7
A_-7V
3
A_-7V
4
RET_GND
5
A_-7V RET_GND
6
RET_GND
A_+7V
7
A_+7V
8
A_+7V
12
12
DA_+5V
9
DA_+5V
MAIN 2/2 M6
10
NC
TO CP4006
C4554
TRG_GND
11
TRG GND
TRG_15V
ZONE2_L
TRG_15V
ZONE2_R
0
OPTION C
CN4006
1
TU_GPIO2/TUNED.
TO CP4007
TU_GPIO2/TUNED
2
TU_RST/ST.
AGND
TU_RST/ST
3
TU_SEN TU_SEN
4
TU_SDIO/SDA.
13
13
TU_SDIO/SDA
5
TU_SCLK/SCL. TU_SCLK/SCL
6
AMP_C
AMP_FL
AMP_SL
AMP_FR
TU_GND
AMP_SR
PRE_SW
7
AMP_SBL
AMP_SBR
TUNERR. TUNERR
8
MAIN 2/2 M9
TU_GND
9
TUNERL.
A6
TUNERL
CN4703
7
PRE_MUTE PRE_MUTE
6
MUTE_Z2 MUTE_Z2
5
ZONE2_L
MUTE_Z2
ZONE2_R
14
14
MUTE3.3V
TU_GPIO2/TUNED.
VOL_MUTE
TU_GPIO2/TUNED
PRE_MUTE
4
TU_RST/ST. TU_RST/ST
3
TU_SEN TU_SEN
2
TU_SDIO/SDA. TU_SDIO/SDA
1
OPTION B
TU_SCLK/SCL. TU_SCLK/SCL
13 12 11 10 9 8 7 6 5 4 3 2 1
CN401
C
FL
SL
FR
SR
HDMI_DIGITAL CNT M4
SBL
CP4203
SBR
AGND
AGND
AGND
AGND
AGND
AGND
7CH_AMP 1/2 A4
A5
INPUT UNIT (1/1)
A4
TO CP401
15
15
TO N3406
16 14 12 10 8 6 4 2
CP4204
17 15 13 11 9 7 5 3 1 14 12 10 8 6 4 2
OPTION A
CN4205
15 13 11 9 7 5 3 1
C
A3
FL
SL
FR
SR
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBL
SBR
AGND
AGND
AGND
AGND
AGND
AGND
AGND
ZONE2_L
PRE_SW1
MUTE_Z2
ZONE2_R
VOL_MUTE
PRE_MUTE
PRE_SW
MUTE_3.3V
INPUT 1/1
VIDEO_F/CNT 1/3 O8
PREOUT 2/2 L5
SCHEMATIC DIAGRAMS (2/24)
TO CN5003
16
16
L
F
K
E
B
H
D
C
A
M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A SMPS B'D A
B
BKT4140
E3 OPTION B
M3 OPTION
L4141 C4148 OPEN
OPEN OPTION
L4140 OPTION
F4140 SQ2014 27mH JP4140 JUMPER D4142 1N4007
JK4140
2
OPEN
live ZD4151
AC INLET
100/200(18*31.5)
4 3 4 3 D4143 1N4007 ZD4147
R4148
Neutral ZJ22B
｡ﾜ ｡ﾜ
2M2
C4143 ZJ39B
C4151
1
0.1/275V ZD4152
｡ﾜ ｡ﾜ D4144 1N4007
ZD4148 ZJ22B
R4140
1 2 1 2
ZJ39B
D4145 1N4007 ZD4153 D4149
JP4141 JUMPER ZJ22B S30SC6MT
OPTION
1N4007
1N4007
C ZD4149 C
R4149
C4149 OPEN C4153
2M2
ZJ39B 3
ZD4154 1N 1
470P/250V
470P/250V
BKT4141 2
C4140
C4141
ZJ22B
M3 OPTION
CHASSIS GND
D4140
D4141
ZD4155
ZJ22B
R4150
1M
ZD4156
ZJ22B
R4141 ZD4157
1M ZJ22B
2
T4140
5600/6.3(NXA)
5600/6.3(NXA)
5600/6.3(NXA)
R4157
R4142 R4154 EER-2834 56
1
22K-F
12
OPEN
OPEN
1M
4700N-K
D 10 D
OPTION CP4140
100N-K
11 IC4142
R4164 D4147 ｡ﾜ 10 PC123X2YFZ
1N4007
1M OPTION 3 ｡ﾜ ｡ﾜ 9
AC CORD OPTION D4146 ZD4150 C4155 R4158
R4160
R4162
R4163
ZJ5.6B
10/50(NXA) 3K3
C4164
C4162
C4159
C4165
6
C4161
AVRE400 AVRX2000 OTHER AVR ｡ﾜ 8
1N4007 ZJ22B D4148
7
E3 E1C/K E3/E2 U/N/K R4147 1N4007 R4159 C4166
270K 5 5K6 100N-K
JK4140 OPEN O ZD4158
ZJ39B
ZD4159
CP4140 JE202B1T2 OPEN
D4151 OPEN
B2
E
TR4140
KMB2D0N60SA
C4156 2200P/250V C4160 100N-K IC4143
KIA2431AP
C4167
OPEN D5.2V TO N3601 E
2 3 4 5
OPTION R4161 D5.2V
C4142 1
5
D
3
C
2
X
1
V
BKT4142 6K8-D
DGND HDMI DIGITAL CNT H9
0.01/250V
ZD4160 R4151 R4153 M3 R4165
MTZJ6.2B 3 IC4140 15K 6R8 C4154 OPEN DGND
TOP258MG MAINPOWER
100N-K RLY4140
1
2
S S S S S JZC-36FD
100N-K
100N-K
100N-K
100N-K
330K
6 7 8 9 10 CN4141
R4145 D4150 5P_WIRE(2.5mm)
1M R4152 C4152 1SS133
1K 47/25(NXA)
F4141
C4146
R4143
C4145
C4150
C4147
C4157
OPEN
F TR4142 R4156 4K7 F
2 1
TO POWER TRANS KTC3198G
CP4142 R4155
LWBP1143-02P 10K
C4158
OPEN
G FUSE OPTION OPTION TABLE G
E3 JP E1C, E2 ZD4160 ZD4147 ZD4148 ZD4149 R4148 R4149 R4150 R4147 C4148 C4149 L4140 C4151
F4140 F4141 F4140 F4141 F4140 F4141 E3, U MTZJ6.2B MTZJ39B MTZJ39B MTZJ39B 2M2 (5) 2M2 (5) 1M (5) 270K OPEN OPEN SQ2014 27mH 100/200
AVR_X2000 2A 6.3A 2A 6.3A 1.6A 3.15A E2,E1C, N,K MTZJ16B OPEN OPEN OPEN OPEN OPEN OPEN 56K 0.01 0.01 SQ2014 50mH 100/400
AVR_E400 2A 6.3A X X X X JPN MTZJ5.6B MTZJ39B MTZJ39B MTZJ39B 2M2 (5) 2M2 (5) 1M (5) 270K OPEN OPEN SQ2014 27mH 100/200
H FUSE OPTION H
U1B N1SG, N1B, K1B
F4140 F4141 F4140 F4141
OTHER AVR 2A 6.3A 1.6A 3.15A
! INDICATES SAFETY CRITICAL COMPONENTS.
TO REDUCE THE RISK OF ELECTIC SHOCK, LEAKAGE
CURRENT OR RESISTANCE MEASUREMENTS SHALL BE
J
CARRIED OUT ( EXPOSED PARTS ARE ACCEPTABLY J
INSULATED FROM THE SUPPLY CIRCUIT ) BEFORE
THE APPLIANCE RETURNED TO THE CUSTOMER.
K K
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
L L
M SCHEMATIC DIAGRAMS (3/24) M
SMPS UNIT (1/1)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
121
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
VIDEO_F/CNT 1/3
A
INH
INPUT
CVBS INPUT SW
(MM74HC4051MX)
A B C
OUT PUT AVR N400/X2000/OTHER AVR
VIDEO / ZONE2 PART A
L L L L Y0 MUTE
L L H L Y2 DVD Y/V.
L L L H Y4 CBL/SAT
L L H H Y6 V.AUX R5000 820-D
IC5000:A R5001 5K6
BD7628 2
CVBS OUT 1 6 R5002 OPTION B
OPEN
75
B OPTION B 4 3
R5003 C5000
100 100/10 7 Y/V. B
5 8 IC5000:B
BD7628
V+5V
VIDEO_F/CNT 2/3 I5
R5004
C5001 C5002 * MODEL / AREA OPTION
10N-K 22/50 R5005 R5006 C5003 C5004 CN5001
10K 680-D 22/50 10N-K MODEL AVR-E400 AVR-X2000 OTHER AVR
AREA E3 E3/E2/E1C/JP U1B/N1B/K1B D/MGND
C5005 OPEN
1
R5007 OPTION A O O X NC
2
75 OPTION B X X O COMPONENT SW2
3
OPTION C X O O NC
TO CP5001
V-5V V INB
5
CHASSIS
V+5V V INC
6
C COMPONENT_SW1 C
7
V+5V
8
CVBS
V+5V V+5V
9
VAGND
10
C5006 10N-K
JACK5006 VAGND
11
DVD DVD
V-5V V-5V
12
VCC Y4
V-5V
9 10 11 12 13 14 15 16
8 7 6 5 4 3 2 1
13
CVBS IN R5014
75
Y2 Y6
B5
MM74HC4051MX
Y1 OUT
Y0 Y7
IC5001
CBL/SAT CBL/SAT Y3 Y5
CVBS.
V+5V
V-5V
R5013
A INH
75
10K R5008
D R5011 10K
B VEE C5007
10N-K
D
R5009
75 C GND
10K R5010
CVBS_C CVBS_C VIDEO_F/CNT 2/3 G5
CVBS_B CVBS_B
CN5000
D/MGND
1
V.AUX V.AUX VAUX
2
OPTION B
TO CP500
D/MGND
3
NC
4
D/MGND
E E
5
CVBS. CVBS
6
COMPONENT OUT D/MGND
7
R5015 150 R5016 150
JACK5001 Y Y_OUT. VDIPY
8
R5017 160 R5018 160
D/MGND
9
R5019 150 R5020 150
Cb CB_OUT. VDICB
10
R5021 160 R5022 160
D/MGND
11
R5023 150 R5024 150
Cr CR_OUT. VDICR
12
R5025 160 R5026 160
OPEN
OPEN
OPEN
COMP_SW2 D/MGND
68P
68P
68P
13
C5011
COMPONENT IN C5013
100N-K 100/10
C5012 68P
AVRE400_X2000 COMP_SW1 B4
C5009
C5008
C5010
68P
R5029
R5028
C5015
R5027
F IC5003 C5014 C5016 68P F
100N-K
OTHER AVR NJM2586AVC3 OPTION B R4301
1K
Y1_IN Y_OUT R5036
11 12 13 14 15 16 17 18 19 20
10K
10 9 8 7 6 5 4 3 2 1
OPTION A
75
75
75
SW1 PS
Q4216 R4305
Y2_IN Cb_OUT RT1P141C 470K
R5034
R5033
R5035
SW2 +V2 V+5V C4251
R5069
R5070
R5071
R4299 0.1/50
10K
10K
10K
JACK5002 Y1 C5017 1/50 Y1_IN
Y3_IN Cr_OUT
1K
VIDEO_F/CNT 2/3 L5
+V1 -V2
Cb1_IN Cr1_IN C5019
100N-K Q4211 R4304
C5018 1/50 CB1_IN CN5004
CBL/SAT Cb1 GND -V1 RT1P141C 470K
TO CP5004
Cb2_IN Cr2_IN V-5V R4298
CBL/SAT 1K
C4250
0.1/50 PREMUTE_SB
1
C5021 1/50 CR1_IN Cb3_IN Cr3_IN
G Cr1 PREMUTE_S G
2
C5022
C5020 100/10 Q4210 R4303 PREMUTE_F
3
100N-K 470K
RT1P141C MUTE_+7V
4
C4249
BKT4702 0.1/50 A_-7V
5
R4297 A_-7V
6
AMP_MUTE
JACK5003
7
1K
75
75
75
R4302
COMP_SW2 Q4209 470K
RT1P141C C4248
B3
OPTION B
R5039
R5038
R5037
0.1/50
COMPONENT INPUT SW
C5023 1/50 (NJM2586AVC3) MUTE+7V
Y2 Y2_IN
MUTE(PS) INPUT D4212
OUT PUT AVR N400/X2000/OTHER AVR 1N4007
H C5024 1/50 H OFF SW1 SW2 A_-7V CN5003 H
OPEN Cb2 CB2_IN H L IN2 CBL/SAT R4296 C4247
DVD L ON H H IN3 DVD 10K 10/50 AGND
1
Cr2 C5025 1/50 AGND
2
CR2_IN
AGND
3
AGND
4
Q4208
RT1N141C VOL_MUTE
TO CP4204
5
PRE_MUTE AGND
6
R4295 PRE_SW1
10K
7
R4291 PRE_MUTE
8
820
MUTE3.3V MUTE_3.3V
9
CHASSIS GND
Q4207 MUTE_Z2
10
J JACK5004
RT1P141C
ZONE2_R J
11
R4200 C4202 R4222 R4238 C4221 D4211 D4210 AGND
2P JACK 220 22/50 470 470 22/50
12
Z2L ZONE2_L Q4213
R4300
10K ZD4200 1N4007 1N4007 ZONE2_L
13
ZONE OUT Q4200
330P
AGND
100K
OPTION B RT1N141C ZJ3.6B
14
INC2001AC1 Q4202
D4200 R4212 OPEN AGND
15
OPEN 100K R4223 R4234 Q4215 AGND
R4242
16
10K OPEN
C4200
R4202
470K RT1P141C
AGND 3A
17
OPTION C R4240
INPUT 1/1 O6
100K
Q4201
10N
330P
INC2001AC1 Q4203 470K R4241 R4243 Q4205 BKT4703
OPEN 1K 470K Q4206
D4201 R4213 RT1N141C
OPEN 100K Q4204 RT1P141C
R4235
K R4224 C4220 RT1P141C R4258 K
C4207
C4201
OPEN
R4203
R4201 10K 0.1/50
220 10K
Z2R R4225 R4239 C4222
ZONE2_R
C4203 470 470 22/50
22/50
JACK5005
10N
100K
Q4214
330P
INC2001AC1 Q4212
OPTION A R4214
OPEN
D4202
R4237
470K
OPEN 100K R4226 R4236
C4208
L L
C4204
10K OPEN
R4215
R4204
220
SW1 R4227 R4228
PRE_SW1
C4205 470 470 C4206
22/50 22/50
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M SCHEMATIC DIAGRAMS (4/24) M
VIDEO UNIT (1/3)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
122
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A
VIDEO_F/CNT 2/3 A
B
FRONT_CNT PART B
HDMI_DIGITAL CNT C4 HDMI_DIGITAL CNT G8
TO N3404
COMPONENT SW2
TO N3401
COMPONENT SW1
H/P_GND
RLY_H/P
RLY_C/S
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
RLY_SB
H/P_R
VDICR
H/P_L
RLY_F
VDICB
VDIPY
V INC
V INB
VAUX
CVBS
B9 B8
NC
C 1 3 5 7 9 11 13 1 3 5 7 9 11 13 C
2 4 6 8 10 12 2 4 6 8 10 12
CP3401 CP3404
FUSE F5001,F5002,F5003,F5004 F5000
AVR E400_X2000 OPEN
D T1.6A/250V D
OTHER AVR T1.25A/250V
4B 2 4 6 8 10 12 5B 2 4 6 8 10 12 2 4 6 3B
1 3 5 7 9 11 13 1 3 5 7 9 11 13 1 3 5 7 CP5004
CP5000 CP5001
AMP_MUTE
PREMUTE_F
PREMUTE_S
PREMUTE_SB
VAGND
VAGND
TO CN5004
VDICR
VDIPY
VAUX
COMPONENT SW2
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
VDICB
D/MGND
D/MGND
D/MGND
CVBS
V INC
NC
NC
NC
MUTE_+7V
V INB
A_-7V
A_-7V
COMPONENT SW1
V+5V
V+5V
V-5V
V-5V
R5064
OPEN
F5000
OPEN
C5046 TRG_15V_A TO CN5000
OPEN
VIDEO_F/CNT 1/3 O7
E VIDEO_F/CNT 1/3 O5 VIDEO_F/CNT 1/3 O3 E
MAIN TRANS TAP F5001
CP5003
FUSE
TO CN5001
AC_IN +5V_IN_A
4 3 2 1
R5065
VGND OPEN
AC_IN
AC_IN C5047 R5072
OPEN
AC_IN
7 6 5
OPEN
RET_GND
F AC_IN F
VGND
C5049
OPEN
C5048
F5002 100N(M)-50V
FUSE
R5066
OPEN
-5V_IN_A
F5003
G FUSE G
2 4 6 8 10 12 14 16 18 20
R5067 1 3 5 7 9 11 13 15 17 19 21
OPEN CP3403
+8V_IN_A
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBL
PRE_SW
SBR
FR
SL
C
SR
AMP_MUTE
FL
PREMUTE_F
PREMUTE_S
PREMUTE_SB
C5050
OPEN
RET_GND
C5052 C5051
OPEN 100N(M)-50V
R5068
OPEN PREOUT 1/2 B8
-8V_IN_A OPTION B
H H
F5004 OTHER AVR
FUSE
VGND
RET_GND
TRG_15V_A
+8V_IN_A
-8V_IN_A
+5V_IN_A
-5V_IN_A
J J
B7 14 12 10 8 6 4 2 B6 18 16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1 19 17 15 13 11 9 7 5 3 1 16 14 12 10 8 6 4 2
CN4002 CN4003
17 15 13 11 9 7 5 3 1
VAGND
VAGND
VGND
VGND
CP4605
TRG 15V
TRG 15V
V+5V
V+5V
V-5V
V-5V
RET_GND
RET_GND
RET_GND
HDAM_GND
HDAM_GND
RLY_F
RLY_C/S
RLY_SB
H/P_GND
H/P_GND
RLY_H/P
H/P_R
H/P_L
MUTE_+7V
+8V_IN
+8V_IN
-8V_IN
-8V_IN
A_-7V
A_-7V
+5V_IN
+5V_IN
-5V_IN
-5V_IN
AGND
AGND
AGND
AGND
AGND
AGND
AGND
HDAM_GND
HDAM_GND
FR
SL
SBL
PRE_SW
C
SR
SBR
FL
MAIN 2/2 A4 MAIN 2/2 M3
K HDAM 1/1 O4 K
TO CP4002 TO CP4003 OPTION B
OTHER AVR
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M SCHEMATIC DIAGRAMS (5/24) M
VIDEO UNIT (2/3)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
123
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A
VIDEO_F/CNT 3/3 A
B B
RS232_CNT PART
C C
(AVR X2000 E3 ONLY) RS232 / TRG PART
D D
OTHER AVR
E IC4700
E
PQ120DNA
1 IN OUT 3 TRIGGER
OUT1
NC
ON/OFF GND
4
C4704
ZD4700
C4702
100N-K
C4703
2 5
10/50
10/50
ZJ16B
JACK4700
C4705
2 4 6
1B
CP4700 D4703 LBAS16HT1G 100N-K
1 3 5 7
INPUT 1/1 C1
D/MGND
REMOTE3.3V
NC
NC
NC
232IMO
232OMI
F F
TO CN4700
2 4 6
10/50
CP4702 1 3 5 7 C4707
C4706 100N-K
G G
D/MGND
REMOTE3.3V
NC
NC
NC
232IMO
232OMI
C1+ VCC C4712
100N-K
9 10 11 12 13 14 15 16
5
8 7 6 5 4 3 2 1
C4711 V+ GND R4708 D4701 OPEN
100N-K
9
1K
C1 C1- T1 OUT
4
OPEN
C4715
C4716 C2+ R1 IN
100N-K
RS232C
8
C2- R1 OUT R4709
1K
RS232 PART
3
V- T1 IN R4710 D4702 OPEN
0
7
C4717
TO CN4702
T2 OUT T2 IN
100N-K
2
33P
33P
R2 IN R2 OUT R4711
1K
6
R4714
1K
1
IC4701
C4719
C4718
ILX3232D JACK4702
H H
2 4 6
J CN4702 1 3 5 7 J
D/MGND
REMOTE3.3V
TRG1
232IMO
232OMI
TRG_GND
TRG_+15V
1C
TO CP4702
RS232_CNT PART : AVR2113E3 ONLY
PREOUT 2/2 B8 : OTHER AVR
K K
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M
SCHEMATIC DIAGRAMS (6/24) M
VIDEO UNIT (3/3)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
124
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PAGE 1
A AMP B'D 1/2 A
R703
ZD401 R402 R401 1K2 R403 R404
ZJ5.1A 100K 1K2 OPEN R405 4.7K(1) R406
OPEN DHPTHF1608-105T C401
C402 100N-K
Q401 D401 OPEN TP401
KTA1024Y C403 R407
B OPEN C404 10N-K 10K B
220/50 1 2 3 Q403
R409 R410 R408 R411 150K 2N5401S
150K Q402 4.7K(1) Q404
JUMPER R415 2SD2390 R412 47K
OPEN 22(1) D402 R417
1SS133 270K R416 22K Q405
R413 R414 2N5401S
C405 C406 R432 10K 10K R419 22K
100P-J 220P-100V R418 2K7 Q409 ZD402 R423
OPEN R420 2SC3964 ZJ3.3B 10K
220/25
OPEN Q406 R421
R427 C408 R428 22K
1K2 47/50(ROB) 1K5 Q408 D403 R424 R425 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R426 R724
Q407 5K6 OPEN
R429 C409 VR401 R422
OPEN
OPEN
C407
KSA992F 33K OPEN 1K(B)-V OPEN
C410 C411 R430 R431
R433 ZD403 0R47(2) 0R47(2) C6
TO CN4213
470/16 OPEN
SPK_SMPS 1/2_A3
OPEN ZJ3.3B
C R434 C
D444
D443
R435
3K3(1) 560 D404
1SS133 E3 ONLY FL FL
5 4 3 2 1
R436 R437 R717 R438 FR FR
FL
470K C412 22K 220 220 R439
470P-100V C413 R710 Q411 Q412 22(1) Q410 C C
2N2-K JUMPER OPEN KTC3206Y 2SB1560
SL SL
R440 C435 SR SR
C520 150 OPEN
C414
FL_IN
OPEN OPEN CP402
C415 C416
R441 R442 10/100 10/100
1K2(1) JUMPER D405 D406 R443
47(1)
JUMPER JUMPER JP416
TO CN401
D FL OPEN D
13 12 11 10 9 8 7 6 5 4 3 2 1
AGND AGND
SL JP518
C5
AGND
C JUMPER +HIGHB
TO CN4212
SPK_SMPS 1/2_A5
10 9 8 7 6 5 4 3 2 1
AGND +HIGHB
SR +HIGHB
Q417 R493
AGND R444 R704 KSA992F 33(1) -HIGHB
ZD404 R446 1K2 1K2 R447 R445
FR ZJ5.1A 100K OPEN R448 4.7K(1) -HIGHB
OPEN R450
AGND C417 DHPTHF1608-105T C418 -HIGHB
Q413 D407 OPEN TP402 100N-K R551
SBL KTA1024Y OPEN C420 100(1) HIGHGND
220/50
23/33:AUDIO 1/4_O4
AGND 1 2 3 HIGHGND
E SBR R452 R453 R451 R454 150K
Q415
2N5401S HIGHGND
E
150K JUMPER Q414 4.7K(1) Q416
R458 2SD2390 R455 47K
16/19:AV 1/3_O4
OPEN 22(1) D408 C419 PREGND
CP401 1SS133 R460 R459 22K 100/100
R456 R457 270K
4A CP403
OPEN
OPEN
C421 C422 10K 10K R462 22K
R734
SBR_IN
R733
SBL_IN
FR_IN
SR_IN
AGND
AGND
AGND
AGND
AGND
AGND
SL_IN
100P-J 220P-100V R461 R476 Q421 ZD405
C_IN
OPEN R463 2K7 ZJ3.3B R466
2SC3964 10K R449
220/25
OPEN Q418 OPEN
R471 C424 R472
1K2 47/50(ROB) 1K5 Q420 D409 R467 R468 2N5551S R464
KSA992F 1SS133 0R47(2) 0R47(2) R469 R725 OPEN
Q419 5K6 OPEN BKT400
R473 C425 VR402 R465
OPEN
OPEN
C423
KSA992F 33K OPEN 1K(B)-V OPEN
R474 R475
OPEN
C426 C427 R477 ZD406 0R47(2) 0R47(2)
R508
HIGHGND
C4
OPEN
OPEN
+HIGHB
-HIGHB
470/16 OPEN OPEN ZJ3.3B
D458
D457
R478 CHASSIS
D446
D445
R479
TO 3405
3K3(1)
F 560 D410
1SS133 E3 ONLY DC_DET4 DC_DET4 F
5 4 3 2 1
R480 C428 R481 R718 R482 DC_DET3 DC_DET3
470K 22K 220 220 Q424 R483
FR
470P-100V C429 R711 Q423 KTC3206Y 22(1) Q422 ASO_DET ASO_DET
2N2-K JUMPER OPEN 2SB1560
RADI_THERMAL RADI_THERMAL
C521 R484 C499 TR_THERMAL TR_THERMAL
150 OPEN
OPEN C430 CN404
330/6.3
330/6.3
OPEN
1K2
OPEN
OPEN
47/10
C431 C432
10K
10K
R485 R486 OPEN OPEN
1K2(1) JUMPER D411 D412 R487
47(1)
JUMPER JUMPER JP520
R536
C514
C516
C513
C515
C517
R732
R731
OPEN
G G
JP544
JUMPER
R705
ZD407 R490 R488 1K2 OPEN R489
ZJ5.1A 100K 1K2 R491 R492 4.7K(1)
OPEN R494
Q425 C433 C434
KTA1024Y D413 OPEN TP403 DHPTHF1608-105T 100N-K
OPEN C436
220/50 1 2 3 Q427
R496 R497 R495 R498 150K 2N5401S
H 150K JUMPER Q426 4.7K(1) Q428 H
R502 2SD2390 R499 47K
OPEN 22(1) D414 R504
1SS133 270K R503 22K
R500 R501
C437 C438 10K 10K R506 22K
100P-J 220P-100V R505 R519 Q433 ZD408 R510
OPEN R507 2K7 2SC3964 ZJ3.3B 10K
220/25
220K Q430
R514 C440 R515
1K2 47/50(ROB) 1K5 Q432 D415 R511 R512 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R513 R726
Q431 5K6 OPEN
R516 C441 VR403 R509
OPEN
OPEN
KSA992F 33K OPEN 1K(B)-V OPEN C439
C443 R517 R518
C442 R520 ZD409 0R47(2) 0R47(2)
470/16 OPEN 220K ZJ3.3B
R521
D448
D447
3K3(1) R522
560 D416
1SS133 E3 ONLY
J R523
470K C444 R524
22K
R719
220
R525
220 R526
J
C
470P-100V C445 R712 Q435 Q436 22(1) Q434
2N2-K JUMPER OPEN KTC3206Y 2SB1560
R527 C467
150 OPEN
C522
OPEN C446
OPEN
C447 C448
R528 R529 OPEN OPEN
1K2(1) JUMPER D417 D418 R530
47(1)
JUMPER JUMPER JP468
OPEN
K JP537 K
JUMPER
ASO
HIGHGND
TR_THERMAL
RADI_THERMAL
DC_DET4
SR
+HIGHB
-HIGHB
SL
-B
PAGE 2
C2 AMP B'D 2/2_M1
SR_IN
SL_IN
SBR_IN
SBL_IN
C3
AGND
AGND
AGND
AGND
L TO 3C TO 2C L
PAGE 2
AMP B'D 2/2_A1
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M SCHEMATIC DIAGRAMS (7/24) M
AMP UNIT (1/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
125
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PAGE 2 PAGE 2
TO C3
AMP B'D 1/2_A10
3C R531 R706
AMP B'D 1/2_M10 TO C2
PAGE 2
A
ZD410
ZJ5.1A
R532
100K 1K2 1K2 R533
OPEN R535 R534 2C A
SBR_IN
SBL_IN
SR_IN
AGND
AGND
AGND
AGND
SL_IN
OPEN 4.7K(1) R537
ASO
HIGHGND
TR_THERMAL
RADI_THERMAL
C449 C450
DC_DET4
SR
+HIGHB
-HIGHB
SL
-B
Q437 D419 OPEN TP404 DHPTHF1608-105T 100N-K
KTA1024Y OPEN
C452 100/50 1 2 3 Q439
R539 R540 R538 R541 150K 2N5401S
150K JUMPER Q438 4.7K(1) Q440
R545 2SD2390 R542 47K
OPEN 22(1) D420 R547
1SS133 270K R546 22K
R543 R544
C453 C454 Q445 10K 10K R549 22K
100P-J 220P-100V R548 R560 2SC3964 ZD411 R553
OPEN R550 2K7 ZJ3.3B 10K
220/25
OPEN Q442
R557 C456 R558
1K2 47/50(ROB) 1K5 Q444 D421 R554 R555 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R556 R727
Q443 5K6 OPEN
R559 C457 VR404 R552
OPEN
OPEN
KSA992F 33K OPEN 1K(B)-V OPEN
C455
B R561 R562 B
C458 C459 R563 ZD412 0R47(2) 0R47(2)
470/16 OPEN OPEN ZJ3.3B
R564
D449
D450
R565
3K3(1) 560 D422
1SS133
E3 ONLY
SL
R566 C460 R567 R720 R568
470K 22K C461 R570 R716 220 220 Q447 Q448 R569
470P-100V 2N2-K 150 JUMPER 22(1) Q446
OPEN KTC3206Y 2SB1560
C451
C523 OPEN
OPEN C462
OPEN
C463 C464
R571 R572 OPEN OPEN
1K2(1) JUMPER D423 D424 R573
C 47(1) C
JUMPER JUMPER JP442
OPEN
JP535
JUMPER
R574 R707
ZD413 R575 1K2 1K2 R576 R577
ZJ5.1A 100K OPEN R578 4.7K(1)
OPEN R580
Q449 C465 C466
KTA1024Y D425 OPEN TP405 DHPTHF1608-105T 100N-K
D OPEN
C468 100/50 D
1 2 3 Q451
R582 R583 R581 R584 150K 2N5401S
150K JUMPER Q450 4.7K(1) Q452
R588 2SD2390 R585 47K
OPEN 22(1) D426 R590
1SS133 270K R589 22K
R586 R587
C469 C470 Q457 10K 10K R592 22K
100P-J 220P-100V R591 R605 2SC3964 ZD414 R596
OPEN R593 2K7 ZJ3.3B 10K
220/25
OPEN Q454
R600 C472 R601
1K2 47/50(ROB) 1K5 Q456 D427 R597 R598 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R599 R728
Q455 5K6 OPEN
R602 C473 VR405 R595
OPEN
OPEN
KSA992F 33K OPEN 1K(B)-V OPEN
C471
C475 R603 R604
C474 R606 ZD415 0R47(2) 0R47(2)
470/16 OPEN OPEN ZJ3.3B
E R607 R608 E
D452
E3 ONLY
D451
3K3(1) 560 D428
1SS133
R609 C476 R610 R721 R611
470K 22K C477 R715 220 220 Q459 Q460 R612
470P-100V 22(1) Q458
SR
2N2-K JUMPER OPEN KTC3206Y 2SB1560
R613 C483
C524 150 OPEN
OPEN C478
OPEN
C479 C480
R614 R615 10/100 10/100
1K2(1) R616
AMP B'D 2/2
JUMPER D429 D430 47(1)
JUMPER JUMPER JP494
OPEN
F F
JP539
JUMPER
R617 R708 R619
ZD416 R618 1K2 1K2 R620
ZJ5.1A 100K OPEN R621 4.7K(1) R623
OPEN
Q461 C481 DHPTHF1608-105T C482
KTA1024Y D431 OPEN TP406 100N-K
OPEN
C484 100/50 1 2 3 Q463
R625 R626 R624 R627 150K 2N5401S
G 150K JUMPER Q462 4.7K(1)
R631
Q464
2SD2390 R628 47K G
OPEN 22(1) D432 R633
1SS133 270K R632 22K
C486 R629 R630
C485 10K 10K R635 22K
100P-J 220P-100V R634 R648 Q469 ZD417 R639
OPEN R636 2K7 2SC3964 ZJ3.3B 10K
220/25
OPEN Q466
R643 C488 R644
1K2 47/50(ROB) 1K5 Q468 D433 R640 R641 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R642 R729
Q467 5K6 OPEN
R645 C489 VR406 R638
OPEN
OPEN
KSA992F 33K OPEN 1K(B)-V OPEN
C487
C491 R646 R647
C490 R649 ZD418 0R47(2) 0R47(2)
470/16 OPEN OPEN ZJ3.3B
R650
D454
R651
D453
3K3(1) 560 D434
1SS133 E3 ONLY
H R652 C492 R653 R722 R654 H
470K 22K 220 220 R655
SBL
470P-100V C493 R714 Q471 Q472 22(1) Q470
2N2-K JUMPER OPEN KTC3206Y 2SB1560
R656 C518
C525 150 OPEN
OPEN C494
OPEN
C495 C496
R657 R658 OPEN OPEN
1K2(1) JUMPER D435 D436 R659
47(1)
JUMPER JUMPER JP546
OPEN
TO CN4211
JP558
J JUMPER C7 J
SBL SBL
3 2 1
R660 R709
ZD419 R661 1K2 1K2 R662 R663 SBR SBR
ZJ5.1A 100K OPEN R664 4.7K(1)
OPEN R666
Q473 C497 C498 CP405
KTA1024Y D437 OPEN TP407 DHPTHF1608-105T 100N-K
OPEN
C500 100/50 1 2 3 Q475 SPK_SMPS 1/2_A4
R668 R669 R667 R670 150K 2N5401S
150K JUMPER Q474 4.7K(1) Q476
R674 2SD2390 R671 47K
OPEN 22(1) D438 R676
1SS133 270K R675 22K
R672 R673
K C501 C502 10K 10K R678 22K K
100P-J 220P-100V R677 R691 Q481 ZD420 R682
OPEN R679 2K7 2SC3964 ZJ3.3B 10K
220/25
OPEN Q478
R686 C504 R687
1K2 47/50(ROB) 1K5 Q480 D439 R683 R684 2N5551S
KSA992F 1SS133 0R47(2) 0R47(2) R685 R730
Q479 5K6 OPEN
R688 C505 VR407 R681
OPEN
OPEN
KSA992F 33K OPEN 1K(B)-V OPEN
C503
C507 R689 R690
C506 R692 ZD421 0R47(2) 0R47(2)
470/16 OPEN OPEN ZJ3.3B
R694 R693
D456
D455
3K3(1) 560 D440
1SS133 E3 ONLY
R695 C508 R696 R723 R697
470K 22K C509 R713 220 220 Q483 Q484 R698
470P-100V 22(1) Q482
SBR
2N2-K JUMPER OPEN KTC3206Y 2SB1560
L L
R699 C519
C526 150 OPEN
OPEN C510
OPEN
C511 C512
R700 R701 10/100 10/100
1K2(1) JUMPER D441 D442 R702
47(1)
JUMPER JUMPER JP572
OPEN
JP574
JUMPER
M GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL SCHEMATIC DIAGRAMS (8/24) M
AMP UNIT (2/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
126
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A SPK PART MAIN 1/2 A
R4000 470(2) H/PR
OPTION I RLY4000 HPV
BC3-12
OPTION J OPTION K
L4000 R4001 470(2) H/PL
SP-2507 JACK4000
C4000 C4001 C4002 FR_GND
47N(M)-50V
R4002 C4003 OPEN 22N FR_A
10 R4003 OPEN
L4001 10(2) FL_GND
FV C4004 C4005
B SP-2507 OPEN 22N B
FL_A
C4006
47N(M)-50V RLY4001
R4004 C4007 C4008 C4009
C_GND
10 R4005 OPEN JZC-42F OPEN 22N
10(2) CEN
L4002
SP-2507
R4007
7CH_AMP 1/2 O3
TO CP402
10(2) CV JACK4001
R4006 C4010
10 C4011 OPEN SR_GND
6C 47N(M)-50V RLY4002 C4012 C4013
CN4213 L4003 JZC-42F OPEN 22N
SP-2507 SR
C C
R4009 SL_GND
FL 10(2) C4014 C4015
5 4 3 2 1
R4008 C4016 OPEN 22N
FR
10 OPEN SL
C C4017
47N(M)-50V SUV
SL L4004 C4018 C4019 SBR_GND
SP-2507 RLY4003
SR JZC-42F OPEN 22N SBR
R4011
R4010 10(2) C4020 SBL_GND
10 C4021 C4022
C4023 OPEN OPEN 22N
7C 47N(M)-50V SBL
L4005
SP-2507
SBL
TO CP405
3 2 1
SBV
SBLGND R4013
D R4012
10(2) RLY4004 D
SBR
10 C4024 JZC-42F
C4025 OPEN
CN4211 47N(M)-50V
L4006 SP-2507
7CH_AMP 2/2 N9 C4026 -
R4014 R4015 C4027 1N-K
10 10(2) C4028 C4029 -
OPEN
C4030 C4031 -
47N(M)-50V C4032 1N-K
C4033 - *MODEL/AREA OPTION
5C C4034 - MODEL AVR-E400 AVR-X2000 OTHER AVR
E C4035 1N-K AREA E3 E3/E1C E2 U1B/N1B/K1B E
C4036 - OPTION I OPEN 47NF(M)/50V
TO CP403
+HIGHB
10 9 8 7 6 5 4 3 2 1
+HIGHB
C4037 - OPTION J OPEN 2N2F/50V
+HIGHB
C4038 1N-K OPTION K 22N/100V(PP 2A223J) OPEN
-HIGHB
C4039 - OPTION L 100N/100V(2A104J) 100N/250V
-HIGHB
C4040 - OPTION M 0.1UF/50V(PE 1H221J) 0.1UF/50V(SMS)
-HIGHB
C4041 1N-K OPTION O 10000uF/71V 12000uF/71V 10000uF/71V
HIGHGND
C4042 -
HIGHGND
C4043 -
HIGHGND
C4044 1N-K
PREGND
C4045 -
F C4046 - F
C4047 1N-K
CN4212 C4048 -
7CH_AMP 1/2 O5
CHASISGND
HPV
SUV
SBV
CV
FV
G G
C4049 100/50
Q4000 Q4002 Q4003 Q4004
D4000 R4016
D4003 R4019
D4002 R4018
D4004 R4020
Q4001
D4001 R4017
LBAS16HT1G 100
RT1P141C RT1P141C RT1P141C RT1P141C
LBAS16HT1G 20
LBAS16HT1G 20
LBAS16HT1G 20
LBAS16HT1G 20
RT1P141C
Q4005 Q4006 Q4007 Q4008 Q4009
RT1N141C RT1N141C RT1N141C RT1N141C RT1N141C
H H
CP4000
C/S_RL
C/S_RL
HPRL
SBRL
FRL
AC1
3 2 1
GND
AC2
OPTION L
C4050 C4051
100N 100N
R4022 R4023 R4024
OPEN OPEN OPEN
J OPTION O J
R4025 R4026 R4027
D4007 1K1(1) 1K1(1) 1K1(1) D4008
1SS133 D10SB60
ZD4002
R4028
OPEN
C4052
10K(1/4)
R4029
ZJ6.8B
10000/71
OPTION M
C4053
C4055 OPEN
100N(M)-50V
10/50
-
R4030
K C4054 K
OPEN
10000/71
C4057
C4056
CHASISGND
H/P_GND
MUTE+7V
RET_GND
C/S_RL
A_+8V_IN
H/PR
H/PL
HPRL
SBRL
FRL
C8
L REG PART L
TO 8C
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M SCHEMATIC DIAGRAMS (9/24) M
MAIN UNIT (1/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
127
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MAIN 2/2
TO C8
TUNER / REG PART
SPK PART 8C
A A
H/PR
H/PL
FRL
HPRL
RET_GND
MUTE+7V
SBRL
H/P_GND
C/S_RL
A_+8V_IN
B B
VIDEO_F/CNT 2/2 J9
CP4003
HDAM_GND
1
HDAM_GND
2
OPTION A A_-7V A_-7V
3
A_-7V
4
D4010 D4009 TRG_15V TRG_15V H/P_GND
5
1N4007 1N4007
H/PL H/P_L
6
2200/25
C VIDEO_F/CNT 2/3 G9 D4011 D4012 H/P_GND H/P_GND C
C4058
7
1N4007 1N4007
TO CN4003
D4013 RB721Q-40(SCHOTTKY) H/PR H/P_R
8
CP4002 MUTE+7V MUTE+7V
9
IC4000
KIA7805API FRL RLY_F
10
D4014 1N4007
TRG 15V V_+5V_IN V_+5V C/S_RL RLY_C/S
15
IN OUT
11
TRG 15V SBRL RLY_SB
14
12
D4015 1N4007
C4060
4700/16
+5V_IN HPRL RLY_H/P
10/50
C4059
R4033
OPEN
D4016
1SS133
13
13
TO CN4002
+5V_IN V_-5V V-5V
14
12
D4017 1N4007
VGND V-5V
15
11
VGND VGND VGND VGND VAGND
10
16
D4018 1N4007
-5V_IN VAGND
9
17
R4034
OPEN
C4061
D4019
3300/16
-5V_IN V_+5V V+5V
10/50
1SS133
C4062
D D
18
8
D4020 1N4007
+8V_IN V+5V
19
7
+8V_IN
6
D4021 1N4007 IN OUT
RET_GND V_-5V_IN V_-5V 6B
5
RET_GND IC4001
4
D4022 1N4007 KIA7905PI
RET_GND
3
-8V_IN D4023
2
D4024 1N4007 RB721Q-40(SCHOTTKY)
-8V_IN
AVRE400/X2000 : 4700UF/25V
1
OPTION H D4026 OPEN
7B OTHER AVR : 6800UF/25
D4025 1N4007
D4027 1N4007
OPTION C IC4002 OPTION E IC4003
OPTION F
E OPTION D KIA7808API KIA7805API E
D4028 1N4007
D4029 1N4007 IN OUT A_+8V IN OUT
INPUT 1/1 K1
470/50(SMS)
CP4006
4700/25
C4064
470/50(SHL)
C4063
D4031
D4030 1N4007
10/50
C4065
1SS133
ZD4000
C4066
OPEN
TRG_15V TRG_15V
R4054
D4032
D4033 1N4007
11
1SS133
TO CN4006
VGND TRG_GND
10
D4034 1N4007
0
D4035 1N4007 NC
9
RET_GND RET_GND DA_+5V DA_+5V
8
A_+7V A_+7V
ZD4001
D4037
OPEN
7
1SS133
470/50(SHL)
R4055
D4036 A_+7V
4700/25
1N4007
C4068
6
C4067
0
RET_GND
5
OPTION G OPTION B
F RET_GND RET_GND F
4
D4038 RET_GND
IN OUT
3
A_-8V_IN A_-8V A_-7V A_-7V
2
IC4004 1N4007 A_-7V
1
KIA7908PI
* MODEL / AREA OPTION
7A
MODEL AVR-E400 AVR-X2000 OTHER AVR D4039
OPEN
AREA E3 E3/E2/E1C U1B/N1B/K1B
OPTION A X O OPTION H R4035 0
OPTION B O X
OPTION C 4700UF/25V 6800UF/25V
OPTION A
G OPTION D KIA7808API BA08T G
OPTION E 470UF/50V(SHL) 100UF/16V(SMS)
OPTION F 470UF/50V(SMS) 100UF/16V(SMS)
OPTION G OPEN ZJ33B
OPTION H OPEN RB721Q
OPEN
OPEN
0
C4070 OPEN
R4041 100
R4032
R4053
R4031
R4039
C4072
OPEN
82K
PACK4000
H H
TUNERL TUNERL
8 7 6 5 4 3 2 1
TUNERR TUNERR INPUT 1/1 L1
C4073
BD4000 CBW160808U121T
R4040
OPEN
TU_5V
82K
TU_5V/9V CP4007
TO CN4703
SCLK TU_SCLK/SCL
R4042 33 C4076 OPEN TUNERL. TUNERL
SDIO TU_SDIO/SDA
9
SEN TU_SEN TU_GND TU_GND
8
R4043 100
RST TU_RST/ST TUNERR. TUNERR
7
R4046 1K R4048 33
GPIO2 TU_GPIO2/TUNED TU_5V TU_GND
6
TU_SCLK/SCL TU_SCLK/SCL TU_SCLK/SCL
5
100P-J
100P-J
100P-J
100P-J
100P-J
OPEN
OPEN
TU_SDIO/SDA. TU_SDIO/SDA. TU_SDIO/SDA
4
TU_SEN TU_SEN TU_SEN
J J
3
TU_RST/ST. TU_RST/ST. TU_RST/ST
2
C4080
R4050
C4079
C4078
C4077
C4081
R4051
TU_GPIO2/TUNED. TU_GPIO2/TUNED. TU_GPIO2/TUNED
1
C4082 100N-K
6A
CHASISGND
K K
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M
SCHEMATIC DIAGRAMS (10/24) M
MAIN UNIT (2/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
128
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
HDMI SW
A
CEC_COM
ADV3002 A
RXC_5V
N1001
AD3PBC19G0-T R1001 R1005 R1009 R1013
1K 10K 47K OPEN
HP_DET
9 10 11 12 13 14 15 16 17 18 19
+5V
GND
DDC_SDA Q1001
RT1N141C
DDC_SCK Q1005
RT1N441C
B N.C B
CE_REMOTE
TXC-
HDMI_IN1
TXC_SHLD
TXC+
TX0-
TX0_SHLD
8
TX0+
7
TX1-
6
TX1_SHLD
5
TX1+
4
TX2- CEC5V
3
C TX2_SHLD C
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
2
TX2+
1
R1037 R1038
10K OPEN
C1034
C1036
C1032
C1038
C1033
C1035
C1037
DGND
RXE_5V
N1002 R1002 R1006 R1010 R1014
AD3PBC19G0-T 1K 10K 47K OPEN
CEC3.3V
HP_DET
9 10 11 12 13 14 15 16 17 18 19
1N-K
1N-K
1N-K
1N-K
1N-K
+5V
D GND D
DDC_SDA Q1002
C1029
C1023
C1025
C1027
C1031
RT1N141C
DDC_SCK Q1006 DGND
RT1N441C R1024 4K7
N.C
CE_REMOTE R1025 4K7
HDMI_IN2
TXC-
TXC_SHLD
TXC+
TX0-
TX0_SHLD
8
100N-K
100N-K
TX0+
4.7U-K-1608
7
4K7
TX1-
6
E TX1_SHLD E
OPEN
OPEN
OPEN
OPEN
OPEN
5
TX1+
C1003
C1005
R1028
4
TX2-
3
C1014
C1010
C1012
C1013
C1015
C1011
C1009
TX2_SHLD OPEN
2
TX2+ R1017 2K2 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
1
DDCC_SCL
INHDATA0+
INHDATA0-
INEDATA0+
INEDATA0-
INHDATA2+
INHDATA2-
INEDATA2+
INEDATA2-
INHDATA1+
INHDATA1-
INEDATA1+
INEDATA1-
I2C_ADDR0
INECLK+
INECLK-
AVCC
AVCC
AVEE
R1039 R1040 R1019 10K R1034 33 HSDA
HPD_H
61 40
HPD_E
10K OPEN DDCC_SDA R1018 2K2
R1020 10K 62 39
R1021 10K R1032
C1002
OPEN
OPEN
63 38
C1001
4K7 R1035
64 AMUXVCC 61:EDID_SCL 40:I2C_SDA INHCLK-37 OPEN
R1022 OPEN 62:EDID_SDA 39:I2C_ADDR1
D1001 65 CEC_OUT 63:EDID_ENABLE 38:INHCLK+ RESETB36
LRB521S-30 R1023 OPEN 66 CEC_IN OUTCLK- 35 RXC_C- R1036
F 67 DDC_SCL_COM OUTCLK+ 34 RXC_C+ 1K F
RXF_5V
N1003 C1007 100N-K
1N-K
68 DDC_SDA_COM AVCC 33
AD3PBC19G0-T R1003 R1007 R1011 R1015
1K 10K 47K OPEN 69 DDC_SCL_H U1001 OUTDATA0-32 RXC_0- ADV3002_RST
70 DDC_SDA_H ADV3002BSTZ OUTDATA0+31 RXC_0+
C1016
Q1009
HP_DET DEVICE ADDRESS : 0x90 OPEN
9 10 11 12 13 14 15 16 17 18 19
71 DDC_SCL_E AVEE 30
+5V 72 DDC_SDA_E OUTDATA1-29 C1008 OPEN RXC_1-
GND 73 DDC_SCL_F OUTDATA1+28 RXC_1+
DDC_SDA Q1003
RT1N141C 74 DDC_SDA_F I2C_SCL 27 R1033 33 HSCL
DDC_SCK Q1007 75 DDC_SCL_G 78:P5V_E OUTDATA2-26 RXC_2-
RT1N441C 23:INGDATA2+
N.C 76 DDC_SDA_G 79:P5V_F OUTDATA2+25
22:INGDATA2- RXC_2+
CE_REMOTE 77 P5V_H 80:P5V_G 21:AVEE TX_EN 24 R1031 4K7
HDMI_IN3
TXC-
INGDATA0-
INGDATA0+
G G
INFDATA0-
INFDATA0+
INFDATA2-
INFDATA2+
INGDATA1-
INGDATA1+
INFDATA1-
INFDATA1+
78 23
TXC_SHLD
INGCLK-
INGCLK+
INFCLK-
INFCLK+
HPD_G
79 22
HPD_F
TXC+
AVCC
AVCC
SEL0
SEL1
80 21
TX0-
D2
TO 2D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
TX0_SHLD
8
TX0+
FROM
7
TX1- RESETB
6
TX1_SHLD D.SUPPLY
100N-K
100N-K
4K7
4K7
5
TX1+
4
TX2-
3
C1004
C1006
R1030
R1029
TX2_SHLD
2
TX2+ C9
1
H R1041 R1042
H
10K OPEN DGND
CEC3.3V
RXG_5V CEC5V
4K7
4K7
HPD5V
N1004 HSCL
AD3PBC19G0-T R1004 R1008 R1012 R1016
R1026
1K 10K 47K OPEN
R1027
TO 9C
HSDA
HP_DET ADV3002_RST
9 10 11 12 13 14 15 16 17 18 19
+5V CEC_COM
GND
DDC_SDA Q1004
J DDC_SCK
RT1N141C
J
Q1008
N.C RT1N441C DDCC_SDA
CE_REMOTE DDCC_SCL
HDMI_IN4
TXC-
TXC_SHLD RXC_C-
TO
TXC+ RXC_C+ HDMI RX
TX0-
TX0_SHLD
RXC_0-
RXC_0+ ADV7850
8
TX0+ RXC_1-
7
TX1- RXC_1+
6
TX1_SHLD RXC_2-
5
K TX1+ RXC_2+ K
4
TX2-
3
TX2_SHLD
2
TX2+ RXC_5V
1
TO 1D
R1043 R1044 RXE_5V
10K OPEN
RXF_5V
RXG_5V
D1
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M M
SCHEMATIC DIAGRAMS (11/24)
HDMI UNIT (1/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
129
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
R1201 R1203 R1205 R1206 AVR-E400/X2000 FRONT HDMI
OPEN OPEN 47K OPEN
A R1202
A
0
TX_EN.
DDC_SCL
DDC_SDA
R1204
0
N1201
AD3PBC19G0-T
Q1201
OPEN HPA_D..
HP_DET
9 10 11 12 13 14 15 16 17 18 19
Q1202
+5V OPEN
GND
DDC_SDA
DDC_SCK N1202
FRONT_HDMI
N.C 1.0-16-23PB-2
B CE_REMOTE CEC
B
TXC- CEC CEC
23
R1207 R1208
TXC_SHLD HPA_D.. HPDF
22
0 0
TXC+ TX_EN. TX_EN
21
DDC_SDA DDCA_SDA
10U-K-2012
TX0-
20
TX0_SHLD DDC_SCL DDCA_SCL
19
OPEN
OPEN
OPEN
OPEN
8
L1202 0-2012 .HDMI5V
2K2
2K2
TX0+ HDMI5V
18
7
L1203 0-2012 .CEC5V
TX1- CEC5V
17
6
CEC3.3V
R1210
TX1_SHLD
R1211
16
TO
C1220
C1222
C1223
C1219
C1221
5
L1201 0-2012 .CEC3.3V
TX1+ CEC3.3V
15
4
DGND2 DGND
TX2- HDMI RX
14
3
C TX2_SHLD DGND C
13
ADV7850
2
100N-K
TX2+ RX_C- RX_C-
OPEN
OPEN
12
1
RX_C+ RX_C+
0
0
11
DGND
10
10K
TO N1301
RX_0-
R1209
RX_0-
C1205
R1214
R1212
R1213
9
D1202
D1203
D1201
OPEN
OPEN
OPEN-1608 RX_0+ RX_0+
8
OPEN
R1045
DGND
7
RX_1- RX_1-
SCL_IN 40
SDA_OUT 34
SDA_IN 39
VREF_IN 36
CEC_IN 38
32
VREF_OUT 33
SCL_OUT 35
6
AVEE 37
31
C1206
100N-K RX_1+ RX_1+
5
R1216
IN0 AVCC
21 22 23 24 25 26 27 28 29 30
DGND
4
IP0 PE_EN
RX_2- RX_2-
3
IN1 TX_EN
RX_2+ RX_2+
3
D 41
D
2
10N-K
OPEN
IP1 AVEE
DGND
4
C1201 100N-K
1
0
VTTI U1201 AVCC
5
IN2 AD8195 AVCC C1207 D3
6
100N-K
C1210
R1215
R1217
IP2 AVEE
7
IN3 AVCC
8
31 : CEC_OUT AVCC C1208
IP3 32 : AMUXVCC 10U-K-2012
10 9
C1202 100N-K AVCC COMP
16 AVCC
13 VTTO
12 OP0
17 ON2
19 ON3
18 OP2
20 OP3
14 ON1
15 OP1
ON0
AD8195
11
10U-K-2012
100N-K
100N-K
OPEN
OPEN
OPEN
OPEN
OPEN
1N-K
1N-K
E E
C1204
C1203
C1209
C1214
C1216
C1212
C1218
C1213
C1217
C1211
RX_C-
RX_C+
RX_0-
RX_0+
RX_2-
RX_2+
RX_1-
RX_1+
F F
R1251
OPEN
R1253
OPEN
R1252
R1255
47K
R1256
OPEN
OTHER AVR
0
.DDC_SCL
.DDC_SDA
.TX_EN.
R1254
0
N1251
G AD3PBC19G0-T
Q1251 G
OPEN .HPA_D..
HP_DET
9 10 11 12 13 14 15 16 17 18 19
Q1252
+5V OPEN
GND
DDC_SDA
DDC_SCK N1252
FRONT_HDMI
N.C 1.0-16-23PB-2
CE_REMOTE .CEC
TXC- .CEC CEC
23
R1257 R1258
TXC_SHLD .HPA_D.. HPDF
22
0 0
TXC+ .TX_EN. TX_EN
21
H .DDC_SDA DDCA_SDA H
10U-K-2012
TX0-
20
TX0_SHLD .DDC_SCL DDCA_SCL
19
OPEN
OPEN
OPEN
OPEN
8
L1252 0-2012 ..HDMI5V
2K2
2K2
TX0+ HDMI5V
18
7
L1253 0-2012 ..CEC5V
TX1- CEC5V
17
6
CEC3.3V
R1260
TX1_SHLD
R1261
16
C1269
C1270
C1272
C1273
5
C1271
TO
L1251 0-2012 ..CEC3.3V
TX1+ CEC3.3V
15
4
TX2- DGND3 DGND
HDMI RX
14
3
TX2_SHLD DGND
13
2
TX2+ .RX_C- RX_C- ADV7850
100N-K
OPEN
OPEN
12
1
.RX_C+ RX_C+
0
0
11
DGND
10
10K
R1264
.RX_0- RX_0-
R1262
R1263
R1259
C1255
J J
9
D1251
OPEN
OPEN
D1252
D1253
OPEN-1608 .RX_0+ RX_0+
8
OPEN
R1046
DGND
7
.RX_1- RX_1-
SCL_IN 40
SDA_OUT 34
SDA_IN 39
VREF_IN 36
CEC_IN 38
32
VREF_OUT 33
SCL_OUT 35
6
AVEE 37
31
C1256
100N-K .RX_1+ RX_1+
5
R1266
IN0 AVCC
21 22 23 24 25 26 27 28 29 30
DGND
1
4
IP0 PE_EN
.RX_2- RX_2-
2
3
IN1 TX_EN
.RX_2+ RX_2+
3
41
2
10N-K
OPEN
IP1 AVEE
DGND
4
C1251 100N-K
1
0
VTTI U1251 AVCC
5
IN2 AD8195 AVCC C1257
6
C1260
100N-K
R1265
R1267
IP2 AVEE
7
K IN3 AVCC K
8
31 : CEC_OUT AVCC C1258
IP3 32 : AMUXVCC 10U-K-2012
10 9
C1252 100N-K AVCC COMP
16 AVCC
13 VTTO
12 OP0
17 ON2
19 ON3
18 OP2
20 OP3
14 ON1
15 OP1
ON0
AD8195
11
10U-K-2012
100N-K
100N-K
OPEN
OPEN
OPEN
OPEN
OPEN
1N-K
1N-K
C1254
C1253
C1264
C1266
C1262
C1268
C1263
C1259
C1267
C1261
.RX_C-
.RX_C+
.RX_0-
.RX_0+
.RX_2-
.RX_2+
.RX_1-
.RX_1+
L L
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M M
SCHEMATIC DIAGRAMS (12/24)
HDMI UNIT (2/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
130
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
D7 TO DM860A
TO 7D NET PHY
A A
860SPDIF
DGND
NET3.3V
PHY_RST
MIIPHYCLK.
MIITXEN.
NET1.2V
E_RESETN
USBVBUS
MIITXD2.
MIITXD3.
USBVBUSDRV
USBD-
USBD+
E_SPI_MIEO
E_RXDMIEO
ESDA
E_SPI_CLK
MIIMDIO
ESCL
MIIRXDV
MIIRXER
E_SPI_MOEI
MIIRXD2
E_SPI_REQ
MIIRXD3
MIIMDC
E_TXDMOEI
E_SPI_CS
E_RESET
B B
D5
TO TO 5D
E_SPI_MIEO
E_SPI_REQ
E_SPI_MOEI
E_RXDMIEO
E_SPI_CS
E_SPI_CLK
860SPDIF
E_TXDMOEI
DIR/PLD
E_RESETN
USBVBUSDRV
E_RESET
MIIPHYCLK.
USBVBUS
PHY_RST
MIITXEN.
MIITXD2.
MIITXD3.
MIIMDIO
MIIRXDV
MIIRXER
MIIRXD2
MIIRXD3
MIIMDC
USBD-
USBD+
C C
D4
D5V TO 4D
NET3.3V
FROM
DGND D.SUPPLY
NET1.2V
USBVBUS
D D
USBD+
USBD-
USBVBUSDRV
USBVBUS
ESDA
ESCL
R2805
3R3 1 2
100N-K
L2806
OPEN
R2806 DLW21SN181SQ2L
0
3R3
R2863
R2864 4K7 R2865 4K7
100
4 3
R2860
R2859
C2853
E E
TO CN4402
N2801
ESDA
ESCL
20010WS-05 U2806 C2847 OPEN-1608
NCP380HMU15AATBG
C2845 100N-K
VBUS L2804 0-2012 OUT IN C2846 1N-K
6
1
0
1
D- ILIM GND U2805
2
MFI337S3959
D+ FLAG# EN
3
4
3
R2850
R2856
GND 7 GND
R2810
OPEN
GND VCC
4
8
1
OPEN-1005
OPEN-1005
OPEN-1608
OPEN-1608
GND
1U-K-1608
1U-K-1608
SDA RST
5
7
100N-K
OPEN
OPEN
R2809 NC SCL
6
3
2A OPEN
NC NC
5
9
C2804
C2806
C2809
R2808
C2803
C2805
R2807
C2810
C2811
F F
E_RESETN R2818 OPEN
PHY_RST R2819 33
C2815 1N-K
R2820 10K
C2813 470P-K
C2814 1U-K-1608
MIIPHYCLK.
G G
10K
10K
10K C2824 100N-K
6 5 4 3 2 1 R2831 R2834
R2822
R2823
R2825
VDDCR VDD2A 25 8K2-F 3K9-F
XTAL2
LED2
XTAL1
LED1
MIIRXD3 R2812 33 RXD1 RBIAS 24
7
MIIRXD2 R2813 33 8 RXD0 RXP 23 RXP4
C2812 100N-K 9 VDDIO U2802 RXN 22 RXN4
MIIRXER R2814 33 10 RXER LAN8720A TXP 21 TXP4
MIIRXDV R2815 33 11 CRS_DV TXN 20 TXN4
R2816 33 C2825 100N-K
14 nINTER
MIIMDIO 12 MDIO TXD0 VDD1A 19
TXEN
N2802
nRST
RJ-45 JACK(99TA-03188400023101) MDC TXD1
15 16 17 18 L2807 CBW201209U221T
13
H TXP4 H
4.7U-K-1608
1 2
OPEN-1608
MIIMDC R2817 100
9 C2807
1K5-F
TD+ 10P-D
10K
10K
1K5
1
TD- 4 3 TXN4
2
RD+ L2801
3
DLW21SN900HQ2L
R2824
R2826
R2828
R2827
C2820
TCT
C2821
4
RCT
5
RD- 1 2 RXP4
6
L2808 CBW201209U221T
NC
4.7U-K-1608
49.9-F-1608
49.9-F-1608
49.9-F-1608
C2808 49.9-F-1608
OPEN-1608
7
10P-D
GNDC
8
4 3 MIITXEN.
10 R2801 RXN4
0 L2802 MIITXD2.
R2802 DLW21SN900HQ2L
J OPEN MIITXD3. J
4.7U-K-1608 R2830
R2829
C2822
R2832
C2823
4.7U-K-1608 R2833
22N-K-1608
R2803 L2809 CBW201209U221T
OPEN-1608
OPEN-1005
OPEN-1005
OPEN-1005
OPEN-1005
10-F
1N-K-1608
1N-K-1608
C2802
C2801
D2804
D2802
D2803
D2801
C2816
C2819
C2818
C2817
L2810 CBW201209U221T
K K
E_RXDMIEO
E_SPI_MIEO
E_SPI_REQ
E_TXDMOEI
E_SPI_MOEI
E_SPI_CLK
E_RESET
L E_SPI_CS
TO CPU D6 L
TO 6D
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M M
SCHEMATIC DIAGRAMS (13/24)
HDMI UNIT (3/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
131
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SDRAM DM860A
A A
R2709 1 8
DM_A18/DQM1 .DM_A18/DQM1
.DM_A14/CAS
.DM_A15/BA0
33*4(AR)2
.DM_A13/RAS
.DM_A0
.NCS1
.DM_A16/BA1
.DM_A2
.DM_A3
.NWE
.DM_A10
.DM_A1
7
U2602 DM_A16/BA1 .DM_A16/BA1
6
8
8
8
5
5
7
7
DM860A DM_A15/BA0 3 6
.DM_A15/BA0 R2714 1 8
DM_D3
4
2
2
10K*4(AR) 3
10K*4(AR) 3
33*4(AR)2
1
1
JTAG
4 5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 DM_A12 .DM_A12
10K*4(AR)
7
R2710 1 DM_D2
R2702
R2703
R2701
JTAG
R2704 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 DM_A10 8
.DM_A10 3 6
33*4(AR) 33*4(AR)2 DM_D1
MP OPEN ETCK 1 8
TCK A
DM_A14/CAS
3
7
6
.DM_A14/CAS 4 5
DM_D0
ETDO 2 7
TDO USBD- NET3.3V DGND NET3.3V HIGHZ RXD1 TDO TDI DM_A0 DM_A1 DM_A13/RAS .DM_A13/RAS
4 5
N2601 ETMS 3 6
TMS DM_A17/DQM0 .DM_A17/DQM0
1.0-16-7PB-2 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 R2711
B ETDI 4 5
TDI DM_A11
33*4(AR)2
1 8
.DM_A11 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
B
A10/AP
A0
VDDQ
VDDQ
DQ0
7
BA0
A2
VDD
A3
CS
VDD
VDD
DQ2
DQ3
RAS
CAS
VSSQ
VSSQ
WE
NC
NC
NC
NC
NC
DM_A8 .DM_A8
A1
DQ1
BA1
B
7
UART
R2705 USBD+ NET3.3V DGND DGND TEST1_DM TXD1 RXD0 TMS SPICLK SPINCS1 DM_A2
SDRAM1 (32MB)
3 6
33*4(AR) DM_A7 .DM_A7 U2604
6
A3V56S30FTP-G6
GND R2601 OPEN DM_A5 4 5
.DM_A5
VDDQ
VDDQ
1 8
VSSQ
VSSQ
E_RXDMIEO TXD0
DQM
5
DQ4
C1 C2 C3 C4 C13 C14
DQ6
C5 C6 C7 C8 C9 C10 C11 C12 C15 C16 C17 C18
DQ8
CKE
DQ5
VSS
VSS
DQ7
VSS
R2712 1
CLK
RX
A12
NC
NC
NC
NC
A11
A4
A6
A9
A8
A5
8
A7
DEBUG_RX DEBUG_TX 2 7
TXD1
4
33*4(AR)2 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
TX DEBUG_TX E_TXDMOEI 3 6
RXD0 C DM_A9 7
.DM_A9
3
3.3V 4 5
DGND USBREXT USBXI NRES12OUT DGND RREF TXD0 TCK SPINCS0 DM_A3 DM_A4 DM_A5 DM_A3 3 6
.DM_A3
DEBUG_RX RXD1
2
4 5
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 DM_A6 .DM_A6
1
SPI
R2706 R2713 1 8
33*4(AR) DM_A4 .DM_A4 1 8
DM_D7
.DM_A17/DQM0
1 8 D 33*4(AR)2 7 R2715 2
E_SPI_CLK SPICLK DM_A2 .DM_A2 7
DM_D6
2 7
NET1.2V USBVBUS NRES33OUT NRES33REF NRES12REF NET3.3V NET1.2V NRESET SPIDIN SPIDOUT DM_A6 DM_A7 DM_A8 3 6 33*4(AR)3
E_SPI_MIEO SPIDOUT DM_A1 .DM_A1
.MEMCKE
MEMCLK1
6
DM_D5
.DM_A12
.DM_A11
.DM_A4
.DM_A6
.DM_A9
.DM_A8
.DM_A5
.DM_A7
3 6 E1 E2 E3 E4 E13 E14 4 5
E_SPI_MOEI SPIDIN E5 E6 E7 E8 E9 E10 E11 E12 E15 E16 E17 E18 DM_A0 .DM_A0 4 5
C E_SPI_CS 4 5
SPINCS0
DM_D4 C
N2602 R2604 10K E
1.0-16-6PB-2 SPINCS1 DGND USBID USBVBUSDRV NET1.2V NET1.2V NET3.3V NET3.3V NET1.2V NET1.2V NET3.3V NET3.3V DM_A9 DM_A10 DM_A11 DM_A12
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18
6
ETMS R2707 10K HIGHZ
5
.DM_A14/CAS
.DM_A15/BA0
.DM_A13/RAS
.DM_A0
.NCS1
.DM_A16/BA1
.DM_A2
.DM_A3
.NWE
.DM_A10
.DM_A1
ETCK R2721 10K TEST1_DM F
4
NET3.3V RTCXIN VDD33PLL NET3.3V DGND DGND DGND DGND DGND DGND DGND DGND NET1.2V DM_A13/RAS DM_A14/CAS DM_A15/BA0 DM_A16/BA1 R2716 1
ETDI DM_D0 8
DM_D11
3
ETDO R2618 13K-D-1608 G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 33*4(AR)2 7
DM_D1 DM_D10
2
R2619 6K2-D-1608
RESET DM_D2 3 6
DM_D9
1
G
4 5 NRES12REF VDD12DCO RTCXOUT DGND NET3.3V DGND DGND DGND DGND DGND DGND DGND DGND NET1.2V DM_A17/DQM0
DM_A18/DQM1 DM_D3 4 5
DM_D8
R2708
NRES33REF DM_D4
10K*4(AR) 3 6 H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18
D 2 7 NRES12OUT DM_D5
27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D
1 8 NRES33OUT H DM_D6
A10/AP
R2654
A0
VDDQ
VDDQ
DQ0
DGND DGND VDD12PLL NET1.2V DGND DGND DGND DGND DGND DGND DGND DGND NET3.3V NCS3
BA0
A2
VDD
A3
CS
VDD
VDD
DQ2
DQ3
RAS
CAS
VSSQ
VSSQ
WE
NC
NC
NC
NC
NC
A1
OPEN
DQ1
BA1
DM_D7
R2653
0
E_RESETN R2605
R2606
33
33
J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17
NCS2
J18 DM_D8 SDRAM2 (32MB) U2605
A3V56S30FTP-G6
VDDQ
VDDQ
VSSQ
VSSQ
DM_D9
DQM
DQ4
DQ6
DQ8
CKE
DQ5
VSS
VSS
DQ7
VSS
CLK
A12
NC
NC
NC
NC
A11
A4
A6
A9
A8
A5
A7
Q2601 R2607 33 NRESET J DM_D10
OPEN E_SPI_REQ. CPRST XTALO NET1.2V DGND DGND DGND DGND DGND DGND DGND DGND NET3.3V NCS0 NCS1 MEMCKE 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
DM_D11
K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 DM_D12
OPEN
C2601
DM_D13
CLOCK
1N-K E_SPI_REQ R2608 33
Q2602 K
OPEN PDOUT0 VCO0 XTALI NET3.3V DGND DGND DGND DGND DGND DGND DGND DGND NET1.2V MEMCLK NWE NOE NWAIT DM_D14 DM_D15
.DM_A18/DQM1
5 4
R2609 10K E_SPI_REQ. DM_D15 DM_D14
R2602
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 R2718 6 3
DM_D13
MEMCLK2
.MEMCKE
E E
.DM_A12
7 2
.DM_A11
.DM_A4
.DM_A6
.DM_A9
.DM_A8
.DM_A5
.DM_A7
R2610 10K 33*4(AR)
PDOUT0 L 8 1 DM_D12
R2611 10K VCO0 AV0CLK NET3.3V DGND DGND DGND DGND DGND DGND DGND DGND NET1.2V DM_D3 DM_D2 DM_D1 DM_D0
E_RESET M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18
C2602 12P-G X2601 24MHz(XS-3225) XTALI
1 ST VDD 4
1
2
FCXO-05 R2603 R2621 XTALO M
GND OUT OPEN R2612 1M AV0DATA3 NET1.2V DGND DGND DGND DGND DGND DGND DGND DGND NET3.3V DM_D7 DM_D6 DM_D5 DM_D4 R2638 OPEN
1K NOE
4
2 3 C2603 12P-G
3
U2601 R2613 10K
RTC
RTCXIN
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N18
NCS3 R2636 33
OPEN-22.5792MHz N R2643 33
RTCXOUT NWE .NWE
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
AV0DATA2 AV0DATA1 AV0DATA0 AV1DATA3 NET1.2V DGND DGND DGND DGND DGND DGND DGND DGND NET3.3V DM_D11 DM_D10 DM_D9 DM_D8 R2644 33
MEMCKE .MEMCKE
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 MEMCLK R2641 33 MEMCLK1
F R2642 33 MEMCLK2 F
C2664
C2660
C2680
C2666
C2662
C2663
C2665
C2667
C2676
C2679
C2677
C2661
R2614 3K-F-1608 P
RREF AV1DATA2 AV1DATA1 AV1DATA0 NET3.3V NET3.3V NET1.2V NET1.2V NET3.3V NET3.3V NET1.2V NET1.2V FD0 FD1 DM_D13 DM_D12 NCS0
NCS1 R2646 33 .NCS1
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18
R2637
6
8
5
7
R OPEN R2719
AV2CLK AV2CTRL1 AV2DATA2 PHY_RST VPP MIITXEN MIIRXER MIICRS FD2 FD3 FD4 DM_D14 4K7*4(AR)
C2651
4
2
3
ETHER
R2648 OPEN
1
OPEN
T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T18 NWAIT R2649 OPEN
T
AV2CTRL0 AV2DATA1 AV3CTRL1 MIIRXCLK MIICOL MIIRXDV FD5 FD6 FD7 DM_D15
U1 U2 U3 U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 U17 U18
G CPRST G
MIIRXD2
U
AV2DATA0 AV3CTRL0 860SPDIF. MIITXD2 MIIRXD2 MIIMDIO NFCE0 FCLE NFWE NFRB NAND FLASH (1G)
MIIRXD3
V1 V2 V3 V4 V5 V6 V7 V8 V9 V10 V11 V12 V13 V14 V15 V16 V17 V18
NAND
MIIRXCLK FD0
MIIRXDV V FD1
MIIRXER MIITXD3 MIIRXD3 MIIMDC MIIPHYCLK NFWP NFRE FALE
FD2 U2603
4K7
4K7
H27U1G8F2BTR
FD3
MIITXD2. R2615 33 MIITXD2 FD4
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
NC NC
1
MIITXD3. R2616 33 MIITXD3
R2652
FD5
R2651
NC NC
2
MIITXEN. R2617 33 MIITXEN FD6 NC NC
3
FD7 NC NC
4
H MIICOL
FALE NC I/O7 FD7 H
5
MIICRS NC I/O6 FD6
FCLE
6
USBVBUSDRV
MIIMDC
AV3CTRL0
NFRB FD5
AV0DATA0
AV2DATA0
AV0DATA2
AV0DATA3
R/B# I/O5
AV2CTRL0
AV2DATA2
860SPDIF.
AV3CTRL1
AV0DATA1
AV1DATA0
AV2DATA1
AV1DATA2
AV1DATA3
AV2CTRL1
7
AV1DATA1
DAC
MIIMDIO NFCE0
AV0CLK
AV2CLK
USBREXT
USB
NFRE FD4
USBVBUS
RE# I/O4
8
R2620 33
USBD+
USBD-
MIIPHYCLK. MIIPHYCLK NFRB
USBID
USBXI
NFCE0 CE# NC
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
NFRE NC NC
NFWE NC NC
NFWP C2659 100N-K VCC VCC C2678 100N-K
PHY_RST VSS VSS
OPEN
OPEN
33 NC NC
33
10
10
33
33
33
33
NC NC
6
8
8
5
5
7
7
J R2717 4 FCLE CLE NC
J
4
2
2
47*4(AR)3
47*4(AR)3
1
1
R2624
R2626
R2628
R2623
R2625
R2627
FALE ALE I/O3 FD3
R2630
R2629
R2720
R2632
R2631
NFWE FD2
2K7
WE# I/O2
1K5
0
NFWP FD1
DM860_MCLK
WP# I/O1
DM860_LRCK
DM860_DATA
DM860_BCLK
860SPDIF
NC I/O0 FD0
ESDA
ESCL
R2634
R2633
R2635
VD4
VD0
VD6
VD2
VD3
VD5
BCLK
VD7
VD1
NC NC
NC NC
OPEN
OPEN
4K7
4K7
10K
NC NC
NC NC
R2640
R2645
R2650
R2639
R2647
K K
VDD12DCO
VDD12PLL
L2602
VPP NET3.3V VDD33PLL NET1.2V BLM21PG221
R2622 L2601 L2603 NET3.3V NET1.2V
1K5 BLM21PG221 BLM21PG221
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
OPEN-1608
OPEN-1608
OPEN-1608
100N-K
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
1N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
OPEN
OPEN
OPEN
OPEN
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
DM860_DAC_MUTE
C2604
OPEN
C2654
C2669
C2668
C2674
C2656
C2670
C2652
C2658
C2653
C2655
C2672
C2673
C2657
C2675
C2671
C2644
C2640
C2646
C2649
DM860_BCLK
C2606
C2609
C2624
C2642
C2648
C2608
C2620
C2634
C2643
C2630
C2645
C2605
C2650
DM860_DATA
DM860_MCLK
DM860_LRCK
C2626
C2629
C2636
C2639
C2622
C2628
C2647
C2607
C2623
C2632
C2638
C2633
C2625
C2635
C2627
C2637
USBVBUSDRV
C2614
C2641
C2610
C2616
C2619
C2612
C2618
C2621
C2613
C2631
C2615
C2617
C2611
L L
E_RXDMIEO
E_RESETN
E_SPI_MIEO
E_SPI_REQ
MIIPHYCLK.
E_TXDMOEI
USBVBUS
E_RESET
E_SPI_MOEI
E_SPI_CS
E_SPI_CLK
MIITXD2.
MIITXD3.
MIITXEN.
PHY_RST
MIIRXD2
MIIRXD3
MIIRXDV
MIIRXER
MIIMDC
MIIMDIO
860SPDIF
NET3.3V
USBD+
NET1.2V
USBD-
DGND DGND
VD4
VD0
VD6
VD2
VD3
VD5
BCLK
VD7
VD1
DGND
ESDA
ESCL
7D
TO D7 TO NET PHY TO HDMI TX D9
TO D8
TO 9D MAIN DAC
TO 8D
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL
M M
SCHEMATIC DIAGRAMS (14/24)
HDMI UNIT (4/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
132
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OTHER AVR
｡ﾘ OPTION TABLE E400E3 X2000E3 X2000E2/E1C/K U1B/N1B/K
R2213 0Ω 0Ω 0Ω X
TO 4E
TO D5 TO 3E
DIR/PLD
R2221 0Ω 0Ω X X
A R2203 X X 33Ω 33Ω TO 2E A
C2204 X X 100N-K 100N-K
TO TO
R2205 150Ω 150Ω X 150Ω TO
R2207 HDMI RX E4 HDMI RX/HDMI TX E2
TO CPU
C2207 NET PHY
R2211
10N-K
470Ω
10N-K
470Ω
X
X
10N-K
470Ω 5D ADV7850 (ADV7850/ADV8003) E3
ADV7850_INT2
R2216 47KΩ 47KΩ X 47KΩ *FILTER COMPONENTS
ARCSPDIF
330KΩ 330KΩ X 330KΩ
860SPDIF
JT_TDI/AP_DA/DAC_DA
JT_TCK/AP_CK/DAC_CK
PLDAERR.
R2217
JT_TMS/AP_CS
CLK_SEL
DAC_ETHER_MUTE
DA_POWER
PLD_WRITE
DAC_MUTE
RXSPDIF
CEC3.3V
DIR_DOUT
DAC_RST
DAC_MS
CEC1.8V
DIR_CE
VALUE TYPE TOLERANCE
DIR_CLK
DIR_DIN
RX64FS
TXSPDIF
JT_TDO
DIR_RST.
RXMCK
RXI2S0
TX64FS
RXI2S2
RXI2S3
RXI2S1
TXMCK
C2216 100N-K 100N-K X 100N-K
TXI2S0
TXI2S2
TXI2S3
TXI2S1
RXFS
TXFS
C2215 4.7UF 4.7UF X 4.7UF R2225 680 Ω METAL FILM OR CARBON 0 Ω < 5%
U2204 TC74VHCU04FTTC74VHCU04FT X TC74VHCU04FT C2220 0.068UF FILM OR CERAMIC (CH OR C0G) < 5%
R2204 X X X 150Ω C2221 0.0047UF FILM OR CERAMIC (CH OR C0G) < 5%
B R2206 B
C2206 X X X 10N-K
R2210 X X X 470Ω
R2214 X X X 47KΩ
R2215 X X X 330KΩ
R2213 0Ω 0Ω 0Ω X
R2238 X X X 33Ω
U2202 OPEN OPEN USE USE
K2201 USE USE OPEN USE
K2202 OPEN OPEN OPEN USE
R2222 OPEN OPEN 0Ω OPEN
R2226
C C
DIR_RST.
R2254
1K
C2214 1N-K
DIR860SPDIF
10/16-MVG
10/16-MVG
DIRRXSPDIF
100N-K
100N-K
RXSPDIF
RXMCK
O2
C2
SBCK
SLRCK
DIR1PERR
AUDIO1
RX256FS
O1
C1
MCLK1
PCM9211_INTO
4K7
4K7
DIR_RST
DIR_CLK
DIRARC
DIR_CE
DIRO2
DIRC2
DIRO1
D D
C2492
C2222
C2491
C2213
R2252
R2253
C2219
100N-K
C2493 U2203
10/16(MVG) PCM9211 36 35 34 33 32 31 30 29 28 27 26 25
RXIN7/ADIN0
24.576MHz(XS-3225)
RXIN6/ALRCKIO
VDDRX
RXIN4/ASCKIO
RXIN5/ABCKIO
DIRC1 37 24 DIR_DIN
RST
RXIN1
MDI/SDA
RXIN2
RXIN3
R2209 33
38 MDO/ADR0 23 R2208 3K3 DIR_DOUT
12P-G
C2211
39 XTI DVDD 22
3
37 : RXIN0
X2201
R2223
4
OPEN
R2224 40 XTO 38 : GNDRX DGND 21
820
15P-G
C2212
25 : MC/SCL SCKO 1 8
2
41 AGND 20 256FSDIR1
1
26 : MS/ADR1
27 : MODE 2 7
R2225 42 VCC BCK 19 64FSDIR1 C2224 100N-K U2207
C2220 68N-K-3216680 3 6
FSDIR1
43 18
DIR1
FILT LRCK
*FILTER COMPONENTS C2221 4N7-K-2012
C2225 100N-K SN74LVC244APWR
E 44 VCOM
13 : MPIO_B2
DOUT 17 4 5
R1704
DATADIR1 C2226 100N-K R1697
33*4(AR) 2A1 GND
E
9 10
AGNDAD 12 :: ERROR/INTO 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
20 19 18 17 16 15 14 13 12 11
VCOM 45 NPCM/INT1 14 : MPIO_B3 MPO1 16 33*4(AR)
1 8 R2271 100
1Y4 2Y1
46 VCCAD MPO0 15
DGND
CEC3.3V
OPEN
RXMCK
SLRCK
SBCK
CEC1.8V
AUDIO1
RXSPDIF
DA_POWER
DGND
DIR1PERR
860SPDIF
MCLK1
OPEN
OPEN
OPEN
OPEN
RX256fs
O2
CLK_SEL
C2
O1
C1
2 7
R2229 0 RX64FS 76 50 RX64FS.. 2A2 1A4
PCM9211_INT0
1 8
8
A/DIN_L.. 47 VINL 14
MPIO_C0
MPIO_A0
MPIO_B0
MPIO_C2
MPIO_C3
MPIO_A2
MPIO_A3
MPIO_C1
MPIO_A1
MPIO_B1
R2230 0 RXFS 3 6
RXFS.. R2272 100
2 7 77 49 1Y3 2Y2
7
A/DIN_R.. 48 VINR 13 4 5
C2217 3 6 RXI2S3 78 RXI2S3 48 RXI2S0.. 2A3 1A3
6
76 : RX64FS
100N-K-1608 C2218 100N-K-1608 77 : RXFS R2273 100
1 2 3 4 5 6 7 8 9 10 11 12 4 5 79 DGND 50 : RX64fs 47 DATADIR1 1Y2 2Y3
5
49 : RXfs
OPEN
OPEN
C2494 C2495 R1707 80 CEC3.3V 48 : RXI2SO DGND 46 2A4 1A2
4
10/16-MVG 10/16-MVG 10K*4(AR) 47 : DATADIR1
RXI2S2 R2274 100
81 RXI2S2 CEC3.3V 45 1Y1 2Y4
33
3
33
RXI2S1 82 FSDIR1 44 FSDIR1
6
RXI2S1 2OE 1A1
8
5
7
2
R2275 4K7
R2228
R2227
33*4(AR)
RXI2S0 83 RXI2S0 64FSDIR1 43 64FSDIR1 VCC 1OE
PCM9211_INTO R2286
4
R1705 2
3
R2235
1
1
R2264 33
ADV7850_INT2 84 ADV7850_INT2/MUTEFLAG 256FSDIR1 42
R1698 33*4(AR)
256FSDIR1
F 85 DV_POWER DIRARC 41 1 8
DIRARC C2238 1N-K-1608
Q2202
F
OPEN-1608
1 8 2 7 C2239 100N-K
DIR1PERR
TXMCK 86 TXMCK DIRRXSPDIF 40 DIRRXSPDIF RT1N141C
RX64FS..
R1680
RX256FS
RXI2S0..
0-1608
R2231
AUDIO1
33*4(AR) U2205
SLRCK
R2232
RXFS..
2 7 3 6
MCLK1
TX64FS 87 TX64FS DIR860SPDIF 39 DIR860SPDIF
SBCK
TXFS 3 6 5M80ZT100C5N 4 5
DIRO2
88 TXFS DIRO2 38
R1702 33*4(AR)
4 5 1 8
TXI2S3 R1690 89 TXI2S3 DIRO1 37 DIRO1
PLD
33*4(AR) 1 8 2 7
TXI2S2 90 TXI2S2 DIRC2 36 DIRC2
2 7 3 6
TXI2S1 91 TXI2S1 DIRC1 35 DIRC1
C2223 100N-K 3 6 4 5
TXI2S0 92 TXI2S0 DACFS 34 DACFS
C2227 OPEN 4 5
93 DGND DAC64FS 33 R1703 DAC64FS
33*4(AR)
94 CEC3.3V DGND 32
1 8
TXSPDIF 95 TXSPDIF 98 : DATAC(to DSP) CEC3.3V 31
99 : DATAS(to DSP) 27 : DACDATASB 2 7
G ARCSPDIF 96 ARCSPDIF
100 : DATASB(to DSP) 26 : DAC256FS DACDATAF 30 DACDATAAF G
3 6
DATAF 97 DATAF(to DSP) DACDATAC 29 DACDATAC
AUDIO PLD
DSP1INCSW/SW
4 5
DATAC 98 DACDATAS 28 DACDATAS
DSP1OUT64FS
DSP1OUTMCK
DSP1INSB/SL
DSP1IN_/SW
R2301 33
DSP1INF/FR
DSP1IN64FS
DSP1IN_/FR
DSP1OUTFS
DSP1INMCK
DSP1INS/C
DATAS 99 27 DACDATASB
PLDAERR.
T.P
DSP1INFS
CEC3.3V
CEC1.8V
R2248 33 R2245 33
JT_TMS
JT_TDO
JT_TCK
AP_CK
AP_DA
AP_CS
JT_TDI
DATASB 26 DAC256FS
DGND
DGND
DGND
100
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 C2234 100N-K N2201
1.0-16-7PB-2
C2228 100N-K
TCK
7
100N-K
DGND
OPEN
C2235
6
100N-K
33
33
33
33
33
33
33
C2236 R2269 33 TDO
33
JT_TDO/
5
6
8
5
7
C2237 100N-K R2270 33 JT_TCK CEC3.3V
4
H H
33*4(AR)
C2230 100N-K
4
TMS
2
3
R2244
R2240
R1696 1
R2246
R2249
R2242
R2247
R2241
JT_TMS
R2251
R2256
3
100N-K
C2231 JT_TDI TDI
2
C2232 100N-K
DGND
1
10K
10K
1K
DSP1INCSW/SW
DSP1OUT64FS
DSP1INSB/SL
DSP1OUTMCK
R2276
R2278
R2277
DSP1IN_/SW
DSP1IN_/FR
DSP1OUTFS
DSP1INF/FR
DSP1IN64FS
PLDAERR.
DSP1INMCK
DSP1INS/C
DSP1INFS
AP_CK
AP_DA
AP_CS
K2202 C2206
RCA-107C-BK 10N-K R2210
470
COAX2 2 E1
OPEN-1608
OPEN-1608
OTHER AVR 1
OTHER AVR OPEN C2215 4.7U-K-1608 DV_POWER
J C2216 100N-K J
DA3.3V
TO
150
150
R2212 OPEN U2204 DA1.1V
R2213 0 TC74VHCU04FT DGND D.SUPPLY
R2204
R2206
C2201
D2201
K2201
DA3.3V
TO 1E
RCA-107C-BK 1A VCC
9 10 11 12 13 14
1
COAX1 1Y 6A
10K
10K
10K
2
2
1 R2214 47K 2A 6Y
3
R2215 330K 2Y 5A
4
R2266
R2268
R2267
3A 5Y
5
C2207 R2211
OPEN-1608
3Y 4A
OPEN-1608
470
6
10N-K
AVR-X2000E2/E1C/K OPEN
GND 4Y
8
7
K
150
150
R2216 47K K
R2217 330K R2237 33 C1
C2202
D2202
R2205
R2207
R2238 33 C2
R2218 OPEN
R2219 OPEN
R2222 R2226
OPEN OPEN
U2201
BCR-802-M25
JT_TCK/AP_CK/DAC_CK
JT_TDI/AP_DA/DAC_DA
VCC 3 C2203 100N-K
L OPT1 GND 2
L
DAC_ETHER_MUTE
R2202 33
OUT 1 O1
AVR-X2000E2/E1C/K ONLY
AVR-X2000E2/E1C/K OPEN
DACDATAAF
DSP1INCSW/SW
DACDATASB
DACDATAC
OTHER AVR
DACDATAS
DAC256FS
DSP1OUT64FS
DAC_MUTE
DSP1INSB/SL
DAC64FS
DAC_RST
A/DIN_L..
OTHER AVR
A/DIN_R..
DSP1OUTMCK
DSP1INF/FR
U2202
DAC_MS
DSP1IN_/FR
DSP1IN_/SW
DSP1IN64FS
DSP1INMCK
DSP1OUTFS
DSP1INS/C
BCR-802-M25
DACFS
DA3.3V
DSP1INFS
DAGND
VCOM
DA+5V
PLDAERR.
DGND
VCC 3
DA3.3V
DATASB
R2221
DA1.1V
DGND
DATAF
DATAC
DATAS
C2204 100N-K
0
OPT2 GND 2
OUT 1
R2203 33 O2 TO DSP TO ADC TO DAC
E5
TO 5E E6 TO MAIN DAC E7
TO 6E TO 7E
M M
GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL SCHEMATIC DIAGRAMS (15/24)
HDMI UNIT (5/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
133
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TO DIR/PLD TO CPU
DSP
5E E8
TO 8E
TO E5
DSP1OUT64FS
DSP1INSB/SL
PLDAERR.
DSP1INS/C
DSP1INCSW/SW
DSP1OUTFS
DSP1IN_/SW
DATAC
DATAS
DSP1INF/FR
DSP1IN64FS
DATAF
DSP1OUTMCK
DSP1IN_/FR
DATASB
DA3.3V
DSP1INMCK
DSP_ROMRST
DSP_MISO
DSP_FLAG0
DSPI_CLK
DA1.1V
DSP_MOSI
DSP_ICS
DGND
DSP_RST
DSP1INFS
A A
B B
DSP1INCSW/SW
DSP1OUTMCK
DSP1INMCK
DATAC
DSP1OUT64FS
DSP1INSB/SL
DSP1INFS
DSP1INF/FR
DSP1OUTFS
C C
MP OPEN
DSP1A20
DSP1RD
DSP1WR
DSP1A14
DSP1A16
DSP1A19
DSP1CE1
DSP1A15
N2001 R2029 OPEN
1.0-16-10PB-2
33
33
TCK DTCK
0
0
10
4
2
2
3
3
1
1
GND
9
33*4(AR)6
33*4(AR)6
8
8
5
5
R2119 7
R2120 7
TDO DTDO
R2024
R2020
R2025
R2027
8
R2002 OPEN
VCC R2030 10K
7
D TMS DTMS
D
6
TRST DTRST
5
EMU0 DEMU0
4
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
R2003 10K
100N-K
100N-K
EMU1
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
10K
10K
10K
3
1N-K
1N-K
TDI DTDI
2
GND
OPEN-1608
1
C2040
C2046
C2060
C2024
C2042
C2048
C2034
C2043
C2030
C2045
C2054
C2050
C2066
C2026
R2026
C2036
C2063
C2022
C2032
C2038
R2023
C2059
C2065
C2033
C2053
C2027
C2041
R2019
C2061
C2031
33*4(AR)
6
8
5
7
R2101
R2028 10K
4
2
3
1
R2001
R2006 4K7 C2093 1N-K U2002 C2108 1N-K
132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 W9864G6JH-6
R2007 OPEN C2001 1N-K C2094 100N-K
AMI_RD
ADDR14
AMI_WR
VDD_INT
ADDR16
GND
ADDR15
ADDR20
E E
MS1
VDD_EXT
VDD_EXT
VDD_EXT
ADDR22
ADDR23
THD_M
WDT_CLKO
BOOT_CFG2
AMI_ACK
ADDR19
ADDR21
THD_P
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
C2002 100N-K R2031 33 C2095 1N-K
DAI_P04
VDD_THD
WDT_CLKIN
DAI_P08
DAI_P20
VDD_EXT
DAI_P14
DAI_P10
DAI_P16
DAI_P12
DAI_P18
DAI_P15
DATASB
DAI_P17
88
DAI_P11
133 VDD_INT VDD VSS
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
1
DSP_FLAG0 R2016 33 134 FLAG0 87 R2032 10K DSP1D0 DQ0 DQ15 DSP1D15
2
R2017 33 DAI_P09 R2033 33 C2096 100N-K
135 FLAG1 DAI_P05 86 DATAF VDDQ VSSQ
3
R2048 4K7 DAI_P06 C2088 100N-K C2097 1N-K
136 FLAG2 VDD_INT 85 DSP1D1 DQ1 DQ14 DSP1D14
4
R2008 C2089 100N-K
10K 137 MLBCLK VDD_EXT 84 DSP1D2 DQ2 DQ13 DSP1D13
5
R2049 4K7 138 FLAG3 NC 83 C2073 1N-K VSSQ VDDQ C2109 100N-K
6
139 MLBDAT NC 82 C2074 1N-K DSP1D3 DQ3 DQ12 DSP1D12 C2110 1N-K
7
140 MLBDO NC 81 DSP1D4 DQ4 DQ11 DSP1D11
8
C2003 1N-K
141 VDD_EXT NC 80 C2098 100N-K VDDQ VSSQ
27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
C2004 100N-K
C2005 1N-K 142 MLBSIG NC 79 C2075 1N-K C2099 1N-K DSP1D5 DQ5 DQ10 DSP1D10
C2006 100N-K 143 VDD_INT VDD_INT 78 C2076 100N-K DSP1D6 DQ6 DQ9 DSP1D9 C2111 1N-K
U2001
144 TRST R2034 OPEN C2112 100N-K
F DTRST ADSP21487KSWZ3B DAI_P02 77
R2039 10K DSP1IN_/FR
VSSQ VDDQ
C2113 1N-K
F
145 MLBSO DAI_P01 76 DSP1D7 DQ7 DQ8 DSP1D8
DEMU0 146 EMU DAI_P19 75 DSP1IN64FS C2100 100N-K VDD VSS
R2103 C2101 1N-K R2044 0
DSP1D0 147 DATA0 DAI_P13 74 DSP1INS/C DSP1DQM LDQM NC
10*4(AR) 4 5
R2035 33 R2046 0
DSP1D1 3 6 148 DATA1 DAI_P07 73 DATAS DSP1WE WE UDQM DSP1DQM
DSP1D2 149 DATA2 VDD_EXT 72 C2090 100N-K DSP1CAS CAS CLK DSP1SDCLK
2 7
DSP1D3 150 DATA3 NC 71 C2077 1N-K DSP1RAS RAS CKE DSP1SDCKE
1 8
DTDO 151 TDO WDTRSTO 70 DSP1CE0 CS A12 R2047 OPEN DSP1A12
C2007 1N-K 152 DATA4 NC 69 DSP1A17 BA0 A11 DSP1A11
R2104 C2078 100N-K
DSP1D4 4 5 C2008 100N-K 153 VDD_EXT VDD_INT 68 DSP1A18 BA1 A9 DSP1A9
10*4(AR) C2079 1N-K
DSP1D5 3 6 154 DATA5 NC 67 DSP1SDA10 A10/AP A8 DSP1A8
DSP1D6 C2017 100N-K 155 DATA6 NC 66 DSP1A0 A0 A7 DSP1A7
G DSP1D7
2
1
7
8 C2009 1N-K 156 VDD_INT VDD_INT 65 C2080 100N-K DSP1A1 A1 A6 DSP1A6 G
157 DATA7 NC 64 C2081 1N-K DSP1A2 A2 A5 DSP1A5
DTDI 158 TDI NC 63 DSP1A3 A3 A4 DSP1A4
DSP1SDCLK R2011 47 C2010 100N-K 159 SDCLK VDD_INT 62 C2082 100N-K C2102 100N-K VDD VSS
160 VDD_EXT NC 61 C2083 1N-K C2103 1N-K R2041 10K
R2105 C2011 1N-K
DSP1D8 161 DATA8 177 NC 60 C2104 1N-K R2042 OPEN
4 5
10*4(AR) U2003
DSP1D9 3 6 162 DATA9 NC 59 MX29LV160DBTI
DSP1D10 2 7 163 DATA10 NC 58
DSP1D11 VDD_EXT 57 C2091 100N-K DSP1A16 A15 A16 DSP1A17
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
1 8 164 TCK
1
165 DATA11 NC 56 C2084 1N-K DSP1A15 A14 BYTE
2
DTCK R2036 OPEN
R2106 166 DATA12 DAI_P03 55 DSP1IN_/SW DSP1A14 A13 VSS
3
DSP1D12 A12
H 10*4(AR) 4 5 167 DATA14 DPI_P14 54 DSP1A13 DQ15/A-1 DSP1A0 R2117 H
4
DSP1D14 3 6 C2018 100N-K R2116 4 5
10K*4(AR)
168 DATA13 DPI_P13 53 DSP1A12 A11 DQ7 DSP1D7
5
DSP1D13 2 7 10K*4(AR)3 6 1 8
C2012 1N-K 169 VDD_INT DPI_P12 52 DSP1A11 A10 DQ14
6
2 7 2 7
DSP1D15 1 8 170 DATA15 DPI_P11 51 DSP1A10 A9 DQ6 DSP1D6
7
1 8 3 6
DSP1WE R2107 171 SDWE DPI_P10 50 DSP1A9 A8 DQ13
8
33*4(AR)4 5 4 5
RESETOUT/R UNRST IN
DSP1RAS 172 SDRAS DPI_P09 49 C2085 1N-K DSP1A20 A19 DQ5 DSP1D5
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
3 6
C2086 100N-K R2115 4 5
C2105 1N-K R2043 10K
DSP1CAS 2 7 173 RESET VDD_INT 48 3 6 NC DQ12
10K*4(AR) C2106 1N-K C2114 1N-K
174 TMS DPI_P07 47 DSP1WR WE DQ4 DSP1D4
BOOT_CFG0
1 8 2 7
BOOT_CFG1
R2040 0 C2115 100N-K
CLK_CFG0
DPI_P04
175 SDCAS DPI_P08 46 RESET VCC
CLK_CFG1
DSP_ROMRST
VDD_EXT
VDD_EXT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
VDD_INT
DP1_P02
DP1_P03
DPI_P05
DP1_P01
1 8
ADDR10
ADDR12
ADDR18
ADDR13
ADDR17
ADDR11
VDD_INT VDD_EXT
ADDR4
ADDR0
SDCKE
ADDR6
ADDR9
ADDR2
ADDR8
ADDR3
ADDR5
ADDR7
ADDR1
C2013 100N-K C2092 100N-K
SDA10
CLKIN
DTMS 45 NC DQ11 R2118
XTAL
176
MSO
GND
C2107 100N-K
NC
NC
C2014 1N-K SDDQM DPI_P06 C2087 1N-K 1 8 10K*4(AR)
R2114 2 NC DQ3 DSP1D3 1 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 7
RY/BYDQ10
J C2015 1N-K R2012 10K*4(AR)3 6
A18 DQ2
2 7 J
4K7 DSP1A19 DSP1D2 3 6
4 5
R2013 OPEN DSP1A18 A17 DQ9 4 5
R2038 OPEN
R2004 1K R2014 4K7 DSP1A8 A7 DQ1 DSP1D1
R2015 4K7 R2037 4K7 DSP1A7 A6 DQ8
Q2002 DSP1A6 A5 DQ0 DSP1D0
OPEN 2 DSP1A5 A4 OE DSP1RD
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
4.7U-K-1608
OPEN-3216
OPEN-3216
3 DSP1A4 A3 VSS
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
100N-K
Q2001 1 1 DSP1A3 A2 CE DSP1CE1
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
OPEN 3
1N-K
33
DSP_RST DSP1A2 A1 A0 DSP1A1
2R2005 C2016
R2050
C2069
C2072
OPEN 1N-K R2045 10K
C2071
C2049
C2064
C2029
C2062
C2068
C2028
C2047
C2023
C2056
C2070
C2025
C2052
C2058
C2035
C2055
C2067
C2037
C2057
C2051
K K
33*4(AR)
33*4(AR)
33*4(AR)
33*4(AR)
33*4(AR)
4 5
R2113
R2109
R2108
R2110
R2112
R2111
10K*4(AR) 3 6
2 7
6
6
8
8
5
5
7
R2018 R2021 1M 1 8
10
47
4
4
2
2
3
3
1
X2001
21.875MHz(XS-3225)
R2022
DSP1SDCKE
DSP1SDA10
DSP1DQM
DSP1CE0
DSP1A10
DSP1A12
DSP1A18
DSP1A13
DSP1A17
DSP1A11
DSP1A4
DSP1A0
DSP1A6
DSP1A9
DSP1A2
DSP1A8
DSP1A3
DSP1A5
DSP1A7
DSP_MISO
DSP1A1
DSP_MOSI
DSPI_CLK
DSP_ICS
C2039 C2044
9P-D 9P-D
L R2009 OPEN L
R2010 OPEN
OPEN
OPEN
OPEN
C2020
C2019
C2021
M GND LINE POWER+ LINE POWER- LINE ANALOG AUDIO DIGITAL1 AUDIO TMDS SIGNAL VIDEO SIGNAL COMPONENT(Y) SIGNAL M
SCHEMATIC DIAGRAMS (16/24)
HDMI UNIT (6/13)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
134
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TO CPU
E9
FROM
DIR/PLD 6E
FROM
DM860A 8D
FROM
DIR/PLD 7E MAIN DAC
A A
DAC256FS
DAC_ETHER_MUTE
DAC64FS
DACDATAC
DM860_DAC_MUTE
DACDATASB
DACDATAS
DM860_MCLK
DACDATAAF
DM860_LRCK
DM860_DATA
DM860_BCLK
JT_TDI/AP_DA/DAC_DA
JT_TCK/AP_CK/DAC_CK
DACFS
A/DIN_L..
A/DIN_R..
VCOM
DGND
DA3.3V
DAC_RST
DAC_MUTE
DAC_MS
DA+5V
DAGND
TO 9E
ZERO1
TO E7
TO D8
TO E6
DA+5V
R2443 0-1608
R2431 R2485
OPEN-1608 OPEN-1608
C2462 R2486 C2481
R2408 0-1608 OPEN-1608 OPEN-1608 10/16-MVG
R2413 R2432
B C2433 OPEN-MVG 0-1608 OPEN-1608
2 B
A/DIN_R.. A/DIN_R. 1
10N-K-1608
470K-1608
R2497
C2483
A/DIN_L.. 4 3
C2452 U2405:A C2464
OPEN-1608 OPEN OPEN
10N-K-1608
470K-1608
G4
C2484
C2453 U2405:B
R2498
OPEN-1608 OPEN
R2414 R2433 8 5 A/DIN_R
C2434 OPEN-MVG 0-1608 OPEN-1608 C2482
A/DIN_L. 7 R2487 DAGND
OPEN-1608 10/16-MVG
R2409 0-1608 6 A/DIN_L
100N-K
100N-K
C2463
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
1N-K
OPEN-1608 DAGND
C R2434
OPEN-1608
R2488
OPEN-1608
C
C2444
C2404
C2440
C2409
C2424
C2442
C2402
C2443
C2430
C2445
C2429
C2436
C2439
C2422
C2428
C2432
C2407
C2425
C2435
C2427
C2441
C2410
C2416
C2419
C2413
C2431
C2415
R2444
0-1608 R2499 OPEN-1608
DACRTNGND
R2500 OPEN-1608
U2406:A DA-7V
R2416 C2454 R2454 NJM8080
TO 4G
15K-1608 (CH)1500P-J-1608 820-1608
FL+
R2453
3 4
1
[FL] R2489
100-1608
DAGND
DAFL
CBW160808U121T
820-1608
DA+5V
FL- 2 DAGND
(CH)330P-J-1608
D R2415 C2473 (CH)330P-J-1608 DAFR D
DAGND
You might also like
- 920525-002 Ovation Series Service Manual Rev ANo ratings yet920525-002 Ovation Series Service Manual Rev A56 pages
- Denon Heos HomeCinema (S516) Service ManualNo ratings yetDenon Heos HomeCinema (S516) Service Manual59 pages
- Samsung Hlr4266w Hlr5067wx Xaa Chassis l64cNo ratings yetSamsung Hlr4266w Hlr5067wx Xaa Chassis l64c129 pages
- Pioneer Pdp503cmx Plasma TV Training ManualNo ratings yetPioneer Pdp503cmx Plasma TV Training Manual159 pages
- toshiba_40l2546_40l2556_50l2546_50l2556No ratings yettoshiba_40l2546_40l2556_50l2546_50l255624 pages
- The IPhone 12 Pro Photography User Guide: Your Guide For Smartphone Photography For Taking Pictures Like A Pro Even As A BeginnerFrom EverandThe IPhone 12 Pro Photography User Guide: Your Guide For Smartphone Photography For Taking Pictures Like A Pro Even As A BeginnerNo ratings yet
- Techno India College of Technology: MembersNo ratings yetTechno India College of Technology: Members18 pages
- GESE G4 - Classroom Activity 1 - Choosing A TopicNo ratings yetGESE G4 - Classroom Activity 1 - Choosing A Topic5 pages
- Pacific Affairs, University of British Columbia Pacific AffairsNo ratings yetPacific Affairs, University of British Columbia Pacific Affairs4 pages
- Rotary Actuators Rr-36 Flange Output Series Base Unit: RR-36 See Next PageNo ratings yetRotary Actuators Rr-36 Flange Output Series Base Unit: RR-36 See Next Page2 pages
- Statistics For Management and Economics Ch.1 - PPTNo ratings yetStatistics For Management and Economics Ch.1 - PPT35 pages
- R.Manoharan, Department of Information Technology, Adhiparasakthi Engineering College, MelmaruvathurNo ratings yetR.Manoharan, Department of Information Technology, Adhiparasakthi Engineering College, Melmaruvathur4 pages
- FAC2601_Assessment1_20March2024 - Attempted on 16 March 2025No ratings yetFAC2601_Assessment1_20March2024 - Attempted on 16 March 202510 pages
- Module 2 Materials For Prestressed ConcreteNo ratings yetModule 2 Materials For Prestressed Concrete17 pages
- DMX-SPI-203 LED Controller: 2. Product DimensionNo ratings yetDMX-SPI-203 LED Controller: 2. Product Dimension3 pages
- Instructions To Authors: Cosiwn Journal and Itssa JournalNo ratings yetInstructions To Authors: Cosiwn Journal and Itssa Journal7 pages
