PRILOG 2

CFD simulacija ulazne račve

Za ulaznu račvu napravljena je hidraulička CFD simulacija strujenja vode u račvi. Predmet analize su
brzine, pritisci i turbulencija u ulaznoj račvi. Rezulati analize su priloženi u nastavku teksta.
 [Company logo here]

Fluid Flow Simulation Project

[company name here] [city, state here] [company url here] Report

[name] ∙ [title] ∙ ∙ [email address] ∙ (###) ###-####

SOLIDWORKS Flow Simulation

Project Report

August 22, 2017

[Model Picture here]

Learn more about SOLIDWORKS Flow Simulation

Fluid Flow Simulation Report

Table of Contents
1 General Information ................................................................................................................................1
1.1 Analysis Environment ..................................................................................................................1
1.2 Model Information.......................................................................................................................1
1.3 Project Comments:.......................................................................................................................1
1.4 Size of Computational Domain ...................................................................................................1
1.5 Simulation Parameters .................................................................................................................1
1.5.1 Mesh Settings ............................................................................................................................1
1.5.2 Material Settings........................................................................................................................2
1.5.3 Initial Conditions ......................................................................................................................2
1.5.4 Boundary Conditions ...............................................................................................................2
1.5.5 Volumetric Heat Sources .........................................................................................................3
1.5.6 Engineering Goals.....................................................................................................................3
1.6 Analysis Time ...............................................................................................................................3
2 Results ...................................................................................................................................................4
2.1 Analysis Goals...............................................................................................................................4
2.2 Global Min-Max-Table ...................................................................................................................4
2.3 Results ...........................................................................................................................................5
2.4 Conclusion ....................................................................................................................................5
3 Appendix ................................................................................................................................................6
3.1 Material Data ................................................................................................................................6

II
Fluid Flow Simulation Report

1 General Information
Objective of the simulation: Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut a pulvinar lacus. Vivamus
adipiscing adipiscing eleifend. Pellentesque eget ante in ante suscipit gravida in non lorem. Suspendisse hendrerit
sagittis lacus non aliquam. Proin pellentesque, lorem quis consequat porta, lectus nunc vestibulum lectus, nec rhoncus
libero dui ut felis. Vestibulum eu aliquet tellus. Curabitur suscipit ornare sem. Suspendisse pulvinar pharetra ultrices.
Suspendisse a quam massa

1.1 Analysis Environment

Software Product: Flow Simulation 2017 SP4.0. Build: 3864
CPU Type: Intel(R) Xeon(R) CPU E3-1535M v5 @ 2.90GHz
CPU Speed: 2904 MHz
RAM: 65356 MB / 134217727 MB
Operating System: Windows 10 (or higher) (Version 10.0.15063)

1.2 Model Information

Model Name: Sklop_racva_S2B_ver_2.SLDASM
Project Name: Project(1)

1.3 Project Comments:

Unit System: Custom Units
Analysis Type: Internal

1.4 Size of Computational Domain

Size
X min 0.190 m
X max 9.879 m
Y min 8.015 m
Y max 12.383 m
Z min 2.065 m
Z max 26.380 m

1.5 Simulation Parameters

1.5.1 Mesh Settings
1.5.1.1 Basic Mesh

Basic Mesh Dimensions

Number of cells in X 30
Number of cells in Y 14
Number of cells in Z 74

1
Fluid Flow Simulation Report
1.5.1.2 Analysis Mesh
Total Cell count: 45786
Fluid Cells: 45786
Solid Cells: 88305
Partial Cells: 29150
Trimmed Cells: 0

1.5.1.3 Additional Physical Calculation Options

Heat Transfer Analysis: Heat conduction in solids: Off
Flow Type: Laminar and turbulent
Time-Dependent Analysis: Off
Gravity: Off
Radiation:
Humidity:
Default Wall Roughness: 0 micrometer

1.5.2 Material Settings

Material Settings
Fluids
Water

1.5.3 Initial Conditions

Initial Conditions
Thermodynamic parameters Static Pressure: 101325.00 Pa
Temperature: 293.20 K
Velocity parameters Velocity vector
Velocity in X direction: 0 m/s
Velocity in Y direction: 0 m/s
Velocity in Z direction: 0 m/s
Turbulence parameters

1.5.4 Boundary Conditions

Boundary Conditions
Total Pressure 1
Type Total pressure
Faces Face<3>@LID69-1
Coordinate system Face Coordinate System
Reference axis X
Thermodynamic parameters Total Pressure: 791963.25 Pa
Temperature: 293.20 K
Turbulence parameters Boundary layer parameters
Boundary layer type: Turbulent

Outlet Volume Flow 1

2
Fluid Flow Simulation Report
Type Outlet Volume Flow
Faces Face<1>@LID30-1
Coordinate system Face Coordinate System
Reference axis X
Flow parameters Flow vectors direction: Normal to face
Volume flow rate: 1.6000 m^3/s

Outlet Volume Flow 2

Type Outlet Volume Flow
Faces Face<2>@LID98-1
Coordinate system Face Coordinate System
Reference axis X
Flow parameters Flow vectors direction: Normal to face
Volume flow rate: 3.2000 m^3/s

1.5.5 Volumetric Heat Sources

1.5.6 Engineering Goals

1.6 Analysis Time

Calculation Time: 101 s
Number of Iterations: 95
Warnings:

3
Fluid Flow Simulation Report

2 Results
2.1 Analysis Goals

Goals
Name Unit Value Progress Criteria Delta Use in
convergence

2.2 Global Min-Max-Table

Min/Max Table
Name Minimum Maximum
Density (Fluid) [kg/m^3] 997.56 997.56
Pressure [Pa] 765305.54 796495.97
Temperature [K] 293.20 293.21
Temperature (Fluid) [K] 293.20 293.21
Velocity [m/s] 0 5.354
Velocity (X) [m/s] -2.730 3.309
Velocity (Y) [m/s] -1.669 3.724
Velocity (Z) [m/s] -5.106 3.416
Axial Velocity [m/s] -5.106 3.416
Circumferential Velocity [m/s] -3.184 3.140
Lambda2-Criterion [1/s^2] -213389.09 51509.13
Radial Velocity [m/s] -2.338 3.853
Velocity RRF [m/s] 0 5.354
Velocity RRF (X) [m/s] -2.730 3.309
Velocity RRF (Y) [m/s] -1.669 3.724
Velocity RRF (Z) [m/s] -5.106 3.416
Vorticity [1/s] 0 953.25
Vorticity (X) [1/s] -820.09 179.86
Vorticity (Y) [1/s] -292.69 570.22
Vorticity (Z) [1/s] -720.86 730.76
Relative Pressure [Pa] 663980.54 695170.97
Shear Stress [Pa] 0 201.22
Bottleneck Number [ ] 0 1.0000000
Heat Transfer Coefficient 0 0
[W/m^2/K]
ShortCut Number [ ] 0 1.0000000
Surface Heat Flux [W/m^2] 0 0
Surface Heat Flux (Convective) -5.358e+009 3.396e+009
[W/m^2]
Turbulence Intensity [%] 0.01 1000.00
Turbulence Length [m] 5.957e-006 0.052
Turbulent Dissipation [W/kg] 1.66e-030 185.77
Turbulent Energy [J/kg] 3.016e-021 0.692
Turbulent Time [s] 0.004 1.813e+009

4
Fluid Flow Simulation Report
Turbulent Viscosity [Pa*s] 8.1379e-019 12.9135
Acoustic Power [W/m^3] 6.174e-095 5.492e-012
Acoustic Power Level [dB] 0 7.40

2.3 Results

2.4 Conclusion

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut a pulvinar lacus. Vivamus adipiscing adipiscing eleifend.
Pellentesque eget ante in ante suscipit gravida in non lorem. Suspendisse hendrerit sagittis lacus non aliquam. Proin
pellentesque, lorem quis consequat porta, lectus nunc vestibulum lectus, nec rhoncus libero dui ut felis. Vestibulum eu
aliquet tellus. Curabitur suscipit ornare sem. Suspendisse pulvinar pharetra ultrices. Suspendisse a quam massa

5
Fluid Flow Simulation Report

3 Appendix
3.1 Material Data

Engineering Database
Liquids
Water
Path: Liquids Pre-Defined
Density
Density[kg/m^3]

Temperature[K]

Dynamic viscosity
Dynamic viscosity[Pa*s]

Temperature[K]

6
Fluid Flow Simulation Report
Specific heat (Cp)
Specific heat (Cp)[J/(kg*K)]

Temperature[K]

Thermal conductivity
Thermal conductivity[W/(m*K)]

Temperature[K]

Cavitation effect: Yes

Temperature: 0 K
Saturation pressure: 0 Pa

7
Fluid Flow Simulation Report
Radiation properties: No

8
Fluid Flow Simulation Report