Krima

Dispersing
system

C E L L W O O D
M A C H I N E R Y
Krima Dispersing System
The most effective system for dispersing of waste paper

• KRIMA Dispersing systems are used in stock • The combination of Performance, Economy and
preparation systems for recycled paper, with the Flexibility will ensure maximum return on invest-
main target, to reduce the impurities to an invisible ment.
size. • Customized systems meeting customer require-
• KRIMA Dispersion develops the properties of the ments with flexible modules of Dewatering, Heat-
fibers. ing and Dispersion.
• KRIMA Dispersing system gives optimum treat- • Global presence with approximately 500 KRIMA
ment of all types of pulp mixtures in which waste Dispersing systems installed, treating more than
paper is the basic raw material. 100 000 tons of pulp every day.
• KRIMA hot dispersing systems are pressurized • Unique and highly developed competence after
and operate at up to +120°C (248°F). 40 years of experience.
• Exceptionally low energy consumption, less than • A complete dispersing system comprises three
60 kWh/ton (3 hpd/ton), for a complete system. process stages namely: Dewatering, Heating and
• The system can be used as a highly efficient in- Dispersion.
line bleaching stage.

Dewatering zone

• One stage Screwpress dewatering thickens the optimum dispersion result.

pulp from as low as 3 % to over 30 % consistency. • Atmospheric discharge from the screw press al-
• High consistency is crucial for a fast and eco- lows for easy sampling and flexible installation.
nomic heating in the Heating zone and to achieve
Heating zone

• The heating zone with its closed pressurized that all fibres and contaminants reach the required
design is sealed by a Plugscrew to achieve low temperature needed for dispersion.
steam consumption and flexible operating tem- • A sealed heating zone makes it possible to con-
peratures of up to +120°C (248°F). nect different dewatering systems.
• Shear forces introduced by the plug screw creates • The heating zone can be used as a bleaching re-
a pre-dispersing effect. actor due to high temperature or only as a chemi-
• A Shredder finely divides the pulp plug to enable cal mixer.
an effective and uniform heating. This will ensure

Dispersion zone

• KRIMA Disperser is a disc type Disperser for su- • Dispersing discs are available in different “devil-
perior performance and easy maintenance. tooth” patterns to give the best optimum result.
• Unique design guarantees gentle treatment of the • Adjustment of the disc gap on-line with an accu-
fibres at high consistency. racy of 0.01 mm.
• Energy consumption is as low as 35 kWh/ton • Flexible discharge consistency from 3 – 35 %.
(1,75 hpd/ton).
 Krima Dispersing System
Designed to disperse impurities such as: Cellwood have supplied the system to a
• Wax large range of products like:
• Hot-melts Linerboard,
Inlet
• Bitumen Corrugated medium,
• Stickies Board, Tissue,
• Ink Newsprint and
• Colours and Wet Fine paper.
strength paper

After
disperser
and IN-LINE After

bleaching disperser

KRIMA DISPERSING SYSTEM principal flowsheet

with alternative discharges

Inlet Consistency 3 % Inlet Consistency 3 %

SCREW PRESS SCREW PRESS

Consistency 30 - 35 %
Consistency 30 - 35 %
Filtrate Filtrate
PLUG SCREW PLUG SCREW

Shredder PRE HEATER Shredder PRE HEATER

Outlet Consistency
3 - 15 %

Disperser Disperser

Steam Steam
INFEEDER INFEEDER
Dilution
water Outlet
Consistency
25 - 35 %
DISHARGE
PLUG SCREW

Alternative 1 Alternative 2
Krima Dispersing system with a screw press of min 3 % Krima Dispersing system with a screw press of min 3 %
inlet consistency, heating zone and with low/medium dis- inlet consistency, heating zone and with high discharge
charge consistency from disperser. consistency from disperser.

C E L L W O O D M A C H I N E R Y
 KRIMA DISPERSING SYSTEM a
result of 40 YEARS´ experience and
continuous development

Krima Dispersing system of 500 tpd.

Key experiences from using the

KRIMA Dispersing system
• Improved end product quality.
• Ability to use a wider selection
of raw material.
• Increase of yield.
• Low energy consumption.
• Develope fibre properties.
• Decreased need for refining.
• Inline bleaching with lower chemical
consumption.
• Reduction of bacterial spores.
• Improved runability on PM.
 CELLWOOD MACHINERY
World Leader of Dispersing & Pulping Technology

Cellwood Machinery AB develops, manufactures and supplies machinery and

systems for the pulp and paper industry. Our aim is constant development,
leading to cost-effective machinery and energy savings for our customers.
Cellwood Machinery always provides an operational guarantee and under-
takes everything from engineering and drawing documentation to complete
installations.

Cellwood Machinery is a world leader in pulper design and dispersing systems.

We are represented in all countries by our own personnel or agents. For further
information, visit our website www.cellwood.se.

Cellwood Machinery is part of the Swedish family-owned industrial group The

Cellwood Group, which has around 350 employees.

KRIMA DISPERGERINGSSYTEM. REV.2 (ENG) 2011-05 Conspectus ab.

Cellwood Machinery AB • Box 65 • SE-571 21 NÄSSJÖ • SWEDEN • Phone +46 380-760 00 • Fax +46 380-141 23
Street address • Storgatan 53 • SE-571 32 NÄSSJÖ • SWEDEN • E-mail [email protected] • www.cellwood.se

— a member of the Cellwood Group —