Scribd
Upload
5 views

#SWITCH-SERVER#

The document details the configuration of VLANs and VTP settings on a network switch. VLANs 10, 20, 30, and 40 are created with specific names, and the VTP domain is set to 'licence3.sn' with a password. Additionally, trunking is enabled on specific interfaces, and the status of VLANs is displayed, showing their active status and associated ports.

Uploaded by

YOUSSOUF RAIDOU-DINE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
5 views

#SWITCH-SERVER#

The document details the configuration of VLANs and VTP settings on a network switch. VLANs 10, 20, 30, and 40 are created with specific names, and the VTP domain is set to 'licence3.sn' with a password. Additionally, trunking is enabled on specific interfaces, and the status of VLANs is displayed, showing their active status and associated ports.

Uploaded by

YOUSSOUF RAIDOU-DINE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

#SWITCH-SERVER#

up
SWITCH-SERVEUR#vlan database
SWITCH-SERVEUR(vlan)#vlan 10
VLAN 10 added:
Name: VLAN0010
SWITCH-SERVEUR(vlan)#vlan 20
VLAN 20 added:
Name: VLAN0020
SWITCH-SERVEUR(vlan)#vlan 30
VLAN 30 added:
Name: VLAN0030
SWITCH-SERVEUR(vlan)#apply
APPLY completed.
SWITCH-SERVEUR(vlan)#
SWITCH-SERVEUR(vlan)#bort
^
% Invalid input detected at '^' marker.

SWITCH-SERVEUR(vlan)#abort
Aborting....
SWITCH-SERVEUR#vtp server
^
% Invalid input detected at '^' marker.

SWITCH-SERVEUR#vtp
SWITCH-SERVEUR#vtp ?
% Unrecognized command
SWITCH-SERVEUR#vlan database
SWITCH-SERVEUR(vlan)#vtp
SWITCH-SERVEUR(vlan)#vtp serveur
^
% Invalid input detected at '^' marker.

SWITCH-SERVEUR(vlan)#vtp server
Device mode already VTP SERVER.
SWITCH-SERVEUR(vlan)#vtp domain licence3.sn
Changing VTP domain name from NULL to licence3.sn
SWITCH-SERVEUR(vlan)#vtp password passer123
Setting device VLAN database password to passer123.
SWITCH-SERVEUR(vlan)#abort
Aborting....
SWITCH-SERVEUR#conf t
Enter configuration commands, one per line. End with CN TL/Z.
SWITCH-SERVEUR(config)#int f1/0
SWITCH-SERVEUR(config-if)#switchport mode trunk
SWITCH-SERVEUR(config-if)#
SWITCH-SERVEUR(config-if)#
*Mar 1 00:04:23.223: %DTP-5-TRUNKPORTON: Port Fa1/0 has
become dot1q trunk
SWITCH-SERVEUR(config-if)#int f1/1
SWITCH-SERVEUR(config-if)#switchport mode trunk
SWITCH-SERVEUR(config-if)#
*Mar 1 00:04:33.303: %DTP-5-TRUNKPORTON: Port Fa1/1 has
become dot1q trunk
SWITCH-SERVEUR(config-if)#exit
SWITCH-SERVEUR(config)#exit
SWITCH-SERVEUR#
SWITCH-SERVEUR#
SWITCH-SERVEUR#
*Mar 1 00:12:50.255: %SYS-5-CONFIG_I: Configured from console by console
SWITCH-SERVEUR#vlan database
SWITCH-SERVEUR(vlan)#vlan 40 50
^
% Invalid input detected at '^' marker.

SWITCH-SERVEUR(vlan)#vlan 40
VLAN 40 added:
Name: VLAN0040
SWITCH-SERVEUR(vlan)#apply
APPLY completed.
SWITCH-SERVEUR(vlan)#abord

#################################################

#SWITCH-CLIENT#
SWITCH-CLIENT1#

SWITCH-CLIENT1#vlan database
SWITCH-CLIENT1(vlan)#vtp client
Setting device to VTP CLIENT mode.
SWITCH-CLIENT1(vlan)#vtp domain licence3.sn
Changing VTP domain name from NULL to licence3.sn
SWITCH-CLIENT1(vlan)#vtp password passer
SWITCH-CLIENT1(vlan)#vtp password passer123
Setting device VLAN database password to passer123.
SWITCH-CLIENT1(vlan)#
SWITCH-CLIENT1(vlan)#abort
Aborting....
SWITCH-CLIENT1#conf t
Enter configuration commands, one per line. End with CN TL/Z.
SWITCH-CLIENT1(config)#int f1/0
SWITCH-CLIENT1(config-if)#switchport mode trunk
SWITCH-CLIENT1(config-if)#
*Mar 1 00:11:07.575: %DTP-5-TRUNKPORTON: Port Fa1/0 has
become dot1q trunk
*Mar 1 00:11:08.059: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Vlan1, changed state to down
SWITCH-CLIENT1(config-if)#
SWITCH-CLIENT1(config-if)#do show vlan-switch

VLAN Name Status Ports


---- -------------------------------- --------- --------
-----------------------
1 default active Fa1/1, F a1/2,
Fa1/3, Fa1/4
Fa1/5, F a1/6,
Fa1/7, Fa1/8
Fa1/9, F a1/10,
Fa1/11, Fa1/12
Fa1/13,
Fa1/14, Fa1/15
10 VLAN0010 active
20 VLAN0020 active
30 VLAN0030 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp


BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ----
-------- ------ ------
1 enet 100001 1500 - - - - -
1002 1003
10 enet 100010 1500 - - - - -
0 0
20 enet 100020 1500 - - - - -
0 0
30 enet 100030 1500 - - - - -
0 0
1002 fddi 101002 1500 - 0 - - -
1 1003
1003 tr 101003 1500 1005 0 - - srb
1 1002

SWITCH-CLIENT1(config-if)#
*Mar 1 00:11:38.107: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Vlan1, changed state to up
SWITCH-CLIENT1(config-if)#do show vlan-switch

VLAN Name Status Ports


---- -------------------------------- --------- --------
-----------------------
1 default active Fa1/1, F a1/2,
Fa1/3, Fa1/4
Fa1/5, F a1/6,
Fa1/7, Fa1/8
Fa1/9, F a1/10,
Fa1/11, Fa1/12
Fa1/13,
Fa1/14, Fa1/15
10 VLAN0010 active
20 VLAN0020 active
30 VLAN0030 active
40 VLAN0040 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp


BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ----
-------- ------ ------
1 enet 100001 1500 - - - - -
1002 1003
10 enet 100010 1500 - - - - -
0 0
20 enet 100020 1500 - - - - -
0 0
30 enet 100030 1500 - - - - -
0 0
40 enet 100040 1500 - - - - -
0 0
--More--

#################################################

#SWITCH-CLIENT 2#

SWITCH-CLIENT#vlan database
SWITCH-CLIENT(vlan)#vtp client
Setting device to VTP CLIENT mode.
SWITCH-CLIENT(vlan)#vtp domain licence3.sn
Changing VTP domain name from NULL to licence3.sn
SWITCH-CLIENT(vlan)#vtp password passer123
Setting device VLAN database password to passer123.
SWITCH-CLIENT(vlan)#abort
Aborting....
SWITCH-CLIENT#conf t
Enter configuration commands, one per line. End with C NTL/Z.
SWITCH-CLIENT(config)#int f1/1
SWITCH-CLIENT(config-if)#switc
SWITCH-CLIENT(config-if)#switchport mode trunk
SWITCH-CLIENT(config-if)#
*Mar 1 00:07:19.271: %DTP-5-TRUNKPORTON: Port Fa1/1 ha s
become dot1q trunk
*Mar 1 00:07:19.755: %LINEPROTO-5-UPDOWN: Line protoco l on
Interface Vlan1, changed state to down
SWITCH-CLIENT(config-if)#
SWITCH-CLIENT(config-if)#do show i
*Mar 1 00:07:49.847: %LINEPROTO-5-UPDOWN: Line protoco l on
Interface Vlan1, changed state to up
SWITCH-CLIENT(config-if)#do show interfaces f1/1 switch port
Name: Fa1/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1,10,20,30
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: none
Appliance trust: none
SWITCH-CLIENT(config-if)#do show vlan-switch
VLAN Name Status Ports
---- -------------------------------- --------- -------
------------------------
1 default active Fa1/0, Fa1/2,
Fa1/3, Fa1/4
Fa1/5, Fa1/6,
Fa1/7, Fa1/8
Fa1/9, Fa1/10,
Fa1/11, Fa1/12
Fa1/13,
Fa1/14, Fa1/15
10 VLAN0010 active
20 VLAN0020 active
30 VLAN0030 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp


BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ----
-------- ------ ------
1 enet 100001 1500 - - - - -
1002 1003
10 enet 100010 1500 - - - - -
0 0
20 enet 100020 1500 - - - - -
0 0
30 enet 100030 1500 - - - - -
0 0
1002 fddi 101002 1500 - 0 - - -
1 1003
1003 tr 101003 1500 1005 0 - - srb
1 1002

SWITCH-CLIENT(config-if)#

You might also like