TS10S Product Manual

Hello，TS10S ！
Directory
CONTENTS

2
01. Main interface Back button
Home button
Power button: short press History：Click View recently used apps to
mute, long press to shut choose whether to split the screen
down, tap power on again
Click this box
area to quickly
Home button:
enter the
Click to return to
corresponding
the main interface
navigation
Back button: Click to application
go back to the interface
previous level
Volume keys: Tap
to adjust the Quick
volume up and application:
down, and long Click to enter
press to adjust the application
continuously interface, long
press to edit
Time and weather: Click to enter
the corresponding adjustment Media plug-in: Click to enter the
interface corresponding media interface

3
 DSP：Click to enter the
02.Drop-down menu Bluetooth：Click sound effect
to quickly enter adjustment interface
WIFI：Click the Internet to pop up the
quick connection interface at the bottom, the Bluetooth Levitation：Click to turn
interface on the hoverball feature
and long press to enter the
corresponding setting interface Car setting：Click to
enter the on-board
Time weather display setup interface
area Take a screenshot：
Click to capture the
current interface and
Brightness volume:
save it to the file
Swipe up or down to
manager
adjust brightness and
volume Clean up memory：
Tap to close all
running apps

Car setting – display, Reboot：Click Screensaver：Click Turn

selectable effect of drop-down Restart Vehicle on screensavers
menu background (matte, Menu：Click to appear the pop-
Move data：Long
gradient)）
press to enter the up box, containing the theme,
SIM card setting management application, system
interface settings

4
03.Theme Click to select the content you are interested in,
and save the changes when you are done
Click to enter the image below to
enter my theme interface

settings：Click
to go to the app
settings page

Click on a selected
theme to switch toggles

Redeem button：Open a membership or enter a

redemption code to get the corresponding theme
Theme
retrieval

5
04. Settings No sleep：After the car is turned off, the power is cut
Select the off normally, and the vehicle equipment will not start
navigation quickly
Wi-Fi, mobile network, app you want Sleep for a day：The car is dormant within 24 hours
more network settings to use after turning off, can start quickly, and the power is
normally cut off after 24 hours
Brightness, fonts,
backgrounds,
wallpapers, etc
Sound settings, mix Voice button wake-
settings up software, voice
software selection
Display settings such as
outside temperature, air
conditioning, and doors
Including account, language
selection, input method settings,
mobile phone connection
application selection MCU upgrades, system upgrades,
developer options, factory reset,
Contains general and more Factory password：8888
information, Includes apps, storage, volume,
hardware information, display, privacy, security, and more
storage information,
system information

6
05. Setting Pip Setting Pip main interface As shown in the figure below, you can
choose the traditional main interface and the one-screen three-
display interface according to personal preferences, and you can
set whether the one-screen three-display function is turned on in
The traditional main the factory
interface is shown below

Setting Pip
display area

Window features：Long press to edit, present the picture on

the left, you can adjust the content displayed in the upper
1 2 3 4 display area, here No. 1 and No. 4 are optional for third-party
applications, to change to other third-party applications, you
can go to Set General Desktop Window Function Settings,
long press the application icon that needs to be changed to
change, such as the picture on the right

7
06. Bluetooth
Bluetooth connection procedure：Turn on the phone's Bluetooth - click the pairing button below -
search button - select the name of the paired device (as shown in the figure below Wqy's Phone) - the
phone pops up the PIN code box, enter the PIN code - 66 appears behind the device name to prove that the
connection is successful
Pair records

Search

Disconnect

Delete the
pairing record
Before Bluetooth is
not successfully
paired, you can only
use the pairing and
setting functions at
Dial pad Call logs Contacts Bluetooth Pairing Setting
music the bottom of the
left figure

8
07. Music
Playlist page Playback mode selection includes
As shown in the figure below, the left
side corresponds to playlist, USB, SD
single track loop, list loop, shuffle
card, local music, and my likes

Spectrum or
lyrics display
area

My Collection Playlist Previous paused Next DSP Lyrics

song song settings

9
08. Video Float video as shown below, the upper right
corner buttons of the float video correspond
to shrinking, enlarging and closing the window
respectively, and you can drag it by holding
down any position of the float video

Playlist, blue for

the currently
playing content

Playlist Full Previous paused Next DSP Setting（Float video,

screen episode episode Brake settings）
mode

10
09. Radio

Frequency Frequency
tuning dec tuning inc

Swipe left in this

area to page
through saved
stations（P1-P18） Settings:
Channel
Search for a channel selection
(stereo/mono)
DSP
Cut off a radio
BAND switches between AM (medium wave) radio mode and
FM (frequency modulation) mode, which defaults to FM
Cut on a radio station
Switching search stations between near and far

11
10. DSP
Surround sound Bass Boost

EQ

Six surround position modes, Adjust the bass effect at

set different positions, the different frequencies from
focus of the surround effect 0-12 (levels)
is different Zone Bass Filter

Eight sound effect types offer choice +

customization. Compensate and modify
The volume can be adjusted in various sound sources, sound fields, or The default is off, the range is
different areas of the car. Move speaker effects by adjusting electrical signals 0-250Hz, the more
the orange dot to adjust the of different frequencies frequencies, the greater the
volume and bass gain for the bass filtering. Adjustable
seating area you want to correct front/rear horn effect
12
11. AUX

Access signal to display video screen

PS:
The right view of
the original car is
connected to the
AUX channel

When there is no video

input, the interface displays:
No video signal, as shown
in the figure below

13
12. APK Installer

Installation example:

1.Connect the USB

APK Installer is an flash drive
APP dedicated to containing the
app installation, installed application
supporting to the car machine
multiple device 2.Open (APK Installer)
types of
operation, USB, 3.Directory selection
SD card, etc (USB0/USB1/USB2)
to switch USB ports

4.Find the app and

click Install

14
13. File manager
File management procedure:
File location
1. Check the files you want to
manage
2. The management options Check here to
pop up at the bottom as shown
quickly select
below
3. If you perform a copy or cut, all the files
you can perform the paste below
operation in another folder
4. When any file is not checked,
click + New File or Folder at
the bottom right

Management options include:

Properties, Copy, Cut, Delete

15
14. Steering wheel
When you need to clear
Learn the steps： your learning history, tap
[Start] first and then [Reset]
1. Click Start
2. Select the keys you
want to learn, such as
"Volume +"
3. Press the physical When learning,
button corresponding to you can choose
the steering wheel, and between high
the button will be and low
highlighted in blue after impedance
learning
according to
4. Click [End]
your needs

16
15. DoFun Play
App settings include checking for updates,
Ranked by downloads, ranked deleting installation packages after
by newest, the list is updated installation, cleaning cache, feedback, and
daily more

According to the You can download common apps

importance of the
APP, it is divided into
After the
important updates
and those that need downloaded APP,
to be updated it will be displayed
to open, and after
the application has
not been
downloaded, it will
prompt you to
download

17
16. Boot Animation
Boot animation operation
steps:
Ps: The format
1. Insert a USB flash drive of the
(stored in the root directory) imported
that copies the MP4 format startup
animation, and click the animation
boot animation application
2. Pull down the status bar,
includes MP4
click the menu, and the and zip. The
page pop-up box "Import startup
from external storage", as animation will
shown below play sound and
3. After clicking "OK", enter video along
the password Topway, and with the
the prepared MP4 format imported
animation will be read and
appear in the list below
animation, and
4. Finally, click the selected the playback
boot animation, click OK, time is ten
and the boot animation seconds
setting is completed

18
17. Mobile phone connection Wired Android Auto
connection steps：
Tlink5 supports wireless carplay + 1.Open TLink5
Wireless Carplay wireless/wired Androidauto 2.Use USB cable to
connection steps： connect mobile phone
and car machine
1.Make sure that the 3.TLink5 will
phone is connected automatically detect and
to Bluetooth connect
2.Open TLink5, the
car automatically
detects the Wireless Android Auto
connection and connection steps:
displays 1.Make sure that the
"Connecting" phone is connected to
3.Phone pop-up box Bluetooth
to confirm "Use 2.After the connection is
CarPlay Car" successful, the car
4.The connection is machine will display the
successfully application screen (at
presented on the this time, the mobile
right side phone WiFi will
automatically connect to
the car hotspot)

19
18. CarMate
"CarMate" is a new functional
product specially designed for The mobile APP
users to strengthen the needs to be
interconnection of mobile bound to the
phones and car machines. on-board device
Users can control the car before the
machine anytime, anywhere corresponding
through the mobile phone to service
improve the service functions can
experience, and strengthen be used.
the car anti-theft through
fence warning
Bind operation:
Currently available functions
include: remote operation of 1.Mobile phone
the recorder to take pictures, CarMate - scan
fence warning, view historical the code
travel tracks 2.Device QR
code (device QR
Mobile apps can be code)
downloaded through Google 3.The binding is
play and the apppstore. It can complete
also be downloaded via the
carMate
20
19. 360 Panorama（optional function）
1.Main interface 3D surrounding: the front view is
2.Front view: Switch back displayed in full screen, manual click can rotate the 3.Rear view: Switch back
and forth between original, viewing angle, when the car is powered on, the car and forth between original,
top, and correction views automatically switches to 360 panoramic mode top, and correction views

4.Left view models settings 5.Right view

photograph

6.Narrow channel
mode: You can switch
back and forth
between front narrow
lane view and full
narrow lane view
21
20. Dual screen with different displays Procedure:
（optional function） 1. Open Settings –
General – Video Output
Settings to turn on Video
Output
This 2. Connect the video
output box
function 3. Select the APP you
can achieve want to play the video
on the car machine，For
the effect of example, third-party app
different such as YouTube
4. When the car machine
displays of is synchronized with the
two screens video output display,
click the home button on
the car machine to
trigger the function of
different displays of the
two screens, and then
the car machine returns
to the home page, and
the video output will
continue to play

22