Huawei Embedded Power System

HUAWEI TECHNOLOGIES CO., LTD.

Contents
Embedded DC Power System
ETP4830-A1 ......................................................................... 01
ETP4890-A2 ......................................................................... 02
ETP48150-A3 ....................................................................... 03
ETP48200-C5A1 ................................................................... 04

Rectifier Module
R4815G1 .............................................................................. 05
R4815N1 .............................................................................. 06
R4830G1 .............................................................................. 07
R4830N2 .............................................................................. 08
R4830G2 .............................................................................. 09
R4850G2 .............................................................................. 10
R4850N2 .............................................................................. 11

Site Monitoring Unit

SMU01C ............................................................................... 12
SMU02B ............................................................................... 13
Embedded DC Power System
ETP4830-A1
Introduction Specifications
ETP4830-A1 can convert from 220V or dual-wire of 110V input to Product ETP4830-A1
stabilized -48V DC output. It can also be configured with 48V/15A
Dimension 442mm(W)×255mm(D)×43.6mm(1U,H)
rectifiers and provide 30A output. All the function units have standard
sized design with 1U. ETP4830-A1 can be embedded in 19-inch rack or Weight ≤8kg(fully loaded)

cabinet or other scenarios. The system can provide excellent performance Cooling mode Natural cooling
such as intelligent battery management, remote monitoring, etc. Installation mode Installed on 19-inch rack or cabinet
System
Cabling mode Front inlet and front outlet

Maintenance
Features mode
Front access, support module grade change

Protection level IP20

•• Wide range of AC input voltage from 85V to 300V
•• Wide operation temperature range of rectifier from -40ºC to 75ºC Input mode 220VAC single phase or 110VAC dual-live wire
AC
•• Online-swappable rectifier provides easy installation and maintenance Distribution Input frequency 45~66Hz, rated value: 50Hz/60Hz
•• Standard installation structure design, adapting to various scenarios SPD 5kA/10kA, 8/20μs
•• Compact design, saving space and installation cost
Output voltage 42~58VDC, rated value: 53.5VDC
•• High rectifier efficiency over 96% helps to save energy
•• Excellent rectifier dormancy function helps to increase system efficiency Maximum
DC 2kW
capacity
Distribution
•• Intelligent battery management and protection helps to prolong
Battery breakers 1×20A(fuse)
battery lifespan
•• Support environment monitoring and remote management through Load breakers 2×20A(fuse)
dry contact, serial interface or Ethernet interface Operating
-40ºC~+65ºC
temperature

Storage
-40ºC~+70ºC
temperature
Application Scenarios Environment
Operating
5%~95%(non-condensing)
humidity
•• Access network
0~4000m (If the altitude is within the range of 2000m to
•• Transmission network
Altitude 4000m, the maximum operating temperature decreases by
•• Communication network of enterprise 1ºC as the altitude increases by 200m.)

Rated power 870W(176~300VAC) 1000W(176~300VAC)

Input voltage 85VAC~300 VAC, rated 220VAC

Working -40ºC~+75ºC -40ºC~+75ºC

temperature (derated output above 65ºC) (derated output above 55ºC)

ETP4830-A1 Dimension 95.5mm(W)×208mm(D)×40.8mm(1U, H)

Rectifier
Weight ≤1.5kg ≤1.1kg

Cooling mode Forced cooling

Power factor ≥0.99

THD ≤5%
15A rectifier Monitor unit Type SMU01C
SMU01C
Signal input 2 digital input

Alarm output 4 dry contact

Controller
Communication
RS232/485
port

Display mode LCD

Remark: Optional rectifiers with power efficiency >92% are available for
this system.

1
Embedded DC Power System
ETP4890-A2
Introduction Specifications
ETP4890-A2 embedded DC power system can convert from AC input Product ETP4890-A2
to stabilized -48V DC output. It can be compatible with 15A and 30A
Dimension 442mm(W)×255mm(D)×86.1mm(2U,H)
rectifiers and provide 90A output with 2U in height. ETP4890-A2 can be
Weight ≤10kg(fully loaded)
embedded in 19-inch rack or cabinet or other scenarios. The system can
provide excellent performance such as intelligent battery management, Cooling mode Natural cooling

remote management, etc. System

Installation mode Installed on 19-inch rack or cabinet

Cabling mode Front inlet and front outlet

Maintenance
Front access, support module grade alteration
Features mode

Protection level IP20

•• Wide range of AC input voltage from 85V to 300V 220/380VAC 3-phase or 220VAC Single phase or 110VAC
Input mode
•• Wide operation temperature range of rectifier from -40ºC to 75ºC dual-live wire
AC
•• Online-swappable rectifier provides easy installation and maintenance Distribution Input frequency 45~66Hz, rated value: 50Hz/60Hz
•• Standard installation structure design, adapting to various scenarios SPD 5kA/10kA, 8/20μs
•• Compact design, saving space and installation cost
Output voltage 42~58VDC, rated value: 53.5VDC
•• High rectifier efficiency over 96% helps to save energy
Maximum
•• Excellent rectifier dormancy function helps to increase system efficiency DC capacity
4.8kW

•• Intelligent battery management and protection helps to prolong Distribution

Battery breakers 1×80A
battery lifespan
Load breakers 1×10A, 1×30A, 2×40A
•• Support environment monitoring and remote management through
dry contact, serial interface or Ethernet interface Operating
-40ºC~+65ºC
temperature

Storage
-40ºC~+70ºC
temperature
Application Scenarios Environment Operating
5%~95%(non-condensing)
humidity

•• Access network 0~4000m (If the altitude is within the range of 2000m to
•• Transmission network Altitude 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)
•• Communication network of enterprise
870W 1000W 1600W
Rated power
(176~300VAC) (176~300VAC) (176~300VAC)

Input voltage 85VAC~300 VAC, rated 220VAC

-40ºC~+75ºC -40ºC~+75ºC -40ºC~+75ºC

Working
(derated output (derated output (derated output
temperature
above 65ºC) above 55ºC) above 55ºC)
Rectifier
Dimension 95.5mm(W)×208mm(D)×40.8mm(H)
ETP4890-A2 Weight ≤1.5kg ≤1.1kg <1.6kg

Cooling mode Forced cooling

Power factor ≥0.99

THD ≤5%

Type SMU01C
15A rectifier 30A rectifier Monitoring unit
Signal input 2 digital input
SMU01C
Alarm output 4 dry contact
Controller
Communication
RS232/485
port

Display mode LCD

Remark: Optional rectifiers with power efficiency >92% are available for
this system.

2
Embedded DC Power System
ETP48150-A3
Introduction Specifications
ETP48150-A3 embedded DC power system can convert AC input to Product ETP48150-A3
stabilized -48V DC output. It can be compatible with 15A and 30A
Dimension 442mm(W)×255mm(D)×130.5mm (3U, H)
rectifiers. ETP48150 can be embedded in 19-inch rack or cabinet or other
Weight ≤20kg (fully loaded)
scenarios. The system can adapt wide range of AC input voltage and
provide excellent performance such as intelligent battery management, Cooling mode Natural cooling

remote management, etc. System

Installation mode Installed on 19-inch rack or cabinet

Cabling mode Front inlet and front outlet

Maintenance
Front access, support module grade alteration
Features mode

Protection level IP20

•• Wide range of AC input voltage from 85V to 300V 220/380VAC 3-phase or 220VAC single phase or 110V
Input mode
•• Wide operation temperature range of rectifier from -40ºC to 75ºC dual-live wire
AC
•• Online-swappable rectifier provides easy installation and maintenance Distribution Input frequency 45~66Hz, rated value: 50Hz/60Hz
•• Standard installation structure design, adapting to various scenarios SPD 5kA/10kA, 8/20μs
•• Compact design, saving space and installation cost
Output voltage 42~58VDC, rated value: 53.5VDC
•• High rectifier efficiency over 96% helps to save energy
Maximum
•• Excellent rectifier dormancy function helps to increase system efficiency DC capacity
8kW
•• Intelligent battery management and protection helps to prolong Distribution
Battery breakers 1x100A( HCB*)
battery lifespan
Load breakers 2x12A(HCB), 2x20A(HCB), 4x40A(HCB)
•• Support site environment monitoring and remote management
through dry contact, serial interface or Ethernet interface Operating
-40ºC~+70ºC
temperature

Storage
-40ºC~+70ºC
temperature
Application Scenarios Environment Operating
5%~95%(non-condensing)
humidity
•• Access network 0~4000m(If the altitude is within the range of 2000m to
•• Transmission network Altitude 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)
•• Communication network of enterprise
870W 1000W 1600W
Rated power
(176~300VAC) 176~300(VAC) (176~300VAC)

Input voltage 85VAC~300 VAC, rated 220VAC

-40ºC~+75ºC -40ºC~+75ºC -40ºC~+75ºC

Working
(derated output (derated output (derated output
temperature
above 65ºC) above 55ºC) above 55ºC)
Rectifier
Dimension 95.5mm(W)×208mm(D)×40.8mm(H)
ETP48150-A3
Weight ≤1.5kg ≤1.1kg ≤1.6kg

Cooling mode Forced cooling

Power factor ≥0.99

THD ≤5%

Type SMU01C
15A rectifier 30A rectifier Monitoring unit
Signal input 2 digital input
SMU01C
Alarm output 4 dry contact output
Controller
Communication
RS232/485
port

Display mode LCD

Remark: Optional rectifiers with power efficiency >92% are available for
this system.

3
Embedded DC Power System
ETP48200-C5A1
Introduction Specifications
ETP48200-C5A1 and ETP48200-C5A3 are AC/DC embedded power Product ETP48200-C5A1
system with excellent performance such as high power efficiency, Dimension 482.6mm(W)×330mm(D)×219.5mm(5U, H)
intelligent battery management, remote monitoring, wide range of AC
Weight ≤20kg (without rectifiers)
input voltage, etc. The system configures 50A of 1U height rectifier
Cooling mode Natural cooling
modules, and provides up to 200A output current. ETP48200-C5A1 and
Installation mode Installed on 19-inch rack, or embedded in cabinet
ETP48200-C5A3 can be embedded in 19-inch rack or cabinet. System
Cabling mode Front, top inlet and top outlet

Maintenance
Front maintenance, support module grade alteration
mode
Features Protection level IP20

Input mode 220/380VAC 3-phase or 220VAC Single phase

•• Wide range of AC input voltage from 85V to 300V
Input voltage 380VAC/220VAC
•• Wide operation temperature range of rectifier from -40ºC to 75ºC AC
Input capacity 1×63A/3P
•• Online-swappable rectifier provides easy installation and maintenance Distribution
Frequency 45~66Hz, rated value: 50Hz/60Hz
•• Standard installation structure design, adapting to various scenarios
SPD 30kA/60kA, 8/20μs
•• Compact design, saving space and installation cost
•• High rectifier efficiency over 96% helps to save energy Output voltage 42~58VDC, rated value: 53.5VDC

•• Excellent rectifier dormancy function helps to increase system efficiency Maximum

12kW
capacity
•• Intelligent battery management and protection helps to prolong DC
Battery breakers 2×125A/1P
battery lifespan Distribution
LLVD: 1×100A/1P, 1×63A/1P, 4×32A/1P
•• Support environment monitoring and remote management through Load breakers
BLVD: 2×10A/1P, 4×16A/1P
dry contact, serial interface or Ethernet interface
SPD 10kA/20kA, 8/20μs

Input voltage 85VAC~300VAC, rated value: 220VAC

Efficiency >96%
Application Scenarios Rated power 3000W(176~300VAC)

Working
•• Wireless base station temperature
-40ºC~+75ºC(derated output above 55ºC)
•• Transmission network Rectifier
Dimension 105mm(W)×281mm(D)×40.8mm(1U, H)
•• Communication network of enterprise
Weight ≤2kg

Cooling mode Forced cooling

Power factor ≥0.99

THD ≤5%

6 digital input, 1 door magnetism, 1 water logging,

Signal input 1 smoke, 2 temperature, 1 battery temperature, 1
environment temperature and humidity
ETP48200-C5A1
Controller Alarm output 8 dry contact output

Communication
RS232/485, FE
port

Display mode LCD

Operating
-40ºC~+65ºC
temperature
50A rectifier Monitor unit Storage
-40ºC~+70ºC
temperature
Environment Operating
5%~95%(non-condensing)
humidity

0~4000m (If the altitude is within the range of 2000m to

Altitude 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Remark: Optional rectifiers with power efficiency >92% are available for
this system.

4
Rectifier Module
R4815G1
Introduction Specifications
The R4815G1 is a digital rectifier that converts the 85~300VAC input to Product R4815G1
53.5 VDC output and possesses the characters of high efficiency, walk-in
Dimension 40.8(H)mm×95.5(W)mm×208(D)mm
start, hot-plug, complete protection, and no audible noise. The rectifier
Basic
adopts the latest power monitoring technology, implements the function Weight ≤1.5kg
specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling
output voltage of the rectifier can be adjusted through the host. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Frequency 45~66Hz, rated: 50Hz/60Hz

Features Input
feature Maximum input
≤6A
current
•• High efficiency: >96%
•• Input voltage range: 85~300VAC Power factor ≥0.99

•• Operating temperature range: -40~+75ºC THD ≤5%

•• Total harmonic distortion(THD): ≤5% Output voltage 42~58VDC, default value: 53.5VDC
Output
•• Hot-plug feature
Output power 870W(176~300VAC)
•• Digital control
•• Intelligent electric meter Operating
-40ºC~+75ºC
temperature
•• Communication over CAN
Storage
•• Adjustment of voltage and current temperature
-40ºC~+70ºC
Environmental
•• Meet RoHS requirements specifications
Relative humidity 5%~95%(non-condensing)
•• Passing the TUV, CE, CB, UL certifications
≤4000m(If the altitude is within the range of 3000m to
Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
70 Protection point: >300VAC
输出电压(V)

protection
60

50 Input undervoltage
Protection point: <80VAC
40 protection
30

20
Output
Protection overvoltage 58.5~60.5VDC(can be set by PMU)
10
protection
0
0 5 10 15 20
输出电流(A) Output short
A long term short circuit is allowed
Output feature circuit protection

Over-temperature
% Protection point: ≥75ºC(167ºF)
100 protection
96
Reliability MTBF >500,000hours
92

88
Audible
Specification ≤35db(25ºC, full load)
84 noises
80

76 Passes TUV, CE, UL certifications

72
Catch the CB certificate
0% 20% 40% 60% 80% 100% Complies with
负载率 Safety
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
1000
900 Safety/EMC/
800 EN55022 Class B
Lightening
700 EN55024
protection
600
EN61000-3-2
500
400
EMC EN61000-3-3
300 ETSI EN300 386
200 ETSI EN301489
100
ITU-T K.20
0
-40 50 55 65 75
温度(℃) Lightening
Power derating curve YD 5098-2005 5KA
protection

5
Rectifier Module
R4815N1
Introduction Specifications
The R4815N1 is a digital rectifier that converts the 85~300VAC input to Product R4815N1
53.5 VDC output and possesses the characters of high efficiency, walk-in
Dimension 40.8(H)mm×95.5(W)mm×208(D)mm
start, hot-plug, complete protection, and low audible noise. The rectifier
Basic
Weight ≤1.1kg
adopts the latest power monitoring technology, implements the function specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling
output voltage of the rectifier can be adjusted through the host. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Frequency 45~66Hz, rated: 50Hz/60Hz

Features Input
feature Maximum input
≤6.4A
current
•• High efficiency: >94%
Power factor ≥0.99
•• Input voltage range: 85~300VAC
•• Operating temperature range: -40~+75ºC THD ≤5%

•• Total harmonic distortion(THD): ≤5% Output

Output voltage 42~58VDC, default value: 53.5VDC
•• Hot-plug feature
Output power 1000W(176~300VAC)
•• Digital control
Operating
•• Intelligent electric meter -40ºC~+75ºC
temperature
•• Communication over CAN Storage
-40ºC~+70ºC
•• Adjustment of voltage and current Environmental
temperature
•• Meet RoHS requirements specifications
Relative humidity 5%~95%(non-condensing)
•• Passing the TUV, CE, CB, UL certifications
≤4000m(If the altitude is within the range of 3000m to
Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
protection
70
输出电压(V)

60
Input
50 undervoltage Protection point: <80VAC
40 protection
30
Output
20 Protection
overvoltage 58.5~60.5VDC(can be set by PMU)
10
protection
0
0 5 10 15 20 25
输出电流(A) Output short
A long term short circuit is allowed
Output feature circuit protection

Over-temperature
% Protection point: ≥75ºC(167ºF)
96 protection
94
92 Reliability MTBF >500,000hours
90
Audible
88
Specification ≤40db(25ºC, full load)
86 noises
84
82
Passes TUV, CE, UL certifications
80
Catch the CB certificate
0% 20% 40% 60% 80% 100% Complies with
负载率 Safety
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
1200
输出功率(W)

Safety/EMC/
1000 EN55022 Class B
Lightening
EN55024
800 protection
EN61000-3-2
600
EMC EN61000-3-3
400 ETSI EN300 386
200 ETSI EN301489
ITU-T K.20
0
-40 -20 0 20 40 60 80
温度(℃) Lightening
Power derating curve YD 5098-2005 5KA
protection

6
Rectifier Module
R4830G1
Introduction Specifications
The R4830G1 is a digital rectifier that converts the 85~300VAC to 53.5 Product R4830G1
VDC and possesses the characters of high efficiency, high power density,
Dimension 40.8(H)×95.5(W)×208(D)mm
walk-in start, hot-plug, complete protection, and low noise. The rectifier
Basic
adopts the latest power monitoring technology, implements the function Weight ≤1.5kg
specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling
output voltage of the rectifier can be adjusted through the host. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Features
Frequency 45~66Hz, rated: 50Hz/60Hz
Input
•• High efficiency: >96% feature Maximum input
≤13A
current
•• Input voltage range: 85~300VAC
•• Operating temperature range: -40ºC~75ºC Power factor ≥0.99

•• Total harmonic distortion(THD): ≤5% THD ≤5%

•• Hot-plug Output voltage 42~58VDC, default value: 53.5VDC
Output
•• Digital control feature
Output power 1600W(176~300VAC)
•• Intelligent electric meter
•• Communication over CAN Operating
-40ºC~+75ºC(non-derating under 55ºC)
temperature
•• Adjustment of voltage and current
•• Meet RoHS requirements Storage
-40ºC~+75ºC
temperature
Environmental
•• Passing the TUV, CE, CB, UL certifications
specifications
Relative humidity 5%~95%(non-condensing)

≤4000m(If the altitude is within the range of 2000m to

Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
65 protection
输出电压(V)

60
55
50 Input undervoltage
45 Protection point: <80VAC
40 protection
35
30
25 Output
20
15 Protection overvoltage 58.5~60.5VDC(can be set by PMU)
10
5
protection
0
0 5 10 15 20 25 30 35 40
Output short
输出电流(A) A long term short circuit is allowed.
Output feature circuit protection

Over-temperature
Protection point: ≥75ºC(167ºF)
98
% protection
96
94
Reliability MTBF >500,000hours
92
Audible
90 Specification ≤45dB(25ºC, full load)
noises
88
86
Passes TUV, CE, UL certifications
84
Catch the CB certificate
82
0% 20% 40% 60% 80% 100% Complies with
Safety
负载率
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
1800
输出功率(W)

1600 Safety/EMC/
EN55022 Class B
1400 Lightening
EN55024
1200 protection
1000
EN61000-3-2
800 EMC EN61000-3-3
600 ETSI EN300 386
400 ETSI EN301489
200
ITU-T K.20
0
-40 50 55 65 75
温度(℃) Lightening
YD 5098-2005 5KA
Power derating curve protection

7
Rectifier Module
R4830N2
Introduction Specifications
The R4830N2 is a digital rectifier with high efficiency and power density. Product R4830N2
It converts 85–300 V AC input voltage to 53.5 VDC output voltage. The
Dimension 41(H)×95.5(W)×208(D)mm
output voltage can be adjusted by the host. It performs comprehensive Basic
Weight ≤1.3kg
protection functions, supports soft start, and produces low noise. With specifications

the latest power monitoring technology, states of the rectifier and load Cooling Forced air cooling

are monitored in real time. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Features Frequency 45~66Hz, rated: 50Hz/60Hz

Input Maximum input
feature ≤10A
•• Efficiency >94% current
•• Input voltage range: 85~300VAC Power factor ≥0.99(full load)
•• Operating temperature range: -40ºC~75ºC ≤ 3.5% (full load)
THD
•• Total harmonic distortion(THD): ≤5% ≤5% (load≥50% )
•• Hot-plug Output voltage 42~58VDC, default value: 53.5VDC
•• Digital control Output
feature 1605 W (176–300 VAC)
Output power
•• Intelligent electric meter 755 W (85–175 VACdecreased linearly)
•• Communication over CAN Operating
-40ºC~+75ºC(non-derating under 55ºC)
•• Adjustment of voltage and current temperature

•• Meet RoHS requirements Storage

-40ºC~+75ºC
•• Passing the TUV, CE, CB, UL certifications Environmental temperature
specifications Relative humidity 5%~95%(non-condensing)

≤ 4000m(If the altitude is within the range of 3000m to

Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
70 protection
输出电压(V)

60

50
Input
undervoltage Protection point: <80VAC
40
protection
30

20 Output
Protection
10 overvoltage 56~60VDC(can be set by PMU)
0 protection
0 10 20 30 40
输出电流(A)
Output short
Output feature circuit protection
A long term short circuit is allowed

Over-temperature
% Protection function is available
98 protection
94
Reliability MTBF >500,000hours
90

86 Audible
Specification ≤45dB(25ºC, full load)
noises
82

78 Passes TUV, CE, UL certifications

74
Catch the CB certificate
0% 20% 40% 60% 80% 100% Complies with
负载率 Safety
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
1800
输出功率(W)

1600 Safety/EMC/
EN55022 Class B
1400 Lightening
EN55024
1200 protection
1000 EN61000-3-2
800 EMC EN61000-3-3
600 ETSI EN300 386
400 ETSI EN301489
200
ITU-T K.20
0
-40 -20 0 20 40 60 80
温度(℃) Lightening
5KA
Power derating curve protection

8
Rectifier Module
R4830G2
Introduction Specifications
The R4830G2 is a digital rectifier that converts the 80~300VAC to 53.5 Product R4830G2
VDC and possesses the characters of high efficiency, high power density,
Dimension 40.8(H)×105(W)×281(D)mm
walk-in start, hot-plug, complete protection, and low noise. The rectifier
Basic
Weight ≤1.8kg
adopts the latest power monitoring technology, implements the function specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling
output voltage of the rectifier can be adjusted through the host. Input voltage 80~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Features Input
Frequency 45~66Hz, rated: 50Hz/60Hz

feature Maximum input

≤12A
•• High efficiency: >96% current

•• Input voltage range: 80~300VAC Power factor ≥0.99(full load)

•• Operating temperature range: -40ºC~75ºC THD ≤5％(over 50% load)
•• Total harmonic distortion(THD): ≤5%
Output voltage 42~58VDC, default value: 53.5VDC
•• Hot-plug Output
feature
Output power 2000W(176~300VAC)
•• Digital control
•• Intelligent electric meter Operating
-40ºC~+75ºC(non-derating under 55ºC)
temperature
•• Communication over CAN
•• Adjustment of voltage and current Storage
-40ºC~+75ºC
temperature
•• Meet RoHS requirements Environmental
specifications
Relative humidity 5%~95%(non-condensing)
•• Passing the TUV,CE,CB,UL certifications
≤ 4000m(If the altitude is within the range of 2000m to
Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
protection
65
输出电压(V)

60
55 Input
50
45 undervoltage Protection point: <80VAC
40
35 protection
30
25
20 Output
Protection
15
10
overvoltage 56~60VDC(can be set by PMU)
5 protection
0
0 5 10 15 20 25 30 35 40
输出电流(A) Output short
A long term short circuit is allowed
Output feature circuit protection

Over-temperature
% Protection function is available
98 protection
96
94 Reliability MTBF >500,000hours
92
Audible
90
Specification ≤45dB(25ºC, full load)
88 noises
86
84
Passes TUV, CE, UL certifications
82
Catch the CB certificate
0% 20% 40% 60% 80% 100% Complies with
负载率 Safety
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
100% 2000W
Safety/EMC/
输出功率(W)

2000
EN55022 Class B
Lightening
EN55024
1500
1400W protection
EN61000-3-2
1000 EMC EN61000-3-3
ETSI EN300 386
500
ETSI EN301489
ITU-T K.20
0
-40 50 55 65 75 80
温度(℃) Lightening
YD 5098-2005 5KA
protection

9
Rectifier Module
R4850G2
Introduction Specifications
The R4850G2 is a digital rectifier that converts the 85~300VAC to 53.5 Product R4850G2
VDC and possesses the characters of high efficiency, high power density,
Dimension 40.8(H)×105(W)×281(D)mm
walk-in start, hot-plug, complete protection, and low noise. The rectifier
Basic
Weight ≤2kg
adopts the latest power monitoring technology, implements the function specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling

output voltage of the rectifier can be adjusted through the host. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Features Frequency 45~66Hz, rated: 50Hz/60Hz
Input
feature Rated input
•• High efficiency: >96% <17A
current
•• Input voltage range: 85~300VAC
Power factor ≥0.99
•• Operating temperature range: -40ºC~75ºC
•• Total harmonic distortion(THD): ≤5% THD ≤5%

•• Hot-plug Output
Output voltage 42~58VDC, default value: 53.5VDC
•• Digital control feature
Output power 3000W(176~300VAC)
•• Intelligent electric meter
Operating
•• Communication over CAN -40ºC~+75ºC(non-derating under 55ºC)
temperature
•• Adjustment of voltage and current
Storage
-40ºC~+75ºC
•• Meet RoHS requirements Environmental
temperature
•• Passing the TUV, CE, CB, UL certifications specifications
Relative humidity 5%~95%(non-condensing)

≤4000m(If the altitude is within the range of 3000m to

Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
protection
60
输出电压(V)

55 Input
50
45 undervoltage Protection point: <80VAC
40
35
protection
30
25
Output
20 Protection
15 overvoltage 58.5~60.5VDC(can be set by PMU)
10
5 protection
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
输出电流(A) Output short
A long term short circuit is allowed.
Output feature circuit protection

Over-temperature
% Protection point: ≥75ºC(167ºF)
98 protection
96
94 Reliability MTBF >500,000hours
92
90 Audible
Specification ≤55dB(40ºC, full load)
88 noises
86
84
Passes TUV, CE, UL certifications
82
Catch the CB certificate
80
0% 20% 40% 60% 80% 100% Complies with
Safety
负载率
UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
3500
输出功率(W)

Safety/EMC/
3000 EN55022 Class B
Lightening
EN55024
2500 protection
EN61000-3-2
2000
EMC EN61000-3-3
1500 ETSI EN300 386
1000
ETSI EN301489
ITU-T K.20
500
-40 50 55 65 70
温度(℃) Lightening
YD 5098-2005 5KA
Power derating curve protection

10
Rectifier Module
R4850N2
Introduction Specifications
The R4850N2 is a digital rectifier that converts the 85~300VAC to 53.5 Product R4850N2
VDC and possesses the characters of high efficiency, high power density,
Dimension 40.8(H)×105(W)×281(D)mm
walk-in start, hot-plug, complete protection, and low noise. The rectifier Basic
Weight ≤2kg
adopts the latest power monitoring technology, implements the function specifications
of monitoring the states of loads and the rectifier status in real time. The Cooling Forced air cooling

output voltage of the rectifier can be adjusted through the host. Input voltage 85~300VAC

Input mode 220VAC single phase(or 110VAC dual live lines)

Frequency 45~66Hz, rated: 50Hz/60Hz

Input
Features feature Maximum input
≤19A
current

•• High efficiency: >94% Power factor ≥0.99

•• Input voltage range: 85~300VAC THD ≤5%
•• Operating temperature range: -40ºC~75ºC Output voltage 42~58VDC, default value: 53.5VDC
Output
•• Total harmonic distortion(THD): ≤5% feature Output power 3000W(176~300VAC)
•• Hot-plug
Operating
•• Digital control -40ºC~+75ºC(non-derating under 50ºC)
temperature
•• Intelligent electric meter
Storage
•• Supports CAN communication -40ºC~+75ºC
Environmental temperature
•• Adjustment of voltage and current specifications Relative humidity 5%~95%(non-condensing)
•• Meet RoHS requirements
≤4000m(If the altitude is within the range of 3000m to
•• Passing the TUV, CE, CB, UL certifications Altitude range 4000m, the maximum operating temperature decreases by
1ºC as the altitude increases by 200m.)

Input overvoltage
Protection point: >300VAC
protection
60
Input
输出电压(V)

55
50 undervoltage Protection point: <80VAC
45
40 protection
35
30
25
Output
20 Protection overvoltage 58.5~60.5VDC(can be set by PMU)
15
10
protection
5
0 Output short
0 5 10 15 20 25 30 35 40 45 50 55 60 65 A long term short circuit is allowed.
输出电流(A) circuit protection
Output feature
Over-
temperature Protection point: ≥75ºC(167ºF)
%
95 protection
93
Reliability MTBF >500,000hours
91
Audible
89 Specification ≤55dB(40ºC, full load)
noises
87

85
Passes TUV, CE, UL certifications
Catch the CB certificate
83
Complies with
0% 20% 40% 60% 80% 100% Safety
负载率 UL60950-1
Efficiency curve certification
IEC60950-1
EN60950-1
CAN/CSA C22.2 No. 60950 -1
3500
输出功率(W)

Safety/EMC/
3000 EN55022 Class B
Lightening
2500 EN55024
protection
2000 EN61000-3-2
1500
EMC EN61000-3-3
ETSI EN300 386
1000
ETSI EN301489
500
ITU-T K.20
0
-40 -20 0 20 40 60 80
温度(℃) Lightening
YD 5098-2005 5KA
Power derating curve protection

11
Site Monitoring Unit
SMU01C
Introduction Function
SMU01C is a monitoring unit for site and power. It supports the
Product SMU01C
monitoring management of HUAWEI embedded power systems. It
can monitor and manage telecom power system, and provides site AC input voltage

monitoring function. LCD screen and keyboard are equipped in the unit DC output voltage
to realize man-machine interaction. It has a serial communication port to
Load current
realize local and remote monitoring. It has sensor ports to monitor the
Detection
ambient condition. Battery current

Battery temperatures

Features Ambient temperatures

Battery boost charge

•• Performs comprehensive power management and intelligent battery
management Battery floating charge
•• Provides 4 dry contact outputs
Battery tests
•• Provides 2 Boolean value inputs
•• Provides ports battery temperature sensor, ambient temperature sensor Battery current limiting

•• Supports English and Chinese as displayed language Battery

Battery temperature compensation
management
•• Supports hot plug
Battery overtemperature protection

Battery low voltage disconnection(BLVD) protection

Battery imbalance detection

Battery capacity detection

Energy saving
Intelligent rectifier module hibernation
management

Rectifier operating information

Rectifier power-on/off control

Rectifier
management
Rectifier output voltage limiting

Rectifier output current limiting

(1) Running indicator (2) Major alarm indicator Main AC input fault/over-voltage/under-voltage
(3) LCD (4) Four buttons
(5) Locking latch (6) DIN port DC output over-voltage/under-voltage

(7) Alarm port (8) Ambient temperature sensor port

Battery over-temperature/under-temperature
(9) Battery temperature sensor port (10) RS485/RS232 port
(11) COM port Ambient over-temperature/under-temperature

Ambient over-humidity/under-humidity

Water inrush/smoke alarm

LCD function Alarm Battery discharge

•• View active alarms and historical alarms
Battery charge over-current
•• View the running status of the system, such as the system voltage,
load current, and battery testing records Load fuse trip

•• Set system parameters, communications parameters, power supply Battery loop trip
unit(PSU) parameters and battery management parameters
•• Control the system status, such as choosing boost charge or floating Rectifier fault

charge and PSU dormancy charge Battery disconnection

•• Set parameters quickly, such as the battery string parameters, date,
Load disconnection
time, and communication addresses

12
Site Monitoring Unit
SMU02B
Introduction Function
SMU02B is a type of high-end monitoring unit for site and power. It can
Product SMU02B
monitor and manage telecom power system, and provides site monitoring
function. LCD screen and keyboard are equipped in the unit to realize man- AC input voltage
machine interaction. It has a serial communication port and an Ethernet port AC input current
to realize local and remote monitoring.SMU02B supports the monitoring
management of HUAWEI’s power system series, including embedded power, AC frequency

indoor power and outdoor power system. DC output voltage

Detection Total load current

Features Total battery current

Current of the nth battery(VRLA battery)

•• Performs comprehensive power management and battery management
•• Grid quality detection Battery temperature
•• Intelligent temperature control Ambient temperature & humidity
•• Support time, voltage, capacity disconnecting protection and LLVD1,
LLVD2, BLVD Energy Intelligent rectifier hibernation
conservation
•• Supports CAN communication management Peak clipping power consumption
•• Supports north monitoring ports CAN and FE. FE interface supports SNMP
Rectifier operation information
and allows safe access to WEB
•• Supports electronic label function Rectifier power-on/off control
•• Supports remote software upgrade
Rectifier output voltage limit
•• Supports downloading historical logs and statistics Rectifier
management
•• Provides five analog inputs(AI), twelve dry contact outputs(DO) and nine Rectifier output current limit
Boolean value inputs(DI)
Rectifier overvoltage protection
•• Provides ports to connect to the smoke sensor, door status sensor, water
sensor, battery temperature sensor, ambient temperature and humidity sensor Sequential rectifier startup
•• Supports multiple languages, such as English, Chinese, Turkish, Spanish,
Battery manual or automatic control
Portuguese and German
•• Supports hot plug Battery charging

Battery test

Battery current limiting

Battery
Battery temperature compensation
management
Battery high temperature protection

Multi-mode and multi-level disconnecting protection

Battery imbalance detection

(1) Running indicator (2) Minor alarm indicator
Battery capacity calculation/backup time calculation
(3) Major alarm indicator (4) LCD
(5) Locking latch (6) Button Internal fault
(7) USB port(reserved) (8) RS485/RS232 serial port (9) FE port
AC phase failure

AC/DC overvoltage/undervoltage

LCD function Load/battery fuse break

•• View active alarms and historical alarms Alarm Battery discharging
•• View the running status of the system, such as the system voltage,
load current, and battery testing records Load low voltage disconnection (LLVD1, LLVD2)

•• Set system parameters, communications parameters, power supply Battery low voltage disconnection (BLVD)
unit(PSU) parameters and battery management parameters
Battery temperature high/very high/low/very low
•• Control the system status, such as choosing boost charge or floating
charge and PSU dormancy charge Rectifier failure
•• Set parameters quickly, such as the battery string parameters, date,
No response for rectifier
time, and communication addresses

13
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademark Notice

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.

General Disclaimer HUAWEI TECHNOLOGIES CO., LTD.

The information in this document may contain predictive statements including, Huawei Industrial Base
without limitation, statements regarding the future financial and operating results, Bantian Longgang
future product portfolio, new technology, etc. There are a number of factors Shenzhen 518129, P.R. China
that could cause actual results and developments to differ materially from those Tel: +86-755-28780808
expressed or implied in the predictive statements. Therefore, such information Version No.: M3-035746-20140506-C-2.0
is provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice. www.huawei.com