14 13 12 11 10 9 8 7 6 5 4 3 2 1

NOTES:

1. DRAWINGS SHOULD BE READ AND NOT SCALED.

2. ALL DIMENSIONS/LEVELS ARE IN MILLIMETERS UNLESS
MENTIONED OTHERWISE.
3. ALL WALLS HAVE 200MM THICK BLOCK WALL UNLESS
SPECIFIED IN TENDER .
4. THIS DRAWINGS SHOULD BE READ IN CONJUNCTION WITH
J OTHER RELEVANT DRAWINGS FOR STRUCTURE AND J
SERVICES.
5. FLOOR LEVELS ARE IN MM.
6. ALL INTERNAL LEVELS ARE FINISHED FLOOR LEVELS. ALL EXIT
LANDINGS SHALL BE 10 - 12MM LOWER THAN THE INTERNAL
FLOOR FINISH LEVEL.
7. ALL MATERIALS/FINISHES/FIXTURES SHALL BE AS PER
SPECIFICATION AND DRAWINGS AND SHALL BE PRE
APPROVED BY CONSULTANT/ CLIENT.
8. ALL LVLS.(AMSL) ARE WITH RESPECT TO THE TOPOGRAPHIC
SURVEY. THE LEVEL TO BE CROSS CHECKED AT THE TIME OF
EXECUTION AND ANY DISCREPANCIES TO BE BROUGHT INTO
THE NOTICE OF THE CONSULTANTS.
9. THE OVERALL SITE DIMENSION & BUILDING DIMENSION ARE
APPROXIMATE, THE SAME TO BE VERIFIED AT SITE & PLANNED
ACCORDINGLY.
10. CHICKEN WIRE MESH TO BE PROVIDED AT ALL JUNCTIONS OF
RCC / SHEAR WALL AND BRICK WORK BEFORE PLASTERING
AS PER SPECIFICATIONS.
11. ALL STRUCTURAL MEMBER SIZES SHOULD BE CONFIRMED
FROM STRUCTURAL DRAWINGS.
12. ALL SHAFT SIZES SHOULD BE CONFIRMED FROM MEP
DRAWINGS
I 13. REINFORCEMENT IN SHAFTS TO CONTINUE AND CUT
WHEREVER NECESSARY FOR LAYING PIPES/CABLES ETC IN
ALL SHAFTS EXCEPT EXHAUST SHAFTS. ALL SHAFTS NEED TO

A
BE CLOSED AND FIRE SEALED AFTER LAYING SERVICES.ALL
THE FINISHING SHALL BE AS PER THE SCHEDULE.
14. REFER DOOR,WINDOW & GLAZING DETAIL SHEETS FOR SIZES
& DETAILS OF THEM.
15. ALL LANDSCAPED TERRACES SLAB SHALL BE MINIMUM 200MM
(CLEAR) DOWN FROM THE MAIN FLOOR SLAB. P''
16. MARGIN FLOOR FINISH OF ALL FLOORS EXCEPT BASEMENTS
SHALL BE 100MM. STAIRCASE FLOOR FINISH MARGIN SHALL BE

10560
45 TO 50MM, HOWEVER FINISH LEVEL OF ALL FLOOR
STAIRCASE TO MATCH PERFECTLY.
17. ALL SERVICE AREAS, LOBBIES ETC, IN BASEMENTS SHALL BE

15290
150MM HIGHER THAN PARKING AREAS.
18. LIFT PIT / HEAD ROOM ETC TO BE CONFIRMED WITH LIFT
VENDOR BEFORE EXECUTION.

O'' THE LEVELS TO BE CHECKED AT THE TIME OF EXECUTION AND

ANY DISCREPANCIES TO BE BROUGHT INTO NOTICE OF THE
EMPLOYER/ENGINEER.
P'
6710

4740
H NGL/EGL - NATURAL GROUND LEVEL/ EXISTING GROUND LEVEL H
FRL - FINISHED ROAD LEVEL
12640

FFL - FINISHED FLOOR LEVEL

O' LIFT P
ROOM
5930

D2A

RCC SHAFT COVER RCC SHAFT COVER

AT 1.2 MT HEIGHT AT 1.2 MT HEIGHT
RCC SHAFT COVER RCC SHAFT COVER
RCC SHAFT COVER
O AT 1.2 MT HEIGHT

17500
AT 1.2 MT HEIGHT
AT 1.2 MT HEIGHT
4850 5080

RCC SHAFT COVER RCC SHAFT COVER

SPACE FOR HVAC EQUIPMENT
N
AT 1.2 MT HEIGHT AT 1.2 MT HEIGHT TERRACE GARDEN
RCC SHAFT COVER RCC SHAFT COVER

64950
G AT 1.2 MT HEIGHT AT 1.2 MT HEIGHT G
RCC SHAFT COVER
M AT 1.2 MT HEIGHT
600mm wide CHAJJA L
3020

projection

7430 970 7800

FD3

2680x750

44150
3800

UP
C
D2A
W4 W4 600mm wide

HVAC
CHAJJA
ACCESSIBLE ACCESSIBLE projection
WINDOW WINDOW
ST-01 DN ST-03

1200x750
FD3

FHC
H LIFT HEAD ROOM LIFT HEAD ROOM
RCC SHAFT COVER FIRE TANK
J
AT 1.2 MT HEIGHT AS/MEP
66740

DUCT

I
43940
9520

B
DN
ACCESSIBLE ACCESSIBLE
WINDOW WINDOW
1
W4

600mm wide CHAJJA

W4
D2A

3 rd AREA FOR SOLAR PANNEL PROVISION AT LIFT

HEAD
ROOM
LIFT HEAD ROOM
projection
TERRACE LEVEL 600mm wide
CHAJJA
W4
ACCESSIBLE
WINDOW W4
DOMESTIC TANK
AS/MEP
projection

F
F ACCESSIBLE
WINDOW
600mm wide G F
CHAJJA
7190

5500 4710 6050

projection
600mm wide D2A
CHAJJA W4 ACCESSIBLE ST-02
projection WINDOW

LIFT HEAD ROOM

DN
FLUSHING TANK
AS/MEP D
RCC SHAFT COVER
E AT 1.2 MT HEIGHT
C'
5150 5320

FIRE TANK
DOMESTIC FLUSHING
(AS PER
TANK (AS PER TANK (AS PER
MEP)
MEP) MEP) C
B

5500
RCC SHAFT COVER
AT 1.2 MT HEIGHT
B RCC SHAFT COVER
AT 1.2 MT HEIGHT
RCC SHAFT COVER
AT 1.2 MT HEIGHT RCC SHAFT COVER
AT 1.2 MT HEIGHT
RCC SHAFT COVER C''
A AT 1.2 MT HEIGHT
E E
10160
10160

RCC SHAFT COVER RCC SHAFT COVER

AT 1.2 MT HEIGHT AT 1.2 MT HEIGHT

A'

A
D1 D1

3010 8210 11570 8750 1800 6200 6700 8000 15450 10000 10000 10000 10000 10000 10000 10000 10000 10000 6000 8480 8560 10020 5130 5030 4750
3010 199900 4750
207650
1' 1 2 3 4 4A 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 23'

C C

TERRACE FLOOR PLAN

B B

CONTRACT
NAME Integrated Development of Multimodal Facility Complex with Kuralagam at Broadway,
Chennai

EMPLOYER DESIGN CONSULTANT: PREPARED FULL NAME SIGNATURE DRAWING TITLE

E
R3 VOYANTS SOLUTIONS PVT LTD. MULTI MODAL FACILITY COMPLEX AT BROADWAY
R2
CHENNAI METRO RAIL LTD. 403, 4th Floor, Park Centra, Sector-30,
DRAWN BY MADHVI N S
A METROS, NH-8 Gurugram-122001, India TERRACE FLOOR PLAN A
ANNA SALAI,NANDANAM, DESIGNED BY NITASHA W
R1 Ph:0124-4598200-30,
CHENNAI-600035(INDIA) SCALE DATE OF ISSUE STAGE SHEET NO. REVISION NO.
Telefax : 0124-4019051 CHECKED BY NITASHA
R0 Email : [email protected]
1:300 12.08.2024 STATUTORY DRAWING TRF-110 R0
DRG.NO. SHEET
REV. PARTICULARS DRN. CHD. VER. DATE Website : www.voyants.in PARTNERING VISION APPROVED BY VANDANA VSPL/2223-054/MMFC/FIRE/ TRF-110 A1
14 13 12 11 10 9 8 7 6 5 4 3 2 1